[gentoo-user] Amarok xine engine error

[gentoo-user] Amarok xine engine error

[Stuart Howard]

Hey folks

I have found today that I cannot use the xine engine with amarok
anymore, I have recently updated kde and gcc [stable] while may/may
not be related however because I rarely reboot it could have been a
while since the offending package was merged.
The error message I recieve when trying to load the xine engine is
"/usr/kde/3.5/lib/kde3/libamarok_xine-engine.so no such file or dir"

However after some searching I have found this :
stuart@genstu ~ $ locate libamarok
/usr/kde/3.5/lib/kde3/libamarok_xine-engine.la
/usr/lib/kde3/libamarok_void-engine_plugin.la
/usr/lib/kde3/libamarok_void-engine_plugin.so
/usr/lib/kde3/libamarok_smb-device.la
/usr/lib/kde3/libamarok_smb-device.so
/usr/lib/kde3/libamarok_xine-engine.la
/usr/lib/kde3/libamarok_xine-engine.so

The point seems to be that amarok is looking in the wrong place or the
files and been merged and gone to the wrong place or a link is
required or ...

I usually find that problems link this are down to me in some way, so
if someone could suggesta  course of action I would appreciate it.
I have tried re-emerging xine-lib and amarok but no change so far,
though I am going around in circles now.

cheers
    stu

-- 
"There are 10 types of people in this world: those who understand
binary, those who don't"

--Unknown
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Amarok xine engine error

[Gian Domeni Calgeer]

Am Freitag, 17. November 2006 21:38 schrieb Stuart Howard:
> I have found today that I cannot use the xine engine with amarok
> anymore, I have recently updated kde and gcc [stable] while may/may
> not be related however because I rarely reboot it could have been a
> while since the offending package was merged.
> The error message I recieve when trying to load the xine engine is
> "/usr/kde/3.5/lib/kde3/libamarok_xine-engine.so no such file or dir"

Hi

Since I upgraded KDE, I also have this problem, so it is likely that it is 
related to the KDE 3.5.5 upgrade. 

Gian
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Amarok xine engine error

[Gian Domeni Calgeer]

Am Freitag, 17. November 2006 22:09 schrieb Gian Domeni Calgeer:
> Am Freitag, 17. November 2006 21:38 schrieb Stuart Howard:
> > I have found today that I cannot use the xine engine with amarok
> > anymore, I have recently updated kde and gcc [stable] while may/may
> > not be related however because I rarely reboot it could have been a
> > while since the offending package was merged.
> > The error message I recieve when trying to load the xine engine is
> > "/usr/kde/3.5/lib/kde3/libamarok_xine-engine.so no such file or dir"
>
> Hi
>
> Since I upgraded KDE, I also have this problem, so it is likely that it is
> related to the KDE 3.5.5 upgrade.
>
> Gian

BTW: I also re-emerged amarok and run revdep-rebuild, but without success.

Gian
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Amarok xine engine error

[Dale]

[-- Attachment #1: Type: text/plain, Size: 1794 bytes --]

Gian Domeni Calgeer wrote:
> Am Freitag, 17. November 2006 22:09 schrieb Gian Domeni Calgeer:
>   
>> Am Freitag, 17. November 2006 21:38 schrieb Stuart Howard:
>>     
>>> I have found today that I cannot use the xine engine with amarok
>>> anymore, I have recently updated kde and gcc [stable] while may/may
>>> not be related however because I rarely reboot it could have been a
>>> while since the offending package was merged.
>>> The error message I recieve when trying to load the xine engine is
>>> "/usr/kde/3.5/lib/kde3/libamarok_xine-engine.so no such file or dir"
>>>       
>> Hi
>>
>> Since I upgraded KDE, I also have this problem, so it is likely that it is
>> related to the KDE 3.5.5 upgrade.
>>
>> Gian
>>     
>
> BTW: I also re-emerged amarok and run revdep-rebuild, but without success.
>
> Gian
>   

Just to ask the obvious, you did check to make sure the USE didn't
change right?  Mine works and has this USE info:

> root@smoker / # emerge -pv amarok
>
> These are the packages that would be merged, in order:
>
> Calculating dependencies... done!
> [ebuild   R   ] media-sound/amarok-1.4.4  USE="arts kde opengl
> postgres -aac -debug -ifp -ipod -mtp -mysql -njb -noamazon -real
> -visualization -xinerama (-xmms%)" LINGUAS="-af -ar -az -bg -br -ca
> -cs -cy -da -de -el -en_GB -es -et -fi -fr -ga -gl -he -hi -hu -is -it
> -ja -ka -km -ko -lt -ms -nb -nl -nn -pa -pl -pt -pt_BR -ro -ru -rw -sk
> -sl -sq -sr -sr@Latn -sv -ta -tg -th -tr -uk -uz -zh_CN -zh_TW" 0 kB
>
> Total size of downloads: 0 kB
> root@smoker / #   

Maybe that will help.  I use KDE 3.5.5 as well and no problems here. 
There has to be something different between us.  I'll help all I can to
find out what that difference is, provided someone will give me commands
to use.  ;-)

Dale

:-)  :-)


[-- Attachment #2: Type: text/html, Size: 2400 bytes --]

Re: [gentoo-user] Amarok xine engine error

[Richard Fish]

On 11/17/06, Stuart Howard <stuart.g.howard@gmail.com> wrote:
> /usr/lib/kde3/libamarok_xine-engine.so

What does ldd on this file report?  Any broken links?  Maybe a
revdep-rebuild is in order?

-Richard
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Amarok xine engine error

[Ilya Hegai]

unmerge amarok
then remove all traces left like *.la files
reemerge amarok

2006/11/17, Stuart Howard <stuart.g.howard@gmail.com>:
> Hey folks
>
> I have found today that I cannot use the xine engine with amarok
> anymore, I have recently updated kde and gcc [stable] while may/may
> not be related however because I rarely reboot it could have been a
> while since the offending package was merged.
> The error message I recieve when trying to load the xine engine is
> "/usr/kde/3.5/lib/kde3/libamarok_xine-engine.so no such file or dir"
>
> However after some searching I have found this :
> stuart@genstu ~ $ locate libamarok
> /usr/kde/3.5/lib/kde3/libamarok_xine-engine.la
> /usr/lib/kde3/libamarok_void-engine_plugin.la
> /usr/lib/kde3/libamarok_void-engine_plugin.so
> /usr/lib/kde3/libamarok_smb-device.la
> /usr/lib/kde3/libamarok_smb-device.so
> /usr/lib/kde3/libamarok_xine-engine.la
> /usr/lib/kde3/libamarok_xine-engine.so
>
> The point seems to be that amarok is looking in the wrong place or the
> files and been merged and gone to the wrong place or a link is
> required or ...
>
> I usually find that problems link this are down to me in some way, so
> if someone could suggesta  course of action I would appreciate it.
> I have tried re-emerging xine-lib and amarok but no change so far,
> though I am going around in circles now.
>
> cheers
>     stu
>
> --
> "There are 10 types of people in this world: those who understand
> binary, those who don't"
>
> --Unknown
> --
> gentoo-user@gentoo.org mailing list
>
>


-- 
regards, Hegai Ilya
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Amarok xine engine error

[Stuart Howard]

I have done a revdep-rebuild but it does not emerge any packages,
however it does report this which seems relavent

Checking dynamic linking consistency...
  --snip--
  broken /usr/kde/3.5/lib/kde3/libamarok_xine-engine.la (requires
/usr/lib/liblcms.la)
  --snip--
 done.
  (/root/.revdep-rebuild.3_rebuild)

Assigning files to ebuilds... done.
  (/root/.revdep-rebuild.4_ebuilds)

Evaluating package order... done.
  (/root/.revdep-rebuild.5_order)

Dynamic linking on your system is consistent... All done.

ldd reports [though I have not used this before]
      ldd /usr/bin/amarok
        linux-gate.so.1 =>  (0xffffe000)
        libkdecore.so.4 => /usr/kde/3.5/lib/libkdecore.so.4 (0xb7ce6000)
        libDCOP.so.4 => /usr/kde/3.5/lib/libDCOP.so.4 (0xb7cb4000)
        libresolv.so.2 => /lib/libresolv.so.2 (0xb7c87000)
        libutil.so.1 => /lib/libutil.so.1 (0xb7c83000)
        libart_lgpl_2.so.2 => /usr/lib/libart_lgpl_2.so.2 (0xb7c6e000)
        libidn.so.11 => /usr/lib/libidn.so.11 (0xb7c3e000)
        libkdefx.so.4 => /usr/kde/3.5/lib/libkdefx.so.4 (0xb7c13000)
        libqt-mt.so.3 => /usr/qt/3/lib/libqt-mt.so.3 (0xb753c000)
        libmng.so.1 => /usr/lib/libmng.so.1 (0xb74dd000)
        libjpeg.so.62 => /usr/lib/libjpeg.so.62 (0xb74be000)
        libXi.so.6 => /usr/lib/libXi.so.6 (0xb74b6000)
        libXrandr.so.2 => /usr/lib/libXrandr.so.2 (0xb74b2000)
        libXcursor.so.1 => /usr/lib/libXcursor.so.1 (0xb74a8000)
        libXfixes.so.3 => /usr/lib/libXfixes.so.3 (0xb74a3000)
        libXft.so.2 => /usr/lib/libXft.so.2 (0xb7491000)
        libfontconfig.so.1 => /usr/lib/libfontconfig.so.1 (0xb7463000)
        libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0xb73f7000)
        libexpat.so.0 => /usr/lib/libexpat.so.0 (0xb73d8000)
        libpng12.so.0 => /usr/lib/libpng12.so.0 (0xb73b3000)
        libz.so.1 => /lib/libz.so.1 (0xb73a1000)
        libXext.so.6 => /usr/lib/libXext.so.6 (0xb7393000)
        libSM.so.6 => /usr/lib/libSM.so.6 (0xb738a000)
        libICE.so.6 => /usr/lib/libICE.so.6 (0xb7373000)
        libpthread.so.0 => /lib/libpthread.so.0 (0xb7360000)
        libXrender.so.1 => /usr/lib/libXrender.so.1 (0xb7357000)
        libX11.so.6 => /usr/lib/libX11.so.6 (0xb726c000)
        libXau.so.6 => /usr/lib/libXau.so.6 (0xb7269000)
        libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0xb7264000)
        libdl.so.2 => /lib/libdl.so.2 (0xb7260000)
        libstdc++.so.6 =>
/usr/lib/gcc/i686-pc-linux-gnu/4.1.1/libstdc++.so.6 (0xb7181000)
        libm.so.6 => /lib/libm.so.6 (0xb715b000)
        libgcc_s.so.1 =>
/usr/lib/gcc/i686-pc-linux-gnu/4.1.1/libgcc_s.so.1 (0xb7151000)
        libc.so.6 => /lib/libc.so.6 (0xb7035000)
        /lib/ld-linux.so.2 (0xb7f1e000)

Its nice to hear somone else with the issue [if you see what I mean],
if I take the -C ,delete old bits and emerge amarok approach where
should I be looking for scraps? [not to disagree by the way but how
does this acheive something different from just emerging amarok?]

stu


On 17/11/06, Ilya Hegai <vyacheslavovich@gmail.com> wrote:
> unmerge amarok
> then remove all traces left like *.la files
> reemerge amarok
>
> 2006/11/17, Stuart Howard <stuart.g.howard@gmail.com>:
> > Hey folks
> >
> > I have found today that I cannot use the xine engine with amarok
> > anymore, I have recently updated kde and gcc [stable] while may/may
> > not be related however because I rarely reboot it could have been a
> > while since the offending package was merged.
> > The error message I recieve when trying to load the xine engine is
> > "/usr/kde/3.5/lib/kde3/libamarok_xine-engine.so no such file or dir"
> >
> > However after some searching I have found this :
> > stuart@genstu ~ $ locate libamarok
> > /usr/kde/3.5/lib/kde3/libamarok_xine-engine.la
> > /usr/lib/kde3/libamarok_void-engine_plugin.la
> > /usr/lib/kde3/libamarok_void-engine_plugin.so
> > /usr/lib/kde3/libamarok_smb-device.la
> > /usr/lib/kde3/libamarok_smb-device.so
> > /usr/lib/kde3/libamarok_xine-engine.la
> > /usr/lib/kde3/libamarok_xine-engine.so
> >
> > The point seems to be that amarok is looking in the wrong place or the
> > files and been merged and gone to the wrong place or a link is
> > required or ...
> >
> > I usually find that problems link this are down to me in some way, so
> > if someone could suggesta  course of action I would appreciate it.
> > I have tried re-emerging xine-lib and amarok but no change so far,
> > though I am going around in circles now.
> >
> > cheers
> >     stu
> >
> > --
> > "There are 10 types of people in this world: those who understand
> > binary, those who don't"
> >
> > --Unknown
> > --
> > gentoo-user@gentoo.org mailing list
> >
> >
>
>
> --
> regards, Hegai Ilya
> --
> gentoo-user@gentoo.org mailing list
>
>


-- 
"There are 10 types of people in this world: those who understand
binary, those who don't"

--Unknown
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Amarok xine engine error

[Gian Domeni Calgeer]

Am Freitag, 17. November 2006 22:35 schrieb Stuart Howard:
> Its nice to hear somone else with the issue [if you see what I mean],
> if I take the -C ,delete old bits and emerge amarok approach where
> should I be looking for scraps? [not to disagree by the way but how
> does this acheive something different from just emerging amarok?]
>
> stu
>
> On 17/11/06, Ilya Hegai <vyacheslavovich@gmail.com> wrote:
> > unmerge amarok
> > then remove all traces left like *.la files
> > reemerge amarok

Hi

I did as Ilya Hegai suggested, i.e. I unmerged Amarok, did a 'find /usr -name 
*amarok*' and deleted all the .la files this returned, which were:

- /usr/kde/3.5/lib64/kde3/libamarok_void-engine_plugin.la
- /usr/kde/3.5/lib64/kde3/libamarok_gstengine_plugin.la
- /usr/kde/3.5/lib64/kde3/libamarok_xine-engine.la
- /usr/kde/3.5/lib64/kde3/konqsidebar_universalamarok.la

After having reemerged Amarok, it works. 

Gian
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Amarok xine engine error

[Stuart Howard]

I have followed the same procedure as suggested by Ilya Hegai and my
result was the same as Gian.
It works fine now, many thanks for the help.

stu

On 17/11/06, Gian Domeni Calgeer <gidoca@gmx.ch> wrote:
> Am Freitag, 17. November 2006 22:35 schrieb Stuart Howard:
> > Its nice to hear somone else with the issue [if you see what I mean],
> > if I take the -C ,delete old bits and emerge amarok approach where
> > should I be looking for scraps? [not to disagree by the way but how
> > does this acheive something different from just emerging amarok?]
> >
> > stu
> >
> > On 17/11/06, Ilya Hegai <vyacheslavovich@gmail.com> wrote:
> > > unmerge amarok
> > > then remove all traces left like *.la files
> > > reemerge amarok
>
> Hi
>
> I did as Ilya Hegai suggested, i.e. I unmerged Amarok, did a 'find /usr -name
> *amarok*' and deleted all the .la files this returned, which were:
>
> - /usr/kde/3.5/lib64/kde3/libamarok_void-engine_plugin.la
> - /usr/kde/3.5/lib64/kde3/libamarok_gstengine_plugin.la
> - /usr/kde/3.5/lib64/kde3/libamarok_xine-engine.la
> - /usr/kde/3.5/lib64/kde3/konqsidebar_universalamarok.la
>
> After having reemerged Amarok, it works.
>
> Gian
> --
> gentoo-user@gentoo.org mailing list
>
>


-- 
"There are 10 types of people in this world: those who understand
binary, those who don't"

--Unknown
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Amarok xine engine error

[Mick]

[-- Attachment #1: Type: text/plain, Size: 347 bytes --]

On Saturday 18 November 2006 00:23, Stuart Howard wrote:
> I have followed the same procedure as suggested by Ilya Hegai and my
> result was the same as Gian.
> It works fine now, many thanks for the help.

I don't know why this happened on your systems, but on mine a revdep-rebuild 
after yhe kde update solved it.

-- 
Regards,
Mick

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]