James <wireless@tampabay.rr.com> wrote:
>Hello,
>
>I'm having trouble getting a new install to boot. It's a recent Gigabit
>mobo, which supports EFI. I looked at the bios and all looks fine but
>it
>could be a misconfigure in the bios setting? 
>
>
>It's a simple setup for now (/boot / and swap)  When using gparted, I
>selected GPT but made sure the  boot flag was also set for the /boot
>partition. I check the UUIDs using blkid
>
>
>Here's the /etc/fstab (note shown here as 2 lines but single lines
>in the fstab file):
>
>  /dev/sda1  UUID=413ede34-4638-4c54-80a1-8de5343d8cfd  
>  /boot  / ext2   defaults,noatime,nodiratime
>
>  /dev/sda2 UUID=f85e16fb-76e3-4284-ab10-c0680ecc6b15  
>  swap swap defaults 0 0
>
>  /dev/sda3 UUID=4d847c6f-696c-4449-85ea-d985f1b3affb 
>  / ext4 defaults,noatime,nodiratime
>
>Any ideas where I went astray? Trying not to use the MBR
>on this GPT EFI system with a single 2T drive.
>
>
>Maybe somebody could post a simple GPT EFI UUID example fstab

Use either UUID or device in fstab, not both.
-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.