Re: [gentoo-user] Booted Gentoo the first time on the Arietta.G25...but...

["J. Roeleveld" <joost@antarean.org>]

On Tuesday, November 18, 2014 09:00:37 PM thegeezer wrote:
> On 18/11/14 18:27, meino.cramer@gmx.de wrote:
> > How can I configure Gentoo on the Arietta board
> > to use ethernet-over-usb  to be started while
> > booting the Arietta board?
> > 
> > By "replace everything eth0 with usb0" ??? ;)
> 
> if you still have emdebian image you can boot that and see which modules
> are loaded - that would be a start. a nice dodge is
> # find /sys | grep drivers
> you can also check everything in "make menuconfig"  under the section
> device drivers\network device support\usb network adaptors
> that everything you _might_ need is selected
> there is a chance that the gentoo image has what you need --- what does
> "lsusb" show you ? what about "ifconfig -a"
> usb ethernet devices have very odd names ... names such as enp0s29u1u2
> so it would be "replace everything eth0 with enp0s29u1u2"

Meino,

You might also want to check if there is any firmware that is not being 
found/loaded.
For me, that is usually the case when something isn't working.

--
Joost