From: Dale <rdalek1967@gmail.com>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Re: heat codes
Date: Fri, 13 Mar 2015 06:23:19 -0500 [thread overview]
Message-ID: <5502C8A7.4000204@gmail.com> (raw)
In-Reply-To: <201503130621.02448.michaelkintzios@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 8719 bytes --]
Mick wrote:
>
>
>
> I don't have the same MoBo and have compiled my corresponding chipset
sensor
> driver as a module. It doesn't load unless I manually modprobe it or
set it
> up in /etc/conf.d/modules. This is how many readings I get:
>
> $ sensors
> radeon-pci-0008
> Adapter: PCI adapter
> temp1: +37.0°C (crit = +120.0°C, hyst = +90.0°C)
>
> k10temp-pci-00c3
> Adapter: PCI adapter
> temp1: +36.8°C (high = +70.0°C)
> (crit = +70.0°C, hyst = +69.0°C)
>
> fam15h_power-pci-00c4
> Adapter: PCI adapter
> power1: N/A (crit = 95.09 W)
>
> nct6791-isa-0290
> Adapter: ISA adapter
> in0: +1.38 V (min = +0.00 V, max = +1.74 V)
> in1: +1.03 V (min = +0.00 V, max = +0.00 V) ALARM
> in2: +3.34 V (min = +0.00 V, max = +0.00 V) ALARM
> in3: +3.34 V (min = +0.00 V, max = +0.00 V) ALARM
> in4: +1.01 V (min = +0.00 V, max = +0.00 V) ALARM
> in5: +2.04 V (min = +0.00 V, max = +0.00 V) ALARM
> in6: +0.28 V (min = +0.00 V, max = +0.00 V) ALARM
> in7: +3.44 V (min = +0.00 V, max = +0.00 V) ALARM
> in8: +3.33 V (min = +0.00 V, max = +0.00 V) ALARM
> in9: +0.00 V (min = +0.00 V, max = +0.00 V)
> in10: +0.17 V (min = +0.00 V, max = +0.00 V) ALARM
> in11: +0.17 V (min = +0.00 V, max = +0.00 V) ALARM
> in12: +1.01 V (min = +0.00 V, max = +0.00 V) ALARM
> in13: +1.03 V (min = +0.00 V, max = +0.00 V) ALARM
> in14: +0.21 V (min = +0.00 V, max = +0.00 V) ALARM
> fan1: 1036 RPM (min = 0 RPM)
> fan2: 1695 RPM (min = 0 RPM)
> fan3: 1001 RPM (min = 0 RPM)
> SYSTIN: +31.0°C (high = +0.0°C, hyst = +0.0°C) ALARM
> sensor = thermistor
> CPUTIN: +47.0°C (high = +80.0°C, hyst = +75.0°C)
sensor =
> thermistor
> AUXTIN0: +106.0°C sensor = thermistor
> AUXTIN1: +105.0°C sensor = thermistor
> AUXTIN2: +105.0°C sensor = thermistor
> AUXTIN3: +106.0°C sensor = thermistor
> PCH_CHIP_CPU_MAX_TEMP: +0.0°C
> PCH_CHIP_TEMP: +0.0°C
> PCH_CPU_TEMP: +0.0°C
> PCH_MCH_TEMP: +0.0°C
> intrusion0: ALARM
> intrusion1: ALARM
> beep_enable: disabled
>
> HTH.
I get things like this:
root@fireball / # ls -al /sys/devices/platform/it87.552/
total 0
drwxr-xr-x 4 root root 0 Mar 11 19:25 .
drwxr-xr-x 12 root root 0 Mar 11 19:25 ..
-r--r--r-- 1 root root 4096 Mar 13 06:16 alarms
lrwxrwxrwx 1 root root 0 Mar 11 19:25 driver ->
../../../bus/platform/drivers/it87
-rw-r--r-- 1 root root 4096 Mar 13 06:16 driver_override
-r--r--r-- 1 root root 4096 Mar 13 06:16 fan1_alarm
-rw-r--r-- 1 root root 4096 Mar 4 15:11 fan1_beep
-r--r--r-- 1 root root 4096 Mar 11 19:26 fan1_input
-rw-r--r-- 1 root root 4096 Mar 13 06:16 fan1_min
-r--r--r-- 1 root root 4096 Mar 13 06:16 fan2_alarm
-r--r--r-- 1 root root 4096 Mar 13 06:16 fan2_beep
-r--r--r-- 1 root root 4096 Mar 11 19:26 fan2_input
-rw-r--r-- 1 root root 4096 Mar 13 06:16 fan2_min
-r--r--r-- 1 root root 4096 Mar 13 06:16 fan3_alarm
-r--r--r-- 1 root root 4096 Mar 13 06:16 fan3_beep
-r--r--r-- 1 root root 4096 Mar 11 19:26 fan3_input
-rw-r--r-- 1 root root 4096 Mar 13 06:16 fan3_min
-r--r--r-- 1 root root 4096 Mar 13 06:16 fan4_alarm
-r--r--r-- 1 root root 4096 Mar 13 06:16 fan4_beep
-r--r--r-- 1 root root 4096 Mar 13 06:16 fan4_input
-rw-r--r-- 1 root root 4096 Mar 13 06:16 fan4_min
-r--r--r-- 1 root root 4096 Mar 13 06:16 fan5_alarm
-r--r--r-- 1 root root 4096 Mar 13 06:16 fan5_beep
-r--r--r-- 1 root root 4096 Mar 11 19:26 fan5_input
-rw-r--r-- 1 root root 4096 Mar 13 06:16 fan5_min
drwxr-xr-x 3 root root 0 Mar 11 19:25 hwmon
-r--r--r-- 1 root root 4096 Mar 13 06:16 in0_alarm
-rw-r--r-- 1 root root 4096 Mar 13 06:16 in0_beep
-r--r--r-- 1 root root 4096 Mar 13 06:16 in0_input
-rw-r--r-- 1 root root 4096 Mar 13 06:16 in0_max
-rw-r--r-- 1 root root 4096 Mar 13 06:16 in0_min
-r--r--r-- 1 root root 4096 Mar 13 06:16 in1_alarm
-r--r--r-- 1 root root 4096 Mar 13 06:16 in1_beep
-r--r--r-- 1 root root 4096 Mar 13 06:16 in1_input
-rw-r--r-- 1 root root 4096 Mar 13 06:16 in1_max
-rw-r--r-- 1 root root 4096 Mar 13 06:16 in1_min
-r--r--r-- 1 root root 4096 Mar 13 06:16 in2_alarm
-r--r--r-- 1 root root 4096 Mar 13 06:16 in2_beep
-r--r--r-- 1 root root 4096 Mar 13 06:16 in2_input
-rw-r--r-- 1 root root 4096 Mar 13 06:16 in2_max
-rw-r--r-- 1 root root 4096 Mar 13 06:16 in2_min
-r--r--r-- 1 root root 4096 Mar 13 06:16 in3_alarm
-r--r--r-- 1 root root 4096 Mar 13 06:16 in3_beep
-r--r--r-- 1 root root 4096 Mar 13 06:16 in3_input
-rw-r--r-- 1 root root 4096 Mar 13 06:16 in3_max
-rw-r--r-- 1 root root 4096 Mar 13 06:16 in3_min
-r--r--r-- 1 root root 4096 Mar 13 06:16 in4_alarm
-r--r--r-- 1 root root 4096 Mar 13 06:16 in4_beep
-r--r--r-- 1 root root 4096 Mar 13 06:16 in4_input
-rw-r--r-- 1 root root 4096 Mar 13 06:16 in4_max
-rw-r--r-- 1 root root 4096 Mar 13 06:16 in4_min
-r--r--r-- 1 root root 4096 Mar 13 06:16 in5_alarm
-r--r--r-- 1 root root 4096 Mar 13 06:16 in5_beep
-r--r--r-- 1 root root 4096 Mar 13 06:16 in5_input
-rw-r--r-- 1 root root 4096 Mar 13 06:16 in5_max
-rw-r--r-- 1 root root 4096 Mar 13 06:16 in5_min
-r--r--r-- 1 root root 4096 Mar 13 06:16 in6_alarm
-r--r--r-- 1 root root 4096 Mar 13 06:16 in6_beep
-r--r--r-- 1 root root 4096 Mar 13 06:16 in6_input
-rw-r--r-- 1 root root 4096 Mar 13 06:16 in6_max
-rw-r--r-- 1 root root 4096 Mar 13 06:16 in6_min
-r--r--r-- 1 root root 4096 Mar 13 06:16 in7_alarm
-r--r--r-- 1 root root 4096 Mar 13 06:16 in7_beep
-r--r--r-- 1 root root 4096 Mar 13 06:16 in7_input
-r--r--r-- 1 root root 4096 Mar 13 06:16 in7_label
-rw-r--r-- 1 root root 4096 Mar 13 06:16 in7_max
-rw-r--r-- 1 root root 4096 Mar 13 06:16 in7_min
-r--r--r-- 1 root root 4096 Mar 13 06:16 in8_input
-r--r--r-- 1 root root 4096 Mar 13 06:16 in8_label
-rw-r--r-- 1 root root 4096 Mar 13 06:16 intrusion0_alarm
-r--r--r-- 1 root root 4096 Mar 13 06:16 modalias
-r--r--r-- 1 root root 4096 Mar 11 19:26 name
drwxr-xr-x 2 root root 0 Mar 13 06:16 power
-rw-r--r-- 1 root root 4096 Mar 13 06:16 pwm1
-rw-r--r-- 1 root root 4096 Mar 13 06:16 pwm1_auto_channels_temp
-rw-r--r-- 1 root root 4096 Mar 13 06:16 pwm1_enable
-rw-r--r-- 1 root root 4096 Mar 13 06:16 pwm1_freq
-rw-r--r-- 1 root root 4096 Mar 13 06:16 pwm2
-rw-r--r-- 1 root root 4096 Mar 13 06:16 pwm2_auto_channels_temp
-rw-r--r-- 1 root root 4096 Mar 13 06:16 pwm2_enable
-r--r--r-- 1 root root 4096 Mar 13 06:16 pwm2_freq
-rw-r--r-- 1 root root 4096 Mar 13 06:16 pwm3
-rw-r--r-- 1 root root 4096 Mar 13 06:16 pwm3_auto_channels_temp
-rw-r--r-- 1 root root 4096 Mar 13 06:16 pwm3_enable
-r--r--r-- 1 root root 4096 Mar 13 06:16 pwm3_freq
lrwxrwxrwx 1 root root 0 Mar 11 19:25 subsystem -> ../../../bus/platform
-r--r--r-- 1 root root 4096 Mar 13 06:16 temp1_alarm
-rw-r--r-- 1 root root 4096 Mar 13 06:16 temp1_beep
-r--r--r-- 1 root root 4096 Mar 11 19:26 temp1_input
-rw-r--r-- 1 root root 4096 Mar 13 06:16 temp1_max
-rw-r--r-- 1 root root 4096 Mar 13 06:16 temp1_min
-rw-r--r-- 1 root root 4096 Mar 13 06:16 temp1_offset
-rw-r--r-- 1 root root 4096 Mar 13 06:16 temp1_type
-r--r--r-- 1 root root 4096 Mar 13 06:16 temp2_alarm
-r--r--r-- 1 root root 4096 Mar 13 06:16 temp2_beep
-r--r--r-- 1 root root 4096 Mar 11 19:26 temp2_input
-rw-r--r-- 1 root root 4096 Mar 13 06:16 temp2_max
-rw-r--r-- 1 root root 4096 Mar 13 06:16 temp2_min
-rw-r--r-- 1 root root 4096 Mar 13 06:16 temp2_offset
-rw-r--r-- 1 root root 4096 Mar 13 06:16 temp2_type
-r--r--r-- 1 root root 4096 Mar 13 06:16 temp3_alarm
-r--r--r-- 1 root root 4096 Mar 13 06:16 temp3_beep
-r--r--r-- 1 root root 4096 Mar 11 19:26 temp3_input
-rw-r--r-- 1 root root 4096 Mar 13 06:16 temp3_max
-rw-r--r-- 1 root root 4096 Mar 13 06:16 temp3_min
-rw-r--r-- 1 root root 4096 Mar 13 06:16 temp3_offset
-rw-r--r-- 1 root root 4096 Mar 13 06:16 temp3_type
-rw-r--r-- 1 root root 4096 Mar 11 19:25 uevent
root@fireball / #
I've used the kernel drivers for ages and have had no issues with it so
I keep using it. I get all the fans speeds, temps and such that I have
sensors for. If I enable the setting in my BIOS, I can even alter the
way the fans are temp controlled. Since the mobo does such a good job
on that, I never had the reason to use that.
Dale
:-) :-)
[-- Attachment #2: Type: text/html, Size: 11610 bytes --]
next prev parent reply other threads:[~2015-03-13 11:23 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-26 18:53 [gentoo-user] heat codes James
2015-02-26 20:13 ` [gentoo-user] " James
2015-02-26 23:02 ` Volker Armin Hemmann
2015-02-27 1:23 ` James
2015-02-27 6:27 ` Volker Armin Hemmann
2015-02-28 11:33 ` Mick
2015-03-12 23:53 ` James
2015-03-13 0:38 ` Dale
2015-03-13 6:20 ` Mick
2015-03-13 11:23 ` Dale [this message]
2015-03-13 9:13 ` Peter Humphrey
2015-03-13 11:27 ` Dale
2015-03-13 12:06 ` Peter Humphrey
2015-03-13 15:49 ` Dale
2015-03-13 16:10 ` Mick
2015-02-26 23:26 ` [gentoo-user] " Dale
2015-02-27 1:31 ` [gentoo-user] " James
2015-02-27 1:48 ` Dale
2015-02-27 5:40 ` Peter Humphrey
2015-02-27 8:27 ` Dale
2015-02-27 9:02 ` Neil Bothwick
2015-02-27 9:43 ` Peter Humphrey
2015-02-27 20:41 ` wabenbau
2015-02-28 9:48 ` Peter Humphrey
2015-03-12 19:40 ` Dale
2015-03-12 22:38 ` Peter Humphrey
2015-03-12 23:12 ` Neil Bothwick
2015-03-12 23:29 ` wabenbau
2015-03-12 23:35 ` Dale
2015-03-13 5:23 ` Tuomo Hartikainen
2015-03-13 11:31 ` Dale
2015-02-27 9:57 ` Dale
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5502C8A7.4000204@gmail.com \
--to=rdalek1967@gmail.com \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox