Re: [gentoo-user] Bluetooth speakers

[Michael <confabulate@kintzios.com>]

[-- Attachment #1: Type: text/plain, Size: 1825 bytes --]

On Tuesday, 10 May 2022 09:17:32 BST Peter Humphrey wrote:

> Indeed, and I've now replaced the speakers, the 3.5mm cable and the USB
> dongle - every sound component is new. When I tested it yesterday in the
> plasma control panel, I heard one "front left", very loud, and then nothing.
> I thought some BT stuff must still be lying around somewhere, so I've
> installed a new system from scratch, using a kernel .config from before I
> started with BT, and today I still hear no sound.
> 
> This seems like witchcraft now.

Before you start ritual exorcisms, have you checked you are using the correct 
3.5mm jack and it is inserted properly?  See below:

Jacks have a TS, or TRS, TRRS, or TRRRS contacts arrangement, depending on the 
connectivity they are meant to offer - mono, stereo, stereo+mic and whether 
this is balanced or unbalanced.

Once I plugged in earphones (earbuds) with a 3.5mm jack in a MoBo and ended up 
with my ears getting uncomfortably warm in seconds.  Whatever voltage that 
MoBo was applying to the 3.5mm socket was far too high.  The earphones were 
fried while I was scratching my head trying to understand how could this have 
happened.  I made a mental note never to trust the thin clients provided by my 
employer.

Some times the construction of the spring loaded contacts in a plug is so 
poor, a correctly inserted jack does not provide a good and reliable 
electrical contact.  I'm running a desktop presently where I have to be 
careful how far in I push a 3.5mm stereo jack, to be able to obtain both 
stereo channels audio from the speakers.  Annoying as this is, I have to 
fettle with the jack to find the exact position at which I am able to get 
audio from both channels without distortion.

Despite the above mishaps I generally opt for a cable rather than BT for 
audio.  YMMV.

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]