[gentoo-user] emerge troubles

[gentoo-user] emerge troubles

[Jorge Almeida]

I'm unable to emerge gcc:

 	17012 all allocated states,     101385 all allocated arcs
 	20258 all allocated alternative states
 	 4765 all transition comb vector els, 13107 all trans table els
 	 4765 all state alts comb vector els, 13107 all state alts table els
 	13107 all min delay table els
 	    0 locked states num

 	  transformation: 0.016001, building DFA: 7.968497
 	  DFA minimization: 0.468029, making insn equivalence: 0.000000
 	 all automaton generation: 8.536533, output: 0.144009
 	/bin/sh /var/tmp/portage/gcc-3.4.4-r1/work/gcc-3.4.4/gcc/move-if-change tmp-attrtab.c insn-attrtab.c
 	echo timestamp > s-attrtab
 	stage1/xgcc -Bstage1/ -B/usr/i686-pc-linux-gnu/bin/    -O2 -march=pentium4 -pipe -fprofile-generate -DIN_GCC   -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -pedantic -Wno-long-long -Wold-style-definition     -DHAVE_CONFIG_H    -I. -I. -I/var/tmp/portage/gcc-3.4.4-r1/work/gcc-3.4.4/gcc -I/var/tmp/portage/gcc-3.4.4-r1/work/gcc-3.4.4/gcc/. -I/var/tmp/portage/gcc-3.4.4-r1/work/gcc-3.4.4/gcc/../include  -c insn-attrtab.c \
 	  -o insn-attrtab.o

 	cc1: out of memory allocating 8579592 bytes after a total of 7716864 bytes
 	make[2]: *** [insn-attrtab.o] Error 1
 	make[2]: Leaving directory `/var/tmp/portage/gcc-3.4.4-r1/work/build/gcc'
 	make[1]: *** [stageprofile_build] Error 2
 	make[1]: Leaving directory `/var/tmp/portage/gcc-3.4.4-r1/work/build/gcc'
 	make: *** [profiledbootstrap] Error 2

 	!!! ERROR: sys-devel/gcc-3.4.4-r1 failed.
 	!!! Function gcc_do_make, Line 1339, Exitcode 2
 	!!! emake failed with profiledbootstrap
 	!!! If you need support, post the topmost build error, NOT this status message.

The problem appeared when emerging -DNu world. It failed with kpdf. Then
I tried to emerge binutils glibc gcc and it failed at gcc.

Assuming a hardware problem, I tried a script I read about on a recent
thread:
http://people.redhat.com/dledford/memtest.html

The script executed without a whisper.

The box has 1GB RAM, P4 3GHz, no overclocking. The system is up to date.
revdep-rebuild seems happy, except for wanting to re-emerge
openoffice-bin, always.

What else can I do? Is there some other test for hw failure? I can't try
memtest now (I'm away from the box) but it didn't report errors last time
I checked, not too long ago.


-- 
Jorge Almeida
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] emerge troubles

[Benno Schulenberg]

Jorge Almeida wrote:
>  	cc1: out of memory allocating 8579592 bytes after a total of
> 7716864 bytes

Swap not enabled?  Also, emerge --info output would be helpful.

Benno
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] emerge troubles

[Jorge Almeida]

On Tue, 14 Feb 2006, Benno Schulenberg wrote:

> Jorge Almeida wrote:
>>  	cc1: out of memory allocating 8579592 bytes after a total of
>> 7716864 bytes
>
> Swap not enabled?  Also, emerge --info output would be helpful.
>
Swap was enabled. 
$ emerge info
Portage 2.0.54 (default-linux/x86/2005.1, gcc-3.4.4, glibc-2.3.5-r2, 2.6.14-gentoo-r2 i686)
=================================================================
System uname: 2.6.14-gentoo-r2 i686 Intel(R) Pentium(R) 4 CPU 3.00GHz
Gentoo Base System version 1.6.14
dev-lang/python:     2.3.5, 2.4.2
sys-apps/sandbox:    1.2.12
sys-devel/autoconf:  2.13, 2.59-r6
sys-devel/automake:  1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r1
sys-devel/binutils:  2.16.1
sys-devel/libtool:   1.5.22
virtual/os-headers:  2.6.11-r2
ACCEPT_KEYWORDS="x86"
AUTOCLEAN="yes"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=pentium4 -pipe -fomit-frame-pointer"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3.4/env /usr/kde/3.4/share/config /usr/kde/3.4/shutdown /usr/kde/3/share/config /usr/lib/X11/xkb /usr/lib/mozilla/defaults/pref /usr/share/config /usr/share/texmf/dvipdfm/config/ /usr/share/texmf/dvips/config/ /usr/share/texmf/tex/generic/config/ /usr/share/texmf/tex/platex/config/ /usr/share/texmf/xdvi/ /var/qmail/control"
CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/env.d"
CXXFLAGS="-O2 -march=pentium4 -pipe -fomit-frame-pointer"
DISTDIR="/usr/portage/distfiles"
FEATURES="autoconfig distlocks sandbox sfperms strict"
GENTOO_MIRRORS="ftp://ftp.rnl.ist.utl.pt/pub/gentoo http://distfiles.gentoo.org http://www.ibiblio.org/pub/Linux/distributions/gentoo"
LANG="en_US"
MAKEOPTS="-j1"
PKGDIR="/usr/portage/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage"
USE="x86 X aalib acpi bash-completion bitmap-fonts bzip2 cdb cdparanoia cdr crypt cups curl gif gtk gtk2 imap imlib java jpeg jpeg2k kde maildir motif ncurses nls nptl nsplugin opengl pam pdflib perl pic png posix python qt readline recode ssl tiff truetype truetype-fonts type1-fonts xml zlib userland_GNU kernel_linux elibc_glibc"
Unset:  ASFLAGS, CTARGET, LC_ALL, LDFLAGS, LINGUAS, PORTDIR_OVERLAY


-- 
Jorge Almeida
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] emerge troubles

[Benno Schulenberg]

Jorge Almeida wrote:
> Swap was enabled.
> $ emerge info
> [...]

Looks fine.

Have you tried emerging gcc again, a few times, and does it fail 
every time in the same spot with the same error?  What error does 
kpdf give?  Does it too fail every time at the same place?  Have 
you tried closing memory-hungry apps like Firefox?  Have you maybe
changed the memory timings in the BIOS lately?  Perhaps it is time 
to dust off the computer on the inside and reseat the mem chips?

Benno
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] emerge troubles

[Jorge Almeida]

On Tue, 14 Feb 2006, Benno Schulenberg wrote:

> Jorge Almeida wrote:
>> Swap was enabled.
>> $ emerge info
>> [...]
>
> Looks fine.
>
> Have you tried emerging gcc again, a few times, and does it fail
> every time in the same spot with the same error?  What error does
Yes. I tried with CFLAGS and CXXFLAGS="", and with MAKEOPTS="-j1".
> kpdf give?  Does it too fail every time at the same place?  Have
 	config.status: executing depfiles commands

 	Good - your configure finished. Start make now

 	make  all-recursive
 	make[1]: Entering directory `/var/tmp/portage/kpdf-3.4.3-r4/work/kpdf-3.4.3'
 	Making all in doc
 	make[2]: Entering directory `/var/tmp/portage/kpdf-3.4.3-r4/work/kpdf-3.4.3/doc'
 	Making all in kpdf
 	make[3]: Entering directory `/var/tmp/portage/kpdf-3.4.3-r4/work/kpdf-3.4.3/doc/kpdf'
 	/usr/kde/3.4/bin/meinproc --check --cache index.cache.bz2 ./index.docbook
 	parser error : out of memory error
 	parser error : out of memory error
 	/bin/sh: line 1:  3831 Segmentation fault      /usr/kde/3.4/bin/meinproc --check --cache index.cache.bz2 ./index.docbook
 	make[3]: *** [index.cache.bz2] Error 139
 	make[3]: Leaving directory `/var/tmp/portage/kpdf-3.4.3-r4/work/kpdf-3.4.3/doc/kpdf'
 	make[2]: *** [all-recursive] Error 1
 	make[2]: Leaving directory `/var/tmp/portage/kpdf-3.4.3-r4/work/kpdf-3.4.3/doc'
 	make[1]: *** [all-recursive] Error 1
 	make[1]: Leaving directory `/var/tmp/portage/kpdf-3.4.3-r4/work/kpdf-3.4.3'
 	make: *** [all] Error 2

 	!!! ERROR: kde-base/kpdf-3.4.3-r4 failed.
 	!!! Function kde_src_compile, Line 217, Exitcode 2
 	!!! died running emake, kde_src_compile:make
 	!!! If you need support, post the topmost build error, NOT this status message.

(Always at the same place.)
> you tried closing memory-hungry apps like Firefox?  Have you maybe
No memory-hungry apps are open, since I'm working through ssh (and there
are no other human users).
> changed the memory timings in the BIOS lately?  Perhaps it is time
Never touched that. The computer is about 1 year old (but I think the
RAM is generic, so I would think about bad RAM, only I can't confirm it
through testing...)
> to dust off the computer on the inside and reseat the mem chips?
Perhaps, but that's a somewhat frightening idea!
>
> Benno
>
Thanks.

Jorge
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] emerge troubles

[Benno Schulenberg]

Jorge Almeida wrote:
>  	parser error : out of memory error
>  	/bin/sh: line 1:  3831 Segmentation fault     

Doesn't look good.  :(

> No memory-hungry apps are open, since I'm working through ssh
> (and there are no other human users).

Is this box always on?  Have you tried rebooting?  Maybe loads of 
memory have leaked away.

> > to dust off the computer on the inside and reseat the mem
> > chips?
>
> Perhaps, but that's a somewhat frightening idea!

If the RAM has gone bad, to replace it you will have to touch it 
anyway.  So, no harm in trying to wriggle it a bit first.  Touch 
and hold the case before touching the RAM strips.

Benno
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] emerge troubles

[Zac Slade]

On Tuesday 14 February 2006 17:43, Benno Schulenberg wrote:
> Jorge Almeida wrote:
> >  	parser error : out of memory error
> >  	/bin/sh: line 1:  3831 Segmentation fault
>
> Doesn't look good.  :(
No it doesn't, but there has to be a reason why he's out of memory...  What is 
the output of free, before emerge?  How about after it fails?  Can you give 
the output of the following commands:
cat /proc/sys/vm/swappiness
cat /proc/sys/vm/overcommit_memory
cat /proc/sys/vm/overcommit_ratio

Also try using "vmstat 5" in one window and attempting the emerge in another 
window.

What process is using the most memory right now?  (Check top sorted by 
memory).
> Is this box always on?  Have you tried rebooting?  Maybe loads of
> memory have leaked away.
WHOA!  Stop right there.  Perhaps we should help him diagnose his problem 
before using a shotgun.

> If the RAM has gone bad, to replace it you will have to touch it
> anyway.  So, no harm in trying to wriggle it a bit first.  Touch
> and hold the case before touching the RAM strips.
There is nothing in the information he has presented thus far to show that 
there are memory errors of any type.  He very well may be just running out of 
memory.  It happens.

Send back the extra information and let's get to the bottom of the issue.
-- 
Zac Slade
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] emerge troubles

[Jorge Almeida]

On Tue, 14 Feb 2006, Zac Slade wrote:

> On Tuesday 14 February 2006 17:43, Benno Schulenberg wrote:
>> Jorge Almeida wrote:
>>>  	parser error : out of memory error
>>>  	/bin/sh: line 1:  3831 Segmentation fault
>>
>> Doesn't look good.  :(
> No it doesn't, but there has to be a reason why he's out of memory...  What is
> the output of free, before emerge?  How about after it fails?  Can you give
> the output of the following commands:
> cat /proc/sys/vm/swappiness
> cat /proc/sys/vm/overcommit_memory
> cat /proc/sys/vm/overcommit_ratio
>
 	$ cat /proc/sys/vm/swappiness
 	60
 	$ cat /proc/sys/vm/overcommit_memory
 	0
 	$ cat /proc/sys/vm/overcommit_ratio
 	50
 	$ free
 	             total       used       free     shared    buffers     cached
 	Mem:       1035204     968140      67064          0     270248     538412
 	-/+ buffers/cache:     159480     875724
 	Swap:       996020        300     995720

Of course, this is the output of free _after_ the previous failed emerge attempts.
It seems RAM really was caught and not released... I can try rebooting,
but there is the possibility that the box won't boot, and I'm away...
Is there some way to find what's eating RAM?
> Also try using "vmstat 5" in one window and attempting the emerge in another
> window.
>
> What process is using the most memory right now?  (Check top sorted by
> memory).
 	$ top
 	top - 01:21:23 up 22 days, 17:29,  2 users,  load average: 0.00, 0.00, 0.00
 	Tasks: 120 total,   2 running, 118 sleeping,   0 stopped,   0 zombie
 	Cpu(s):  0.0% us,  0.0% sy,  0.0% ni, 99.7% id,  0.0% wa,  0.3% hi,  0.0% si
 	Mem:   1035204k total,   968760k used,    66444k free,   270684k buffers
 	Swap:   996020k total,      300k used,   995720k free,   538452k cached

 	  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
 	 8291 root      15   0  159m  29m 3056 S  0.0  3.0   5:05.74 X
 	24756 jorge     15   0 30592  25m 2576 S  0.0  2.5   0:06.52 pine
 	28731 jorge     16   0 20016  14m  14m S  0.0  1.4   0:19.34 imap
 	26923 root      15   0 21236  12m 9704 S  0.0  1.2   0:00.39 kdm_greet
 	24757 jorge     16   0  8436 6292 5984 S  0.0  0.6   0:01.85 imap
 	21961 jorge     16   0  8044 3992 2684 S  0.0  0.4   0:00.15 vim
 	 8259 root      16   0  5756 2852 1356 S  0.0  0.3   0:50.69 cupsd
 	24734 root      16   0  5944 1764 1440 S  0.0  0.2   0:00.01 sshd
 	24767 root      16   0  5948 1764 1440 S  0.0  0.2   0:00.01 sshd
 	 3588 root      15   0  2644 1560 1172 S  0.0  0.2   0:00.11 bash
 	24746 jorge     15   0  2924 1472 1164 S  0.0  0.1   0:00.02 bash
 	 6396 privoxy   15   0 36028 1464  784 S  0.0  0.1   0:07.90 privoxy
 	24785 jorge     15   0  2796 1456 1156 S  0.0  0.1   0:00.01 bash
 	24799 root      16   0  2664 1456 1156 S  0.0  0.1   0:00.00 bash


Jorge Almeida
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] emerge troubles

[Zac Slade]

On Tuesday 14 February 2006 19:25, Jorge Almeida wrote:
>  	$ cat /proc/sys/vm/swappiness
>  	60
>  	$ cat /proc/sys/vm/overcommit_memory
>  	0
>  	$ cat /proc/sys/vm/overcommit_ratio
>  	50
That was a long shot, but just wanted to make sure the system was allowing 
overcommit.

>  	$ free
>  	             total       used       free     shared    buffers     cached
>  	Mem:       1035204     968140      67064          0     270248     538412
>  	-/+ buffers/cache:     159480     875724
>  	Swap:       996020        300     995720
This seems within spec.  You have plenty of memory free.

> Of course, this is the output of free _after_ the previous failed emerge
> attempts. It seems RAM really was caught and not released... I can try
> rebooting, but there is the possibility that the box won't boot, and I'm
> away... Is there some way to find what's eating RAM?
If you don't have physical access to the system, don't reboot it.  It's not 
just a good rule of thumb, it's one you should live by (whenever possible).

> > What process is using the most memory right now?  (Check top sorted by
> > memory).
>
>  	$ top
>  	top - 01:21:23 up 22 days, 17:29,  2 users,  load average: 0.00, 0.00,
> 0.00 Tasks: 120 total,   2 running, 118 sleeping,   0 stopped,   0 zombie
> Cpu(s):  0.0% us,  0.0% sy,  0.0% ni, 99.7% id,  0.0% wa,  0.3% hi,  0.0%
> si Mem:   1035204k total,   968760k used,    66444k free,   270684k buffers
> Swap:   996020k total,      300k used,   995720k free,   538452k cached
>
>  	  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
>  	 8291 root      15   0  159m  29m 3056 S  0.0  3.0   5:05.74 X
>  	24756 jorge     15   0 30592  25m 2576 S  0.0  2.5   0:06.52 pine
>  	28731 jorge     16   0 20016  14m  14m S  0.0  1.4   0:19.34 imap
>  	26923 root      15   0 21236  12m 9704 S  0.0  1.2   0:00.39 kdm_greet
>  	24757 jorge     16   0  8436 6292 5984 S  0.0  0.6   0:01.85 imap
>  	21961 jorge     16   0  8044 3992 2684 S  0.0  0.4   0:00.15 vim
>  	 8259 root      16   0  5756 2852 1356 S  0.0  0.3   0:50.69 cupsd
>  	24734 root      16   0  5944 1764 1440 S  0.0  0.2   0:00.01 sshd
>  	24767 root      16   0  5948 1764 1440 S  0.0  0.2   0:00.01 sshd
>  	 3588 root      15   0  2644 1560 1172 S  0.0  0.2   0:00.11 bash
>  	24746 jorge     15   0  2924 1472 1164 S  0.0  0.1   0:00.02 bash
>  	 6396 privoxy   15   0 36028 1464  784 S  0.0  0.1   0:07.90 privoxy
>  	24785 jorge     15   0  2796 1456 1156 S  0.0  0.1   0:00.01 bash
>  	24799 root      16   0  2664 1456 1156 S  0.0  0.1   0:00.00 bash
Well nothing really stands out here....  There are multiple imap processes 
open, but really you have plenty of memory.

Just an absolute blind stab in the dark.....  what does df -h give you?  
Anything interesting in dmesg?  And just to make sure we have PLENTY of 
information here, can we get the end of emerge.log (some context prior to the 
error message).

-- 
Zac Slade
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] emerge troubles

[Richard Fish]

On 2/14/06, Jorge Almeida <jalmeida@math.ist.utl.pt> wrote:
>         $ free
>                      total       used       free     shared    buffers     cached
>         Mem:       1035204     968140      67064          0     270248     538412
>         -/+ buffers/cache:     159480     875724
>         Swap:       996020        300     995720
>
> Of course, this is the output of free _after_ the previous failed emerge attempts.
> It seems RAM really was caught and not released... I can try rebooting,

No, it wasn't.  The important line is the "+/- buffers/cache", which
shows you have 850M free.  The rest of your used memory is buffers or
cached programs, all of which can be swapped back out.

-Richard

-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] emerge troubles

[Richard Fish]

On 2/14/06, Zac Slade <krakrjak@volumehost.net> wrote:
> Just an absolute blind stab in the dark.....  what does df -h give you?
> Anything interesting in dmesg?  And just to make sure we have PLENTY of
> information here, can we get the end of emerge.log (some context prior to the
> error message).

Also, to test whether your system can make large memory allocations, you can do:

python -c "s='x'*(4*(1024*1024))"
python -c "s='x'*(8*(1024*1024))"
python -c "s='x'*(16*(1024*1024))"
python -c "s='x'*(32*(1024*1024))"
python -c "s='x'*(64*(1024*1024))"
python -c "s='x'*(128*(1024*1024))"
python -c "s='x'*(256*(1024*1024))"

The above commands will try to allocate memory from 4M to 256M.

-Richard

-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] emerge troubles

[Jorge Almeida]

  On Tue, 14 Feb 2006, Zac Slade wrote:
> Just an absolute blind stab in the dark.....  what does df -h give you?
 	$ df -h
 	Filesystem            Size  Used Avail Use% Mounted on
 	/dev/hda3             2.0G  281M  1.7G  15% /
 	udev                  506M  300K  506M   1% /dev
 	/dev/hda5             2.0G  338M  1.6G  18% /var
 	/dev/hda6             9.9G  3.6G  5.8G  39% /usr
 	/dev/hdb2             7.6G  3.0G  4.2G  42% /home
 	/dev/hdb6              23G  6.3G   16G  30% /home/jorge/bulk
 	/dev/hdb1             7.8G  1.6G  5.9G  21% /home/jorge/bulk/backup
 	/dev/hda7             2.0G  392M  1.5G  21% /local
 	/dev/hda8              10G  1.4G  8.6G  15% /local/mail
 	/dev/hdb3             7.6G  5.8G  1.4G  81% /local/port
 	/local/port/portage   7.6G  5.8G  1.4G  81% /usr/portage
 	/local/port/var_tmp   7.6G  5.8G  1.4G  81% /var/tmp/portage
 	/local/run/qmail/varqmail
 	                      2.0G  392M  1.5G  21% /var/qmail
 	/local/usr            2.0G  392M  1.5G  21% /usr/local
 	shm                   506M     0  506M   0% /dev/shm

> Anything interesting in dmesg?  And just to make sure we have PLENTY of
the bottom of dmesg seems strange:
 	EXT3-fs: mounted filesystem with ordered data mode.
 	hw_random: RNG not detected
 	r8169: eth0: link up
 	ip_tables: (C) 2000-2002 Netfilter core team
 	ip_conntrack version 2.3 (8191 buckets, 65528 max) - 216 bytes per conntrack
 	ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
 	ipt_owner: pid, sid and command matching not supported anymore
 	spurious 8259A interrupt: IRQ7.
 	ipt_owner: pid, sid and command matching not supported anymore
 	ipt_owner: pid, sid and command matching not supported anymore
 	ipt_owner: pid, sid and command matching not supported anymore
 	ipt_owner: pid, sid and command matching not supported anymore

 	(Many repeated lines like the latter.)
> information here, can we get the end of emerge.log (some context prior to the
> error message).
I suppose you mean the output of emerge? The contents of
/var/log/emerge.log are laconic. Here it goes:
 	In file included from /var/tmp/portage/gcc-3.4.4-r1/work/gcc-3.4.4/gcc/libgcov.c:37:
 	/var/tmp/portage/gcc-3.4.4-r1/work/gcc-3.4.4/gcc/tsystem.h:40:1: warning: this is the location of the previous definition
 	/var/tmp/portage/gcc-3.4.4-r1/work/gcc-3.4.4/gcc/doc//cppopts.texi:137: warning: @strong{Note...} produces a spurious cross-reference in Info; reword to avoid that.
 	/var/tmp/portage/gcc-3.4.4-r1/work/gcc-3.4.4/gcc/doc//cppopts.texi:345: warning: @strong{Note...} produces a spurious cross-reference in Info; reword to avoid that.
 	mv: cannot stat `libgcc/*.os': No such file or directory
 	mv: cannot stat `s-crt0': No such file or directory
 	mv: cannot stat `crtbegin.o': No such file or directory
 	mv: cannot stat `crtbeginS.o': No such file or directory
 	mv: cannot stat `crtbeginT.o': No such file or directory
 	mv: cannot stat `crtend.o': No such file or directory
 	mv: cannot stat `crtendS.o': No such file or directory
 	mv: cannot stat `gcc-cross': No such file or directory
 	mv: cannot stat `protoize': No such file or directory
 	mv: cannot stat `unprotoize': No such file or directory
 	mv: cannot stat `specs': No such file or directory
 	mv: cannot stat `collect2': No such file or directory
 	mv: cannot stat `gcov': No such file or directory
 	mv: cannot stat `gcov-dump': No such file or directory
 	mv: cannot stat `*.[0-9][0-9].*': No such file or directory
 	mv: cannot stat `*.[si]': No such file or directory
 	mv: cannot stat `g++-cross': No such file or directory
 	mv: cannot stat `cc1plus': No such file or directory
 	make[2]: [stage1-start] Error 1 (ignored)
 	cp: cannot stat `libunwind.a': No such file or directory
 	cp: cannot stat `libunwind*.so': No such file or directory
 	make[2]: [stage1-start] Error 1 (ignored)
 	mv: cannot stat `cp/*.o': No such file or directory
 	make[2]: [c++.stage1] Error 1 (ignored)
 	gengtype-lex.c: In function `yy_get_next_buffer':
 	gengtype-lex.c:2412: warning: old-style parameter declaration
 	gengtype-lex.c: In function `yy_get_previous_state':
 	gengtype-lex.c:2544: warning: old-style parameter declaration
 	gengtype-lex.c: In function `input':
 	gengtype-lex.c:2657: warning: old-style parameter declaration
 	/usr/share/bison/bison.simple: In function `yyparse':
 	/usr/share/bison/bison.simple:379: warning: old-style parameter declaration
 	warning: structure `reg_info_def' used but not defined
 	warning: structure `basic_block_def' used but not defined
 	warning: structure `answer' used but not defined
 	warning: structure `cpp_macro' used but not defined
 	warning: structure `reg_info_def' used but not defined
 	warning: structure `basic_block_def' used but not defined
 	warning: structure `answer' used but not defined
 	warning: structure `cpp_macro' used but not defined
 	insn-conditions.c:739: warning: string length `534' is greater than the length `509' ISO C89 compilers are required to support
 	insn-conditions.c:1025: warning: string length `533' is greater than the length `509' ISO C89 compilers are required to support
 	insn-conditions.c:1565: warning: string length `597' is greater than the length `509' ISO C89 compilers are required to support
 	/usr/share/bison/bison.simple: In function `yyparse':
 	/usr/share/bison/bison.simple:379: warning: old-style parameter declaration
 	/usr/share/bison/bison.simple:923: warning: label `yyoverflowlab' defined but not used

 	Automaton `pentium'
 	       48 NDFA states,            138 NDFA arcs
 	       48 DFA states,             138 DFA arcs
 	       20 minimal DFA states,      82 minimal DFA arcs
 	      158 all insns         17 insn equivalence classes
 	   88 transition comb vector els,   340 trans table els: use comb vect
 	   88 state alts comb vector els,   340 state alts table els: use comb vect
 	  340 min delay table els, compression factor 2

 	Automaton `pentium_fpu'
 	       80 NDFA states,            172 NDFA arcs
 	       80 DFA states,             172 DFA arcs
 	       75 minimal DFA states,     162 minimal DFA arcs
 	      158 all insns          8 insn equivalence classes
 	  164 transition comb vector els,   600 trans table els: use comb vect
 	  164 state alts comb vector els,   600 state alts table els: use comb vect
 	  600 min delay table els, compression factor 1

 	Automaton `athlon'
 	      518 NDFA states,           1668 NDFA arcs
 	      518 DFA states,            1668 DFA arcs
 	       76 minimal DFA states,     328 minimal DFA arcs
 	      158 all insns         10 insn equivalence classes
 	  359 transition comb vector els,   760 trans table els: use simple vect
 	  359 state alts comb vector els,   760 state alts table els: use simple vect
 	  760 min delay table els, compression factor 2

 	Automaton `athlon_load'
 	      162 NDFA states,            855 NDFA arcs
 	      162 DFA states,             855 DFA arcs
 	      162 minimal DFA states,     855 minimal DFA arcs
 	      158 all insns         10 insn equivalence classes
 	 1047 transition comb vector els,  1620 trans table els: use simple vect
 	 1047 state alts comb vector els,  1620 state alts table els: use simple vect
 	 1620 min delay table els, compression factor 2

 	Automaton `athlon_mult'
 	       16 NDFA states,             48 NDFA arcs
 	       16 DFA states,              48 DFA arcs
 	       16 minimal DFA states,      48 minimal DFA arcs
 	      158 all insns          4 insn equivalence classes
 	   50 transition comb vector els,    64 trans table els: use simple vect
 	   50 state alts comb vector els,    64 state alts table els: use simple vect
 	   64 min delay table els, compression factor 2

 	Automaton `athlon_fp'
 	    15522 NDFA states,          99908 NDFA arcs
 	    15522 DFA states,           99908 DFA arcs
 	      463 minimal DFA states,    3038 minimal DFA arcs
 	      158 all insns         21 insn equivalence classes
 	 3057 transition comb vector els,  9723 trans table els: use comb vect
 	 3057 state alts comb vector els,  9723 state alts table els: use comb vect
 	 9723 min delay table els, compression factor 1

 	17012 all allocated states,     101385 all allocated arcs
 	20258 all allocated alternative states
 	 4765 all transition comb vector els, 13107 all trans table els
 	 4765 all state alts comb vector els, 13107 all state alts table els
 	13107 all min delay table els
 	    0 locked states num

 	  transformation: 0.012001, building DFA: 7.952498
 	  DFA minimization: 0.468029, making insn equivalence: 0.004000
 	 all automaton generation: 8.528533, output: 0.144009

 	cc1: out of memory allocating 8579592 bytes after a total of 7716864 bytes
 	make[2]: *** [insn-attrtab.o] Error 1
 	make[1]: *** [stageprofile_build] Error 2
 	make: *** [profiledbootstrap] Error 2

 	!!! ERROR: sys-devel/gcc-3.4.4-r1 failed.
 	!!! Function gcc_do_make, Line 1339, Exitcode 2
 	!!! emake failed with profiledbootstrap
 	!!! If you need support, post the topmost build error, NOT this status message.

>
>

-- 
Jorge Almeida
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] emerge troubles

[Jorge Almeida]

On Tue, 14 Feb 2006, Richard Fish wrote:

> Also, to test whether your system can make large memory allocations, you can do:
>
> python -c "s='x'*(4*(1024*1024))"
> python -c "s='x'*(8*(1024*1024))"
> python -c "s='x'*(16*(1024*1024))"
> python -c "s='x'*(32*(1024*1024))"
> python -c "s='x'*(64*(1024*1024))"
> python -c "s='x'*(128*(1024*1024))"
> python -c "s='x'*(256*(1024*1024))"
>
> The above commands will try to allocate memory from 4M to 256M.
>
> -Richard
>
>
 	root@jmaa ~ $ python -c "s='x'*(4*(1024*1024))"
 	~
 	root@jmaa ~ $ python -c "s='x'*(8*(1024*1024))"
 	~
 	root@jmaa ~ $ python -c "s='x'*(16*(1024*1024))"
 	~
 	root@jmaa ~ $ python -c "s='x'*(32*(1024*1024))"
 	~
 	root@jmaa ~ $ python -c "s='x'*(64*(1024*1024))"
 	Traceback (most recent call last):
 	  File "<string>", line 1, in ?
 	MemoryError
 	~
 	root@jmaa ~ $ python -c "s='x'*(128*(1024*1024))"
 	Traceback (most recent call last):
 	  File "<string>", line 1, in ?
 	MemoryError
 	~
 	root@jmaa ~ $ python -c "s='x'*(256*(1024*1024))"
 	Traceback (most recent call last):
 	  File "<string>", line 1, in ?
 	MemoryError

<SIGH>

Thanks,

Jorge
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] emerge troubles

[Richard Fish]

On 2/14/06, Jorge Almeida <jalmeida@math.ist.utl.pt> wrote:
>         root@jmaa ~ $ python -c "s='x'*(4*(1024*1024))"
>         ~
>         root@jmaa ~ $ python -c "s='x'*(8*(1024*1024))"
>         ~
>         root@jmaa ~ $ python -c "s='x'*(16*(1024*1024))"
>         ~
>         root@jmaa ~ $ python -c "s='x'*(32*(1024*1024))"
>         ~
>         root@jmaa ~ $ python -c "s='x'*(64*(1024*1024))"
>         Traceback (most recent call last):
>           File "<string>", line 1, in ?
>         MemoryError

Any chance this is a resource limit issue?

ulimit -l -m

-Richard

-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] emerge troubles

[Richard Fish]

On 2/14/06, Richard Fish <bigfish@asmallpond.org> wrote:
> ulimit -l -m

Or better: ulimit -a

-Richard

-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] emerge troubles

[Jorge Almeida]

On Tue, 14 Feb 2006, Richard Fish wrote:

> Any chance this is a resource limit issue?
>
> ulimit -l -m
>
Nope...
 	$ ulimit -l -m
 	max locked memory       (kbytes, -l) 32
 	max memory size         (kbytes, -m) unlimited


Jorge
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] emerge troubles

[Jorge Almeida]

On Tue, 14 Feb 2006, Richard Fish wrote:

> Or better: ulimit -a
$ ulimit -a
core file size          (blocks, -c) 0
data seg size           (kbytes, -d) 58593
file size               (blocks, -f) unlimited
pending signals                 (-i) 8191
max locked memory       (kbytes, -l) 32
max memory size         (kbytes, -m) unlimited
open files                      (-n) 1024
pipe size            (512 bytes, -p) 8
POSIX message queues     (bytes, -q) 819200
stack size              (kbytes, -s) 58593
cpu time               (seconds, -t) unlimited
max user processes              (-u) 8191
virtual memory          (kbytes, -v) 58593
file locks                      (-x) unlimited

>

Jorge
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] emerge troubles

[Richard Fish]

On 2/14/06, Jorge Almeida <jalmeida@math.ist.utl.pt> wrote:
> On Tue, 14 Feb 2006, Richard Fish wrote:
> data seg size           (kbytes, -d) 58593
> virtual memory          (kbytes, -v) 58593

These are preventing any process spawned by this user from allocating
more than 58593 bytes of memory (which is why 32M works, and 64M
fails)

Try:
ulimit -d unlimited
ulimit -v unlimited

-Richard

-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] emerge troubles

[Jorge Almeida]

On Tue, 14 Feb 2006, Richard Fish wrote:

> On 2/14/06, Jorge Almeida <jalmeida@math.ist.utl.pt> wrote:
>> On Tue, 14 Feb 2006, Richard Fish wrote:
>> data seg size           (kbytes, -d) 58593
>> virtual memory          (kbytes, -v) 58593
>
> These are preventing any process spawned by this user from allocating
> more than 58593 bytes of memory (which is why 32M works, and 64M
> fails)
>
> Try:
> ulimit -d unlimited
> ulimit -v unlimited
>
> -Richard
>
>
Well, so that was it! I just finished compiling gcc.
I wonder why those limits were set for user root?!
My home computer didn't have such restriction, and I recently made a new
install on the computer that had all this problem, so I'm sure I didn't
do it myself and forgot it...

It's a relief to know it's not hw problem!

Thank you, and thanks also to Benno and Zac.

Jorge
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] emerge troubles

[Zac Slade]

On Tuesday 14 February 2006 21:14, Jorge Almeida wrote:
> Well, so that was it! I just finished compiling gcc.
> I wonder why those limits were set for user root?!
> My home computer didn't have such restriction, and I recently made a new
> install on the computer that had all this problem, so I'm sure I didn't
> do it myself and forgot it...
Check /etc/limits to see what the defaults are.  I'd also look at any shell 
scripts that are being sourced during login (/etc/profile ~/.bashrc, etc.).

> It's a relief to know it's not hw problem!
Memory allocation is one of those things that usually isn't.  Normally you'd 
see physical memory errors as programs randomly crashing (like the kernel, 
with no PANIC).  You also might notice when you start the system up that it 
is reporting less memory than you have installed.

> Thank you, and thanks also to Benno and Zac.
Very appreciated.
-- 
Zac Slade
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] emerge troubles

[Jorge Almeida]

On Wed, 15 Feb 2006, Zac Slade wrote:

> Check /etc/limits to see what the defaults are.  I'd also look at any shell
> scripts that are being sourced during login (/etc/profile ~/.bashrc, etc.).
>
/etc/limits is completely commented out. Couldn't find anything in
/etc/profile nor in /etc/bashrc. And ~/.bashrc only has what I put there
after Richard's reply.

Cheers.

Jorge Almeida
-- 
gentoo-user@gentoo.org mailing list