From: Volker Armin Hemmann <volkerarmin@googlemail.com>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] smartctrl drive error @60%
Date: Wed, 25 Jun 2014 19:15:47 +0200 [thread overview]
Message-ID: <53AB03C3.9000601@googlemail.com> (raw)
In-Reply-To: <CAGfcS_=ORtsG5AtLXijEuz9NwNupJdsJgs7eYbM15UHyO=4N4g@mail.gmail.com>
Am 25.06.2014 19:06, schrieb Rich Freeman:
> On Wed, Jun 25, 2014 at 12:55 PM, Volker Armin Hemmann
> <volkerarmin@googlemail.com> wrote:
>> so without looking that drive up - you are using a desktop part for
>> non-stop setup?
> Honestly, I think it makes far more sense to build a fault-tolerant
> setup than to try to avoid faults by spending more on the parts. I've
> only run desktop hard drives on my 24x7 RAID. If they die I replace
> them under warranty
so you are ripping of other customers?
> - I've yet to have one die outside of warranty,
> and I'm usually upgrading for size by that timeframe anyway, and I can
> use the old drives for storage.
>
> By all means get better-grade components, but I wouldn't use that as
> an excuse for not having backups of some kind.
there is no excuse for not having backups.
> ALL hard drives WILL
> fail, it is just a matter of when.
indeed.
> ANY hard drive can fail the day
> after you buy it, a month after you buy it, and so on, though
> obviously the probability of a particular drive failing at any point
> in time may vary by what you pay for it.
or if it was meant to be used the way you use it.
next prev parent reply other threads:[~2014-06-25 17:16 UTC|newest]
Thread overview: 116+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-24 23:09 [gentoo-user] smartctrl drive error @60% Dale
2014-06-25 4:20 ` J. Roeleveld
2014-06-25 5:05 ` Dale
2014-06-25 7:26 ` J. Roeleveld
2014-06-25 7:43 ` Dale
2014-06-25 7:41 ` thegeezer
2014-06-25 7:49 ` Dale
2014-06-25 10:42 ` thegeezer
2014-06-25 13:15 ` Dale
2014-06-25 14:03 ` Rich Freeman
2014-06-25 15:54 ` Dale
2014-06-25 16:09 ` Neil Bothwick
2014-06-25 16:44 ` Mick
2014-06-25 17:29 ` Neil Bothwick
2014-06-25 22:16 ` Dale
2014-06-25 22:32 ` Rich Freeman
2014-06-26 2:07 ` Dale
2014-06-26 2:15 ` Rich Freeman
2014-06-26 4:57 ` Dale
2014-06-29 15:17 ` Frank Steinmetzger
2014-07-01 8:30 ` Dale
2014-07-01 8:46 ` Helmut Jarausch
2014-07-01 8:58 ` Dale
2014-07-01 9:06 ` Helmut Jarausch
2014-07-01 9:11 ` J. Roeleveld
2014-07-01 9:21 ` Dale
2014-07-01 10:19 ` J. Roeleveld
2014-07-01 12:36 ` Dale
2014-07-01 8:49 ` J. Roeleveld
2014-06-25 22:50 ` Neil Bothwick
2014-06-26 2:15 ` Dale
2014-06-26 5:56 ` Mick
2014-06-26 5:59 ` Mick
2014-06-26 14:14 ` Dale
2014-06-26 15:08 ` Neil Bothwick
2014-06-26 15:31 ` Dale
2014-06-27 13:22 ` Mick
2014-06-27 20:54 ` Neil Bothwick
2014-06-27 21:26 ` [gentoo-user] " Grant Edwards
2014-06-27 21:41 ` Rich Freeman
2014-06-28 7:48 ` [gentoo-user] " Mick
2014-06-28 8:37 ` Neil Bothwick
2014-06-28 11:54 ` Dale
2014-06-26 7:22 ` [gentoo-user] " Alberto Luaces
2014-06-26 10:11 ` [gentoo-user] " Neil Bothwick
2014-06-26 11:03 ` Dale
2014-06-26 11:24 ` Rich Freeman
2014-06-26 11:40 ` Dale
2014-06-26 0:38 ` Bill Kenworthy
2014-06-26 2:31 ` Dale
2014-06-26 17:39 ` [gentoo-user] " Grant Edwards
2014-06-28 11:55 ` Dale
2014-06-28 12:40 ` Neil Bothwick
2014-06-28 13:05 ` Dale
2014-06-28 13:08 ` Alan McKinnon
2014-06-28 13:58 ` Dale
2014-06-28 14:15 ` Dale
2014-06-28 14:50 ` Peter Humphrey
2014-06-28 16:00 ` Mick
2014-06-28 17:30 ` Dale
2014-06-25 16:38 ` [gentoo-user] " Rich Freeman
2014-06-26 2:13 ` Dale
2014-06-25 18:44 ` Douglas J Hunley
2014-06-25 18:50 ` Rich Freeman
2014-06-26 16:05 ` Dale
2014-06-26 0:00 ` David Haller
2014-06-26 2:40 ` Dale
2014-06-26 6:05 ` David Haller
2014-06-26 16:19 ` [gentoo-user] OT: power requirement (WAS: smartctrl drive error @60%) Frank Steinmetzger
2014-06-26 17:05 ` Daniel Frey
2014-06-26 23:01 ` Bill Kenworthy
2014-06-26 17:31 ` Dale
2014-06-25 16:55 ` [gentoo-user] smartctrl drive error @60% Volker Armin Hemmann
2014-06-25 17:06 ` Rich Freeman
2014-06-25 17:15 ` Volker Armin Hemmann [this message]
2014-06-25 17:44 ` Rich Freeman
2014-06-25 21:19 ` J. Roeleveld
2014-06-26 3:45 ` Dale
2014-06-26 1:16 ` Daniel Frey
2014-06-26 3:54 ` Dale
2014-06-26 10:05 ` Neil Bothwick
2014-06-26 10:54 ` Dale
2014-06-26 10:52 ` Alan McKinnon
2014-06-26 11:20 ` Dale
2014-06-26 12:57 ` Alan McKinnon
2014-06-26 13:58 ` Dale
2014-06-26 17:14 ` Daniel Frey
2014-06-26 17:21 ` Daniel Frey
2014-06-25 21:11 ` Dale
2014-06-25 9:46 ` Neil Bothwick
2014-06-25 10:05 ` Dale
2014-06-25 10:55 ` thegeezer
2014-06-25 11:02 ` Helmut Jarausch
2014-06-25 13:21 ` covici
2014-06-25 12:33 ` Rich Freeman
2014-06-25 14:23 ` Neil Bothwick
2014-06-25 14:29 ` Rich Freeman
2014-06-25 16:00 ` Dale
2014-06-25 15:30 ` covici
2014-06-25 16:34 ` Rich Freeman
2014-06-25 17:58 ` Alan McKinnon
2014-06-25 12:30 ` Dale
2014-06-25 7:35 ` Marc Joliet
2014-06-29 3:27 ` Dale
2014-06-29 3:34 ` Rich Freeman
2014-06-29 4:44 ` Dale
2014-06-29 7:38 ` Mick
2014-06-29 8:42 ` Dale
2014-06-29 9:40 ` Mick
2014-06-29 12:05 ` Rich Freeman
2014-06-29 12:30 ` Dale
2014-07-01 5:52 ` Mick
2014-07-01 6:09 ` J. Roeleveld
2014-07-01 7:21 ` Dale
2014-07-01 10:48 ` Rich Freeman
2014-07-01 10:55 ` Alan McKinnon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53AB03C3.9000601@googlemail.com \
--to=volkerarmin@googlemail.com \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox