public inbox for gentoo-user@lists.gentoo.org
 help / color / mirror / Atom feed
* [gentoo-user] AMD64 - which stage3 file for new install?
@ 2005-08-30 18:09 Mark Knecht
  2005-08-30 18:18 ` John Jolet
  0 siblings, 1 reply; 7+ messages in thread
From: Mark Knecht @ 2005-08-30 18:09 UTC (permalink / raw
  To: gentoo-user

Unless I missed it this page doesn't seem to indicate which one to use
for an AMD64 processor.

http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=1&chap=5

So, is it:

stage3-i686-2005.0.tar.bz
stage3-x86-2005.0.tar.bz

or is there an actual AMD64 stage file somewhere on the net I should be using?

Thanks,
Mark

-- 
gentoo-user@gentoo.org mailing list



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [gentoo-user] AMD64 - which stage3 file for new install?
  2005-08-30 18:09 [gentoo-user] AMD64 - which stage3 file for new install? Mark Knecht
@ 2005-08-30 18:18 ` John Jolet
  2005-08-30 19:57   ` Mark Knecht
  0 siblings, 1 reply; 7+ messages in thread
From: John Jolet @ 2005-08-30 18:18 UTC (permalink / raw
  To: gentoo-user

there is an actual one on the 64-bit universal install cd....  which install 
cd did you download?

On Tuesday 30 August 2005 13:09, Mark Knecht wrote:
> Unless I missed it this page doesn't seem to indicate which one to use
> for an AMD64 processor.
>
> http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=1&chap=5
>
> So, is it:
>
> stage3-i686-2005.0.tar.bz
> stage3-x86-2005.0.tar.bz
>
> or is there an actual AMD64 stage file somewhere on the net I should be
> using?
>
> Thanks,
> Mark

-- 
John Jolet
Your On-Demand IT Department
512-762-0729
www.jolet.net
john@jolet.net
-- 
gentoo-user@gentoo.org mailing list



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [gentoo-user] AMD64 - which stage3 file for new install?
  2005-08-30 18:18 ` John Jolet
@ 2005-08-30 19:57   ` Mark Knecht
  2005-08-30 20:05     ` John Jolet
  0 siblings, 1 reply; 7+ messages in thread
From: Mark Knecht @ 2005-08-30 19:57 UTC (permalink / raw
  To: gentoo-user

John,
   As per a thread over the last couple of days I was planningon using
the 2005.0 CD that I've used for a number of other machines, but that
CD doesn't have any 64-bit stuff on it. If there's a 64-bit install CD
then I'll go look for that.

   Thanks for the info!

With best regards,
Mark

On 8/30/05, John Jolet <john@jolet.net> wrote:
> there is an actual one on the 64-bit universal install cd....  which install
> cd did you download?
> 
> On Tuesday 30 August 2005 13:09, Mark Knecht wrote:
> > Unless I missed it this page doesn't seem to indicate which one to use
> > for an AMD64 processor.
> >
> > http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=1&chap=5
> >
> > So, is it:
> >
> > stage3-i686-2005.0.tar.bz
> > stage3-x86-2005.0.tar.bz
> >
> > or is there an actual AMD64 stage file somewhere on the net I should be
> > using?
> >
> > Thanks,
> > Mark
> 
> --
> John Jolet
> Your On-Demand IT Department
> 512-762-0729
> www.jolet.net
> john@jolet.net
> --
> gentoo-user@gentoo.org mailing list
> 
>

-- 
gentoo-user@gentoo.org mailing list



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [gentoo-user] AMD64 - which stage3 file for new install?
  2005-08-30 19:57   ` Mark Knecht
@ 2005-08-30 20:05     ` John Jolet
  2005-08-30 20:15       ` Mark Knecht
  0 siblings, 1 reply; 7+ messages in thread
From: John Jolet @ 2005-08-30 20:05 UTC (permalink / raw
  To: gentoo-user

Yeah, there's a 2005.1 amd_64 universal install.  I know, because I  
just used it to set up 4 servers :)
On Aug 30, 2005, at 2:57 PM, Mark Knecht wrote:

> John,
>    As per a thread over the last couple of days I was planningon using
> the 2005.0 CD that I've used for a number of other machines, but that
> CD doesn't have any 64-bit stuff on it. If there's a 64-bit install CD
> then I'll go look for that.
>
>    Thanks for the info!
>
> With best regards,
> Mark
>
> On 8/30/05, John Jolet <john@jolet.net> wrote:
>
>> there is an actual one on the 64-bit universal install cd....   
>> which install
>> cd did you download?
>>
>> On Tuesday 30 August 2005 13:09, Mark Knecht wrote:
>>
>>> Unless I missed it this page doesn't seem to indicate which one  
>>> to use
>>> for an AMD64 processor.
>>>
>>> http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=1&chap=5
>>>
>>> So, is it:
>>>
>>> stage3-i686-2005.0.tar.bz
>>> stage3-x86-2005.0.tar.bz
>>>
>>> or is there an actual AMD64 stage file somewhere on the net I  
>>> should be
>>> using?
>>>
>>> Thanks,
>>> Mark
>>>
>>
>> --
>> John Jolet
>> Your On-Demand IT Department
>> 512-762-0729
>> www.jolet.net
>> john@jolet.net
>> --
>> gentoo-user@gentoo.org mailing list
>>
>>
>>
>
> -- 
> gentoo-user@gentoo.org mailing list
>
>

-- 
gentoo-user@gentoo.org mailing list



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [gentoo-user] AMD64 - which stage3 file for new install?
  2005-08-30 20:05     ` John Jolet
@ 2005-08-30 20:15       ` Mark Knecht
  2005-08-30 20:20         ` John Jolet
  0 siblings, 1 reply; 7+ messages in thread
From: Mark Knecht @ 2005-08-30 20:15 UTC (permalink / raw
  To: gentoo-user

Thanks. I'm buring a copy of the minimal install for AMD64 now.

Cheers,
Mark

On 8/30/05, John Jolet <john@jolet.net> wrote:
> Yeah, there's a 2005.1 amd_64 universal install.  I know, because I
> just used it to set up 4 servers :)
> On Aug 30, 2005, at 2:57 PM, Mark Knecht wrote:
> 
> > John,
> >    As per a thread over the last couple of days I was planningon using
> > the 2005.0 CD that I've used for a number of other machines, but that
> > CD doesn't have any 64-bit stuff on it. If there's a 64-bit install CD
> > then I'll go look for that.
> >
> >    Thanks for the info!
> >
> > With best regards,
> > Mark
> >
> > On 8/30/05, John Jolet <john@jolet.net> wrote:
> >
> >> there is an actual one on the 64-bit universal install cd....
> >> which install
> >> cd did you download?
> >>
> >> On Tuesday 30 August 2005 13:09, Mark Knecht wrote:
> >>
> >>> Unless I missed it this page doesn't seem to indicate which one
> >>> to use
> >>> for an AMD64 processor.
> >>>
> >>> http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=1&chap=5
> >>>
> >>> So, is it:
> >>>
> >>> stage3-i686-2005.0.tar.bz
> >>> stage3-x86-2005.0.tar.bz
> >>>
> >>> or is there an actual AMD64 stage file somewhere on the net I
> >>> should be
> >>> using?
> >>>
> >>> Thanks,
> >>> Mark
> >>>
> >>
> >> --
> >> John Jolet
> >> Your On-Demand IT Department
> >> 512-762-0729
> >> www.jolet.net
> >> john@jolet.net
> >> --
> >> gentoo-user@gentoo.org mailing list
> >>
> >>
> >>
> >
> > --
> > gentoo-user@gentoo.org mailing list
> >
> >
> 
> --
> gentoo-user@gentoo.org mailing list
> 
>

-- 
gentoo-user@gentoo.org mailing list



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [gentoo-user] AMD64 - which stage3 file for new install?
  2005-08-30 20:15       ` Mark Knecht
@ 2005-08-30 20:20         ` John Jolet
  2005-08-30 21:54           ` Mark Knecht
  0 siblings, 1 reply; 7+ messages in thread
From: John Jolet @ 2005-08-30 20:20 UTC (permalink / raw
  To: gentoo-user

well, not sure what stage files, if any that one has on it.  I used  
the universal installer.

On Aug 30, 2005, at 3:15 PM, Mark Knecht wrote:

> Thanks. I'm buring a copy of the minimal install for AMD64 now.
>
> Cheers,
> Mark
>
> On 8/30/05, John Jolet <john@jolet.net> wrote:
>
>> Yeah, there's a 2005.1 amd_64 universal install.  I know, because I
>> just used it to set up 4 servers :)
>> On Aug 30, 2005, at 2:57 PM, Mark Knecht wrote:
>>
>>
>>> John,
>>>    As per a thread over the last couple of days I was planningon  
>>> using
>>> the 2005.0 CD that I've used for a number of other machines, but  
>>> that
>>> CD doesn't have any 64-bit stuff on it. If there's a 64-bit  
>>> install CD
>>> then I'll go look for that.
>>>
>>>    Thanks for the info!
>>>
>>> With best regards,
>>> Mark
>>>
>>> On 8/30/05, John Jolet <john@jolet.net> wrote:
>>>
>>>
>>>> there is an actual one on the 64-bit universal install cd....
>>>> which install
>>>> cd did you download?
>>>>
>>>> On Tuesday 30 August 2005 13:09, Mark Knecht wrote:
>>>>
>>>>
>>>>> Unless I missed it this page doesn't seem to indicate which one
>>>>> to use
>>>>> for an AMD64 processor.
>>>>>
>>>>> http://www.gentoo.org/doc/en/handbook/handbook-x86.xml? 
>>>>> part=1&chap=5
>>>>>
>>>>> So, is it:
>>>>>
>>>>> stage3-i686-2005.0.tar.bz
>>>>> stage3-x86-2005.0.tar.bz
>>>>>
>>>>> or is there an actual AMD64 stage file somewhere on the net I
>>>>> should be
>>>>> using?
>>>>>
>>>>> Thanks,
>>>>> Mark
>>>>>
>>>>>
>>>>
>>>> --
>>>> John Jolet
>>>> Your On-Demand IT Department
>>>> 512-762-0729
>>>> www.jolet.net
>>>> john@jolet.net
>>>> --
>>>> gentoo-user@gentoo.org mailing list
>>>>
>>>>
>>>>
>>>>
>>>
>>> --
>>> gentoo-user@gentoo.org mailing list
>>>
>>>
>>>
>>
>> --
>> gentoo-user@gentoo.org mailing list
>>
>>
>>
>
> -- 
> gentoo-user@gentoo.org mailing list
>
>

-- 
gentoo-user@gentoo.org mailing list



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [gentoo-user] AMD64 - which stage3 file for new install?
  2005-08-30 20:20         ` John Jolet
@ 2005-08-30 21:54           ` Mark Knecht
  0 siblings, 0 replies; 7+ messages in thread
From: Mark Knecht @ 2005-08-30 21:54 UTC (permalink / raw
  To: gentoo-user

Yeah, I decided to go for the Universal install since it has stage
files. Seemed that the Minimal didn't. I'd forgotten that.

The AMD64 will be nicer to install from. I'm getting 65MB/S DMA on the
hard drive whereas the x86 Universal didn't have the right chipset
stuff and I was only getting 2.5MB/S.

Two problems I've seen with the AMD64 Universal CD so far:

1) Console #2 doesn't go to a console. It stays with the boot up
graphics. I have to use Alt-Ctl-F3 to get to a second terminal.

2) The path in the login message telling you how to start links to get
the install docs is incorrect.

Both pretty minor.

Install underway if I can get comfortable with LVM2....

Thanks,
Mark

On 8/30/05, John Jolet <john@jolet.net> wrote:
> well, not sure what stage files, if any that one has on it.  I used
> the universal installer.
> 
> On Aug 30, 2005, at 3:15 PM, Mark Knecht wrote:
> 
> > Thanks. I'm buring a copy of the minimal install for AMD64 now.
> >
> > Cheers,
> > Mark
> >
> > On 8/30/05, John Jolet <john@jolet.net> wrote:
> >
> >> Yeah, there's a 2005.1 amd_64 universal install.  I know, because I
> >> just used it to set up 4 servers :)
> >> On Aug 30, 2005, at 2:57 PM, Mark Knecht wrote:
> >>
> >>
> >>> John,
> >>>    As per a thread over the last couple of days I was planningon
> >>> using
> >>> the 2005.0 CD that I've used for a number of other machines, but
> >>> that
> >>> CD doesn't have any 64-bit stuff on it. If there's a 64-bit
> >>> install CD
> >>> then I'll go look for that.
> >>>
> >>>    Thanks for the info!
> >>>
> >>> With best regards,
> >>> Mark
> >>>
> >>> On 8/30/05, John Jolet <john@jolet.net> wrote:
> >>>
> >>>
> >>>> there is an actual one on the 64-bit universal install cd....
> >>>> which install
> >>>> cd did you download?
> >>>>
> >>>> On Tuesday 30 August 2005 13:09, Mark Knecht wrote:
> >>>>
> >>>>
> >>>>> Unless I missed it this page doesn't seem to indicate which one
> >>>>> to use
> >>>>> for an AMD64 processor.
> >>>>>
> >>>>> http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?
> >>>>> part=1&chap=5
> >>>>>
> >>>>> So, is it:
> >>>>>
> >>>>> stage3-i686-2005.0.tar.bz
> >>>>> stage3-x86-2005.0.tar.bz
> >>>>>
> >>>>> or is there an actual AMD64 stage file somewhere on the net I
> >>>>> should be
> >>>>> using?
> >>>>>
> >>>>> Thanks,
> >>>>> Mark
> >>>>>
> >>>>>
> >>>>
> >>>> --
> >>>> John Jolet
> >>>> Your On-Demand IT Department
> >>>> 512-762-0729
> >>>> www.jolet.net
> >>>> john@jolet.net
> >>>> --
> >>>> gentoo-user@gentoo.org mailing list
> >>>>
> >>>>
> >>>>
> >>>>
> >>>
> >>> --
> >>> gentoo-user@gentoo.org mailing list
> >>>
> >>>
> >>>
> >>
> >> --
> >> gentoo-user@gentoo.org mailing list
> >>
> >>
> >>
> >
> > --
> > gentoo-user@gentoo.org mailing list
> >
> >
> 
> --
> gentoo-user@gentoo.org mailing list
> 
>

-- 
gentoo-user@gentoo.org mailing list



^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2005-08-30 22:03 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-08-30 18:09 [gentoo-user] AMD64 - which stage3 file for new install? Mark Knecht
2005-08-30 18:18 ` John Jolet
2005-08-30 19:57   ` Mark Knecht
2005-08-30 20:05     ` John Jolet
2005-08-30 20:15       ` Mark Knecht
2005-08-30 20:20         ` John Jolet
2005-08-30 21:54           ` Mark Knecht

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox