public inbox for gentoo-user@lists.gentoo.org
 help / color / mirror / Atom feed
From: Volker Armin Hemmann <volkerarmin@googlemail.com>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] [OT] Badblocks on my harddisk
Date: Sat, 26 Jul 2014 14:06:02 +0200	[thread overview]
Message-ID: <53D399AA.8050908@googlemail.com> (raw)
In-Reply-To: <20140726102654.GD3835@solfire>

Am 26.07.2014 12:26, schrieb meino.cramer@gmx.de:
> Mick <michaelkintzios@gmail.com> [14-07-26 11:28]:
>> On Saturday 26 Jul 2014 02:49:15 meino.cramer@gmx.de wrote:
>>> Hi,
>>>
>>> After running smartctl for an extended offline test I got
>>> a badblock (information extracted from the report):
>>>
>>> SMART Self-test log structure revision number 1
>>> Num  Test_Description    Status                  Remaining  LifeTime(hours)
>>>  LBA_of_first_error # 1  Extended offline    Completed: read failure      
>>> 90%     14460         4288352511 197 Current_Pending_Sector  0x0032   200 
>>>  200   000    Old_age   Always       -       1
>>>
>>> I found a explanation to map the LBA to a partition here:
>>> http://smartmontools.sourceforge.net/badblockhowto.html
>>>
>>> My partition layout is:
>>> #> sudo fdisk -lu /dev/sda
>>>
>>> Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
>>> Units: sectors of 1 * 512 = 512 bytes
>>> Sector size (logical/physical): 512 bytes / 512 bytes
>>> I/O size (minimum/optimal): 512 bytes / 512 bytes
>>> Disklabel type: dos
>>> Disk identifier: 0x07ec16a2
>>>
>>> Device     Boot      Start        End    Blocks  Id System
>>> /dev/sda1  *          2048     104447     51200  83 Linux
>>> /dev/sda2           104448   12687359   6291456  82 Linux swap / Solaris
>>> /dev/sda3         12687360  222402559 104857600  83 Linux
>>> /dev/sda4        222402560 1953525167 865561304   5 Extended
>>> /dev/sda5        222404608  232890367   5242880  83 Linux
>>> /dev/sda6        232892416  442607615 104857600  83 Linux
>>> /dev/sda7        442609664  652324863 104857600  83 Linux
>>> /dev/sda8        652326912  862042111 104857600  83 Linux
>>> /dev/sda9        862044160 1071759359 104857600  83 Linux
>>> /dev/sda10      1071761408 1281476607 104857600  83 Linux
>>> /dev/sda11      1281478656 1491193855 104857600  83 Linux
>>> /dev/sda12      1491195904 1953525167 231164632  83 Linux
>>>                 4288352511  <<< The number reported by smartctl
>>>
>>>
>>> Following the linked document...
>>> It seems the bad LBA is not on the checked harddisk.
>>>
>>> Or (more obvious) I did something wrong...
>> You are probably comparing different units.  The Start and End of fdisk are 
>> reporting sectors, each sector being 512 bytes.  Therefore if the LBA is 
>> reported by smartctl in bytes, you have:
>>
>> 4,288,352,511 ÷ 512 = 8,375,688.5
>>
>> which would place it within your swap partition.
>>
>> I would do this:
>>
>>  swapoff /dev/sda2
>>
>>  dd if=/dev/zero of=/dev/sda2 bs=512 conv=notrunc
>>
>>  mkswap -L swap -c /dev/sda2
>>
>>  swapon /dev/sda2
>>
>> and hopefully the problem will be gone when you run the next smartctl test.
>>
>> -- 
>> Regards,
>> Mick
>
> Sorry for stuutering postings...overlocked this one:
> #>dd if=/dev/zero of=/dev/sda2 bs=512 conv=notrunc
> dd: error writing ‘/dev/sda2’: Input/output error
>
> Hrrrmpfff...
>
> Why does it nt remap those ones?
>
> Best regards,
> mcc
>
>
>
>
>
>
>
smartctl -a /dev/sda

without those information: crystal ball.

that said: it is swap. You shouldn't have to do anything. Don't touch dd.




  reply	other threads:[~2014-07-26 12:06 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-26  1:49 [gentoo-user] [OT] Badblocks on my harddisk meino.cramer
2014-07-26  3:39 ` Dale
2014-07-26  8:13   ` meino.cramer
2014-07-31 16:58     ` Frank Steinmetzger
2014-08-01 22:12       ` Stroller
2014-07-26  9:25 ` Mick
2014-07-26 10:11   ` meino.cramer
2014-07-26 10:23   ` meino.cramer
2014-07-26 10:26   ` meino.cramer
2014-07-26 12:06     ` Volker Armin Hemmann [this message]
2014-07-26 12:16       ` meino.cramer
2014-07-26 15:56         ` Volker Armin Hemmann
2014-07-26 16:09           ` meino.cramer
2014-07-26 17:18             ` Volker Armin Hemmann
2014-07-26 15:36       ` meino.cramer
2014-07-26 12:27     ` Mick
2014-07-26 12:04 ` Volker Armin Hemmann
2014-07-26 12:11   ` Dale

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53D399AA.8050908@googlemail.com \
    --to=volkerarmin@googlemail.com \
    --cc=gentoo-user@lists.gentoo.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox