Re: [gentoo-user] smartctrl drive error @60%

[Dale <rdalek1967@gmail.com>]

thegeezer wrote:
> this is pretty bad. enough to really go and get a replacement asap,
> and turn that disk off if you can. the self test stops at the first
> error it comes to and in this case it is LBA#2905482560 for
> calculation of where the error is check out the smartcl [1] site which
> will help you to mark the block bad though the data that was in that
> block is probably lost forever. i'd also suggest you run # smartctl -a
> /dev/sdc and paste the results here. the crucial rows are 196/197 the
> reallocated sector counts and pending sector counts. they show how
> many blocks have been reallocated, and also how many are pending. this
> will give you a scaling factor, at the moment you are in trouble, if
> these figures are very high you are in very high trouble, if they are
> low you are in low trouble. [1]
> http://smartmontools.sourceforge.net/badblockhowto.html 

Here is the output:

root@fireball / # smartctl -a /dev/sdc
smartctl 6.1 2013-03-16 r3800 [x86_64-linux-3.14.0-gentoo] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST3000DM001-9YN166
Serial Number:    Z1F0PKT5
LU WWN Device Id: 5 000c50 04d79e15c
Firmware Version: CC4C
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Jun 25 02:46:39 2014 CDT

==> WARNING: A firmware update for this drive is available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection:
Disabled.
Self-test execution status:      ( 118) The previous self-test completed
having
                                        the read element of the test failed.
Total time to complete Offline
data collection:                (  584) seconds.
Offline data collection
capabilities:                    (0x73) SMART execute Offline immediate.
                                        Auto Offline data collection
on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 340) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x3085) SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE     
UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   119   099   006    Pre-fail 
Always       -       234421760
  3 Spin_Up_Time            0x0003   092   092   000    Pre-fail 
Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age  
Always       -       33
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail 
Always       -       0
  7 Seek_Error_Rate         0x000f   079   060   030    Pre-fail 
Always       -       99909120
  9 Power_On_Hours          0x0032   082   082   000    Old_age  
Always       -       16379
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail 
Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age  
Always       -       34
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age  
Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age  
Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age  
Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age  
Always       -       0 0 0
189 High_Fly_Writes         0x003a   100   100   000    Old_age  
Always       -       0
190 Airflow_Temperature_Cel 0x0022   069   063   045    Old_age  
Always       -       31 (Min/Max 26/33)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age  
Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age  
Always       -       9
193 Load_Cycle_Count        0x0032   093   093   000    Old_age  
Always       -       14284
194 Temperature_Celsius     0x0022   031   040   000    Old_age  
Always       -       31 (0 17 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age  
Always       -       104
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age  
Offline      -       104
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age  
Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age  
Offline      -       15955h+37m+28.932s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age  
Offline      -       52221690631887
242 Total_LBAs_Read         0x0000   100   253   000    Old_age  
Offline      -       74848968465606

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining 
LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: read failure       60%    
16365         2905482560
# 2  Extended offline    Completed: read failure       60%    
16352         2905482560
# 3  Extended offline    Completed without error       00%     
8044         -
# 4  Extended offline    Completed without error       00%     
3121         -
# 5  Extended offline    Completed without error       00%     
1548         -
# 6  Short offline       Completed without error       00%     
1141         -
# 7  Extended offline    Completed without error       00%      
719         -
# 8  Extended offline    Completed without error       00%      
525         -
# 9  Short offline       Completed without error       00%      
516         -
#10  Extended offline    Completed without error       00%       
18         -
#11  Extended offline    Completed without error       00%        
5         -
#12  Short offline       Completed without error       00%        
0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

root@fireball / #
 
Does that help shed any light on this situation?   If you need more
info, just let me know.  Off to newegg.  BRB 

Dale

:-)  :-) 

-- 
I am only responsible for what I said ... Not for what you understood or how you interpreted my words!