From: Dale <rdalek1967@gmail.com>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Re: smartctrl drive error @60%
Date: Sat, 28 Jun 2014 09:15:47 -0500 [thread overview]
Message-ID: <53AECE13.1020006@gmail.com> (raw)
In-Reply-To: <53AEC9FA.7070404@gmail.com>
Dale wrote:
> Alan McKinnon wrote:
>> On 28/06/2014 15:05, Dale wrote:
>>> On this old drive. I got my data copied over and tested the stuffin out
>>> of the new drive and then tested it a few more times. Looks good for
>>> the new drive. I'm doing a dd on the old drive now and I plan to let it
>>> at least get to where that bad spot is. I figure if I let dd do its
>>> thing on the whole drive, that should get it, unless I lose power or
>>> something and have to stop it. After that, I'm going to put a file
>>> system on it and fill it up and test it and see what it says then.
>>> Maybe it will fix itself and I can at least use it as a occasional
>>> backup or something. I dunno.
>>>
>>> I noticed when I copied the data over that some files had a line of
>>> question marks in the name. Since a question mark is a wild card, I
>>> can't find them now. How does one search for a file name that has a
>>> wild card in it?
>> escape the character with a \
>>
>> But that's not your main problem. You got those filenames because the
>> source disk somehow has a problem and the names couldn't be read
>> properly. So junk was used instead.
>>
>> Reasons vary, but the basics never change: there is a problem with your
>> source disk and now you need to go find what that problem is.
>>
> Well, the drive is replaced but it copied the "bad" file over as well.
> I just want to find it so that I can check it and delete it if it is
> bad. It's one of my videos so no point in some corrupted file hanging
> around if it is no good. Plus, I hope I can figure out what is missing
> and find a copy on youtube or something. Maybe I will be that lucky.
>
> Now to go see if I can find it again. ;-)
>
> Thanks.
>
> Dale
>
> :-) :-)
>
Hmmmmm, slight glitch maybe. It listed some files with a question mark
in it but not the ones I am looking for. So, is it possible that since
it couldn't read the file it just skipped them? I used rsync to do the
copy instead of cp. Maybe that is it or otherwise, I have a ton of
directories to go diggin in to find them since it isn't the one I
thought it was.
Dale
:-) :-)
next prev parent reply other threads:[~2014-06-28 14:15 UTC|newest]
Thread overview: 116+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-24 23:09 [gentoo-user] smartctrl drive error @60% Dale
2014-06-25 4:20 ` J. Roeleveld
2014-06-25 5:05 ` Dale
2014-06-25 7:26 ` J. Roeleveld
2014-06-25 7:43 ` Dale
2014-06-25 7:41 ` thegeezer
2014-06-25 7:49 ` Dale
2014-06-25 10:42 ` thegeezer
2014-06-25 13:15 ` Dale
2014-06-25 14:03 ` Rich Freeman
2014-06-25 15:54 ` Dale
2014-06-25 16:09 ` Neil Bothwick
2014-06-25 16:44 ` Mick
2014-06-25 17:29 ` Neil Bothwick
2014-06-25 22:16 ` Dale
2014-06-25 22:32 ` Rich Freeman
2014-06-26 2:07 ` Dale
2014-06-26 2:15 ` Rich Freeman
2014-06-26 4:57 ` Dale
2014-06-29 15:17 ` Frank Steinmetzger
2014-07-01 8:30 ` Dale
2014-07-01 8:46 ` Helmut Jarausch
2014-07-01 8:58 ` Dale
2014-07-01 9:06 ` Helmut Jarausch
2014-07-01 9:11 ` J. Roeleveld
2014-07-01 9:21 ` Dale
2014-07-01 10:19 ` J. Roeleveld
2014-07-01 12:36 ` Dale
2014-07-01 8:49 ` J. Roeleveld
2014-06-25 22:50 ` Neil Bothwick
2014-06-26 2:15 ` Dale
2014-06-26 5:56 ` Mick
2014-06-26 5:59 ` Mick
2014-06-26 14:14 ` Dale
2014-06-26 15:08 ` Neil Bothwick
2014-06-26 15:31 ` Dale
2014-06-27 13:22 ` Mick
2014-06-27 20:54 ` Neil Bothwick
2014-06-27 21:26 ` [gentoo-user] " Grant Edwards
2014-06-27 21:41 ` Rich Freeman
2014-06-28 7:48 ` [gentoo-user] " Mick
2014-06-28 8:37 ` Neil Bothwick
2014-06-28 11:54 ` Dale
2014-06-26 7:22 ` [gentoo-user] " Alberto Luaces
2014-06-26 10:11 ` [gentoo-user] " Neil Bothwick
2014-06-26 11:03 ` Dale
2014-06-26 11:24 ` Rich Freeman
2014-06-26 11:40 ` Dale
2014-06-26 0:38 ` Bill Kenworthy
2014-06-26 2:31 ` Dale
2014-06-26 17:39 ` [gentoo-user] " Grant Edwards
2014-06-28 11:55 ` Dale
2014-06-28 12:40 ` Neil Bothwick
2014-06-28 13:05 ` Dale
2014-06-28 13:08 ` Alan McKinnon
2014-06-28 13:58 ` Dale
2014-06-28 14:15 ` Dale [this message]
2014-06-28 14:50 ` Peter Humphrey
2014-06-28 16:00 ` Mick
2014-06-28 17:30 ` Dale
2014-06-25 16:38 ` [gentoo-user] " Rich Freeman
2014-06-26 2:13 ` Dale
2014-06-25 18:44 ` Douglas J Hunley
2014-06-25 18:50 ` Rich Freeman
2014-06-26 16:05 ` Dale
2014-06-26 0:00 ` David Haller
2014-06-26 2:40 ` Dale
2014-06-26 6:05 ` David Haller
2014-06-26 16:19 ` [gentoo-user] OT: power requirement (WAS: smartctrl drive error @60%) Frank Steinmetzger
2014-06-26 17:05 ` Daniel Frey
2014-06-26 23:01 ` Bill Kenworthy
2014-06-26 17:31 ` Dale
2014-06-25 16:55 ` [gentoo-user] smartctrl drive error @60% Volker Armin Hemmann
2014-06-25 17:06 ` Rich Freeman
2014-06-25 17:15 ` Volker Armin Hemmann
2014-06-25 17:44 ` Rich Freeman
2014-06-25 21:19 ` J. Roeleveld
2014-06-26 3:45 ` Dale
2014-06-26 1:16 ` Daniel Frey
2014-06-26 3:54 ` Dale
2014-06-26 10:05 ` Neil Bothwick
2014-06-26 10:54 ` Dale
2014-06-26 10:52 ` Alan McKinnon
2014-06-26 11:20 ` Dale
2014-06-26 12:57 ` Alan McKinnon
2014-06-26 13:58 ` Dale
2014-06-26 17:14 ` Daniel Frey
2014-06-26 17:21 ` Daniel Frey
2014-06-25 21:11 ` Dale
2014-06-25 9:46 ` Neil Bothwick
2014-06-25 10:05 ` Dale
2014-06-25 10:55 ` thegeezer
2014-06-25 11:02 ` Helmut Jarausch
2014-06-25 13:21 ` covici
2014-06-25 12:33 ` Rich Freeman
2014-06-25 14:23 ` Neil Bothwick
2014-06-25 14:29 ` Rich Freeman
2014-06-25 16:00 ` Dale
2014-06-25 15:30 ` covici
2014-06-25 16:34 ` Rich Freeman
2014-06-25 17:58 ` Alan McKinnon
2014-06-25 12:30 ` Dale
2014-06-25 7:35 ` Marc Joliet
2014-06-29 3:27 ` Dale
2014-06-29 3:34 ` Rich Freeman
2014-06-29 4:44 ` Dale
2014-06-29 7:38 ` Mick
2014-06-29 8:42 ` Dale
2014-06-29 9:40 ` Mick
2014-06-29 12:05 ` Rich Freeman
2014-06-29 12:30 ` Dale
2014-07-01 5:52 ` Mick
2014-07-01 6:09 ` J. Roeleveld
2014-07-01 7:21 ` Dale
2014-07-01 10:48 ` Rich Freeman
2014-07-01 10:55 ` Alan McKinnon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53AECE13.1020006@gmail.com \
--to=rdalek1967@gmail.com \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox