From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from lists.gentoo.org ([140.105.134.102] helo=robin.gentoo.org) by nuthatch.gentoo.org with esmtp (Exim 4.50) id 1EeEV4-0003TH-Gx for garchives@archives.gentoo.org; Mon, 21 Nov 2005 16:26:38 +0000 Received: from robin.gentoo.org (localhost [127.0.0.1]) by robin.gentoo.org (8.13.5/8.13.5) with SMTP id jALGPULS019936; Mon, 21 Nov 2005 16:25:30 GMT Received: from wproxy.gmail.com (wproxy.gmail.com [64.233.184.205]) by robin.gentoo.org (8.13.5/8.13.5) with ESMTP id jALGLbKh000534 for ; Mon, 21 Nov 2005 16:21:37 GMT Received: by wproxy.gmail.com with SMTP id i24so414394wra for ; Mon, 21 Nov 2005 08:21:36 -0800 (PST) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:sender:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=KSX2YKJV9+SKfHzFOl+AkptpzwwAqos8xXm/g4PlyVItUwDSBYWW5xPJ3cYR8RHuLwDtKrTXIv5AuN0ET9IcAvmvbbhy7amiscAFkBwJJMeW21Mtw4XpJ4+ZHwzf8+DUW2egtMkgsoiAjLduk62CZMy2r4M3iiQYn8f8o2D14G0= Received: by 10.54.107.10 with SMTP id f10mr1930733wrc; Mon, 21 Nov 2005 07:18:11 -0800 (PST) Received: by 10.54.126.13 with HTTP; Mon, 21 Nov 2005 07:18:11 -0800 (PST) Message-ID: <7573e9640511210718g145435e9y8e57e8b79c19387d@mail.gmail.com> Date: Mon, 21 Nov 2005 08:18:11 -0700 From: Richard Fish Sender: richard.j.fish@gmail.com To: gentoo-user@lists.gentoo.org Subject: Re: [gentoo-user] confused udev? In-Reply-To: Precedence: bulk List-Post: List-Help: List-Unsubscribe: List-Subscribe: List-Id: Gentoo Linux mail X-BeenThere: gentoo-user@gentoo.org Reply-to: gentoo-user@lists.gentoo.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Disposition: inline References: <200511171454.37956.ext-dirk.heinrichs@nokia.com> <200511181121.52647.ext-dirk.heinrichs@nokia.com> <7573e9640511191821y4c19c594p2d818fc7cb624ff5@mail.gmail.com> Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from quoted-printable to 8bit by robin.gentoo.org id jALGLbKh000534 X-Archives-Salt: 53bbe940-2857-4228-bed9-932ee81769ab X-Archives-Hash: c99a9a147bb5f57aa16071fda15e788c On 11/20/05, Jorge Almeida wrote: > On Sat, 19 Nov 2005, Richard Fish wrote: > > > > According to the dmesg output you posted earlier, your memory stick is > > not partitioned. This is ok, some are, some are not. You can confirm > > this by taking a look at /proc/partitions when it is inserted, or the > > output of "fdisk -l". So, only getting /dev/plextor_memstick is > > probably correct, and you should mount that, not plextor_memstick1. > > > I'm out of office for the weekend, so I can't insert the stick and > confirm. But the stick is partitioned with a unique partition with vfat. > I tried to mount it and mount gave the "no such device" complaint. But I > may be forgetting something. Earlier you posted: usb 1-7: reset high speed USB device using ehci_hcd and address 4 Vendor: PLEXTOR Model: PlexFlash-2 Rev: 5.02 Type: Direct-Access ANSI SCSI revision: 00 usb 1-7: reset high speed USB device using ehci_hcd and address 4 usb 1-7: reset high speed USB device using ehci_hcd and address 4 usb 1-7: reset high speed USB device using ehci_hcd and address 4 usb 1-7: reset high speed USB device using ehci_hcd and address 4 usb 1-7: reset high speed USB device using ehci_hcd and address 4 usb 1-7: reset high speed USB device using ehci_hcd and address 4 sdb: Write Protect is on sdb: Mode Sense: 45 00 80 08 sdb: assuming drive cache: write through Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 0 usb-storage: device scan complete If the key is partitioned, just before the "Attached ..." line, you should see a listing of the partitions. For example: usb-storage: waiting for device to settle before scanning Vendor: I-Stick2 Model: IntelligentStick Rev: 2.00 Type: Direct-Access ANSI SCSI revision: 02 ready SCSI device sda: 2047488 512-byte hdwr sectors (1048 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 00 sda: assuming drive cache: write through SCSI device sda: 2047488 512-byte hdwr sectors (1048 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 00 sda: assuming drive cache: write through sda: sda1 sda2 Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0 usb-storage: device scan complete So if it really is partitioned, we'll have to figure out why the kernel is not seeing your partition table. I would be interested to see the output of 'fdisk -l /dev/sda' with the stick inserted. > What about the kernel config? I posted the file as you suggested. Does > it look OK? Looks ok to me. -Richard -- gentoo-user@gentoo.org mailing list