Re: [gentoo-user] my gentoo cannot find my HD

[Xi Shen <davidshen84@googlemail.com>]

[-- Attachment #1: Type: text/plain, Size: 1465 bytes --]

hi,

i have attached my dmesg output, please help me review.

i have tried the kmuto.jp site, and i think i have all the modules
installed and loaded, but i still cannot see my HD on my laptop


On Fri, Sep 11, 2009 at 1:42 PM, Xi Shen <davidshen84@googlemail.com> wrote:
> of course i am using genkernel. i do not have access to my linux box
> now. i will post the output later.
>
>
> On Fri, Sep 11, 2009 at 8:39 AM, Jacob Todd <jaketodd422@gmail.com> wrote:
>> On Fri, Sep 11, 2009 at 11:57:51AM +0800, Xi Shen wrote:
>>> Hi,
>>>
>>> i installed my gentoo x64 on my usb HD, because i have to use windows
>>> for my work. but the problem is that if i boot from the usb HD, it
>>> cannot find the HD on my laptop. the gentoo 2008 installation cd works
>>> very well, so i think i must have missed some drivers in the kernel or
>>> module. i have included anything that is related to ide, scsi, sata,
>>> and usb. is there anything else i should do to make my HD on laptop
>>> work?
>>>
>>> my laptop is thinkpad t61.
>>>
>>>
>>> --
>>> Best Regards,
>>> David Shen
>>>
>>> http://twitter.com/davidshen84
>>>
>>
>> Do `lspci -n` and paste it's output at http://kmuto.jp/debian/hcl/.
>>
>> Also look at Pappy's kernel seeds.[1]
>>
>> [1]http://62.3.120.141/~pappy/
>>
>> --
>> Jake Todd
>> // If it isn't broke, tweak it!
>>
>
>
>
> --
> Best Regards,
> David Shen
>
> http://twitter.com/davidshen84
>



-- 
Best Regards,
David Shen

http://twitter.com/davidshen84

[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 30935 bytes --]

]    BIOS reserved ==> [000009d800 - 0000100000]
  #5 [0000763000 - 0000763194]              BRK ==> [0000763000 - 0000763194]
  #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
found SMP MP-table at [ffff8800000f68f0] f68f0
 [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009d
    0: 0x00000100 -> 0x0007eeb0
On node 0 totalpages: 519757
  DMA zone: 56 pages used for memmap
  DMA zone: 1481 pages reserved
  DMA zone: 2460 pages, LIFO batch:0
  DMA32 zone: 7052 pages used for memmap
  DMA32 zone: 508708 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
Allocating PCI resources starting at 80000000 (gap: 7f000000:71000000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 24 pages at ffff880001010000, static data 67232 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 511168
Kernel command line: root=/dev/ram0 real_root=UUID=75eb5837-c657-4a09-bfb5-3939a9dc6470 vga=365 video=vesafb:mtrr:3,ywrap
Initializing CPU#0
NR_IRQS:1280
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2494.029 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2032956k/2079424k available (3199k kernel code, 396k absent, 45440k reserved, 1235k data, 384k init)
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.05 BogoMIPS (lpj=24940290)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20090320
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     T9300  @ 2.50GHz stepping 06
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4987.48 BogoMIPS (lpj=24937435)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 Duo CPU     T9300  @ 2.50GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]:
Measured 413238 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
Brought up 2 CPUs
Total of 2 processors activated (9975.54 BogoMIPS).
net_namespace: 1776 bytes
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG at f0000000 - f3ffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: BIOS _OSI(Linux) query honored via DMI
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: Power Resource [PUBS] (on)
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:19.0: reg 10 32bit mmio: [0xfe200000-0xfe21ffff]
pci 0000:00:19.0: reg 14 32bit mmio: [0xfe225000-0xfe225fff]
pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe226c00-0xfe226fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe220000-0xfe223fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x18a0-0x18bf]
pci 0000:00:1d.1: reg 20 io port: [0x18c0-0x18df]
pci 0000:00:1d.2: reg 20 io port: [0x18e0-0x18ff]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe227000-0xfe2273ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x1830-0x183f]
pci 0000:00:1f.2: reg 10 io port: [0x1c48-0x1c4f]
pci 0000:00:1f.2: reg 14 io port: [0x1c1c-0x1c1f]
pci 0000:00:1f.2: reg 18 io port: [0x1c40-0x1c47]
pci 0000:00:1f.2: reg 1c io port: [0x1c18-0x1c1b]
pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe226000-0xfe2267ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe227400-0xfe2274ff]
pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xd6000000-0xd6ffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xd4000000-0xd5ffffff]
pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xd4000000-0xd6ffffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xfc000000-0xfdffffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8000000-0xf80fffff]
pci 0000:03:00.0: reg 10 32bit mmio: [0xdf2ff000-0xdf2fffff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xdc100000-0xdf2fffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0xdfd00000-0xdfdfffff]
pci 0000:00:1c.2: bridge io port: [0x5000-0x5fff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xd8000000-0xd9ffffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0xdfa00000-0xdfafffff]
pci 0000:00:1c.3: bridge io port: [0x6000-0x6fff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xd0000000-0xd1ffffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xdf700000-0xdf7fffff]
pci 0000:00:1c.4: bridge io port: [0x7000-0x7fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xcc000000-0xcdffffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xdf400000-0xdf4fffff]
pci 0000:15:00.0: reg 10 32bit mmio: [0xf8100000-0xf8100fff]
pci 0000:15:00.0: supports D1 D2
pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.0: PME# disabled
pci 0000:15:00.1: reg 10 32bit mmio: [0xf8101000-0xf81017ff]
pci 0000:15:00.1: supports D1 D2
pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.1: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x8000-0xbfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xf8100000-0xfbffffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf4000000-0xf7ffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff has been reserved
system 00:00: iomem range 0xc4000-0xc7fff has been reserved
system 00:00: iomem range 0xc8000-0xcbfff has been reserved
system 00:00: iomem range 0xcc000-0xcffff has been reserved
system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
system 00:00: iomem range 0xe8000-0xebfff could not be reserved
system 00:00: iomem range 0xec000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x7effffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
system 00:02: ioport range 0x164e-0x164f has been reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x165f could not be reserved
system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xf0000000-0xefffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x2000-0x2fff
pci 0000:00:01.0:   MEM window: 0xd4000000-0xd6ffffff
pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
pci 0000:00:1c.0:   MEM window: 0xfc000000-0xfdffffff
pci 0000:00:1c.0:   PREFETCH window: 0x000000f8000000-0x000000f80fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1:   IO window: 0x4000-0x4fff
pci 0000:00:1c.1:   MEM window: 0xdc100000-0xdf2fffff
pci 0000:00:1c.1:   PREFETCH window: 0x000000dfd00000-0x000000dfdfffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2:   IO window: 0x5000-0x5fff
pci 0000:00:1c.2:   MEM window: 0xd8000000-0xd9ffffff
pci 0000:00:1c.2:   PREFETCH window: 0x000000dfa00000-0x000000dfafffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.3:   IO window: 0x6000-0x6fff
pci 0000:00:1c.3:   MEM window: 0xd0000000-0xd1ffffff
pci 0000:00:1c.3:   PREFETCH window: 0x000000df700000-0x000000df7fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
pci 0000:00:1c.4:   IO window: 0x7000-0x7fff
pci 0000:00:1c.4:   MEM window: 0xcc000000-0xcdffffff
pci 0000:00:1c.4:   PREFETCH window: 0x000000df400000-0x000000df4fffff
pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
pci 0000:15:00.0:   IO window: 0x008000-0x0080ff
pci 0000:15:00.0:   IO window: 0x008400-0x0084ff
pci 0000:15:00.0:   PREFETCH window: 0xf4000000-0xf7ffffff
pci 0000:15:00.0:   MEM window: 0x80000000-0x83ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
pci 0000:00:1e.0:   IO window: 0x8000-0xbfff
pci 0000:00:1e.0:   MEM window: 0xf8100000-0xfbffffff
pci 0000:00:1e.0:   PREFETCH window: 0x000000f4000000-0x000000f7ffffff
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: enabling device (0005 -> 0007)
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0xd4000000-0xd6ffffff]
pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
pci_bus 0000:02: resource 1 mem: [0xfc000000-0xfdffffff]
pci_bus 0000:02: resource 2 pref mem [0xf8000000-0xf80fffff]
pci_bus 0000:03: resource 0 io:  [0x4000-0x4fff]
pci_bus 0000:03: resource 1 mem: [0xdc100000-0xdf2fffff]
pci_bus 0000:03: resource 2 pref mem [0xdfd00000-0xdfdfffff]
pci_bus 0000:04: resource 0 io:  [0x5000-0x5fff]
pci_bus 0000:04: resource 1 mem: [0xd8000000-0xd9ffffff]
pci_bus 0000:04: resource 2 pref mem [0xdfa00000-0xdfafffff]
pci_bus 0000:05: resource 0 io:  [0x6000-0x6fff]
pci_bus 0000:05: resource 1 mem: [0xd0000000-0xd1ffffff]
pci_bus 0000:05: resource 2 pref mem [0xdf700000-0xdf7fffff]
pci_bus 0000:0d: resource 0 io:  [0x7000-0x7fff]
pci_bus 0000:0d: resource 1 mem: [0xcc000000-0xcdffffff]
pci_bus 0000:0d: resource 2 pref mem [0xdf400000-0xdf4fffff]
pci_bus 0000:15: resource 0 io:  [0x8000-0xbfff]
pci_bus 0000:15: resource 1 mem: [0xf8100000-0xfbffffff]
pci_bus 0000:15: resource 2 pref mem [0xf4000000-0xf7ffffff]
pci_bus 0000:15: resource 3 io:  [0x00-0xffff]
pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:16: resource 0 io:  [0x8000-0x80ff]
pci_bus 0000:16: resource 1 io:  [0x8400-0x84ff]
pci_bus 0000:16: resource 2 pref mem [0xf4000000-0xf7ffffff]
pci_bus 0000:16: resource 3 mem: [0x80000000-0x83ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 7828k freed
Simple Boot Flag at 0x35 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1252693817.800:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 3987
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 28 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.4: irq 29 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
Linux agpgart interface v0.103
vesafb: framebuffer at 0xd5000000, mapped to 0xffffc20004100000, using 10125k, total 14336k
vesafb: mode is 1440x900x32, linelength=5760, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 180x56
fb0: VESA VGA frame buffer device
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
nbd: registered device at major 43
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
Linux video capture interface: v2.00
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
Freeing unused kernel memory: 384k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15
ata1.00: ATAPI: MATSHITADVD-RAM UJ-862, RB01, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-862   RB01 PQ: 0 ANSI: 5
ata2: port disabled. ignoring.
Driver 'sd' needs updating - please use bus_type methods
scsi 0:0:0:0: Attached scsi generic sg0 type 5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04791/0x300000
serio: Synaptics pass-through port at isa0060/serio1/input0
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
input: SynPS/2 Synaptics TouchPad as /class/input/input1
sl811: driver sl811-hcd, 19 May 2005
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb 3-2: new full speed USB device using uhci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input2
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
fuse init (API version 7.11)
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access              SAMSUNG MP0402H  YQ20 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] 78242976 512-byte hardware sectors: (40.0 GB/37.3 GiB)
sd 2:0:0:0: [sda] Test WP failed, assume Write Enabled
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] Test WP failed, assume Write Enabled
sd 2:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
EXT3-fs: sda2: couldn't mount because of unsupported optional features (240).
EXT2-fs: sda2: couldn't mount because of unsupported optional features (240).
EXT4-fs: barriers enabled
kjournald2 starting: pid 2525, dev sda2:8, commit interval 5 seconds
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda2 with ordered data mode
udev: starting version 141
udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
Non-volatile memory driver v1.3
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /class/input/input3
ACPI: Power Button [PWRF]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
input: Sleep Button as /class/input/input5
ACPI: Sleep Button [SLPB]
ACPI: Battery Slot [BAT0] (battery present)
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (54 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (50 C)
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:37:d2:2b:da
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: 1008ff-0ff
udev: renamed network interface eth0 to eth1
ACPI: SSDT 000000007eee1b32 00306 (v01  PmRef  Cpu0Ist 00000100 INTL 20050513)
ACPI: SSDT 000000007eee1ebd 0085E (v01  PmRef  Cpu0Cst 00000100 INTL 20050513)
ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 000000007eee1a6a 000C8 (v01  PmRef  Cpu1Ist 00000100 INTL 20050513)
ACPI: SSDT 000000007eee1e38 00085 (v01  PmRef  Cpu1Cst 00000100 INTL 20050513)
ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
cfg80211: Calling CRDA to update world regulatory domain
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x04b8, PCI irq 16
yenta_cardbus 0000:15:00.0: Socket status: 30000006
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
Clocksource tsc unstable (delta = -170400201 ns)
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
hda_intel: probe_mask set to 0x1 for device 17aa:20ac
HDA Intel 0000:00:1b.0: setting latency timer to 64
acpi device:08: registered as cooling_device2
input: Video Bus as /class/input/input6
ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  180.60  Mon May 11 15:27:42 PDT 2009
thinkpad_acpi: ThinkPad ACPI Extras v0.23
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7LETC6WW (2.26 ), EC 7KHT24WW-1.08
thinkpad_acpi: Lenovo ThinkPad T61, model 7662CTO
thinkpad_acpi: ACPI backlight control delay disabled
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
input: ThinkPad Extra Buttons as /class/input/input7
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
iwl3945: Copyright(c) 2003-2009 Intel Corporation
iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:03:00.0: setting latency timer to 64
iwl3945 0000:03:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:03:00.0: irq 31 for MSI/MSI-X
phy0: Selected rate control algorithm 'iwl-3945-rs'
EXT4 FS on sda2, internal journal on sda2:8
dca service started, version 1.8
Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2
Copyright (c) 2007-2009 Intel Corporation.
e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:00:19.0: eth1: 10/100 speed: disabling TSO
IRQ 16/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth1: no IPv6 routers present