Re: [gentoo-user] Re: Switching to clocksource tsc: takes AGES on boot

[LK <linuxrocksrulers@googlemail.com>]

[-- Attachment #1: Type: text/plain, Size: 872 bytes --]


On 120215, at 1:07, mike@trausch.us wrote:
> This sounds suspiciously like an error loading firmware, which can
> happen when you have a video adapter or WiFi adapter that needs
> firmware, but doesn't have have the right one.
I have indeed problems with firmware.
I have a PC and use ethernet which works.
I have an AMD Radeon 6xxx card. I tried both with linux-firmware
AND radeon-ucode, but both fail to load. They do
exist in /lib/firmware/radeon: CAYMAN_mc.bin CAYMAN_me.bin
CAYMAN_pfp.bin CAYMAN_rlc.bin
I guess dmesg explains things better than i do.

Shall I clean and compile my kernel i remove or change sth. ?


> Are there any firmware-related messages in your dmesg?
Oh yes: http://pastebin.com/b95y3GaH
Look at the area from 1.576863 to 62.228490, includes the 60s
freeze from switching to clocksource tsc.

Does the problem lay in my AMD gpu (hd6xxx) ?




[-- Attachment #2: dmesg_clocksource.txt --]
[-- Type: text/plain, Size: 75607 bytes --]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.1-gentoo-r2 (root@gee) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #3 SMP Tue Feb 14 10:44:16 Local time zone must be set--see zic 
[    0.000000] Command line: root=/dev/sda5
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[    0.000000]  BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000befa3000 (usable)
[    0.000000]  BIOS-e820: 00000000befa3000 - 00000000beffa000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000beffa000 - 00000000bf59d000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf59d000 - 00000000bf5ae000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bf5ae000 - 00000000bf5c5000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf5c5000 - 00000000bf5c7000 (usable)
[    0.000000]  BIOS-e820: 00000000bf5c7000 - 00000000bf5cf000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf5cf000 - 00000000bf5da000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bf5da000 - 00000000bf636000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf636000 - 00000000bf679000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bf679000 - 00000000bf800000 (usable)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000023f800000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: System manufacturer System Product Name/P8P67, BIOS 1704 06/08/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x23f800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   3 base 23F800000 mask FFF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000fcf00] fcf00
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
[    0.000000]  0000000000 - 00bf800000 page 2M
[    0.000000] kernel direct mapping tables up to bf800000 @ 1fffc000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000023f800000
[    0.000000]  0100000000 - 023f800000 page 2M
[    0.000000] kernel direct mapping tables up to 23f800000 @ bf7f6000-bf800000
[    0.000000] ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 00000000beff1068 0004C (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000beff9198 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 00000000beff1140 08054 (v02 ALASKA    A M I 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 00000000bf5d1f80 00040
[    0.000000] ACPI: APIC 00000000beff9290 00092 (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 00000000beff9328 001D6 (v01 AMICPU     PROC 00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG 00000000beff9500 0003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000beff9540 00038 (v01 ALASKA    A M I 01072009 AMI. 00000004)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000023f800000
[    0.000000] Initmem setup node 0 0000000000000000-000000023f800000
[    0.000000]   NODE_DATA [000000023f7fb000 - 000000023f7fffff]
[    0.000000]  [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023edfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0023f800
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x000befa3
[    0.000000]     0: 0x000bf5c5 -> 0x000bf5c7
[    0.000000]     0: 0x000bf679 -> 0x000bf800
[    0.000000]     0: 0x00100000 -> 0x0023f800
[    0.000000] On node 0 totalpages: 2091193
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3912 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 762220 pages, LIFO batch:31
[    0.000000]   Normal zone: 20448 pages used for memmap
[    0.000000]   Normal zone: 1288224 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000befa3000 - 00000000beffa000
[    0.000000] PM: Registered nosave memory: 00000000beffa000 - 00000000bf59d000
[    0.000000] PM: Registered nosave memory: 00000000bf59d000 - 00000000bf5ae000
[    0.000000] PM: Registered nosave memory: 00000000bf5ae000 - 00000000bf5c5000
[    0.000000] PM: Registered nosave memory: 00000000bf5c7000 - 00000000bf5cf000
[    0.000000] PM: Registered nosave memory: 00000000bf5cf000 - 00000000bf5da000
[    0.000000] PM: Registered nosave memory: 00000000bf5da000 - 00000000bf636000
[    0.000000] PM: Registered nosave memory: 00000000bf636000 - 00000000bf679000
[    0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at bf800000 (gap: bf800000:3f51c000)
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88023f400000 s76672 r8192 d21632 u262144
[    0.000000] pcpu-alloc: s76672 r8192 d21632 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2054356
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/sda5
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8151944k/9428992k available (8056k kernel code, 1064220k absent, 212828k reserved, 4933k data, 636k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:744 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.001000] Detected 3410.794 MHz processor.
[    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6821.58 BogoMIPS (lpj=3410794)
[    0.000186] pid_max: default: 32768 minimum: 301
[    0.000297] Security Framework initialized
[    0.000389] SELinux:  Initializing.
[    0.000484] SELinux:  Starting in permissive mode
[    0.000916] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.002248] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.002815] Mount-cache hash table entries: 256
[    0.002975] Initializing cgroup subsys cpuacct
[    0.003066] Initializing cgroup subsys freezer
[    0.003175] CPU: Physical Processor ID: 0
[    0.003275] CPU: Processor Core ID: 0
[    0.003369] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.003369] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.003551] mce: CPU supports 9 MCE banks
[    0.003649] CPU0: Thermal monitoring enabled (TM1)
[    0.003744] using mwait in idle threads.
[    0.003890] ACPI: Core revision 20110623
[    0.114032] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.124123] CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07
[    0.226056] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[    0.226345] PEBS disabled due to CPU errata.
[    0.226442] ... version:                3
[    0.226537] ... bit width:              48
[    0.226631] ... generic registers:      4
[    0.226723] ... value mask:             0000ffffffffffff
[    0.226816] ... max period:             000000007fffffff
[    0.226910] ... fixed-purpose events:   3
[    0.227004] ... event mask:             000000070000000f
[    0.227185] Booting Node   0, Processors  #1
[    0.227295] smpboot cpu 1: start_ip = 98000
[    0.318150]  #2
[    0.318205] smpboot cpu 2: start_ip = 98000
[    0.409056]  #3
[    0.409112] smpboot cpu 3: start_ip = 98000
[    0.499965]  #4
[    0.500019] smpboot cpu 4: start_ip = 98000
[    0.590923]  #5
[    0.590978] smpboot cpu 5: start_ip = 98000
[    0.681890]  #6
[    0.681943] smpboot cpu 6: start_ip = 98000
[    0.772798]  #7 Ok.
[    0.772894] smpboot cpu 7: start_ip = 98000
[    0.863719] Brought up 8 CPUs
[    0.863815] Total of 8 processors activated (54574.17 BogoMIPS).
[    0.869368] PM: Registering ACPI NVS region at befa3000 (356352 bytes)
[    0.869465] PM: Registering ACPI NVS region at bf59d000 (69632 bytes)
[    0.869559] PM: Registering ACPI NVS region at bf5cf000 (45056 bytes)
[    0.869653] PM: Registering ACPI NVS region at bf636000 (274432 bytes)
[    0.869811] RTC time: 10:10:30, date: 02/15/12
[    0.869921] NET: Registered protocol family 16
[    0.870072] kworker/u:0 used greatest stack depth: 5512 bytes left
[    0.870275] ACPI: bus type pci registered
[    0.870414] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.870547] PCI: not using MMCONFIG
[    0.870641] PCI: Using configuration type 1 for base access
[    0.874673] bio: create slab <bio-0> at 0
[    0.874830] ACPI: Added _OSI(Module Device)
[    0.874923] ACPI: Added _OSI(Processor Device)
[    0.875015] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.875109] ACPI: Added _OSI(Processor Aggregator Device)
[    0.875838] ACPI: EC: Look up EC in DSDT
[    0.876432] ACPI: Executed 1 blocks of module-level executable AML code
[    0.877923] ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[    0.878217] ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110623/nsinit-349)
[    0.878631] ACPI: SSDT 00000000bf5d0818 0079C (v01    AMI      IST 00000001 MSFT 03000001)
[    0.879106] ACPI: Dynamic OEM Table Load:
[    0.879304] ACPI: SSDT           (null) 0079C (v01    AMI      IST 00000001 MSFT 03000001)
[    0.879561] ACPI: SSDT 00000000bf5cfd98 000EC (v01    AMI      CST 00000001 MSFT 03000001)
[    0.879971] ACPI: Dynamic OEM Table Load:
[    0.880168] ACPI: SSDT           (null) 000EC (v01    AMI      CST 00000001 MSFT 03000001)
[    0.882116] ACPI: Interpreter enabled
[    0.882209] ACPI: (supports S0 S1 S3 S4 S5)
[    0.882570] ACPI: Using IOAPIC for interrupt routing
[    0.882678] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.882847] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[    0.891897] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.895244] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    0.895434] ACPI: No dock devices found.
[    0.895527] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.895774] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.895996] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.896091] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.896187] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.896320] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff]
[    0.896455] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
[    0.896591] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000cffff])
[    0.896732] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
[    0.896756] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[    0.896773] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.896775] pci 0000:00:01.0: PME# disabled
[    0.896812] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[    0.896833] pci 0000:00:16.0: reg 10: [mem 0xfe708000-0xfe70800f 64bit]
[    0.896890] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.896893] pci 0000:00:16.0: PME# disabled
[    0.896922] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[    0.896941] pci 0000:00:1a.0: reg 10: [mem 0xfe707000-0xfe7073ff]
[    0.897008] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.897012] pci 0000:00:1a.0: PME# disabled
[    0.897033] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[    0.897047] pci 0000:00:1b.0: reg 10: [mem 0xfe700000-0xfe703fff 64bit]
[    0.897095] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.897098] pci 0000:00:1b.0: PME# disabled
[    0.897117] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[    0.897174] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.897177] pci 0000:00:1c.0: PME# disabled
[    0.897198] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[    0.897255] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.897259] pci 0000:00:1c.1: PME# disabled
[    0.897279] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
[    0.897336] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.897339] pci 0000:00:1c.2: PME# disabled
[    0.897360] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[    0.897417] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.897420] pci 0000:00:1c.3: PME# disabled
[    0.897442] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
[    0.897499] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.897502] pci 0000:00:1c.4: PME# disabled
[    0.897523] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[    0.897582] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.897585] pci 0000:00:1c.5: PME# disabled
[    0.897605] pci 0000:00:1c.6: [8086:244e] type 1 class 0x000604
[    0.897663] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.897666] pci 0000:00:1c.6: PME# disabled
[    0.897687] pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604
[    0.897744] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.897747] pci 0000:00:1c.7: PME# disabled
[    0.897772] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[    0.897791] pci 0000:00:1d.0: reg 10: [mem 0xfe706000-0xfe7063ff]
[    0.897859] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.897862] pci 0000:00:1d.0: PME# disabled
[    0.897883] pci 0000:00:1f.0: [8086:1c46] type 0 class 0x000601
[    0.897989] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106
[    0.898005] pci 0000:00:1f.2: reg 10: [io  0xf070-0xf077]
[    0.898012] pci 0000:00:1f.2: reg 14: [io  0xf060-0xf063]
[    0.898019] pci 0000:00:1f.2: reg 18: [io  0xf050-0xf057]
[    0.898026] pci 0000:00:1f.2: reg 1c: [io  0xf040-0xf043]
[    0.898033] pci 0000:00:1f.2: reg 20: [io  0xf020-0xf03f]
[    0.898040] pci 0000:00:1f.2: reg 24: [mem 0xfe705000-0xfe7057ff]
[    0.898069] pci 0000:00:1f.2: PME# supported from D3hot
[    0.898072] pci 0000:00:1f.2: PME# disabled
[    0.898086] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[    0.898099] pci 0000:00:1f.3: reg 10: [mem 0xfe704000-0xfe7040ff 64bit]
[    0.898118] pci 0000:00:1f.3: reg 20: [io  0xf000-0xf01f]
[    0.898162] pci 0000:01:00.0: [1002:6718] type 0 class 0x000300
[    0.898173] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.898181] pci 0000:01:00.0: reg 18: [mem 0xfe620000-0xfe63ffff 64bit]
[    0.898187] pci 0000:01:00.0: reg 20: [io  0xe000-0xe0ff]
[    0.898198] pci 0000:01:00.0: reg 30: [mem 0xfe600000-0xfe61ffff pref]
[    0.898212] pci 0000:01:00.0: supports D1 D2
[    0.898228] pci 0000:01:00.1: [1002:aa80] type 0 class 0x000403
[    0.898238] pci 0000:01:00.1: reg 10: [mem 0xfe640000-0xfe643fff 64bit]
[    0.898275] pci 0000:01:00.1: supports D1 D2
[    0.899579] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.899675] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.899677] pci 0000:00:01.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.899680] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.899720] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.899884] pci 0000:03:00.0: [1033:0194] type 0 class 0x000c03
[    0.899909] pci 0000:03:00.0: reg 10: [mem 0xfe500000-0xfe501fff 64bit]
[    0.900011] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.900016] pci 0000:03:00.0: PME# disabled
[    0.901584] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.901680] pci 0000:00:1c.1:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.901725] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    0.901863] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[    0.902025] pci 0000:06:00.0: [1033:0194] type 0 class 0x000c03
[    0.902050] pci 0000:06:00.0: reg 10: [mem 0xfe400000-0xfe401fff 64bit]
[    0.902152] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[    0.902156] pci 0000:06:00.0: PME# disabled
[    0.903582] pci 0000:00:1c.4: PCI bridge to [bus 06-06]
[    0.903677] pci 0000:00:1c.4:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.903743] pci 0000:07:00.0: [10ec:8168] type 0 class 0x000200
[    0.903762] pci 0000:07:00.0: reg 10: [io  0xd000-0xd0ff]
[    0.903794] pci 0000:07:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[    0.903815] pci 0000:07:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[    0.903873] pci 0000:07:00.0: supports D1 D2
[    0.903874] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.903879] pci 0000:07:00.0: PME# disabled
[    0.905581] pci 0000:00:1c.5: PCI bridge to [bus 07-07]
[    0.905678] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.905685] pci 0000:00:1c.5:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.905740] pci 0000:08:00.0: [1b21:1080] type 1 class 0x000604
[    0.905842] pci 0000:00:1c.6: PCI bridge to [bus 08-09] (subtractive decode)
[    0.905938] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
[    0.905942] pci 0000:00:1c.6:   bridge window [mem 0xfe300000-0xfe3fffff]
[    0.905948] pci 0000:00:1c.6:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.905949] pci 0000:00:1c.6:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.905950] pci 0000:00:1c.6:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.905952] pci 0000:00:1c.6:   bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[    0.906015] pci 0000:09:03.0: [1106:3044] type 0 class 0x000c00
[    0.906045] pci 0000:09:03.0: reg 10: [mem 0xfe300000-0xfe3007ff]
[    0.906062] pci 0000:09:03.0: reg 14: [io  0xc000-0xc07f]
[    0.906173] pci 0000:09:03.0: supports D2
[    0.906174] pci 0000:09:03.0: PME# supported from D2 D3hot D3cold
[    0.906180] pci 0000:09:03.0: PME# disabled
[    0.906252] pci 0000:08:00.0: PCI bridge to [bus 09-09] (subtractive decode)
[    0.906353] pci 0000:08:00.0:   bridge window [io  0xc000-0xcfff]
[    0.906358] pci 0000:08:00.0:   bridge window [mem 0xfe300000-0xfe3fffff]
[    0.906368] pci 0000:08:00.0:   bridge window [io  0xc000-0xcfff] (subtractive decode)
[    0.906369] pci 0000:08:00.0:   bridge window [mem 0xfe300000-0xfe3fffff] (subtractive decode)
[    0.906370] pci 0000:08:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.906372] pci 0000:08:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.906373] pci 0000:08:00.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.906374] pci 0000:08:00.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.906376] pci 0000:08:00.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.906377] pci 0000:08:00.0:   bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[    0.906446] pci 0000:0a:00.0: [1b4b:9172] type 0 class 0x000106
[    0.906462] pci 0000:0a:00.0: reg 10: [io  0xb040-0xb047]
[    0.906474] pci 0000:0a:00.0: reg 14: [io  0xb030-0xb033]
[    0.906487] pci 0000:0a:00.0: reg 18: [io  0xb020-0xb027]
[    0.906499] pci 0000:0a:00.0: reg 1c: [io  0xb010-0xb013]
[    0.906511] pci 0000:0a:00.0: reg 20: [io  0xb000-0xb00f]
[    0.906523] pci 0000:0a:00.0: reg 24: [mem 0xfe210000-0xfe2101ff]
[    0.906535] pci 0000:0a:00.0: reg 30: [mem 0xfe200000-0xfe20ffff pref]
[    0.906571] pci 0000:0a:00.0: PME# supported from D3hot
[    0.906575] pci 0000:0a:00.0: PME# disabled
[    0.908576] pci 0000:00:1c.7: PCI bridge to [bus 0a-0a]
[    0.908671] pci 0000:00:1c.7:   bridge window [io  0xb000-0xbfff]
[    0.908674] pci 0000:00:1c.7:   bridge window [mem 0xfe200000-0xfe2fffff]
[    0.908717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.908767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.908782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.908796] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[    0.908809] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[    0.908823] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[    0.908836] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    0.908849] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[    0.908863] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
[    0.908877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.BR24._PRT]
[    0.908907] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
[    0.908968]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.909178]  pci0000:00: ACPI _OSC control (0x1c) granted
[    0.911995] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.912750] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.913495] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.914186] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.914874] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.915614] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.916357] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.917104] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.917886] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.918021] vgaarb: loaded
[    0.918112] vgaarb: bridge control possible 0000:01:00.0
[    0.918270] SCSI subsystem initialized
[    0.918407] libata version 3.00 loaded.
[    0.918491] usbcore: registered new interface driver usbfs
[    0.918604] usbcore: registered new interface driver hub
[    0.918718] usbcore: registered new device driver usb
[    0.918918] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.919010] PCI: Using ACPI for IRQ routing
[    0.920370] PCI: pci_cache_line_size set to 64 bytes
[    0.920451] reserve RAM buffer: 000000000009d400 - 000000000009ffff 
[    0.920452] reserve RAM buffer: 00000000befa3000 - 00000000bfffffff 
[    0.920454] reserve RAM buffer: 00000000bf5c7000 - 00000000bfffffff 
[    0.920456] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff 
[    0.920457] reserve RAM buffer: 000000023f800000 - 000000023fffffff 
[    0.920590] cfg80211: Calling CRDA to update world regulatory domain
[    0.920765] NetLabel: Initializing
[    0.920856] NetLabel:  domain hash size = 128
[    0.920948] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.921046] NetLabel:  unlabeled traffic allowed by default
[    0.921175] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.921734] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.924838] Switching to clocksource hpet
[    0.929137] pnp: PnP ACPI init
[    0.929235] ACPI: bus type pnp registered
[    0.929399] pnp 00:00: [bus 00-ff]
[    0.929401] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.929402] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.929403] pnp 00:00: [io  0x0d00-0xffff window]
[    0.929405] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.929406] pnp 00:00: [mem 0x000c8000-0x000dffff window]
[    0.929407] pnp 00:00: [mem 0xc0000000-0xffffffff window]
[    0.929408] pnp 00:00: [mem 0x00000000 window]
[    0.929453] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.929484] pnp 00:01: [mem 0xfed10000-0xfed19fff]
[    0.929485] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
[    0.929486] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[    0.929487] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[    0.929488] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[    0.929529] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
[    0.929625] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
[    0.929720] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.929814] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.929907] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.930003] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.930049] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    0.930051] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    0.930052] pnp 00:02: [io  0x0290-0x029f]
[    0.930053] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    0.930093] system 00:02: [io  0x0290-0x029f] has been reserved
[    0.930189] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.930198] pnp 00:03: [dma 4]
[    0.930199] pnp 00:03: [io  0x0000-0x000f]
[    0.930200] pnp 00:03: [io  0x0081-0x0083]
[    0.930202] pnp 00:03: [io  0x0087]
[    0.930203] pnp 00:03: [io  0x0089-0x008b]
[    0.930204] pnp 00:03: [io  0x008f]
[    0.930205] pnp 00:03: [io  0x00c0-0x00df]
[    0.930236] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.930241] pnp 00:04: [io  0x0070-0x0071]
[    0.930247] pnp 00:04: [irq 8]
[    0.930277] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.930281] pnp 00:05: [io  0x0061]
[    0.930310] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.930319] pnp 00:06: [io  0x0010-0x001f]
[    0.930320] pnp 00:06: [io  0x0022-0x003f]
[    0.930321] pnp 00:06: [io  0x0044-0x005f]
[    0.930322] pnp 00:06: [io  0x0063]
[    0.930323] pnp 00:06: [io  0x0065]
[    0.930324] pnp 00:06: [io  0x0067-0x006f]
[    0.930325] pnp 00:06: [io  0x0072-0x007f]
[    0.930325] pnp 00:06: [io  0x0080]
[    0.930326] pnp 00:06: [io  0x0084-0x0086]
[    0.930327] pnp 00:06: [io  0x0088]
[    0.930328] pnp 00:06: [io  0x008c-0x008e]
[    0.930329] pnp 00:06: [io  0x0090-0x009f]
[    0.930330] pnp 00:06: [io  0x00a2-0x00bf]
[    0.930331] pnp 00:06: [io  0x00e0-0x00ef]
[    0.930332] pnp 00:06: [io  0x04d0-0x04d1]
[    0.930375] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.930472] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.930477] pnp 00:07: [io  0x00f0-0x00ff]
[    0.930481] pnp 00:07: [irq 13]
[    0.930510] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.930522] pnp 00:08: [io  0x0060]
[    0.930523] pnp 00:08: [io  0x0064]
[    0.930527] pnp 00:08: [irq 1]
[    0.930561] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.930704] pnp 00:09: [io  0x03f8-0x03ff]
[    0.930708] pnp 00:09: [irq 4]
[    0.930709] pnp 00:09: [dma 0 disabled]
[    0.930760] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.930845] pnp 00:0a: [io  0x0400-0x0453]
[    0.930846] pnp 00:0a: [io  0x0458-0x047f]
[    0.930847] pnp 00:0a: [io  0x0000-0xffffffffffffffff disabled]
[    0.930848] pnp 00:0a: [io  0x0500-0x057f]
[    0.930849] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[    0.930850] pnp 00:0a: [mem 0xfec00000-0xfecfffff]
[    0.930851] pnp 00:0a: [mem 0xfed08000-0xfed08fff]
[    0.930852] pnp 00:0a: [mem 0xff000000-0xffffffff]
[    0.930896] system 00:0a: [io  0x0400-0x0453] has been reserved
[    0.930991] system 00:0a: [io  0x0458-0x047f] has been reserved
[    0.931093] system 00:0a: [io  0x0500-0x057f] has been reserved
[    0.931187] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.931282] system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.931380] system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.931476] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[    0.931572] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.931592] pnp 00:0b: [io  0x0454-0x0457]
[    0.931632] system 00:0b: [io  0x0454-0x0457] has been reserved
[    0.931726] system 00:0b: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.931785] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
[    0.931823] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.931909] pnp: PnP ACPI: found 13 devices
[    0.932001] ACPI: ACPI bus type pnp unregistered
[    0.936698] PCI: max bus depth: 2 pci_try_num: 3
[    0.936766] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.936860] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.936955] pci 0000:00:01.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.937061] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.937192] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.937292] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.937387] pci 0000:00:1c.1:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.937487] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    0.937589] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[    0.937690] pci 0000:00:1c.4: PCI bridge to [bus 06-06]
[    0.937783] pci 0000:00:1c.4:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.937881] pci 0000:00:1c.5: PCI bridge to [bus 07-07]
[    0.937976] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.938091] pci 0000:00:1c.5:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.938227] pci 0000:08:00.0: PCI bridge to [bus 09-09]
[    0.938318] pci 0000:08:00.0:   bridge window [io  0xc000-0xcfff]
[    0.938418] pci 0000:08:00.0:   bridge window [mem 0xfe300000-0xfe3fffff]
[    0.938523] pci 0000:00:1c.6: PCI bridge to [bus 08-09]
[    0.938615] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
[    0.938714] pci 0000:00:1c.6:   bridge window [mem 0xfe300000-0xfe3fffff]
[    0.938813] pci 0000:00:1c.7: PCI bridge to [bus 0a-0a]
[    0.938905] pci 0000:00:1c.7:   bridge window [io  0xb000-0xbfff]
[    0.939000] pci 0000:00:1c.7:   bridge window [mem 0xfe200000-0xfe2fffff]
[    0.939114] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.939208] pci 0000:00:01.0: setting latency timer to 64
[    0.939215] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.939310] pci 0000:00:1c.0: setting latency timer to 64
[    0.939316] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.939412] pci 0000:00:1c.1: setting latency timer to 64
[    0.939418] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.939514] pci 0000:00:1c.2: setting latency timer to 64
[    0.939521] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.939614] pci 0000:00:1c.3: setting latency timer to 64
[    0.939619] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.939712] pci 0000:00:1c.4: setting latency timer to 64
[    0.939717] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.939811] pci 0000:00:1c.5: setting latency timer to 64
[    0.939816] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.939914] pci 0000:00:1c.6: setting latency timer to 64
[    0.939919] pci 0000:08:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.940028] pci 0000:08:00.0: setting latency timer to 64
[    0.940034] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.940131] pci 0000:00:1c.7: setting latency timer to 64
[    0.940134] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.940135] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.940136] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.940137] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
[    0.940139] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.940140] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
[    0.940141] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.940143] pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
[    0.940144] pci_bus 0000:06: resource 1 [mem 0xfe400000-0xfe4fffff]
[    0.940145] pci_bus 0000:07: resource 0 [io  0xd000-0xdfff]
[    0.940146] pci_bus 0000:07: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.940148] pci_bus 0000:08: resource 0 [io  0xc000-0xcfff]
[    0.940149] pci_bus 0000:08: resource 1 [mem 0xfe300000-0xfe3fffff]
[    0.940150] pci_bus 0000:08: resource 4 [io  0x0000-0x0cf7]
[    0.940151] pci_bus 0000:08: resource 5 [io  0x0d00-0xffff]
[    0.940152] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[    0.940153] pci_bus 0000:08: resource 7 [mem 0xc0000000-0xffffffff]
[    0.940155] pci_bus 0000:09: resource 0 [io  0xc000-0xcfff]
[    0.940156] pci_bus 0000:09: resource 1 [mem 0xfe300000-0xfe3fffff]
[    0.940157] pci_bus 0000:09: resource 4 [io  0xc000-0xcfff]
[    0.940158] pci_bus 0000:09: resource 5 [mem 0xfe300000-0xfe3fffff]
[    0.940159] pci_bus 0000:09: resource 8 [io  0x0000-0x0cf7]
[    0.940160] pci_bus 0000:09: resource 9 [io  0x0d00-0xffff]
[    0.940162] pci_bus 0000:09: resource 10 [mem 0x000a0000-0x000bffff]
[    0.940163] pci_bus 0000:09: resource 11 [mem 0xc0000000-0xffffffff]
[    0.940164] pci_bus 0000:0a: resource 0 [io  0xb000-0xbfff]
[    0.940165] pci_bus 0000:0a: resource 1 [mem 0xfe200000-0xfe2fffff]
[    0.940181] NET: Registered protocol family 2
[    0.940406] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.941136] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.942145] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.942337] TCP: Hash tables configured (established 524288 bind 65536)
[    0.942432] TCP reno registered
[    0.942533] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.942651] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.942800] NET: Registered protocol family 1
[    0.942952] RPC: Registered named UNIX socket transport module.
[    0.943061] RPC: Registered udp transport module.
[    0.943156] RPC: Registered tcp transport module.
[    0.943247] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.943362] pci 0000:00:1a.0: EHCI: BIOS handoff
[    1.066979] pci 0000:00:1d.0: EHCI: BIOS handoff
[    1.189865] pci 0000:01:00.0: Boot video device
[    1.189936] PCI: CLS 64 bytes, default 64
[    1.189969] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.190064] Placing 64MB software IO TLB between ffff8800bafa3000 - ffff8800befa3000
[    1.190200] software IO TLB at phys 0xbafa3000 - 0xbefa3000
[    1.191907] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x17
[    1.192005] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x17
[    1.192104] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x17
[    1.192202] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x17
[    1.192301] microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x17
[    1.192401] microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x17
[    1.192500] microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x17
[    1.192598] microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x17
[    1.192719] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.192997] audit: initializing netlink socket (disabled)
[    1.193095] type=2000 audit(1329300629.847:1): initialized
[    1.211796] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.213974] VFS: Disk quotas dquot_6.5.2
[    1.214111] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.214674] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[    1.215191] msgmni has been set to 15921
[    1.215342] SELinux:  Registering netfilter hooks
[    1.215592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.215728] io scheduler noop registered
[    1.215821] io scheduler deadline registered
[    1.215958] io scheduler cfq registered (default)
[    1.216112] pcieport 0000:00:01.0: setting latency timer to 64
[    1.216129] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.216200] pcieport 0000:00:1c.0: setting latency timer to 64
[    1.216237] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    1.216306] pcieport 0000:00:1c.1: setting latency timer to 64
[    1.216342] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    1.216412] pcieport 0000:00:1c.2: setting latency timer to 64
[    1.216448] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[    1.216518] pcieport 0000:00:1c.3: setting latency timer to 64
[    1.216554] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[    1.216624] pcieport 0000:00:1c.4: setting latency timer to 64
[    1.216660] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
[    1.216730] pcieport 0000:00:1c.5: setting latency timer to 64
[    1.216767] pcieport 0000:00:1c.5: irq 46 for MSI/MSI-X
[    1.216844] pcieport 0000:00:1c.7: setting latency timer to 64
[    1.216881] pcieport 0000:00:1c.7: irq 47 for MSI/MSI-X
[    1.217017] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.217147] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.481787] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.559268] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.575817] Non-volatile memory driver v1.3
[    1.575910] Linux agpgart interface v0.103
[    1.576190] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.576329] ACPI: Power Button [PWRB]
[    1.576461] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.576599] ACPI: Power Button [PWRF]
[    1.576863] Monitor-Mwait will be used to enter C-1 state
[    1.578535] [drm] Initialized drm 1.1.0 20060810
[    1.578680] [drm] radeon defaulting to kernel modesetting.
[    1.578777] [drm] radeon kernel modesetting enabled.
[    1.578889] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.578986] radeon 0000:01:00.0: setting latency timer to 64
[    1.579080] [drm] initializing kernel modesetting (CAYMAN 0x1002:0x6718 0x1043:0x03BC).
[    1.579242] [drm] register mmio base: 0xFE620000
[    1.579336] [drm] register mmio size: 131072
[    1.579500] ATOM BIOS: 6718.13.10.0.9.AS03.U13
[    1.579637] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[    1.581031] radeon 0000:01:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[    1.581166] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[    1.581301] [drm] Detected VRAM RAM=2048M, BAR=256M
[    1.581397] [drm] RAM width 256bits DDR
[    1.581509] [TTM] Zone  kernel: Available graphics memory: 4075972 kiB.
[    1.581623] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
[    1.581721] [TTM] Initializing pool allocator.
[    1.581825] [drm] radeon: 2048M of VRAM memory ready
[    1.581919] [drm] radeon: 512M of GTT memory ready.
[    1.582019] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    1.582116] [drm] Driver supports precise vblank timestamp query.
[    1.582234] radeon 0000:01:00.0: irq 48 for MSI/MSI-X
[    1.582238] radeon 0000:01:00.0: radeon: using MSI.
[    1.582356] [drm] radeon: irq initialized.
[    1.582449] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    1.582818] [drm] Loading CAYMAN Microcode
[    2.192293] Refined TSC clocksource calibration: 3411.127 MHz.
[    2.192392] Switching to clocksource tsc
[   62.225394] ni_cp: Failed to load firmware "radeon/CAYMAN_pfp.bin"
[   62.225489] [drm:cayman_startup] *ERROR* Failed to load firmware!
[   62.225583] radeon 0000:01:00.0: disabling GPU acceleration
[   62.226705] radeon 0000:01:00.0: ffff8802349e2000 unpin not necessary
[   62.226799] radeon 0000:01:00.0: ffff8802349e2000 unpin not necessary
[   62.226901] [drm:cayman_init] *ERROR* radeon: MC ucode required for NI+.
[   62.226994] radeon 0000:01:00.0: Fatal error during GPU init
[   62.227086] [drm] radeon: finishing device.
[   62.228192] [TTM] Finalizing pool allocator.
[   62.228293] [TTM] Zone  kernel: Used memory at exit: 0 kiB.
[   62.228396] [TTM] Zone   dma32: Used memory at exit: 0 kiB.
[   62.228490] [drm] radeon: ttm finalized
[   62.228660] radeon 0000:01:00.0: PCI INT A disabled
[   62.228754] radeon: probe of 0000:01:00.0 failed with error -22
[   62.228869] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
[   62.229929] brd: module loaded
[   62.230506] loop: module loaded
[   62.230712] ahci 0000:00:1f.2: version 3.0
[   62.230723] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[   62.230848] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
[   62.241351] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x12 impl SATA mode
[   62.241487] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[   62.241622] ahci 0000:00:1f.2: setting latency timer to 64
[   62.243742] scsi0 : ahci
[   62.243889] scsi1 : ahci
[   62.244033] scsi2 : ahci
[   62.244170] scsi3 : ahci
[   62.244308] scsi4 : ahci
[   62.244454] scsi5 : ahci
[   62.244638] ata1: DUMMY
[   62.244730] ata2: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705180 irq 48
[   62.244863] ata3: DUMMY
[   62.244952] ata4: DUMMY
[   62.245042] ata5: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705300 irq 48
[   62.245171] ata6: DUMMY
[   62.245277] ahci 0000:0a:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   62.245420] ahci 0000:0a:00.0: irq 49 for MSI/MSI-X
[   62.245470] ahci 0000:0a:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[   62.245601] ahci 0000:0a:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[   62.245735] ahci 0000:0a:00.0: setting latency timer to 64
[   62.245937] scsi6 : ahci
[   62.246081] scsi7 : ahci
[   62.246214] ata7: SATA max UDMA/133 abar m512@0xfe210000 port 0xfe210100 irq 49
[   62.246349] ata8: SATA max UDMA/133 abar m512@0xfe210000 port 0xfe210180 irq 49
[   62.246610] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[   62.246702] e100: Copyright(c) 1999-2006 Intel Corporation
[   62.246816] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[   62.246909] e1000: Copyright (c) 1999-2006 Intel Corporation.
[   62.247020] sky2: driver version 1.30
[   62.247172] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   62.247275] r8169 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   62.247387] r8169 0000:07:00.0: setting latency timer to 64
[   62.247443] r8169 0000:07:00.0: irq 50 for MSI/MSI-X
[   62.247584] r8169 0000:07:00.0: eth0: RTL8168e/8111e at 0xffffc90000c7a000, f4:6d:04:96:8f:f7, XID 0c200000 IRQ 50
[   62.247719] r8169 0000:07:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   62.247937] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   62.248031] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
[   62.248044] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[   62.248143] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   62.248146] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[   62.248246] drivers/usb/core/inode.c: creating file 'devices'
[   62.248248] drivers/usb/core/inode.c: creating file '001'
[   62.248273] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[   62.248416] ehci_hcd 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[   62.248419] ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[   62.248429] ehci_hcd 0000:00:1a.0: support lpm
[   62.248437] ehci_hcd 0000:00:1a.0: debug port 2
[   62.248530] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[   62.252417] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[   62.252418] ehci_hcd 0000:00:1a.0: supports USB remote wakeup
[   62.252428] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfe707000
[   62.252523] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[   62.256410] ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[   62.262330] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[   62.262437] usb usb1: default language 0x0409
[   62.262441] usb usb1: udev 1, busnum 1, minor = 0
[   62.262442] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   62.262537] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   62.262670] usb usb1: Product: EHCI Host Controller
[   62.262763] usb usb1: Manufacturer: Linux 3.2.1-gentoo-r2 ehci_hcd
[   62.262855] usb usb1: SerialNumber: 0000:00:1a.0
[   62.262983] usb usb1: usb_probe_device
[   62.262985] usb usb1: configuration #1 chosen from 1 choice
[   62.262989] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[   62.263014] hub 1-0:1.0: usb_probe_interface
[   62.263015] hub 1-0:1.0: usb_probe_interface - got id
[   62.263016] hub 1-0:1.0: USB hub found
[   62.263108] hub 1-0:1.0: 2 ports detected
[   62.263200] hub 1-0:1.0: standalone hub
[   62.263201] hub 1-0:1.0: no power switching (usb 1.0)
[   62.263202] hub 1-0:1.0: individual port over-current protection
[   62.263203] hub 1-0:1.0: power on to power good time: 20ms
[   62.263205] hub 1-0:1.0: local power source is good
[   62.263206] hub 1-0:1.0: trying to enable port power on non-switchable hub
[   62.263217] drivers/usb/core/inode.c: creating file '001'
[   62.263239] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[   62.263344] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   62.263347] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[   62.263442] drivers/usb/core/inode.c: creating file '002'
[   62.263467] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[   62.263600] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[   62.263603] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[   62.263611] ehci_hcd 0000:00:1d.0: support lpm
[   62.263620] ehci_hcd 0000:00:1d.0: debug port 2
[   62.263713] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[   62.267606] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[   62.267607] ehci_hcd 0000:00:1d.0: supports USB remote wakeup
[   62.267610] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe706000
[   62.267708] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[   62.271599] ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[   62.277322] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[   62.277427] usb usb2: default language 0x0409
[   62.277430] usb usb2: udev 1, busnum 2, minor = 128
[   62.277431] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   62.277524] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   62.277653] usb usb2: Product: EHCI Host Controller
[   62.277746] usb usb2: Manufacturer: Linux 3.2.1-gentoo-r2 ehci_hcd
[   62.277839] usb usb2: SerialNumber: 0000:00:1d.0
[   62.277966] usb usb2: usb_probe_device
[   62.277967] usb usb2: configuration #1 chosen from 1 choice
[   62.277971] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[   62.277994] hub 2-0:1.0: usb_probe_interface
[   62.277995] hub 2-0:1.0: usb_probe_interface - got id
[   62.277996] hub 2-0:1.0: USB hub found
[   62.278090] hub 2-0:1.0: 2 ports detected
[   62.278182] hub 2-0:1.0: standalone hub
[   62.278183] hub 2-0:1.0: no power switching (usb 1.0)
[   62.278184] hub 2-0:1.0: individual port over-current protection
[   62.278185] hub 2-0:1.0: power on to power good time: 20ms
[   62.278187] hub 2-0:1.0: local power source is good
[   62.278188] hub 2-0:1.0: trying to enable port power on non-switchable hub
[   62.278199] drivers/usb/core/inode.c: creating file '001'
[   62.278232] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   62.278327] ohci_hcd: block sizes: ed 80 td 96
[   62.278348] uhci_hcd: USB Universal Host Controller Interface driver
[   62.278483] usbcore: registered new interface driver usblp
[   62.278576] Initializing USB Mass Storage driver...
[   62.278690] usbcore: registered new interface driver usb-storage
[   62.278786] USB Mass Storage support registered.
[   62.278900] usbcore: registered new interface driver libusual
[   62.279046] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[   62.279142] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[   62.279964] serio: i8042 KBD port at 0x60,0x64 irq 1
[   62.280110] mousedev: PS/2 mouse device common for all mice
[   62.280310] rtc_cmos 00:04: RTC can wake from S4
[   62.280490] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[   62.280608] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[   62.280728] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   62.280970] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[   62.281134] cpuidle: using governor ladder
[   62.281225] cpuidle: using governor menu
[   62.281318] EFI Variables Facility v0.08 2004-May-17
[   62.281807] usbcore: registered new interface driver usbhid
[   62.281900] usbhid: USB HID core driver
[   62.282203] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   62.282372] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[   62.282389] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   62.302038] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   62.302202] snd_hda_intel 0000:01:00.1: irq 52 for MSI/MSI-X
[   62.302216] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[   62.305627] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[   62.305921] ALSA device list:
[   62.306016]   #0: HDA Intel PCH at 0xfe700000 irq 51
[   62.306110]   #1: HD-Audio Generic at 0xfe640000 irq 52
[   62.306247] Netfilter messages via NETLINK v0.30.
[   62.306350] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   62.306552] ctnetlink v0.93: registering with nfnetlink.
[   62.306828] ip_tables: (C) 2000-2006 Netfilter Core Team
[   62.306940] TCP cubic registered
[   62.307034] Initializing XFRM netlink socket
[   62.307240] NET: Registered protocol family 10
[   62.307640] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   62.307757] IPv6 over IPv4 tunneling driver
[   62.308092] NET: Registered protocol family 17
[   62.308190] Registering the dns_resolver key type
[   62.308360] PM: Hibernation image not present or could not be loaded.
[   62.308367] registered taskstats version 1
[   62.308804]   Magic number: 0:776:173
[   62.308904] pci_express 0000:00:1c.0:pcie01: hash matches
[   62.309017] console [netcon0] enabled
[   62.309109] netconsole: network logging started
[   62.311240] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[   62.362284] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
[   62.362287] hub 1-0:1.0: port 1: status 0501 change 0001
[   62.377273] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
[   62.377275] hub 2-0:1.0: port 1: status 0501 change 0001
[   62.462225] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
[   62.462231] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[   62.513394] ehci_hcd 0000:00:1a.0: port 1 high speed
[   62.513396] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[   62.549171] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   62.549281] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   62.550887] ata2.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
[   62.550982] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[   62.551181] ata8: SATA link down (SStatus 0 SControl 300)
[   62.551303] ata7: SATA link down (SStatus 0 SControl 300)
[   62.551843] ata5.00: ATAPI: ATAPI   iHAS124   B, AL0Q, max UDMA/100
[   62.552647] ata5.00: configured for UDMA/100
[   62.553071] ata2.00: configured for UDMA/133
[   62.553226] scsi 1:0:0:0: Direct-Access     ATA      WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[   62.553452] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[   62.553486] sd 1:0:0:0: Attached scsi generic sg0 type 0
[   62.553702] sd 1:0:0:0: [sda] Write Protect is off
[   62.553813] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   62.553826] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   62.554860] scsi 4:0:0:0: CD-ROM            ATAPI    iHAS124   B      AL0Q PQ: 0 ANSI: 5
[   62.558242] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   62.559617] cdrom: Uniform CD-ROM driver Revision: 3.20
[   62.559780] sr 4:0:0:0: Attached scsi CD-ROM sr0
[   62.559834] sr 4:0:0:0: Attached scsi generic sg1 type 5
[   62.564155] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[   62.593662]  sda: sda1 sda2 < sda5 sda6 > sda3 sda4
[   62.593997] sd 1:0:0:0: [sda] Attached SCSI disk
[   62.594101] md: Waiting for all devices to be available before autodetect
[   62.594197] md: If you don't use raid, use raid=noautodetect
[   62.594370] md: Autodetecting RAID arrays.
[   62.594460] md: Scanned 0 and added 0 devices.
[   62.594551] md: autorun ...
[   62.594642] md: ... autorun DONE.
[   62.613583] EXT4-fs (sda5): couldn't mount as ext3 due to feature incompatibilities
[   62.615327] ehci_hcd 0000:00:1a.0: port 1 high speed
[   62.615329] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[   62.629236] EXT4-fs (sda5): couldn't mount as ext2 due to feature incompatibilities
[   62.665936] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   62.666076] VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
[   62.666742] Freeing unused kernel memory: 636k freed
[   62.666883] Write protecting the kernel read-only data: 12288k
[   62.667232] Freeing unused kernel memory: 112k freed
[   62.669887] Freeing unused kernel memory: 1548k freed
[   62.678169] ehci_hcd 0000:00:1a.0: set dev address 2 for port 1
[   62.678173] ehci_hcd 0000:00:1a.0: LPM: no device attached
[   62.678417] usb 1-1: udev 2, busnum 1, minor = 1
[   62.678419] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[   62.678513] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   62.701611] usb 1-1: usb_probe_device
[   62.701613] usb 1-1: configuration #1 chosen from 1 choice
[   62.701656] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[   62.701681] hub 1-1:1.0: usb_probe_interface
[   62.701682] hub 1-1:1.0: usb_probe_interface - got id
[   62.701683] hub 1-1:1.0: USB hub found
[   62.701901] hub 1-1:1.0: 6 ports detected
[   62.701992] hub 1-1:1.0: standalone hub
[   62.701993] hub 1-1:1.0: individual port power switching
[   62.701994] hub 1-1:1.0: individual port over-current protection
[   62.701994] hub 1-1:1.0: Single TT
[   62.701996] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[   62.701997] hub 1-1:1.0: power on to power good time: 100ms
[   62.702275] hub 1-1:1.0: local power source is good
[   62.702276] hub 1-1:1.0: enabling power on all ports
[   62.703031] drivers/usb/core/inode.c: creating file '002'
[   62.703038] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
[   62.703042] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[   62.753363] ehci_hcd 0000:00:1d.0: port 1 high speed
[   62.753366] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[   62.802712] usb 1-1: link qh256-0001/ffff88023541ac00 start 1 [1/0 us]
[   62.803999] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[   62.855171] ehci_hcd 0000:00:1d.0: port 1 high speed
[   62.855174] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[   62.918010] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1
[   62.918014] ehci_hcd 0000:00:1d.0: LPM: no device attached
[   62.918259] usb 2-1: udev 2, busnum 2, minor = 129
[   62.918261] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[   62.918355] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   62.918486] usb 2-1: usb_probe_device
[   62.918487] usb 2-1: configuration #1 chosen from 1 choice
[   62.918638] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[   62.918661] hub 2-1:1.0: usb_probe_interface
[   62.918662] hub 2-1:1.0: usb_probe_interface - got id
[   62.918663] hub 2-1:1.0: USB hub found
[   62.918883] hub 2-1:1.0: 8 ports detected
[   62.918976] hub 2-1:1.0: standalone hub
[   62.918977] hub 2-1:1.0: individual port power switching
[   62.918978] hub 2-1:1.0: individual port over-current protection
[   62.918979] hub 2-1:1.0: Single TT
[   62.918980] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
[   62.918981] hub 2-1:1.0: power on to power good time: 100ms
[   62.919257] hub 2-1:1.0: local power source is good
[   62.919258] hub 2-1:1.0: enabling power on all ports
[   62.920267] drivers/usb/core/inode.c: creating file '002'
[   62.920279] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000
[   63.020068] hub 2-1:1.0: port 2: status 0101 change 0001
[   63.020567] hub 2-1:1.0: port 5: status 0101 change 0001
[   63.020942] hub 2-1:1.0: port 7: status 0101 change 0001
[   63.120807] usb 2-1: link qh256-0001/ffff880235bb0a00 start 1 [1/0 us]
[   63.120816] hub 2-1:1.0: state 7 ports 8 chg 00a4 evt 0000
[   63.120881] hub 2-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
[   63.124162] kbd_mode used greatest stack depth: 5408 bytes left
[   63.131873] hub 2-1:1.0: port 2 not reset yet, waiting 10ms
[   63.146497] loadkeys used greatest stack depth: 4960 bytes left
[   63.146662] init-early.sh used greatest stack depth: 4672 bytes left
[   63.180903] fstabinfo used greatest stack depth: 4632 bytes left
[   63.193835] usb 2-1.2: new high-speed USB device number 3 using ehci_hcd
[   63.204825] hub 2-1:1.0: port 2 not reset yet, waiting 10ms
[   63.279027] usb 2-1.2: udev 3, busnum 2, minor = 130
[   63.279028] usb 2-1.2: New USB device found, idVendor=05ac, idProduct=9136
[   63.279124] usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   63.279296] usb 2-1.2: usb_probe_device
[   63.279297] usb 2-1.2: configuration #1 chosen from 1 choice
[   63.279404] usb 2-1.2: adding 2-1.2:1.0 (config #1, interface 0)
[   63.279427] hub 2-1.2:1.0: usb_probe_interface
[   63.279428] hub 2-1.2:1.0: usb_probe_interface - got id
[   63.279430] hub 2-1.2:1.0: USB hub found
[   63.279650] hub 2-1.2:1.0: 4 ports detected
[   63.279743] hub 2-1.2:1.0: compound device; port removable status: RRRF
[   63.279744] hub 2-1.2:1.0: ganged power switching
[   63.279745] hub 2-1.2:1.0: global over-current protection
[   63.279905] hub 2-1.2:1.0: TT per port
[   63.279906] hub 2-1.2:1.0: TT requires at most 8 FS bit times (666 ns)
[   63.279907] hub 2-1.2:1.0: power on to power good time: 100ms
[   63.280149] hub 2-1.2:1.0: local power source is good
[   63.280150] hub 2-1.2:1.0: no over-current condition exists
[   63.280151] hub 2-1.2:1.0: enabling power on all ports
[   63.280650] drivers/usb/core/inode.c: creating file '003'
[   63.280774] hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s
[   63.291770] hub 2-1:1.0: port 5 not reset yet, waiting 10ms
[   63.353731] usb 2-1.5: new high-speed USB device number 4 using ehci_hcd
[   63.364721] hub 2-1:1.0: port 5 not reset yet, waiting 10ms
[   63.379712] hub 2-1.2:1.0: port 1: status 0301 change 0001
[   63.380208] hub 2-1.2:1.0: port 4: status 0101 change 0001
[   63.439670] usb 2-1.5: default language 0x0409
[   63.440048] usb 2-1.5: udev 4, busnum 2, minor = 131
[   63.440050] usb 2-1.5: New USB device found, idVendor=05e3, idProduct=0608
[   63.440147] usb 2-1.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   63.440280] usb 2-1.5: Product: USB2.0 Hub
[   63.440420] usb 2-1.5: usb_probe_device
[   63.440423] usb 2-1.5: configuration #1 chosen from 1 choice
[   63.440676] usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0)
[   63.440706] hub 2-1.5:1.0: usb_probe_interface
[   63.440707] hub 2-1.5:1.0: usb_probe_interface - got id
[   63.440708] hub 2-1.5:1.0: USB hub found
[   63.441169] hub 2-1.5:1.0: 4 ports detected
[   63.441261] hub 2-1.5:1.0: standalone hub
[   63.441262] hub 2-1.5:1.0: ganged power switching
[   63.441263] hub 2-1.5:1.0: global over-current protection
[   63.441264] hub 2-1.5:1.0: Single TT
[   63.441265] hub 2-1.5:1.0: TT requires at most 32 FS bit times (2664 ns)
[   63.441266] hub 2-1.5:1.0: Port indicators are supported
[   63.441267] hub 2-1.5:1.0: power on to power good time: 100ms
[   63.441669] hub 2-1.5:1.0: local power source is good
[   63.441670] hub 2-1.5:1.0: no over-current condition exists
[   63.441671] hub 2-1.5:1.0: enabling power on all ports
[   63.443175] drivers/usb/core/inode.c: creating file '004'
[   63.443293] hub 2-1:1.0: port 7, status 0101, change 0000, 12 Mb/s
[   63.446805] mknod used greatest stack depth: 4544 bytes left
[   63.453666] hub 2-1:1.0: port 7 not reset yet, waiting 10ms
[   63.479574] usb 2-1.2: link qh256-0001/ffff8802359d2f80 start 2 [1/0 us]
[   63.515627] usb 2-1.7: new full-speed USB device number 5 using ehci_hcd
[   63.526615] hub 2-1:1.0: port 7 not reset yet, waiting 10ms
[   63.543981] usb 2-1.5: link qh256-0001/ffff8802359d2000 start 3 [1/0 us]
[   63.563191] udevd[1255]: starting version 171
[   63.581879] blkid used greatest stack depth: 4328 bytes left
[   63.601942] usb 2-1.7: udev 5, busnum 2, minor = 132
[   63.601944] usb 2-1.7: New USB device found, idVendor=0cf3, idProduct=3000
[   63.601945] usb 2-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   63.601978] usb 2-1.7: usb_probe_device
[   63.601980] usb 2-1.7: configuration #1 chosen from 1 choice
[   63.602066] usb 2-1.7: adding 2-1.7:1.0 (config #1, interface 0)
[   63.602089] drivers/usb/core/inode.c: creating file '005'
[   63.602190] hub 2-1:1.0: state 7 ports 8 chg 0000 evt fe80
[   63.602314] hub 2-1.2:1.0: state 7 ports 4 chg 0012 evt 0000
[   63.602438] hub 2-1.2:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
[   63.613559] hub 2-1.2:1.0: port 1 not reset yet, waiting 10ms
[   63.675521] usb 2-1.2.1: new low-speed USB device number 6 using ehci_hcd
[   63.687508] hub 2-1.2:1.0: port 1 not reset yet, waiting 10ms
[   63.764709] usb 2-1.2.1: skipped 1 descriptor after interface
[   63.765083] usb 2-1.2.1: default language 0x0409
[   63.767081] usb 2-1.2.1: udev 6, busnum 2, minor = 133
[   63.767082] usb 2-1.2.1: New USB device found, idVendor=1bcf, idProduct=0535
[   63.767083] usb 2-1.2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[   63.767085] usb 2-1.2.1: Product: 2.4GHz 2way RF Mouse Receiver
[   63.767111] usb 2-1.2.1: usb_probe_device
[   63.767112] usb 2-1.2.1: configuration #1 chosen from 1 choice
[   63.767586] usb 2-1.2.1: adding 2-1.2.1:1.0 (config #1, interface 0)
[   63.767603] usbhid 2-1.2.1:1.0: usb_probe_interface
[   63.767604] usbhid 2-1.2.1:1.0: usb_probe_interface - got id
[   63.771699] input: 2.4GHz 2way RF Mouse Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1:1.0/input/input3
[   63.771708] usb 2-1.2.1: link qh8-0601/ffff880235a7b280 start 4 [1/2 us]
[   63.771731] usbhid 2-1.2.1:1.0: looking for a minor, starting at 96
[   63.771749] generic-usb 0003:1BCF:0535.0001: input,hiddev0,hidraw0: USB HID v1.11 Mouse [2.4GHz 2way RF Mouse Receiver] on usb-0000:00:1d.0-1.2.1/input0
[   63.771758] drivers/usb/core/inode.c: creating file '006'
[   63.771831] hub 2-1.2:1.0: port 4, status 0101, change 0000, 12 Mb/s
[   63.782449] hub 2-1.2:1.0: port 4 not reset yet, waiting 10ms
[   63.844410] usb 2-1.2.4: new high-speed USB device number 7 using ehci_hcd
[   63.855400] hub 2-1.2:1.0: port 4 not reset yet, waiting 10ms
[   63.929601] usb 2-1.2.4: udev 7, busnum 2, minor = 134
[   63.929603] usb 2-1.2.4: New USB device found, idVendor=05ac, idProduct=9137
[   63.929604] usb 2-1.2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   63.929630] usb 2-1.2.4: usb_probe_device
[   63.929631] usb 2-1.2.4: configuration #1 chosen from 1 choice
[   63.929728] usb 2-1.2.4: adding 2-1.2.4:1.0 (config #1, interface 0)
[   63.929742] hub 2-1.2.4:1.0: usb_probe_interface
[   63.929743] hub 2-1.2.4:1.0: usb_probe_interface - got id
[   63.929744] hub 2-1.2.4:1.0: USB hub found
[   63.929851] hub 2-1.2.4:1.0: 3 ports detected
[   63.929852] hub 2-1.2.4:1.0: compound device; port removable status: FFF
[   63.929853] hub 2-1.2.4:1.0: ganged power switching
[   63.929854] hub 2-1.2.4:1.0: global over-current protection
[   63.929979] hub 2-1.2.4:1.0: TT per port
[   63.929981] hub 2-1.2.4:1.0: TT requires at most 8 FS bit times (666 ns)
[   63.929982] hub 2-1.2.4:1.0: power on to power good time: 100ms
[   63.930224] hub 2-1.2.4:1.0: local power source is good
[   63.930225] hub 2-1.2.4:1.0: no over-current condition exists
[   63.930226] hub 2-1.2.4:1.0: enabling power on all ports
[   63.930600] drivers/usb/core/inode.c: creating file '007'
[   63.930608] hub 2-1.5:1.0: state 7 ports 4 chg 0000 evt 0000
[   63.930610] hub 2-1.2:1.0: state 7 ports 4 chg 0000 evt 0010
[   64.030290] hub 2-1.2.4:1.0: port 1: status 0101 change 0001
[   64.030534] hub 2-1.2.4:1.0: port 2: status 0101 change 0001
[   64.030783] hub 2-1.2.4:1.0: port 3: status 0101 change 0001
[   64.130144] usb 2-1.2.4: link qh256-0001/ffff88023541ad00 start 5 [1/0 us]
[   64.130149] hub 2-1.2.4:1.0: state 7 ports 3 chg 000e evt 0000
[   64.130223] hub 2-1.2.4:1.0: port 1, status 0101, change 0000, 12 Mb/s
[   64.141212] hub 2-1.2.4:1.0: port 1 not reset yet, waiting 10ms
[   64.203175] usb 2-1.2.4.1: new full-speed USB device number 8 using ehci_hcd
[   64.214165] hub 2-1.2.4:1.0: port 1 not reset yet, waiting 10ms
[   64.288038] usb 2-1.2.4.1: ep0 maxpacket = 8
[   64.290116] usb 2-1.2.4.1: skipped 11 descriptors after interface
[   64.290117] usb 2-1.2.4.1: skipped 2 descriptors after interface
[   64.290118] usb 2-1.2.4.1: skipped 1 descriptor after endpoint
[   64.290120] usb 2-1.2.4.1: skipped 2 descriptors after interface
[   64.290121] usb 2-1.2.4.1: skipped 1 descriptor after endpoint
[   64.290122] usb 2-1.2.4.1: skipped 2 descriptors after interface
[   64.290123] usb 2-1.2.4.1: skipped 1 descriptor after endpoint
[   64.290239] usb 2-1.2.4.1: default language 0x0409
[   64.290614] usb 2-1.2.4.1: udev 8, busnum 2, minor = 135
[   64.290616] usb 2-1.2.4.1: New USB device found, idVendor=05ac, idProduct=2912
[   64.290617] usb 2-1.2.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   64.290618] usb 2-1.2.4.1: Product: Apple USB audio device
[   64.290619] usb 2-1.2.4.1: Manufacturer: Apple Inc.
[   64.290652] usb 2-1.2.4.1: usb_probe_device
[   64.290654] usb 2-1.2.4.1: configuration #1 chosen from 1 choice
[   64.290743] usb 2-1.2.4.1: adding 2-1.2.4.1:1.0 (config #1, interface 0)
[   64.290763] usb 2-1.2.4.1: adding 2-1.2.4.1:1.1 (config #1, interface 1)
[   64.290787] usb 2-1.2.4.1: adding 2-1.2.4.1:1.2 (config #1, interface 2)
[   64.290809] drivers/usb/core/inode.c: creating file '008'
[   64.290994] hub 2-1.2.4:1.0: port 2, status 0101, change 0000, 12 Mb/s
[   64.302111] hub 2-1.2.4:1.0: port 2 not reset yet, waiting 10ms
[   64.364070] usb 2-1.2.4.2: new high-speed USB device number 9 using ehci_hcd
[   64.375060] hub 2-1.2.4:1.0: port 2 not reset yet, waiting 10ms
[   64.466253] usb 2-1.2.4.2: skipped 1 descriptor after configuration
[   64.466255] usb 2-1.2.4.2: skipped 4 descriptors after interface
[   64.466256] usb 2-1.2.4.2: skipped 1 descriptor after endpoint
[   64.466257] usb 2-1.2.4.2: skipped 22 descriptors after interface
[   64.466499] usb 2-1.2.4.2: default language 0x0409
[   64.467873] usb 2-1.2.4.2: udev 9, busnum 2, minor = 136
[   64.467874] usb 2-1.2.4.2: New USB device found, idVendor=05ac, idProduct=8508
[   64.467875] usb 2-1.2.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   64.467876] usb 2-1.2.4.2: Product: Display iSight
[   64.467877] usb 2-1.2.4.2: Manufacturer: Apple Inc.
[   64.467878] usb 2-1.2.4.2: SerialNumber: 8T96R10JA2C43L00
[   64.467904] usb 2-1.2.4.2: usb_probe_device
[   64.467905] usb 2-1.2.4.2: configuration #1 chosen from 1 choice
[   64.468127] usb 2-1.2.4.2: adding 2-1.2.4.2:1.0 (config #1, interface 0)
[   64.468638] usb 2-1.2.4.2: adding 2-1.2.4.2:1.1 (config #1, interface 1)
[   64.468654] usb 2-1.2.4.2: adding 2-1.2.4.2:1.2 (config #1, interface 2)
[   64.468668] drivers/usb/core/inode.c: creating file '009'
[   64.468748] hub 2-1.2.4:1.0: port 3, status 0101, change 0000, 12 Mb/s
[   64.478994] hub 2-1.2.4:1.0: port 3 not reset yet, waiting 10ms
[   64.540953] usb 2-1.2.4.3: new full-speed USB device number 10 using ehci_hcd
[   64.552943] hub 2-1.2.4:1.0: port 3 not reset yet, waiting 10ms
[   64.628145] usb 2-1.2.4.3: skipped 1 descriptor after interface
[   64.628268] usb 2-1.2.4.3: default language 0x0409
[   64.628643] usb 2-1.2.4.3: udev 10, busnum 2, minor = 137
[   64.628644] usb 2-1.2.4.3: New USB device found, idVendor=05ac, idProduct=9236
[   64.628646] usb 2-1.2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   64.628647] usb 2-1.2.4.3: Product: Apple LED Cinema Display
[   64.628648] usb 2-1.2.4.3: Manufacturer: Apple Inc.
[   64.628683] usb 2-1.2.4.3: usb_probe_device
[   64.628685] usb 2-1.2.4.3: configuration #1 chosen from 1 choice
[   64.628769] usb 2-1.2.4.3: adding 2-1.2.4.3:1.0 (config #1, interface 0)
[   64.628788] usbhid 2-1.2.4.3:1.0: usb_probe_interface
[   64.628789] usbhid 2-1.2.4.3:1.0: usb_probe_interface - got id
[   64.630768] usbhid 2-1.2.4.3:1.0: looking for a minor, starting at 96
[   64.630791] generic-usb 0003:05AC:9236.0002: hiddev0,hidraw1: USB HID v1.11 Device [Apple Inc. Apple LED Cinema Display] on usb-0000:00:1d.0-1.2.4.3/input0
[   64.630800] drivers/usb/core/inode.c: creating file '010'
[   64.630808] hub 2-1.2.4:1.0: state 7 ports 3 chg 0000 evt 0008
[   65.760817] EXT4-fs (sda5): re-mounted. Opts: (null)
[   65.815367] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   65.819062] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[   66.401579] Adding 10746876k swap on /dev/sda6.  Priority:-1 extents:1 across:10746876k 
[   66.660286] r8169 0000:07:00.0: eth0: link down
[   66.660291] r8169 0000:07:00.0: eth0: link down
[   66.660657] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   68.268999] r8169 0000:07:00.0: eth0: link up
[   68.269339] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   79.016692] eth0: no IPv6 routers present
[  670.376192] flush-8:0 used greatest stack depth: 4088 bytes left