[gentoo-user] ati-driver update

[gentoo-user] ati-driver update

[oskar kapala]

Hi,

I have hp zv6000 (amd64) with ati radeon x200. I'm using:
x11-drivers/ati-drivers-8.24.8
or
x11-drivers/xf86-video-ati-6.5.8.0
Both work more less ok, but work.

I had >=x11-drivers/ati-drivers-8.25.18 in my
/etc/portage/package.mask because drivers later than 8.24.8 doesn't
support my card (it's checked by many till 8.27.10-r1)

When I've tried to emerge world it failed, because xorg-server and
xf86-video-ati require to upgrade this driver.

The problem is that if I upgrade my system including ati-drivers and
they won't work I won't be able to return to the old good one -
8.24.8. It's no longer in portage.

I really need a good advice.

Thanks,
oskar
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] ati-driver update

[Alan McKinnon]

On Tuesday 17 October 2006 13:47, oskar kapala wrote:
> Hi,
>
> I have hp zv6000 (amd64) with ati radeon x200. I'm using:
> x11-drivers/ati-drivers-8.24.8
> or
> x11-drivers/xf86-video-ati-6.5.8.0
> Both work more less ok, but work.
>
> I had >=x11-drivers/ati-drivers-8.25.18 in my
> /etc/portage/package.mask because drivers later than 8.24.8 doesn't
> support my card (it's checked by many till 8.27.10-r1)
>
> When I've tried to emerge world it failed, because xorg-server and
> xf86-video-ati require to upgrade this driver.
>
> The problem is that if I upgrade my system including ati-drivers and
> they won't work I won't be able to return to the old good one -
> 8.24.8. It's no longer in portage.

Oskar,

You don't say which version of xorg you have and want to upgrade to, so 
I've going to have to take a guess and assume it's the latest stable, 
and that your $ARCH is amd64.

x11-base/xorg-server-1.1.1-r1 is hardcode to require 
>= x11-drivers/xf86-video-ati-6.6.0
>=x11-drivers/ati-drivers-8.27.10

Not much you can do about that. You either have to find a version of the 
driver that does work and merge that, or start experimenting:

Create a local overlay in /usr/local/portage - there's info on how to do 
this in the gentoo docs. Copy a modified xorg-xserver ebuild over to 
the overlay and edit the driver requirements. Build, see if it works. 
If so, leave it and use the overlay instead of the main portage tree.

You can also find the older ebuilds on the net that worked for you and 
put them in the overlay as well. Someone mentioned a site here that 
does just that yesterday. Then at least you can revert to a known good 
version that portage won't nuke with every sync :-)

alan
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] ati-driver update

[Richard Fish]

On 10/17/06, oskar kapala <oskar.kapala@gmail.com> wrote:
> When I've tried to emerge world it failed, because xorg-server and
> xf86-video-ati require to upgrade this driver.

xorg 7.1 or later require newer drivers.  You either have to use the
xf86-video-ati (the open source drivers included with x.org), or mask
the new version of x.org.

If you want to update to the current x.org, and abandon the
proprietary ATI drivers, remove "fglrx" from VIDEO_CARDS in
/etc/make.conf.

-Richard
-- 
gentoo-user@gentoo.org mailing list