From: Dale <rdalek1967@gmail.com>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] making bootable USB
Date: Tue, 02 Sep 2014 01:23:45 -0500 [thread overview]
Message-ID: <54056271.7020704@gmail.com> (raw)
In-Reply-To: <20140902055515.GL15640@syscon7>
Joseph wrote:
>
> Yes, indeed I find it very strange as well.
> I just re-run the dd on my faster box.
>
> dd if=/home/joseph/Downloads/install-amd64-minimal-20140828.iso
> of=/dev/sdb bs=4096
> 48640+0 records in
> 48640+0 records out
> 199229440 bytes (199 MB) copied, 318.573 s, 625 kB/s
> sync
>
> fdisk -l /dev/sdb
>
> Disk /dev/sdb: 960 MiB, 1006632960 bytes, 1966080 sectors
> Units: sectors of 1 * 512 = 512 bytes
> Sector size (logical/physical): 512 bytes / 512 bytes
> I/O size (minimum/optimal): 512 bytes / 512 bytes
> Disklabel type: dos
> Disk identifier: 0x1047d058
>
> Device Boot Start End Blocks Id System
> /dev/sdb1 * 0 389119 194560 17 Hidden HPFS/NTFS
>
I don't know if it matters or not but on one of my sticks, I get this:
Device Boot Start End Blocks Id System
/dev/sde1 * 1 3915775 1957887+ c W95 FAT32 (LBA)
Mine is FAT32 where yours is NTFS. Could that difference cause this
problem?
Dale
:-) :-)
next prev parent reply other threads:[~2014-09-02 6:24 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-30 5:37 [gentoo-user] making bootable USB Joseph
2014-08-30 6:15 ` J. Roeleveld
2014-08-30 6:32 ` Joseph
2014-08-30 7:08 ` J. Roeleveld
2014-08-31 18:06 ` Joseph
2014-09-01 0:55 ` Will Tomlinson
2014-09-01 1:28 ` wraeth
2014-09-01 2:06 ` Joseph
2014-09-01 2:16 ` wraeth
2014-09-01 6:48 ` Joseph
2014-09-01 7:18 ` Alan McKinnon
2014-09-01 15:44 ` Joseph
2014-09-01 8:02 ` Peter Humphrey
2014-09-01 15:45 ` Joseph
2014-09-01 9:46 ` wraeth
2014-09-01 9:32 ` J. Roeleveld
2014-09-01 16:00 ` Joseph
2014-09-02 11:20 ` J. Roeleveld
2014-09-01 8:51 ` Neil Bothwick
2014-09-01 9:13 ` Mick
2014-09-01 10:12 ` Neil Bothwick
2014-09-01 9:42 ` wraeth
2014-09-01 9:58 ` Neil Bothwick
2014-09-01 16:29 ` Joseph
2014-09-01 16:38 ` Christopher Jones
2014-09-01 16:41 ` Christopher Jones
2014-09-01 19:12 ` Joseph
2014-09-01 20:05 ` Neil Bothwick
2014-09-01 18:53 ` Christian Kruse
2014-09-01 19:50 ` Will Tomlinson
2014-09-01 23:42 ` Joseph
2014-09-02 0:08 ` Neil Bothwick
2014-09-02 0:26 ` Joseph
2014-09-02 5:36 ` Mick
2014-09-02 5:55 ` Joseph
2014-09-02 6:23 ` Dale [this message]
2014-09-02 7:21 ` Christian Kruse
2014-09-02 7:35 ` Neil Bothwick
2014-09-02 8:00 ` Dale
2014-09-02 9:56 ` Mick
2014-09-02 10:16 ` Dale
2014-09-02 13:10 ` Joseph
2014-09-02 13:26 ` Neil Bothwick
2014-09-02 9:38 ` Alec Ten Harmsel
2014-09-02 13:38 ` thegeezer
2014-09-02 14:10 ` Joseph
2014-09-02 14:40 ` Peter Humphrey
2014-09-02 14:42 ` Neil Bothwick
2014-09-02 16:16 ` thegeezer
2014-09-02 22:32 ` Frank Steinmetzger
2014-09-02 14:46 ` Alan McKinnon
2014-09-02 16:50 ` Joseph
2014-09-02 17:21 ` Neil Bothwick
2014-09-02 18:12 ` Joseph
2014-09-02 21:09 ` Neil Bothwick
2014-09-02 18:17 ` J. Roeleveld
2014-09-02 21:55 ` Walter Dnes
2014-09-02 12:29 ` Matti Nykyri
2014-09-01 20:13 ` Neil Bothwick
2014-09-01 21:58 ` Alan McKinnon
2014-09-01 22:03 ` Neil Bothwick
2014-09-01 22:14 ` Mick
2014-09-02 22:27 ` Frank Steinmetzger
2014-09-02 22:43 ` Neil Bothwick
2014-09-02 22:49 ` Dale
2014-09-01 23:51 ` Joseph
2014-09-02 0:09 ` Neil Bothwick
2014-09-02 0:29 ` Joseph
2014-09-02 0:36 ` wraeth
2014-09-02 9:48 ` Christian Kruse
2014-09-01 20:05 ` Neil Bothwick
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54056271.7020704@gmail.com \
--to=rdalek1967@gmail.com \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox