From: Dale <rdalek1967@gmail.com>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] smartctrl drive error @60%
Date: Wed, 25 Jun 2014 21:13:14 -0500 [thread overview]
Message-ID: <53AB81BA.8030207@gmail.com> (raw)
In-Reply-To: <CAGfcS_=_=q+U8VJZKoCgNccpWwL12Shpqc++OebhVBm5Urj8eQ@mail.gmail.com>
Rich Freeman wrote:
> On Wed, Jun 25, 2014 at 11:54 AM, Dale <rdalek1967@gmail.com> wrote:
>> I'm going to bet this drive is out of warranty. I'm pretty sure it is
>> over 2 years since I bought it.
>>
>> Once I replace that drive, I'll dd the thing and see what it does then.
>> It'll either break it or give me a fresh start to play with and see how
>> long it lasts.
> Well, finding out for sure is a 30 second process, so up to you
> whether it is worth the time.
>
> smartctl will give you the serial/model number, and you punch that
> into a website, and it will say whether it is under warranty or not.
>
> If you plan to wipe the disk before return, print out the results of
> smartctl -a first, since wiping will probably clear the pending
> sectors.
>
> But, it is your drive, so do whatever you want with it! :)
>
> Rich
>
>
I do plan to check and see if it is under warranty. I'll do that after
I get things moved over and can test a bit more. Who knows, it could be
Murphy and he will just leave at some point. ;-) I'm pretty sure this
drive is close to three years old tho. Heck, I can go look at the
Newegg order history and find out. I would think the manufacturer goes
by the date made where a invoice dated later would tend to slide that
out further.
Either way, I'll find out. If it is under warranty and can be swapped
out, that would solve a few issues. I'll have one backup drive at
least. ;-)
Dale
:-) :-)
next prev parent reply other threads:[~2014-06-26 2:13 UTC|newest]
Thread overview: 116+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-24 23:09 [gentoo-user] smartctrl drive error @60% Dale
2014-06-25 4:20 ` J. Roeleveld
2014-06-25 5:05 ` Dale
2014-06-25 7:26 ` J. Roeleveld
2014-06-25 7:43 ` Dale
2014-06-25 7:41 ` thegeezer
2014-06-25 7:49 ` Dale
2014-06-25 10:42 ` thegeezer
2014-06-25 13:15 ` Dale
2014-06-25 14:03 ` Rich Freeman
2014-06-25 15:54 ` Dale
2014-06-25 16:09 ` Neil Bothwick
2014-06-25 16:44 ` Mick
2014-06-25 17:29 ` Neil Bothwick
2014-06-25 22:16 ` Dale
2014-06-25 22:32 ` Rich Freeman
2014-06-26 2:07 ` Dale
2014-06-26 2:15 ` Rich Freeman
2014-06-26 4:57 ` Dale
2014-06-29 15:17 ` Frank Steinmetzger
2014-07-01 8:30 ` Dale
2014-07-01 8:46 ` Helmut Jarausch
2014-07-01 8:58 ` Dale
2014-07-01 9:06 ` Helmut Jarausch
2014-07-01 9:11 ` J. Roeleveld
2014-07-01 9:21 ` Dale
2014-07-01 10:19 ` J. Roeleveld
2014-07-01 12:36 ` Dale
2014-07-01 8:49 ` J. Roeleveld
2014-06-25 22:50 ` Neil Bothwick
2014-06-26 2:15 ` Dale
2014-06-26 5:56 ` Mick
2014-06-26 5:59 ` Mick
2014-06-26 14:14 ` Dale
2014-06-26 15:08 ` Neil Bothwick
2014-06-26 15:31 ` Dale
2014-06-27 13:22 ` Mick
2014-06-27 20:54 ` Neil Bothwick
2014-06-27 21:26 ` [gentoo-user] " Grant Edwards
2014-06-27 21:41 ` Rich Freeman
2014-06-28 7:48 ` [gentoo-user] " Mick
2014-06-28 8:37 ` Neil Bothwick
2014-06-28 11:54 ` Dale
2014-06-26 7:22 ` [gentoo-user] " Alberto Luaces
2014-06-26 10:11 ` [gentoo-user] " Neil Bothwick
2014-06-26 11:03 ` Dale
2014-06-26 11:24 ` Rich Freeman
2014-06-26 11:40 ` Dale
2014-06-26 0:38 ` Bill Kenworthy
2014-06-26 2:31 ` Dale
2014-06-26 17:39 ` [gentoo-user] " Grant Edwards
2014-06-28 11:55 ` Dale
2014-06-28 12:40 ` Neil Bothwick
2014-06-28 13:05 ` Dale
2014-06-28 13:08 ` Alan McKinnon
2014-06-28 13:58 ` Dale
2014-06-28 14:15 ` Dale
2014-06-28 14:50 ` Peter Humphrey
2014-06-28 16:00 ` Mick
2014-06-28 17:30 ` Dale
2014-06-25 16:38 ` [gentoo-user] " Rich Freeman
2014-06-26 2:13 ` Dale [this message]
2014-06-25 18:44 ` Douglas J Hunley
2014-06-25 18:50 ` Rich Freeman
2014-06-26 16:05 ` Dale
2014-06-26 0:00 ` David Haller
2014-06-26 2:40 ` Dale
2014-06-26 6:05 ` David Haller
2014-06-26 16:19 ` [gentoo-user] OT: power requirement (WAS: smartctrl drive error @60%) Frank Steinmetzger
2014-06-26 17:05 ` Daniel Frey
2014-06-26 23:01 ` Bill Kenworthy
2014-06-26 17:31 ` Dale
2014-06-25 16:55 ` [gentoo-user] smartctrl drive error @60% Volker Armin Hemmann
2014-06-25 17:06 ` Rich Freeman
2014-06-25 17:15 ` Volker Armin Hemmann
2014-06-25 17:44 ` Rich Freeman
2014-06-25 21:19 ` J. Roeleveld
2014-06-26 3:45 ` Dale
2014-06-26 1:16 ` Daniel Frey
2014-06-26 3:54 ` Dale
2014-06-26 10:05 ` Neil Bothwick
2014-06-26 10:54 ` Dale
2014-06-26 10:52 ` Alan McKinnon
2014-06-26 11:20 ` Dale
2014-06-26 12:57 ` Alan McKinnon
2014-06-26 13:58 ` Dale
2014-06-26 17:14 ` Daniel Frey
2014-06-26 17:21 ` Daniel Frey
2014-06-25 21:11 ` Dale
2014-06-25 9:46 ` Neil Bothwick
2014-06-25 10:05 ` Dale
2014-06-25 10:55 ` thegeezer
2014-06-25 11:02 ` Helmut Jarausch
2014-06-25 13:21 ` covici
2014-06-25 12:33 ` Rich Freeman
2014-06-25 14:23 ` Neil Bothwick
2014-06-25 14:29 ` Rich Freeman
2014-06-25 16:00 ` Dale
2014-06-25 15:30 ` covici
2014-06-25 16:34 ` Rich Freeman
2014-06-25 17:58 ` Alan McKinnon
2014-06-25 12:30 ` Dale
2014-06-25 7:35 ` Marc Joliet
2014-06-29 3:27 ` Dale
2014-06-29 3:34 ` Rich Freeman
2014-06-29 4:44 ` Dale
2014-06-29 7:38 ` Mick
2014-06-29 8:42 ` Dale
2014-06-29 9:40 ` Mick
2014-06-29 12:05 ` Rich Freeman
2014-06-29 12:30 ` Dale
2014-07-01 5:52 ` Mick
2014-07-01 6:09 ` J. Roeleveld
2014-07-01 7:21 ` Dale
2014-07-01 10:48 ` Rich Freeman
2014-07-01 10:55 ` Alan McKinnon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53AB81BA.8030207@gmail.com \
--to=rdalek1967@gmail.com \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox