* [gentoo-user] Intel(R) C600 SAS Controller @ 2014-05-23 7:52 Stefan G. Weichinger 2014-05-24 19:24 ` Stefan G. Weichinger 0 siblings, 1 reply; 30+ messages in thread From: Stefan G. Weichinger @ 2014-05-23 7:52 UTC (permalink / raw To: gentoo-user Greetings, I have a new Fujitsu TX150 here, with a Intel(R) C600 SAS Controller and an LTO4 drive attached to it. My kernel has support for isci, scsi tape, ahci and all the sas stuff ... but I don't get any "st" devices. Do I need SCSI_PROC_FS set? I just wonder ... thanks, Stefan ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-05-23 7:52 [gentoo-user] Intel(R) C600 SAS Controller Stefan G. Weichinger @ 2014-05-24 19:24 ` Stefan G. Weichinger 2014-05-26 17:47 ` Stefan G. Weichinger 0 siblings, 1 reply; 30+ messages in thread From: Stefan G. Weichinger @ 2014-05-24 19:24 UTC (permalink / raw To: gentoo-user Am 23.05.2014 09:52, schrieb Stefan G. Weichinger: > > Greetings, > > I have a new Fujitsu TX150 here, with a > > Intel(R) C600 SAS Controller > > and an LTO4 drive attached to it. > > My kernel has support for isci, scsi tape, ahci and all the sas stuff > ... but I don't get any "st" devices. > > Do I need SCSI_PROC_FS set? I just wonder ... I still don't see that LTO drive. Anyone with access to this: https://access.redhat.com/site/solutions/262773 ? ;-) S ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-05-24 19:24 ` Stefan G. Weichinger @ 2014-05-26 17:47 ` Stefan G. Weichinger 2014-05-26 19:57 ` Stefan G. Weichinger 0 siblings, 1 reply; 30+ messages in thread From: Stefan G. Weichinger @ 2014-05-26 17:47 UTC (permalink / raw To: gentoo-user Am 24.05.2014 21:24, schrieb Stefan G. Weichinger: > Am 23.05.2014 09:52, schrieb Stefan G. Weichinger: >> >> Greetings, >> >> I have a new Fujitsu TX150 here, with a >> >> Intel(R) C600 SAS Controller >> >> and an LTO4 drive attached to it. >> >> My kernel has support for isci, scsi tape, ahci and all the sas stuff >> ... but I don't get any "st" devices. >> >> Do I need SCSI_PROC_FS set? I just wonder ... > > > I still don't see that LTO drive. > > Anyone with access to this: > > https://access.redhat.com/site/solutions/262773 managed to support the LTO on its controller now. But I somehow think the performance is sub-optimal. Does someone spot any obvious mistakes in my kernel config: http://pastebin.com/VGiJRMac ? When I run a backup via amanda .. the load is unusual high and I really wonder why ... I already rebuilt @system I now rebuild the kernel with "-O2" ... it was on "-Os" ... some old VM-template was used as seed for this installation ... I disabled HPET in BIOS as I always get dropped interrupts (KVM related?) Thanks for any hints! -> # emerge --info Portage 2.2.8-r1 (default/linux/amd64/13.0, gcc-4.7.3, glibc-2.17, 3.12.20-gentoo x86_64) ================================================================= System uname: Linux-3.12.20-gentoo-x86_64-Intel-R-_Xeon-R-_CPU_E5-2407_0_@_2.20GHz-with-gentoo-2.2 KiB Mem: 16414588 total, 7848248 free KiB Swap: 8388604 total, 8388604 free Timestamp of tree: Mon, 26 May 2014 06:00:01 +0000 ld GNU ld (GNU Binutils) 2.23.2 app-shells/bash: 4.2_p45 dev-lang/python: 2.7.6, 3.2.5-r2, 3.3.3 dev-util/cmake: 2.8.11.2 dev-util/pkgconfig: 0.28 sys-apps/baselayout: 2.2 sys-apps/openrc: 0.12.4 sys-apps/sandbox: 2.6-r1 sys-devel/autoconf: 2.69 sys-devel/automake: 1.13.4 sys-devel/binutils: 2.23.2 sys-devel/gcc: 4.7.3-r1 sys-devel/gcc-config: 1.7.3 sys-devel/libtool: 2.4.2 sys-devel/make: 3.82-r4 sys-kernel/linux-headers: 3.13 (virtual/os-headers) sys-libs/glibc: 2.17 Repositories: gentoo hiro-oops-intern ACCEPT_KEYWORDS="amd64" ACCEPT_LICENSE="* -@EULA" CBUILD="x86_64-pc-linux-gnu" CFLAGS="-march=corei7-avx -O2 -pipe" CHOST="x86_64-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt" CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo" CXXFLAGS="-march=corei7-avx -O2 -pipe" DISTDIR="/usr/portage/distfiles" FCFLAGS="-O2 -pipe" FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news notitles parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync" FFLAGS="-O2 -pipe" GENTOO_MIRRORS="http://distfiles.gentoo.org" LANG="de_DE.UTF-8" LDFLAGS="-Wl,-O1 -Wl,--as-needed" MAKEOPTS="-j5" PKGDIR="/var/portage/packages" PORTAGE_CONFIGROOT="/" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/usr/local/portage" SYNC="rsync://172.32.99.6/gentoo-portage" USE="acl amd64 berkdb bzip2 cli cracklib crypt cxx dri fortran gdbm iconv ipv6 mmx modules multilib ncurses nls nptl openmp pam pcre readline session sse sse2 ssl systemd tcpd udev unicode zlib" ABI_X86="64" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="alias cgi headers filter deflate perl" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CURL_SSL="openssl" DRACUT_MODULES="biosdevname btrfs caps lvm mdraid" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" PYTHON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_3" RUBY_TARGETS="ruby19 ruby20" USERLAND="GNU" VIDEO_CARDS="fbdev glint intel mach64 mga nouveau nv r128 radeon savage sis tdfx trident vesa via vmware dummy v4l" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account" Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-05-26 17:47 ` Stefan G. Weichinger @ 2014-05-26 19:57 ` Stefan G. Weichinger 2014-05-27 13:03 ` Stefan G. Weichinger 0 siblings, 1 reply; 30+ messages in thread From: Stefan G. Weichinger @ 2014-05-26 19:57 UTC (permalink / raw To: gentoo-user Am 26.05.2014 19:47, schrieb Stefan G. Weichinger: > But I somehow think the performance is sub-optimal. virt-backup is slow as well (using dd and gzip or pigz in my own patched version). Yes, that LVM stuff again ... I run 6 SAS disks and built hardware raids. Should I look into the cache settings there? way too slow ... ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-05-26 19:57 ` Stefan G. Weichinger @ 2014-05-27 13:03 ` Stefan G. Weichinger 2014-06-10 19:57 ` Stefan G. Weichinger 2014-06-11 9:19 ` thegeezer 0 siblings, 2 replies; 30+ messages in thread From: Stefan G. Weichinger @ 2014-05-27 13:03 UTC (permalink / raw To: gentoo-user Am 26.05.2014 21:57, schrieb Stefan G. Weichinger: > Am 26.05.2014 19:47, schrieb Stefan G. Weichinger: > >> But I somehow think the performance is sub-optimal. > > virt-backup is slow as well (using dd and gzip or pigz in my own patched > version). Yes, that LVM stuff again ... > > I run 6 SAS disks and built hardware raids. > > Should I look into the cache settings there? > > > way too slow ... I think I have some IO-topic going on ... very likely some mismatch of block sizes ... the hw-raid, then LVM, then the snapshot on top of that ... and a filesystem with properties as target ... oh my. Chosing noop as IO-scheduler helps a bit but maybe I have to roll back and rebuild one of the HW-RAID-Arrays with a different blocksize. Stefan ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-05-27 13:03 ` Stefan G. Weichinger @ 2014-06-10 19:57 ` Stefan G. Weichinger 2014-06-10 20:02 ` Stefan G. Weichinger 2014-06-11 9:19 ` thegeezer 1 sibling, 1 reply; 30+ messages in thread From: Stefan G. Weichinger @ 2014-06-10 19:57 UTC (permalink / raw To: gentoo-user Am 27.05.2014 15:03, schrieb Stefan G. Weichinger: >> way too slow ... > > I think I have some IO-topic going on ... very likely some mismatch of > block sizes ... > > the hw-raid, then LVM, then the snapshot on top of that ... and a > filesystem with properties as target ... oh my. > > Chosing noop as IO-scheduler helps a bit but maybe I have to roll back > and rebuild one of the HW-RAID-Arrays with a different blocksize. back from short vacation and re-attacking this one ... I am not sure if I set up the HW-RAIDs correctly and want to move data away from the LVM (yes, again) to try to rebuild the array /dev/sdc I have: # lsblk -o NAME,FSTYPE,UUID,SIZE,TYPE,MOUNTPOINT,LABEL,MODEL,PHY-SEC,MIN-IO NAME FSTYPE UUID SIZE TYPE MOUNTPOINT LABEL MODEL PHY-SEC MIN-IO sda btrfs 9133c469-df1e-45f5-a09f-d1b9c75c69da 500G disk /mnt/defvol ROOT RAID 5/6 SAS 6G 4096 4096 sdb swap 102d41a8-848d-4525-b39e-d9b543355b71 8G disk [SWAP] SWAP RAID 5/6 SAS 6G 4096 4096 sdc LVM2_member Z2LEVf-ZJch-cqi3-GVob-Jpd2-eweJ-sDtW7H 1,3T disk RAID 5/6 SAS 6G 4096 4096 ├─vg01-amhold xfs 96b7395b-6e81-4660-9459-6a7ad83d8861 400G lvm /mnt/amhold AMHOLD 4096 4096 └─vg01-winserver_disk0 244,1G lvm 4096 4096 (sorry for the ugly format ... should I post a URL?) Is the value for PHY-SEC my problem? The 4 MB ... ? - So sdc is a PV in VG vg01 ... which contains a KVM-diskimage /dev/vg01/winserver_disk0 I use the noop scheduler btw ... I try a dd (or ddrescue) from that LV to somewhere else and only get around 1-5 MB/s ... this takes way too long. --- example with external disk as target: ddrescue -v --block-size=4M /dev/vg01/winserver_disk0 /mnt/ext/virt-backup/windows-server/windows-server_vda.img tried local root-fs as target, different block sizes etc. --- The system is an updated and stable gentoo amd64 box -> # emerge --info Portage 2.2.8-r1 (default/linux/amd64/13.0, gcc-4.7.3, glibc-2.17, 3.12.21-gentoo-r1 x86_64) ================================================================= System uname: Linux-3.12.21-gentoo-r1-x86_64-Intel-R-_Xeon-R-_CPU_E5-2407_0_@_2.20GHz-with-gentoo-2.2 KiB Mem: 16413444 total, 9252100 free KiB Swap: 8388604 total, 8388604 free Timestamp of tree: Tue, 10 Jun 2014 07:30:01 +0000 ld GNU ld (GNU Binutils) 2.23.2 app-shells/bash: 4.2_p45 dev-lang/python: 2.7.6, 3.2.5-r2, 3.3.3 dev-util/cmake: 2.8.11.2 dev-util/pkgconfig: 0.28 sys-apps/baselayout: 2.2 sys-apps/openrc: 0.12.4 sys-apps/sandbox: 2.6-r1 sys-devel/autoconf: 2.69 sys-devel/automake: 1.13.4 sys-devel/binutils: 2.23.2 sys-devel/gcc: 4.7.3-r1 sys-devel/gcc-config: 1.7.3 sys-devel/libtool: 2.4.2 sys-devel/make: 3.82-r4 sys-kernel/linux-headers: 3.13 (virtual/os-headers) sys-libs/glibc: 2.17 Repositories: gentoo hiro-oops-intern ACCEPT_KEYWORDS="amd64" ACCEPT_LICENSE="* -@EULA" CBUILD="x86_64-pc-linux-gnu" CFLAGS="-march=corei7-avx -O2 -pipe" CHOST="x86_64-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt" CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo" CXXFLAGS="-march=corei7-avx -O2 -pipe" DISTDIR="/usr/portage/distfiles" FCFLAGS="-O2 -pipe" FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news notitles parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync" FFLAGS="-O2 -pipe" GENTOO_MIRRORS="http://distfiles.gentoo.org" LANG="de_DE.UTF-8" LDFLAGS="-Wl,-O1 -Wl,--as-needed" MAKEOPTS="-j5" PKGDIR="/var/portage/packages" PORTAGE_CONFIGROOT="/" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/usr/local/portage" SYNC="rsync://172.32.99.6/gentoo-portage" USE="acl amd64 berkdb bzip2 cli cracklib crypt cxx dri fortran gdbm iconv ipv6 mmx modules multilib ncurses nls nptl openmp pam pcre readline session sse sse2 ssl systemd tcpd udev unicode zlib" ABI_X86="64" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="alias cgi headers filter deflate perl" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CURL_SSL="openssl" DRACUT_MODULES="biosdevname btrfs caps lvm mdraid" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" PYTHON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_3" RUBY_TARGETS="ruby19 ruby20" USERLAND="GNU" VIDEO_CARDS="fbdev glint intel mach64 mga nouveau nv r128 radeon savage sis tdfx trident vesa via vmware dummy v4l" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account" Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON Taking the hardware it should be much much faster, right? I would appreciate some hints to debug this. Maybe I have to remove the OS and the VM again and rebuild the RAIDs from scratch ... thanks, Stefan ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-10 19:57 ` Stefan G. Weichinger @ 2014-06-10 20:02 ` Stefan G. Weichinger 2014-06-10 22:27 ` Stefan G. Weichinger 0 siblings, 1 reply; 30+ messages in thread From: Stefan G. Weichinger @ 2014-06-10 20:02 UTC (permalink / raw To: gentoo-user additional infos from journalctl. I don't like the fact with 512-byte logical blocks vs. 4096-byte physical blocks ... sounds wrong, hm? -> Jun 10 21:54:31 booze kernel: megaraid_sas 0000:02:00.0: Controller type: MR,Memory size is: 512MB Jun 10 21:54:31 booze kernel: scsi7 : LSI SAS based MegaRAID driver Jun 10 21:54:31 booze kernel: scsi 7:0:1:0: Direct-Access ATA ST9500620NS FTA7 PQ: 0 ANSI: 5 Jun 10 21:54:31 booze kernel: scsi 7:0:2:0: Direct-Access ATA ST9500620NS FTA7 PQ: 0 ANSI: 5 Jun 10 21:54:31 booze kernel: scsi 7:0:3:0: Direct-Access ATA ST9500620NS FTA7 PQ: 0 ANSI: 5 Jun 10 21:54:31 booze kernel: scsi 7:0:4:0: Direct-Access ATA ST9500620NS FTA7 PQ: 0 ANSI: 5 Jun 10 21:54:31 booze kernel: scsi 7:0:5:0: Direct-Access ATA ST9500620NS FTA7 PQ: 0 ANSI: 5 Jun 10 21:54:31 booze kernel: scsi 7:0:6:0: Direct-Access ATA ST9500620NS FTA7 PQ: 0 ANSI: 5 Jun 10 21:54:31 booze kernel: scsi 7:2:0:0: Direct-Access LSI RAID 5/6 SAS 6G 2.13 PQ: 0 ANSI: 5 Jun 10 21:54:31 booze kernel: sd 7:2:0:0: [sda] 1048576000 512-byte logical blocks: (536 GB/500 GiB) Jun 10 21:54:31 booze kernel: sd 7:2:0:0: Attached scsi generic sg2 type 0 Jun 10 21:54:31 booze kernel: scsi 7:2:1:0: Direct-Access LSI RAID 5/6 SAS 6G 2.13 PQ: 0 ANSI: 5 Jun 10 21:54:31 booze kernel: sd 7:2:0:0: [sda] 4096-byte physical blocks Jun 10 21:54:31 booze kernel: sd 7:2:1:0: [sdb] 16777216 512-byte logical blocks: (8.58 GB/8.00 GiB) Jun 10 21:54:31 booze kernel: sd 7:2:1:0: [sdb] 4096-byte physical blocks Jun 10 21:54:31 booze kernel: sd 7:2:1:0: Attached scsi generic sg3 type 0 Jun 10 21:54:31 booze kernel: sd 7:2:1:0: [sdb] Write Protect is off Jun 10 21:54:31 booze kernel: sd 7:2:1:0: [sdb] Mode Sense: 1f 00 10 08 Jun 10 21:54:31 booze kernel: sd 7:2:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA Jun 10 21:54:31 booze kernel: scsi 7:2:2:0: Direct-Access LSI RAID 5/6 SAS 6G 2.13 PQ: 0 ANSI: 5 Jun 10 21:54:31 booze kernel: sd 7:2:2:0: [sdc] 2837446656 512-byte logical blocks: (1.45 TB/1.32 TiB) Jun 10 21:54:31 booze kernel: sd 7:2:2:0: [sdc] 4096-byte physical blocks Jun 10 21:54:31 booze kernel: sd 7:2:2:0: [sdc] Write Protect is off Jun 10 21:54:31 booze kernel: sd 7:2:2:0: [sdc] Mode Sense: 1f 00 00 08 Jun 10 21:54:31 booze kernel: sd 7:2:2:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 10 21:54:31 booze kernel: sd 7:2:2:0: Attached scsi generic sg4 type 0 Jun 10 21:54:31 booze kernel: sd 7:2:0:0: [sda] Write Protect is off Jun 10 21:54:31 booze kernel: sd 7:2:0:0: [sda] Mode Sense: 1f 00 00 08 Jun 10 21:54:31 booze kernel: sd 7:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 10 21:54:31 booze kernel: sdb: unknown partition table Jun 10 21:54:31 booze kernel: sd 7:2:1:0: [sdb] Attached SCSI disk Jun 10 21:54:31 booze kernel: sdc: unknown partition table Jun 10 21:54:31 booze kernel: sd 7:2:2:0: [sdc] Attached SCSI disk Jun 10 21:54:31 booze kernel: sda: Jun 10 21:54:31 booze kernel: sd 7:2:0:0: [sda] Attached SCSI disk Jun 10 21:54:31 booze systemd[1]: Found device RAID_5_6_SAS_6G ROOT. ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-10 20:02 ` Stefan G. Weichinger @ 2014-06-10 22:27 ` Stefan G. Weichinger 2014-06-11 8:47 ` Stefan G. Weichinger 0 siblings, 1 reply; 30+ messages in thread From: Stefan G. Weichinger @ 2014-06-10 22:27 UTC (permalink / raw To: gentoo-user Found out something about megacli and checked settings for cache and stuff following http://highperfpostgres.com/guides/lsi-megaraid-setup-for-postgresql/ Did I set a wrong Strip Size for the third array? good night, late here ... Stefan # megacli -LDInfo -Lall -aALL Adapter 0 -- Virtual Drive Information: Virtual Drive: 0 (Target Id: 0) Name :root RAID Level : Primary-6, Secondary-3, RAID Level Qualifier-3 Size : 500.0 GB Sector Size : 512 Is VD emulated : No Parity Size : 250.0 GB State : Optimal Strip Size : 256 KB Number Of Drives : 6 Span Depth : 1 Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Default Access Policy: Read/Write Current Access Policy: Read/Write Disk Cache Policy : Disabled Encryption Type : None Bad Blocks Exist: No Is VD Cached: No Virtual Drive: 1 (Target Id: 1) Name :swap RAID Level : Primary-6, Secondary-3, RAID Level Qualifier-3 Size : 8.0 GB Sector Size : 512 Is VD emulated : No Parity Size : 4.0 GB State : Optimal Strip Size : 64 KB Number Of Drives : 6 Span Depth : 1 Default Cache Policy: WriteBack, ReadAheadNone, Cached, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAheadNone, Cached, No Write Cache if Bad BBU Default Access Policy: Read/Write Current Access Policy: Read/Write Disk Cache Policy : Disabled Encryption Type : None Bad Blocks Exist: No Is VD Cached: No Virtual Drive: 2 (Target Id: 2) Name :lvm RAID Level : Primary-6, Secondary-3, RAID Level Qualifier-3 Size : 1.321 TB Sector Size : 512 Is VD emulated : No Parity Size : 676.5 GB State : Optimal Strip Size : 64 KB Number Of Drives : 6 Span Depth : 1 Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Default Access Policy: Read/Write Current Access Policy: Read/Write Disk Cache Policy : Disabled Encryption Type : None Bad Blocks Exist: No Is VD Cached: No ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-10 22:27 ` Stefan G. Weichinger @ 2014-06-11 8:47 ` Stefan G. Weichinger 0 siblings, 0 replies; 30+ messages in thread From: Stefan G. Weichinger @ 2014-06-11 8:47 UTC (permalink / raw To: gentoo-user hello again ... noone interested? ;-) I understand in a way ... Maybe I have something in the kernel misconfigured ... Right now I get these messages again: [ 1998.118658] hpet1: lost 1 rtc interrupts Should I disable HPET in the BIOS and/or via kernel command line? I never know how to set the timer-related kernel options, especially with KVM hosting. Stefan ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-05-27 13:03 ` Stefan G. Weichinger 2014-06-10 19:57 ` Stefan G. Weichinger @ 2014-06-11 9:19 ` thegeezer 2014-06-11 9:34 ` Stefan G. Weichinger 1 sibling, 1 reply; 30+ messages in thread From: thegeezer @ 2014-06-11 9:19 UTC (permalink / raw To: gentoo-user On 05/27/2014 02:03 PM, Stefan G. Weichinger wrote: > I think I have some IO-topic going on ... very likely some mismatch of > block sizes ... the hw-raid, then LVM, then the snapshot on top of > that ... and a filesystem with properties as target ... oh my. Chosing > noop as IO-scheduler helps a bit but maybe I have to roll back and > rebuild one of the HW-RAID-Arrays with a different blocksize. Stefan Hi Stefan, block size / stripe size mismatches only really penalise random io, if you are trying to use dd and have slow speeds this would suggest something else is awry. I don't know the c600 rad chip personally, but in trying to google it it appears to be a motherboard based raid device? is it a real raid or fakeraid? I'm a little confused over your setup to help. i'm sorry if there is duplication but it would be useful to have all info in one hit rather than trying to piece it together from all your messages. 1. please can you list your hardware raid config. I'm looking for the physical disk sizes, the virtual disks and their raid types. do you have cache enabled on the raid card, is there a background scrub or anything like that running? do you have active seek/ prefetch configured ? parity size being 50% of total size is just odd to me - but i guess these are mirrors ? but it says raid-level3 --- just odd, most setups use raid0(not raid) raid1(mirror) raid5(parity stripe) raid6 (double parity stripe) or combinations, like 50.. raid3 is allocating a single disk to parity but is very rarely used. 2. how many other devices are actively doing IO? do you have any other raid cards/io cards of note that might be clashign on the board. 3. do you have active I/O when doing your performance tests? if you have several virtual machines running depending on what they are doing they will crucify your access. 4. are you using any type of CGroups ? 5. i'm also confused over your LVM config. please can you send the output of "vgs" "pvs" and "lvs -a -o +devices" 6. please also send the output of "mount" 7. do you have atop or iotop that you can use to monitor performance - specifically we are looking for disk ios per device and disk latency per device. both before and during you are trying to run your backup. this should give us a better idea of where the problems lay. ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-11 9:19 ` thegeezer @ 2014-06-11 9:34 ` Stefan G. Weichinger 2014-06-11 10:14 ` thegeezer 0 siblings, 1 reply; 30+ messages in thread From: Stefan G. Weichinger @ 2014-06-11 9:34 UTC (permalink / raw To: gentoo-user [-- Attachment #1: Type: text/plain, Size: 13112 bytes --] Am 11.06.2014 11:19, schrieb thegeezer: > Hi Stefan, > block size / stripe size mismatches only really penalise random io, if > you are trying to use dd and have slow speeds this would suggest > something else is awry. > I don't know the c600 rad chip personally, but in trying to google it it > appears to be a motherboard based raid device? is it a real raid or > fakeraid? > > I'm a little confused over your setup to help. i'm sorry if there is > duplication but it would be useful to have all info in one hit rather > than trying to piece it together from all your messages. OK, will do ... > 1. please can you list your hardware raid config. I'm looking for the > physical disk sizes, the virtual disks and their raid types. do you have > cache enabled on the raid card, is there a background scrub or anything > like that running? do you have active seek/ prefetch configured ? > parity size being 50% of total size is just odd to me - but i guess > these are mirrors ? but it says raid-level3 --- just odd, most setups > use raid0(not raid) raid1(mirror) raid5(parity stripe) raid6 (double > parity stripe) or combinations, like 50.. raid3 is allocating a single > disk to parity but is very rarely used. Basically 3 RAID-6 hw-raids over 6 SAS hdds. I don't know where this RAID-3 term comes from -> # megacli -LDInfo -Lall -aALL Adapter 0 -- Virtual Drive Information: Virtual Drive: 0 (Target Id: 0) Name :root RAID Level : Primary-6, Secondary-3, RAID Level Qualifier-3 Size : 500.0 GB Sector Size : 512 Is VD emulated : No Parity Size : 250.0 GB State : Optimal Strip Size : 256 KB Number Of Drives : 6 Span Depth : 1 Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Default Access Policy: Read/Write Current Access Policy: Read/Write Disk Cache Policy : Disabled Encryption Type : None Bad Blocks Exist: No Is VD Cached: No Virtual Drive: 1 (Target Id: 1) Name :swap RAID Level : Primary-6, Secondary-3, RAID Level Qualifier-3 Size : 8.0 GB Sector Size : 512 Is VD emulated : No Parity Size : 4.0 GB State : Optimal Strip Size : 64 KB Number Of Drives : 6 Span Depth : 1 Default Cache Policy: WriteBack, ReadAheadNone, Cached, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAheadNone, Cached, No Write Cache if Bad BBU Default Access Policy: Read/Write Current Access Policy: Read/Write Disk Cache Policy : Disabled Encryption Type : None Bad Blocks Exist: No Is VD Cached: No Virtual Drive: 2 (Target Id: 2) Name :lvm RAID Level : Primary-6, Secondary-3, RAID Level Qualifier-3 Size : 1.321 TB Sector Size : 512 Is VD emulated : No Parity Size : 676.5 GB State : Optimal Strip Size : 64 KB Number Of Drives : 6 Span Depth : 1 Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Default Access Policy: Read/Write Current Access Policy: Read/Write Disk Cache Policy : Disabled Encryption Type : None Bad Blocks Exist: No Is VD Cached: No > 2. how many other devices are actively doing IO? do you have any other > raid cards/io cards of note that might be clashign on the board. The Intel C600 Controller seems to only run the LTO-4-drive in the server while the LSI Logic / Symbios Logic MegaRAID SAS 2108 runs the 6 hard disks. # lspci 00:00.0 Host bridge: Intel Corporation Xeon E5/Core i7 DMI2 (rev 07) 00:01.0 PCI bridge: Intel Corporation Xeon E5/Core i7 IIO PCI Express Root Port 1a (rev 07) 00:01.1 PCI bridge: Intel Corporation Xeon E5/Core i7 IIO PCI Express Root Port 1b (rev 07) 00:03.0 PCI bridge: Intel Corporation Xeon E5/Core i7 IIO PCI Express Root Port 3a in PCI Express Mode (rev 07) 00:05.0 System peripheral: Intel Corporation Xeon E5/Core i7 Address Map, VTd_Misc, System Management (rev 07) 00:05.2 System peripheral: Intel Corporation Xeon E5/Core i7 Control Status and Global Errors (rev 07) 00:05.4 PIC: Intel Corporation Xeon E5/Core i7 I/O APIC (rev 07) 00:11.0 PCI bridge: Intel Corporation C600/X79 series chipset PCI Express Virtual Root Port (rev 05) 00:1a.0 USB controller: Intel Corporation C600/X79 series chipset USB2 Enhanced Host Controller #2 (rev 05) 00:1c.0 PCI bridge: Intel Corporation C600/X79 series chipset PCI Express Root Port 1 (rev b5) 00:1c.4 PCI bridge: Intel Corporation C600/X79 series chipset PCI Express Root Port 5 (rev b5) 00:1c.5 PCI bridge: Intel Corporation C600/X79 series chipset PCI Express Root Port 6 (rev b5) 00:1c.7 PCI bridge: Intel Corporation C600/X79 series chipset PCI Express Root Port 8 (rev b5) 00:1d.0 USB controller: Intel Corporation C600/X79 series chipset USB2 Enhanced Host Controller #1 (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation C600/X79 series chipset LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation C600/X79 series chipset 6-Port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation C600/X79 series chipset SMBus Host Controller (rev 05) 02:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05) 04:00.0 Serial Attached SCSI controller: Intel Corporation C604/X79 series chipset 4-Port SATA/SAS Storage Control Unit (rev 05) 04:00.3 SMBus: Intel Corporation C600/X79 series chipset SMBus Controller 0 (rev 05) 06:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 07:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 08:00.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200e [Pilot] ServerEngines (SEP1) (rev 05) ff:08.0 System peripheral: Intel Corporation Xeon E5/Core i7 QPI Link 0 (rev 07) ff:08.3 System peripheral: Intel Corporation Xeon E5/Core i7 QPI Link Reut 0 (rev 07) ff:08.4 System peripheral: Intel Corporation Xeon E5/Core i7 QPI Link Reut 0 (rev 07) ff:09.0 System peripheral: Intel Corporation Xeon E5/Core i7 QPI Link 1 (rev 07) ff:09.3 System peripheral: Intel Corporation Xeon E5/Core i7 QPI Link Reut 1 (rev 07) ff:09.4 System peripheral: Intel Corporation Xeon E5/Core i7 QPI Link Reut 1 (rev 07) ff:0a.0 System peripheral: Intel Corporation Xeon E5/Core i7 Power Control Unit 0 (rev 07) ff:0a.1 System peripheral: Intel Corporation Xeon E5/Core i7 Power Control Unit 1 (rev 07) ff:0a.2 System peripheral: Intel Corporation Xeon E5/Core i7 Power Control Unit 2 (rev 07) ff:0a.3 System peripheral: Intel Corporation Xeon E5/Core i7 Power Control Unit 3 (rev 07) ff:0b.0 System peripheral: Intel Corporation Xeon E5/Core i7 Interrupt Control Registers (rev 07) ff:0b.3 System peripheral: Intel Corporation Xeon E5/Core i7 Semaphore and Scratchpad Configuration Registers (rev 07) ff:0c.0 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast Register 0 (rev 07) ff:0c.1 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast Register 0 (rev 07) ff:0c.6 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller System Address Decoder 0 (rev 07) ff:0c.7 System peripheral: Intel Corporation Xeon E5/Core i7 System Address Decoder (rev 07) ff:0d.0 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast Register 0 (rev 07) ff:0d.1 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast Register 0 (rev 07) ff:0d.6 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller System Address Decoder 1 (rev 07) ff:0e.0 System peripheral: Intel Corporation Xeon E5/Core i7 Processor Home Agent (rev 07) ff:0e.1 Performance counters: Intel Corporation Xeon E5/Core i7 Processor Home Agent Performance Monitoring (rev 07) ff:0f.0 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Registers (rev 07) ff:0f.1 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller RAS Registers (rev 07) ff:0f.2 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Target Address Decoder 0 (rev 07) ff:0f.3 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Target Address Decoder 1 (rev 07) ff:0f.4 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Target Address Decoder 2 (rev 07) ff:0f.5 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Target Address Decoder 3 (rev 07) ff:0f.6 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Target Address Decoder 4 (rev 07) ff:10.0 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Channel 0-3 Thermal Control 0 (rev 07) ff:10.1 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Channel 0-3 Thermal Control 1 (rev 07) ff:10.2 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller ERROR Registers 0 (rev 07) ff:10.3 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller ERROR Registers 1 (rev 07) ff:10.5 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Channel 0-3 Thermal Control 3 (rev 07) ff:10.6 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller ERROR Registers 2 (rev 07) ff:10.7 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller ERROR Registers 3 (rev 07) ff:11.0 System peripheral: Intel Corporation Xeon E5/Core i7 DDRIO (rev 07) ff:13.0 System peripheral: Intel Corporation Xeon E5/Core i7 R2PCIe (rev 07) ff:13.1 Performance counters: Intel Corporation Xeon E5/Core i7 Ring to PCI Express Performance Monitor (rev 07) ff:13.4 Performance counters: Intel Corporation Xeon E5/Core i7 QuickPath Interconnect Agent Ring Registers (rev 07) ff:13.5 Performance counters: Intel Corporation Xeon E5/Core i7 Ring to QuickPath Interconnect Link 0 Performance Monitor (rev 07) ff:13.6 System peripheral: Intel Corporation Xeon E5/Core i7 Ring to QuickPath Interconnect Link 1 Performance Monitor (rev 07) > 3. do you have active I/O when doing your performance tests? if you have > several virtual machines running depending on what they are doing they > will crucify your access. My testing was done with all the VMs stopped! > 4. are you using any type of CGroups ? Yes. systemd needs them. I attach the kernel-config. > 5. i'm also confused over your LVM config. please can you send the > output of "vgs" "pvs" and "lvs -a -o +devices" /dev/sdc is the third hardware raid array listed above and used as PV for the VG vg01 -> # pvs PV VG Fmt Attr PSize PFree /dev/sdc vg01 lvm2 a-- 1,32t 708,86g # vgs VG #PV #LV #SN Attr VSize VFree vg01 1 2 0 wz--n- 1,32t 708,86g # lvs -a -o +devices LV VG Attr LSize Pool Origin Data% Move Log Cpy%Sync Convert Devices amhold vg01 -wi-ao---- 400,00g /dev/sdc(0) winserver_disk0 vg01 -wi-ao---- 244,14g /dev/sdc(102400) > 6. please also send the output of "mount" # mount proc on /proc type proc (rw,nosuid,nodev,noexec,relatime) sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) devtmpfs on /dev type devtmpfs (rw,nosuid,size=8203540k,nr_inodes=2050885,mode=755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620) tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755) tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755) cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,release_agent=/usr/lib/systemd/systemd-cgroups-agent,name=systemd) cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset) cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpuacct,cpu) cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices) /dev/sda on / type btrfs (rw,noatime,space_cache) mqueue on /dev/mqueue type mqueue (rw,relatime) tmpfs on /tmp type tmpfs (rw) tmpfs on /var/tmp/portage type tmpfs (rw,relatime) /dev/mapper/vg01-amhold on /mnt/amhold type xfs (rw,noatime,attr2,inode64,noquota) tmpfs on /run/user/0 type tmpfs (rw,nosuid,nodev,relatime,size=1641324k,mode=700) /dev/sda on /mnt/btrfs_windows type btrfs (rw,noatime,space_cache) the last line is meant as a target directory for dumping the content of the LV winserver_disk0 ... it is a btrfs subvolume mounted with compression turned OFF. > 7. do you have atop or iotop that you can use to monitor performance - > specifically we are looking for disk ios per device and disk latency per > device. both before and during you are trying to run your backup. I will install atop and check ... > this should give us a better idea of where the problems lay. Thanks so far! Stefan [-- Attachment #2: boozeconfig --] [-- Type: text/plain, Size: 70040 bytes --] # # Automatically generated file; DO NOT EDIT. # Linux/x86 3.12.21-gentoo-r1 Kernel Configuration # # # Gentoo Linux # CONFIG_GENTOO_LINUX=y CONFIG_GENTOO_LINUX_UDEV=y # # Support for init systems, system and service managers # CONFIG_GENTOO_LINUX_INIT_SCRIPT=y CONFIG_GENTOO_LINUX_INIT_SYSTEMD=y CONFIG_64BIT=y CONFIG_X86_64=y CONFIG_X86=y CONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_MMU=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_ARCH_HAS_CPU_AUTOPROBE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y CONFIG_ARCH_WANT_GENERAL_HUGETLB=y CONFIG_ZONE_DMA32=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_X86_64_SMP=y CONFIG_X86_HT=y CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" CONFIG_ARCH_CPU_PROBE_RELEASE=y CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_EXTABLE_SORT=y # # General setup # CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" # CONFIG_COMPILE_TEST is not set CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_XZ=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_HAVE_KERNEL_LZ4=y # CONFIG_KERNEL_GZIP is not set # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set CONFIG_KERNEL_XZ=y # CONFIG_KERNEL_LZO is not set # CONFIG_KERNEL_LZ4 is not set CONFIG_DEFAULT_HOSTNAME="(none)" CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_FHANDLE=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_WATCH=y CONFIG_AUDIT_TREE=y # CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set # # IRQ subsystem # CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_SPARSE_IRQ=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_ARCH_CLOCKSOURCE_DATA=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y CONFIG_GENERIC_CMOS_UPDATE=y # # Timers subsystem # CONFIG_TICK_ONESHOT=y CONFIG_HZ_PERIODIC=y # CONFIG_NO_HZ_IDLE is not set # CONFIG_NO_HZ_FULL is not set CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y # # CPU/Task time and stats accounting # CONFIG_TICK_CPU_ACCOUNTING=y # CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set # CONFIG_IRQ_TIME_ACCOUNTING is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y # CONFIG_TASK_XACCT is not set # # RCU Subsystem # CONFIG_TREE_RCU=y # CONFIG_PREEMPT_RCU is not set CONFIG_RCU_STALL_COMMON=y # CONFIG_RCU_USER_QS is not set CONFIG_RCU_FANOUT=64 CONFIG_RCU_FANOUT_LEAF=16 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set # CONFIG_RCU_NOCB_CPU is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set # CONFIG_CGROUP_FREEZER is not set CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y CONFIG_PROC_PID_CPUSET=y CONFIG_CGROUP_CPUACCT=y # CONFIG_RESOURCE_COUNTERS is not set # CONFIG_CGROUP_PERF is not set CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_CFS_BANDWIDTH is not set # CONFIG_RT_GROUP_SCHED is not set # CONFIG_BLK_CGROUP is not set # CONFIG_CHECKPOINT_RESTORE is not set CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_IPC_NS=y # CONFIG_USER_NS is not set CONFIG_PID_NS=y CONFIG_NET_NS=y # CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set # CONFIG_SCHED_AUTOGROUP is not set # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set # CONFIG_RD_XZ is not set # CONFIG_RD_LZO is not set # CONFIG_RD_LZ4 is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_HAVE_UID16=y CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_HAVE_PCSPKR_PLATFORM=y CONFIG_EXPERT=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_PRINTK=y # CONFIG_BUG is not set # CONFIG_ELF_CORE is not set # CONFIG_PCSPKR_PLATFORM is not set # CONFIG_BASE_FULL is not set CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_PCI_QUIRKS=y # CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y # CONFIG_DEBUG_PERF_USE_VMALLOC is not set # CONFIG_VM_EVENT_COUNTERS is not set # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set # CONFIG_SLUB is not set CONFIG_SLOB=y # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y CONFIG_OPROFILE_NMI_TIMER=y # CONFIG_KPROBES is not set CONFIG_JUMP_LABEL=y # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_ARCH_USE_BUILTIN_BSWAP=y CONFIG_USER_RETURN_NOTIFIER=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_KPROBES_ON_FTRACE=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y CONFIG_HAVE_USER_RETURN_NOTIFIER=y CONFIG_HAVE_PERF_EVENTS_NMI=y CONFIG_HAVE_PERF_REGS=y CONFIG_HAVE_PERF_USER_STACK_DUMP=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y CONFIG_HAVE_CMPXCHG_LOCAL=y CONFIG_HAVE_CMPXCHG_DOUBLE=y CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_SECCOMP_FILTER=y CONFIG_HAVE_CONTEXT_TRACKING=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y CONFIG_HAVE_ARCH_SOFT_DIRTY=y CONFIG_MODULES_USE_ELF_RELA=y CONFIG_OLD_SIGSUSPEND3=y CONFIG_COMPAT_OLD_SIGACTION=y # # GCOV-based kernel profiling # # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=1 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_MODULE_SIG is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_BSGLIB is not set # CONFIG_BLK_DEV_INTEGRITY is not set # CONFIG_BLK_CMDLINE_PARSER is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_AIX_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_CMDLINE_PARTITION is not set CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_PREEMPT_NOTIFIERS=y CONFIG_INLINE_SPIN_UNLOCK_IRQ=y CONFIG_INLINE_READ_UNLOCK=y CONFIG_INLINE_READ_UNLOCK_IRQ=y CONFIG_INLINE_WRITE_UNLOCK=y CONFIG_INLINE_WRITE_UNLOCK_IRQ=y CONFIG_MUTEX_SPIN_ON_OWNER=y # CONFIG_FREEZER is not set # # Processor type and features # CONFIG_ZONE_DMA=y CONFIG_SMP=y # CONFIG_X86_MPPARSE is not set # CONFIG_X86_EXTENDED_PLATFORM is not set # CONFIG_X86_INTEL_LPSS is not set # CONFIG_SCHED_OMIT_FRAME_POINTER is not set # CONFIG_HYPERVISOR_GUEST is not set CONFIG_NO_BOOTMEM=y # CONFIG_MEMTEST is not set # CONFIG_MK8 is not set # CONFIG_MPSC is not set CONFIG_MCORE2=y # CONFIG_MATOM is not set # CONFIG_GENERIC_CPU is not set CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_P6_NOP=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_PROCESSOR_SELECT=y CONFIG_CPU_SUP_INTEL=y # CONFIG_CPU_SUP_AMD is not set # CONFIG_CPU_SUP_CENTAUR is not set CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y # CONFIG_MAXSMP is not set CONFIG_NR_CPUS=32 # CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y # CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set # CONFIG_X86_MCE is not set # CONFIG_I8K is not set CONFIG_MICROCODE=y CONFIG_MICROCODE_INTEL=y # CONFIG_MICROCODE_AMD is not set CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_MICROCODE_INTEL_LIB=y CONFIG_MICROCODE_INTEL_EARLY=y # CONFIG_MICROCODE_AMD_EARLY is not set CONFIG_MICROCODE_EARLY=y # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y # CONFIG_NUMA is not set CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_PROC_KCORE_TEXT=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_HAVE_MEMBLOCK=y CONFIG_HAVE_MEMBLOCK_NODE_MAP=y CONFIG_ARCH_DISCARD_MEMBLOCK=y # CONFIG_HAVE_BOOTMEM_INFO_NODE is not set # CONFIG_MEMORY_HOTPLUG is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_BALLOON_COMPACTION=y CONFIG_COMPACTION=y CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_MMU_NOTIFIER=y CONFIG_KSM=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y # CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set CONFIG_CROSS_MEMORY_ATTACH=y # CONFIG_CLEANCACHE is not set # CONFIG_FRONTSWAP is not set # CONFIG_CMA is not set # CONFIG_ZBUD is not set # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW=64 CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_ARCH_RANDOM=y CONFIG_X86_SMAP=y CONFIG_EFI=y # CONFIG_EFI_STUB is not set CONFIG_SECCOMP=y # CONFIG_CC_STACKPROTECTOR is not set CONFIG_HZ_100=y # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 CONFIG_SCHED_HRTICK=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x1000000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y # CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set # CONFIG_DEBUG_HOTPLUG_CPU0 is not set # CONFIG_COMPAT_VDSO is not set # CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # # Power management and ACPI options # # CONFIG_SUSPEND is not set # CONFIG_HIBERNATION is not set # CONFIG_PM_RUNTIME is not set CONFIG_ACPI=y CONFIG_ACPI_PROCFS=y # CONFIG_ACPI_PROCFS_POWER is not set # CONFIG_ACPI_EC_DEBUGFS is not set CONFIG_ACPI_AC=m # CONFIG_ACPI_BATTERY is not set CONFIG_ACPI_BUTTON=m # CONFIG_ACPI_FAN is not set # CONFIG_ACPI_DOCK is not set CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_HOTPLUG_CPU=y # CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set CONFIG_ACPI_THERMAL=m # CONFIG_ACPI_CUSTOM_DSDT is not set # CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_PCI_SLOT=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set # CONFIG_ACPI_HED is not set # CONFIG_ACPI_BGRT is not set # CONFIG_ACPI_APEI is not set # CONFIG_SFI is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_GOV_COMMON=y CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_ONDEMAND=m # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # x86 CPU frequency scaling drivers # CONFIG_X86_INTEL_PSTATE=y # CONFIG_X86_PCC_CPUFREQ is not set # CONFIG_X86_ACPI_CPUFREQ is not set # CONFIG_X86_SPEEDSTEP_CENTRINO is not set # CONFIG_X86_P4_CLOCKMOD is not set # # shared options # # CONFIG_X86_SPEEDSTEP_LIB is not set # # CPU Idle # CONFIG_CPU_IDLE=y # CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set CONFIG_INTEL_IDLE=y # # Memory power savings # # CONFIG_I7300_IDLE is not set # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y # CONFIG_PCI_MMCONFIG is not set CONFIG_PCI_DOMAINS=y # CONFIG_PCI_CNB20LE_QUIRK is not set CONFIG_PCIEPORTBUS=y CONFIG_HOTPLUG_PCI_PCIE=y # CONFIG_PCIEAER is not set CONFIG_PCIEASPM=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM_DEFAULT=y # CONFIG_PCIEASPM_POWERSAVE is not set # CONFIG_PCIEASPM_PERFORMANCE is not set CONFIG_PCI_MSI=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_REALLOC_ENABLE_AUTO is not set # CONFIG_PCI_STUB is not set CONFIG_HT_IRQ=y CONFIG_PCI_ATS=y CONFIG_PCI_IOV=y # CONFIG_PCI_PRI is not set # CONFIG_PCI_PASID is not set CONFIG_PCI_IOAPIC=y CONFIG_PCI_LABEL=y # # PCI host controller drivers # CONFIG_ISA_DMA_API=y # CONFIG_PCCARD is not set CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_ACPI=y # CONFIG_HOTPLUG_PCI_ACPI_IBM is not set # CONFIG_HOTPLUG_PCI_CPCI is not set # CONFIG_HOTPLUG_PCI_SHPC is not set # CONFIG_RAPIDIO is not set # CONFIG_X86_SYSFB is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y CONFIG_BINFMT_SCRIPT=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_COREDUMP=y CONFIG_IA32_EMULATION=y # CONFIG_IA32_AOUT is not set # CONFIG_X86_X32 is not set CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_X86_DEV_DMA_OPS=y CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_DIAG is not set CONFIG_UNIX=y # CONFIG_UNIX_DIAG is not set CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE_DEMUX is not set CONFIG_NET_IP_TUNNEL=y CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_INET_LRO=y # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y # CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_GRE is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETWORK_PHY_TIMESTAMPING is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_NETFILTER_ADVANCED=y CONFIG_BRIDGE_NETFILTER=y # # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK_ACCT is not set # CONFIG_NETFILTER_NETLINK_QUEUE is not set # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set # CONFIG_IP_VS is not set # # IP: Netfilter Configuration # # CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set # # IPv6: Netfilter Configuration # # CONFIG_NF_DEFRAG_IPV6 is not set # CONFIG_IP6_NF_IPTABLES is not set # CONFIG_BRIDGE_NF_EBTABLES is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_L2TP is not set CONFIG_STP=m CONFIG_BRIDGE=m CONFIG_BRIDGE_IGMP_SNOOPING=y CONFIG_HAVE_NET_DSA=y # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_PHONET is not set # CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set # CONFIG_BATMAN_ADV is not set # CONFIG_OPENVSWITCH is not set # CONFIG_VSOCKETS is not set # CONFIG_NETLINK_MMAP is not set # CONFIG_NETLINK_DIAG is not set # CONFIG_NET_MPLS_GSO is not set CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_XPS=y # CONFIG_NETPRIO_CGROUP is not set CONFIG_NET_RX_BUSY_POLL=y CONFIG_BQL=y # CONFIG_BPF_JIT is not set CONFIG_NET_FLOW_LIMIT=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # CONFIG_CAIF is not set # CONFIG_CEPH_LIB is not set # CONFIG_NFC is not set CONFIG_HAVE_BPF_JIT=y # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="" CONFIG_DEVTMPFS=y # CONFIG_DEVTMPFS_MOUNT is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_EXTRA_FIRMWARE="" CONFIG_FW_LOADER_USER_HELPER=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_GENERIC_CPU_DEVICES is not set # CONFIG_DMA_SHARED_BUFFER is not set # # Bus devices # CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y CONFIG_PNP_DEBUG_MESSAGES=y # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_NVME is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_VIRTIO_BLK=y # CONFIG_BLK_DEV_HD is not set # CONFIG_BLK_DEV_RBD is not set # CONFIG_BLK_DEV_RSXX is not set # # Misc devices # # CONFIG_SENSORS_LIS3LV02D is not set # CONFIG_AD525X_DPOT is not set # CONFIG_DUMMY_IRQ is not set # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ATMEL_SSC is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_APDS9802ALS is not set # CONFIG_ISL29003 is not set # CONFIG_ISL29020 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_SENSORS_BH1780 is not set # CONFIG_SENSORS_BH1770 is not set # CONFIG_SENSORS_APDS990X is not set # CONFIG_HMC6352 is not set # CONFIG_DS1682 is not set # CONFIG_BMP085_I2C is not set # CONFIG_PCH_PHUB is not set # CONFIG_USB_SWITCH_FSA9480 is not set # CONFIG_SRAM is not set # CONFIG_C2PORT is not set # # EEPROM support # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_CB710_CORE is not set # # Texas Instruments shared transport line discipline # # CONFIG_SENSORS_LIS3_I2C is not set # # Altera FPGA firmware download module # # CONFIG_ALTERA_STAPL is not set # CONFIG_VMWARE_VMCI is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI_MOD=y CONFIG_RAID_ATTRS=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set CONFIG_SCSI_SAS_ATTRS=y CONFIG_SCSI_SAS_LIBSAS=y CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_SAS_HOST_SMP=y # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_ISCSI_BOOT_SYSFS is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_CXGB4_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_SCSI_BNX2X_FCOE is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_MVUMI is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_SCSI_ESAS2R is not set CONFIG_MEGARAID_NEWGEN=y # CONFIG_MEGARAID_MM is not set CONFIG_MEGARAID_LEGACY=m CONFIG_MEGARAID_SAS=m CONFIG_SCSI_MPT2SAS=m CONFIG_SCSI_MPT2SAS_MAX_SGE=128 # CONFIG_SCSI_MPT2SAS_LOGGING is not set CONFIG_SCSI_MPT3SAS=m CONFIG_SCSI_MPT3SAS_MAX_SGE=128 # CONFIG_SCSI_MPT3SAS_LOGGING is not set # CONFIG_SCSI_UFSHCD is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_VMWARE_PVSCSI is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_FCOE_FNIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set CONFIG_SCSI_ISCI=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_VIRTIO is not set # CONFIG_SCSI_CHELSIO_FCOE is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set # CONFIG_ATA_VERBOSE_ERROR is not set CONFIG_ATA_ACPI=y # CONFIG_SATA_ZPODD is not set # CONFIG_SATA_PMP is not set # # Controllers with non-SFF native interface # CONFIG_SATA_AHCI=y # CONFIG_SATA_AHCI_PLATFORM is not set # CONFIG_SATA_INIC162X is not set # CONFIG_SATA_ACARD_AHCI is not set # CONFIG_SATA_SIL24 is not set CONFIG_ATA_SFF=y # # SFF controllers with custom DMA interface # # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_SX4 is not set CONFIG_ATA_BMDMA=y # # SATA SFF controllers with BMDMA # CONFIG_ATA_PIIX=y # CONFIG_SATA_HIGHBANK is not set # CONFIG_SATA_MV is not set # CONFIG_SATA_NV is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_RCAR is not set # CONFIG_SATA_SIL is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_SVW is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # # PATA SFF controllers with BMDMA # # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_ATP867X is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CS5536 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_IT821X is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SCH is not set # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # # PIO-only SFF controllers # # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_PLATFORM is not set # CONFIG_PATA_RZ1000 is not set # # Generic fallback / legacy drivers # # CONFIG_PATA_ACPI is not set # CONFIG_ATA_GENERIC is not set # CONFIG_PATA_LEGACY is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_AUTODETECT=y # CONFIG_MD_LINEAR is not set # CONFIG_MD_RAID0 is not set CONFIG_MD_RAID1=y CONFIG_MD_RAID10=y CONFIG_MD_RAID456=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BCACHE is not set CONFIG_BLK_DEV_DM_BUILTIN=y CONFIG_BLK_DEV_DM=y # CONFIG_DM_DEBUG is not set # CONFIG_DM_CRYPT is not set CONFIG_DM_SNAPSHOT=y # CONFIG_DM_THIN_PROVISIONING is not set # CONFIG_DM_CACHE is not set # CONFIG_DM_MIRROR is not set # CONFIG_DM_RAID is not set # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set # CONFIG_DM_UEVENT is not set # CONFIG_DM_FLAKEY is not set # CONFIG_DM_VERITY is not set # CONFIG_DM_SWITCH is not set # CONFIG_TARGET_CORE is not set CONFIG_FUSION=y # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set CONFIG_FUSION_SAS=y CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_CTL is not set # CONFIG_FUSION_LOGGING is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set # CONFIG_FIREWIRE_NOSY is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y CONFIG_NET_CORE=y # CONFIG_BONDING is not set # CONFIG_DUMMY is not set # CONFIG_EQUALIZER is not set # CONFIG_NET_FC is not set # CONFIG_NET_TEAM is not set # CONFIG_MACVLAN is not set # CONFIG_VXLAN is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set CONFIG_TUN=y # CONFIG_VETH is not set CONFIG_VIRTIO_NET=y # CONFIG_NLMON is not set # CONFIG_ARCNET is not set # # CAIF transport drivers # CONFIG_VHOST_NET=m CONFIG_VHOST_RING=m CONFIG_VHOST=m # # Distributed Switch Architecture drivers # # CONFIG_NET_DSA_MV88E6XXX is not set # CONFIG_NET_DSA_MV88E6060 is not set # CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set # CONFIG_NET_DSA_MV88E6131 is not set # CONFIG_NET_DSA_MV88E6123_61_65 is not set CONFIG_ETHERNET=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_ADAPTEC is not set # CONFIG_NET_VENDOR_ALTEON is not set CONFIG_NET_VENDOR_AMD=y # CONFIG_AMD8111_ETH is not set # CONFIG_PCNET32 is not set CONFIG_NET_VENDOR_ARC=y # CONFIG_NET_VENDOR_ATHEROS is not set # CONFIG_NET_CADENCE is not set CONFIG_NET_VENDOR_BROADCOM=y # CONFIG_B44 is not set # CONFIG_BNX2 is not set # CONFIG_CNIC is not set CONFIG_TIGON3=y # CONFIG_BNX2X is not set # CONFIG_NET_VENDOR_BROCADE is not set # CONFIG_NET_CALXEDA_XGMAC is not set # CONFIG_NET_VENDOR_CHELSIO is not set # CONFIG_NET_VENDOR_CISCO is not set # CONFIG_DNET is not set # CONFIG_NET_VENDOR_DEC is not set # CONFIG_NET_VENDOR_DLINK is not set # CONFIG_NET_VENDOR_EMULEX is not set # CONFIG_NET_VENDOR_EXAR is not set # CONFIG_NET_VENDOR_HP is not set CONFIG_NET_VENDOR_INTEL=y # CONFIG_E100 is not set CONFIG_E1000=m CONFIG_E1000E=y CONFIG_IGB=y CONFIG_IGB_HWMON=y # CONFIG_IGBVF is not set # CONFIG_IXGB is not set # CONFIG_IXGBE is not set # CONFIG_IXGBEVF is not set # CONFIG_I40E is not set CONFIG_NET_VENDOR_I825XX=y # CONFIG_IP1000 is not set # CONFIG_JME is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MELLANOX is not set # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_MYRI is not set # CONFIG_FEALNX is not set # CONFIG_NET_VENDOR_NATSEMI is not set # CONFIG_NET_VENDOR_NVIDIA is not set # CONFIG_NET_VENDOR_OKI is not set # CONFIG_ETHOC is not set # CONFIG_NET_PACKET_ENGINE is not set # CONFIG_NET_VENDOR_QLOGIC is not set # CONFIG_NET_VENDOR_REALTEK is not set # CONFIG_SH_ETH is not set # CONFIG_NET_VENDOR_RDC is not set # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_SILAN is not set # CONFIG_NET_VENDOR_SIS is not set # CONFIG_SFC is not set # CONFIG_NET_VENDOR_SMSC is not set # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_SUN is not set # CONFIG_NET_VENDOR_TEHUTI is not set # CONFIG_NET_VENDOR_TI is not set # CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_NET_SB1000 is not set CONFIG_PHYLIB=y # # MII PHY device drivers # # CONFIG_AT803X_PHY is not set # CONFIG_AMD_PHY is not set # CONFIG_MARVELL_PHY is not set # CONFIG_DAVICOM_PHY is not set # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set # CONFIG_CICADA_PHY is not set # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_BCM87XX_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set # CONFIG_MICREL_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_RTL8152 is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_IPHETH is not set # CONFIG_WLAN is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # CONFIG_WAN is not set # CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # CONFIG_INPUT_SPARSEKMAP is not set # CONFIG_INPUT_MATRIXKMAP is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ADP5589 is not set CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_QT1070 is not set # CONFIG_KEYBOARD_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_TCA8418 is not set # CONFIG_KEYBOARD_LM8333 is not set # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_MCS is not set # CONFIG_KEYBOARD_MPR121 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_PS2_ALPS is not set # CONFIG_MOUSE_PS2_LOGIPS2PP is not set # CONFIG_MOUSE_PS2_SYNAPTICS is not set CONFIG_MOUSE_PS2_CYPRESS=y # CONFIG_MOUSE_PS2_LIFEBOOK is not set # CONFIG_MOUSE_PS2_TRACKPOINT is not set # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_CYAPA is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_MOUSE_SYNAPTICS_USB is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_SERIO_PS2MULT is not set # CONFIG_SERIO_ARC_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_TTY=y CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # CONFIG_N_GSM is not set # CONFIG_TRACE_SINK is not set # # KCopy # # CONFIG_KCOPY is not set CONFIG_DEVKMEM=y # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # CONFIG_SERIAL_8250_DW is not set # # Non-8250 serial port support # # CONFIG_SERIAL_MFD_HSU is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_SCCNXP is not set # CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set # CONFIG_SERIAL_PCH_UART is not set # CONFIG_SERIAL_ARC is not set # CONFIG_SERIAL_RP2 is not set # CONFIG_SERIAL_FSL_LPUART is not set # CONFIG_SERIAL_ST_ASC is not set # CONFIG_TTY_PRINTK is not set # CONFIG_VIRTIO_CONSOLE is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_HW_RANDOM_INTEL=y # CONFIG_HW_RANDOM_AMD is not set # CONFIG_HW_RANDOM_VIA is not set CONFIG_HW_RANDOM_VIRTIO=y # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_COMPAT is not set # CONFIG_I2C_CHARDEV is not set # CONFIG_I2C_MUX is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # # # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set CONFIG_I2C_I801=m CONFIG_I2C_ISCH=m CONFIG_I2C_ISMT=m # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # # ACPI drivers # # CONFIG_I2C_SCMI is not set # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_DESIGNWARE_PCI is not set # CONFIG_I2C_EG20T is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_PXA_PCI is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # # CONFIG_I2C_DIOLAN_U2C is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set # # Other I2C/SMBus bus drivers # # CONFIG_I2C_STUB is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_SPI is not set # CONFIG_HSI is not set # # PPS support # CONFIG_PPS=y # CONFIG_PPS_DEBUG is not set # # PPS clients support # # CONFIG_PPS_CLIENT_KTIMER is not set # CONFIG_PPS_CLIENT_LDISC is not set # CONFIG_PPS_CLIENT_GPIO is not set # # PPS generators support # # # PTP clock support # CONFIG_PTP_1588_CLOCK=y # # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # # CONFIG_PTP_1588_CLOCK_PCH is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIO_DEVRES=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_TEST_POWER is not set # CONFIG_BATTERY_DS2780 is not set # CONFIG_BATTERY_DS2781 is not set # CONFIG_BATTERY_DS2782 is not set # CONFIG_BATTERY_SBS is not set # CONFIG_BATTERY_BQ27x00 is not set # CONFIG_BATTERY_MAX17040 is not set # CONFIG_BATTERY_MAX17042 is not set # CONFIG_CHARGER_MAX8903 is not set # CONFIG_CHARGER_LP8727 is not set # CONFIG_CHARGER_BQ2415X is not set # CONFIG_CHARGER_SMB347 is not set # CONFIG_POWER_RESET is not set # CONFIG_POWER_AVS is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_HWMON_DEBUG_CHIP is not set # # Native drivers # # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7410 is not set # CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_K8TEMP is not set # CONFIG_SENSORS_K10TEMP is not set # CONFIG_SENSORS_FAM15H_POWER is not set # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS620 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_FSCHMD is not set # CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_G762 is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_HIH6130 is not set # CONFIG_SENSORS_HTU21 is not set CONFIG_SENSORS_CORETEMP=m # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_JC42 is not set # CONFIG_SENSORS_LINEAGE is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_LTC4151 is not set # CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_LTC4261 is not set # CONFIG_SENSORS_LM95234 is not set # CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_LM95245 is not set # CONFIG_SENSORS_MAX16065 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX1668 is not set # CONFIG_SENSORS_MAX197 is not set # CONFIG_SENSORS_MAX6639 is not set # CONFIG_SENSORS_MAX6642 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_MAX6697 is not set # CONFIG_SENSORS_MCP3021 is not set # CONFIG_SENSORS_NCT6775 is not set # CONFIG_SENSORS_NTC_THERMISTOR is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_PMBUS is not set # CONFIG_SENSORS_SHT21 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMM665 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_EMC1403 is not set # CONFIG_SENSORS_EMC2103 is not set # CONFIG_SENSORS_EMC6W201 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SCH56XX_COMMON is not set # CONFIG_SENSORS_ADS1015 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_INA209 is not set # CONFIG_SENSORS_INA2XX is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP102 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA_CPUTEMP is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83795 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_APPLESMC is not set # # ACPI drivers # # CONFIG_SENSORS_ACPI_POWER is not set # CONFIG_SENSORS_ATK0110 is not set CONFIG_THERMAL=y CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set # CONFIG_THERMAL_GOV_FAIR_SHARE is not set CONFIG_THERMAL_GOV_STEP_WISE=y # CONFIG_THERMAL_GOV_USER_SPACE is not set # CONFIG_CPU_THERMAL is not set # CONFIG_THERMAL_EMULATION is not set CONFIG_INTEL_POWERCLAMP=y # # Texas Instruments thermal drivers # # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set CONFIG_BCMA_POSSIBLE=y # # Broadcom specific AMBA # # CONFIG_BCMA is not set # # Multifunction device drivers # CONFIG_MFD_CORE=m # CONFIG_MFD_CS5535 is not set # CONFIG_MFD_AS3711 is not set # CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_CROS_EC is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_DA9052_I2C is not set # CONFIG_MFD_DA9055 is not set # CONFIG_MFD_DA9063 is not set # CONFIG_MFD_MC13XXX_I2C is not set # CONFIG_HTC_PASIC3 is not set CONFIG_LPC_ICH=m CONFIG_LPC_SCH=m # CONFIG_MFD_JANZ_CMODIO is not set # CONFIG_MFD_KEMPLD is not set # CONFIG_MFD_88PM800 is not set # CONFIG_MFD_88PM805 is not set # CONFIG_MFD_88PM860X is not set # CONFIG_MFD_MAX77686 is not set # CONFIG_MFD_MAX77693 is not set # CONFIG_MFD_MAX8907 is not set # CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_MAX8997 is not set # CONFIG_MFD_MAX8998 is not set # CONFIG_MFD_VIPERBOARD is not set # CONFIG_MFD_RETU is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_RDC321X is not set # CONFIG_MFD_RTSX_PCI is not set # CONFIG_MFD_RC5T583 is not set # CONFIG_MFD_SEC_CORE is not set # CONFIG_MFD_SI476X_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_SMSC is not set # CONFIG_ABX500_CORE is not set # CONFIG_MFD_STMPE is not set # CONFIG_MFD_SYSCON is not set # CONFIG_MFD_TI_AM335X_TSCADC is not set # CONFIG_MFD_LP8788 is not set # CONFIG_MFD_PALMAS is not set # CONFIG_TPS6105X is not set # CONFIG_TPS6507X is not set # CONFIG_MFD_TPS65090 is not set # CONFIG_MFD_TPS65217 is not set # CONFIG_MFD_TPS6586X is not set # CONFIG_MFD_TPS80031 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_TWL6040_CORE is not set # CONFIG_MFD_WL1273_CORE is not set # CONFIG_MFD_LM3533 is not set # CONFIG_MFD_TC3589X is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_VX855 is not set # CONFIG_MFD_ARIZONA_I2C is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X_I2C is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8994 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # # Graphics support # CONFIG_AGP=y # CONFIG_AGP_INTEL is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_VGA_SWITCHEROO is not set # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_EXYNOS_VIDEO is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set # # HID support # CONFIG_HID=y # CONFIG_HID_BATTERY_STRENGTH is not set # CONFIG_HIDRAW is not set # CONFIG_UHID is not set CONFIG_HID_GENERIC=y # # Special HID drivers # # CONFIG_HID_A4TECH is not set # CONFIG_HID_ACRUX is not set # CONFIG_HID_APPLE is not set # CONFIG_HID_APPLEIR is not set # CONFIG_HID_AUREAL is not set # CONFIG_HID_BELKIN is not set # CONFIG_HID_CHERRY is not set # CONFIG_HID_CHICONY is not set # CONFIG_HID_CYPRESS is not set # CONFIG_HID_DRAGONRISE is not set # CONFIG_HID_EMS_FF is not set # CONFIG_HID_ELECOM is not set # CONFIG_HID_ELO is not set # CONFIG_HID_EZKEY is not set # CONFIG_HID_HOLTEK is not set # CONFIG_HID_HUION is not set # CONFIG_HID_KEYTOUCH is not set # CONFIG_HID_KYE is not set # CONFIG_HID_UCLOGIC is not set # CONFIG_HID_WALTOP is not set # CONFIG_HID_GYRATION is not set # CONFIG_HID_ICADE is not set # CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LCPOWER is not set # CONFIG_HID_LENOVO_TPKBD is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MAGICMOUSE is not set # CONFIG_HID_MICROSOFT is not set # CONFIG_HID_MONTEREY is not set # CONFIG_HID_MULTITOUCH is not set # CONFIG_HID_NTRIG is not set # CONFIG_HID_ORTEK is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_PICOLCD is not set # CONFIG_HID_PRIMAX is not set # CONFIG_HID_ROCCAT is not set # CONFIG_HID_SAITEK is not set # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SPEEDLINK is not set # CONFIG_HID_STEELSERIES is not set # CONFIG_HID_SUNPLUS is not set # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TIVO is not set # CONFIG_HID_TOPSEED is not set # CONFIG_HID_THRUSTMASTER is not set # CONFIG_HID_XINMO is not set # CONFIG_HID_ZEROPLUS is not set # CONFIG_HID_ZYDACRON is not set # CONFIG_HID_SENSOR_HUB is not set # # USB HID support # CONFIG_USB_HID=y # CONFIG_HID_PID is not set CONFIG_USB_HIDDEV=y # # I2C HID support # # CONFIG_I2C_HID is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEFAULT_PERSIST=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # CONFIG_USB_MON is not set # CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_EHCI_PCI=y # CONFIG_USB_EHCI_HCD_PLATFORM is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_FUSBH200_HCD is not set # CONFIG_USB_FOTG210_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PCI=y # CONFIG_USB_OHCI_HCD_PLATFORM is not set CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HCD_TEST_MODE is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_REALTEK is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_STORAGE_ENE_UB6250 is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_DWC3 is not set # CONFIG_USB_CHIPIDEA is not set # # USB port drivers # CONFIG_USB_SERIAL=m # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_SIMPLE is not set # CONFIG_USB_SERIAL_AIRCABLE is not set # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_CP210X is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_F81232 is not set # CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set # CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_METRO is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set # CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_OTI6858 is not set # CONFIG_USB_SERIAL_QCAUX is not set # CONFIG_USB_SERIAL_QUALCOMM is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set # CONFIG_USB_SERIAL_SYMBOL is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_XSENS_MT is not set # CONFIG_USB_SERIAL_WISHBONE is not set # CONFIG_USB_SERIAL_ZTE is not set # CONFIG_USB_SERIAL_SSU100 is not set # CONFIG_USB_SERIAL_QT2 is not set # CONFIG_USB_SERIAL_DEBUG is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_EHSET_TEST_FIXTURE is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_YUREX is not set # CONFIG_USB_EZUSB_FX2 is not set # CONFIG_USB_HSIC_USB3503 is not set # # USB Physical Layer drivers # # CONFIG_USB_PHY is not set # CONFIG_NOP_USB_XCEIV is not set # CONFIG_AM335X_PHY_USB is not set # CONFIG_SAMSUNG_USB2PHY is not set # CONFIG_SAMSUNG_USB3PHY is not set # CONFIG_USB_ISP1301 is not set # CONFIG_USB_RCAR_PHY is not set # CONFIG_USB_GADGET is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_SYSTOHC=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_DS3232 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_ISL12022 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF2127 is not set # CONFIG_RTC_DRV_PCF8523 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set # CONFIG_RTC_DRV_RX8025 is not set # CONFIG_RTC_DRV_EM3027 is not set # CONFIG_RTC_DRV_RV3029C2 is not set # # SPI RTC drivers # # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # CONFIG_RTC_DRV_DS2404 is not set # # on-CPU RTC drivers # # CONFIG_RTC_DRV_MOXART is not set # # HID Sensor RTC drivers # # CONFIG_RTC_DRV_HID_SENSOR_TIME is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set CONFIG_VIRT_DRIVERS=y CONFIG_VIRTIO=y # # Virtio drivers # CONFIG_VIRTIO_PCI=y CONFIG_VIRTIO_BALLOON=y CONFIG_VIRTIO_MMIO=y # CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set # # Microsoft Hyper-V guest support # # CONFIG_STAGING is not set CONFIG_X86_PLATFORM_DEVICES=y # CONFIG_ACERHDF is not set # CONFIG_ASUS_LAPTOP is not set # CONFIG_CHROMEOS_LAPTOP is not set # CONFIG_FUJITSU_TABLET is not set # CONFIG_HP_ACCEL is not set # CONFIG_THINKPAD_ACPI is not set # CONFIG_SENSORS_HDAPS is not set # CONFIG_INTEL_MENLOW is not set # CONFIG_EEEPC_LAPTOP is not set # CONFIG_ACPI_WMI is not set # CONFIG_TOPSTAR_LAPTOP is not set # CONFIG_TOSHIBA_BT_RFKILL is not set # CONFIG_ACPI_CMPC is not set CONFIG_INTEL_IPS=y # CONFIG_IBM_RTL is not set # CONFIG_XO15_EBOOK is not set # CONFIG_SAMSUNG_Q10 is not set CONFIG_INTEL_RST=y # CONFIG_INTEL_SMARTCONNECT is not set # CONFIG_PVPANIC is not set # # Hardware Spinlock drivers # CONFIG_CLKEVT_I8253=y CONFIG_CLKBLD_I8253=y # CONFIG_MAILBOX is not set # CONFIG_IOMMU_SUPPORT is not set # # Remoteproc drivers # # CONFIG_STE_MODEM_RPROC is not set # # Rpmsg drivers # # CONFIG_PM_DEVFREQ is not set # CONFIG_EXTCON is not set # CONFIG_MEMORY is not set # CONFIG_IIO is not set # CONFIG_NTB is not set # CONFIG_VME_BUS is not set # CONFIG_PWM is not set # CONFIG_IPACK_BUS is not set # CONFIG_RESET_CONTROLLER is not set # CONFIG_FMC is not set # # Firmware Drivers # # CONFIG_EDD is not set # CONFIG_FIRMWARE_MEMMAP is not set # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y # CONFIG_DMI_SYSFS is not set # CONFIG_ISCSI_IBFT_FIND is not set # CONFIG_GOOGLE_FIRMWARE is not set # # EFI (Extensible Firmware Interface) Support # # CONFIG_EFI_VARS is not set # # File systems # CONFIG_DCACHE_WORD_ACCESS=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set CONFIG_EXT4_FS=y # CONFIG_EXT4_FS_POSIX_ACL is not set # CONFIG_EXT4_FS_SECURITY is not set # CONFIG_EXT4_DEBUG is not set CONFIG_JBD=y CONFIG_JBD2=y # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_XFS_FS=y CONFIG_XFS_QUOTA=y # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set # CONFIG_XFS_WARN is not set # CONFIG_XFS_DEBUG is not set # CONFIG_GFS2_FS is not set CONFIG_BTRFS_FS=y CONFIG_BTRFS_FS_POSIX_ACL=y # CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set # CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set # CONFIG_BTRFS_DEBUG is not set # CONFIG_BTRFS_ASSERT is not set # CONFIG_NILFS2_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=y CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_FANOTIFY=y # CONFIG_QUOTA is not set # CONFIG_QUOTA_NETLINK_INTERFACE is not set CONFIG_QUOTACTL=y CONFIG_QUOTACTL_COMPAT=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set CONFIG_GENERIC_ACL=y # # Caches # # CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_ZISOFS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # # CONFIG_MSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set # CONFIG_MISC_FILESYSTEMS is not set # CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_MAC_ROMAN is not set # CONFIG_NLS_MAC_CELTIC is not set # CONFIG_NLS_MAC_CENTEURO is not set # CONFIG_NLS_MAC_CROATIAN is not set # CONFIG_NLS_MAC_CYRILLIC is not set # CONFIG_NLS_MAC_GAELIC is not set # CONFIG_NLS_MAC_GREEK is not set # CONFIG_NLS_MAC_ICELAND is not set # CONFIG_NLS_MAC_INUIT is not set # CONFIG_NLS_MAC_ROMANIAN is not set # CONFIG_NLS_MAC_TURKISH is not set # CONFIG_NLS_UTF8 is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # # printk and dmesg options # # CONFIG_PRINTK_TIME is not set CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 # CONFIG_BOOT_PRINTK_DELAY is not set # # Compile-time checks and compiler options # # CONFIG_DEBUG_INFO is not set # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=2048 CONFIG_STRIP_ASM_SYMS=y # CONFIG_READABLE_ASM is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_SECTION_MISMATCH is not set CONFIG_ARCH_WANT_FRAME_POINTERS=y # CONFIG_FRAME_POINTER is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_MAGIC_SYSRQ is not set CONFIG_DEBUG_KERNEL=y # # Memory Debugging # # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUG_OBJECTS is not set CONFIG_HAVE_DEBUG_KMEMLEAK=y # CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_VIRTUAL is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set CONFIG_HAVE_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACKOVERFLOW is not set CONFIG_HAVE_ARCH_KMEMCHECK=y # CONFIG_DEBUG_SHIRQ is not set # # Debug Lockups and Hangs # # CONFIG_LOCKUP_DETECTOR is not set # CONFIG_DETECT_HUNG_TASK is not set # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # # Lock Debugging (spinlocks, mutexes, etc...) # # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_ATOMIC_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_CREDENTIALS is not set # # RCU Debugging # # CONFIG_SPARSE_RCU_POINTER is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_RCU_CPU_STALL_TIMEOUT=21 # CONFIG_RCU_CPU_STALL_INFO is not set # CONFIG_RCU_TRACE is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_NOTIFIER_ERROR_INJECTION is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y # CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_FENTRY=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # # Runtime Testing # # CONFIG_TEST_LIST_SORT is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_RBTREE_TEST is not set # CONFIG_INTERVAL_TREE_TEST is not set # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_ASYNC_RAID6_TEST is not set # CONFIG_TEST_STRING_HELPERS is not set # CONFIG_TEST_KSTRTOX is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_STRICT_DEVMEM is not set # CONFIG_X86_VERBOSE_BOOTUP is not set # CONFIG_EARLY_PRINTK is not set # CONFIG_X86_PTDUMP is not set # CONFIG_DEBUG_RODATA is not set # CONFIG_DEBUG_SET_MODULE_RONX is not set # CONFIG_DEBUG_NX_TEST is not set CONFIG_DOUBLEFAULT=y # CONFIG_DEBUG_TLBFLUSH is not set # CONFIG_IOMMU_STRESS is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 # CONFIG_CPA_DEBUG is not set # CONFIG_OPTIMIZE_INLINING is not set # CONFIG_DEBUG_NMI_SELFTEST is not set # CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY_DMESG_RESTRICT is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_DEFAULT_SECURITY="" CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y CONFIG_ASYNC_PQ=y CONFIG_ASYNC_RAID6_RECOV=y CONFIG_CRYPTO=y # # Crypto core or helper # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_RNG2=m CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_PCOMP2=m # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_USER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_PCRYPT is not set # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set # # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_SEQIV is not set # # Block modes # # CONFIG_CRYPTO_CBC is not set # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set # CONFIG_CRYPTO_ECB is not set # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_XTS is not set # # Hash modes # # CONFIG_CRYPTO_CMAC is not set # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRC32C_INTEL=y # CONFIG_CRYPTO_CRC32 is not set # CONFIG_CRYPTO_CRC32_PCLMUL is not set # CONFIG_CRYPTO_CRCT10DIF is not set # CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA1_SSSE3 is not set # CONFIG_CRYPTO_SHA256_SSSE3 is not set # CONFIG_CRYPTO_SHA512_SSSE3 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set # # Ciphers # CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_AES_X86_64 is not set # CONFIG_CRYPTO_AES_NI_INTEL is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_BLOWFISH_X86_64 is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAMELLIA_X86_64 is not set # CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set # CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SALSA20_X86_64 is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set # CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set # CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_TWOFISH_X86_64 is not set # CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set # CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set # # Compression # # CONFIG_CRYPTO_DEFLATE is not set CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_LZ4 is not set # CONFIG_CRYPTO_LZ4HC is not set # # Random Number Generation # CONFIG_CRYPTO_ANSI_CPRNG=m # CONFIG_CRYPTO_USER_API_HASH is not set # CONFIG_CRYPTO_USER_API_SKCIPHER is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_PADLOCK is not set CONFIG_HAVE_KVM=y CONFIG_HAVE_KVM_IRQCHIP=y CONFIG_HAVE_KVM_IRQ_ROUTING=y CONFIG_HAVE_KVM_EVENTFD=y CONFIG_KVM_APIC_ARCHITECTURE=y CONFIG_KVM_MMIO=y CONFIG_KVM_ASYNC_PF=y CONFIG_HAVE_KVM_MSI=y CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y CONFIG_VIRTUALIZATION=y CONFIG_KVM=y CONFIG_KVM_INTEL=m # CONFIG_KVM_AMD is not set # CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_RAID6_PQ=y CONFIG_BITREVERSE=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GENERIC_NET_UTILS=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_IO=y CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y CONFIG_CMPXCHG_LOCKREF=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=y # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC32_SELFTEST is not set CONFIG_CRC32_SLICEBY8=y # CONFIG_CRC32_SLICEBY4 is not set # CONFIG_CRC32_SARWATE is not set # CONFIG_CRC32_BIT is not set # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=y # CONFIG_CRC8 is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_XZ_DEC=y # CONFIG_XZ_DEC_X86 is not set # CONFIG_XZ_DEC_POWERPC is not set # CONFIG_XZ_DEC_IA64 is not set # CONFIG_XZ_DEC_ARM is not set # CONFIG_XZ_DEC_ARMTHUMB is not set # CONFIG_XZ_DEC_SPARC is not set # CONFIG_XZ_DEC_BCJ is not set # CONFIG_XZ_DEC_TEST is not set CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_CHECK_SIGNATURE=y CONFIG_CPU_RMAP=y CONFIG_DQL=y CONFIG_NLATTR=y CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y # CONFIG_AVERAGE is not set # CONFIG_CORDIC is not set # CONFIG_DDR is not set CONFIG_UCS2_STRING=y ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-11 9:34 ` Stefan G. Weichinger @ 2014-06-11 10:14 ` thegeezer 2014-06-11 10:27 ` thegeezer 2014-06-11 10:34 ` Stefan G. Weichinger 0 siblings, 2 replies; 30+ messages in thread From: thegeezer @ 2014-06-11 10:14 UTC (permalink / raw To: gentoo-user On 06/11/2014 10:34 AM, Stefan G. Weichinger wrote: > Am 11.06.2014 11:19, schrieb thegeezer: > >> Hi Stefan, >> block size / stripe size mismatches only really penalise random io, if >> you are trying to use dd and have slow speeds this would suggest >> something else is awry. >> I don't know the c600 rad chip personally, but in trying to google it it >> appears to be a motherboard based raid device? is it a real raid or >> fakeraid? >> >> I'm a little confused over your setup to help. i'm sorry if there is >> duplication but it would be useful to have all info in one hit rather >> than trying to piece it together from all your messages. > OK, will do ... > > >> 1. please can you list your hardware raid config. I'm looking for the >> physical disk sizes, the virtual disks and their raid types. do you have >> cache enabled on the raid card, is there a background scrub or anything >> like that running? do you have active seek/ prefetch configured ? >> parity size being 50% of total size is just odd to me - but i guess >> these are mirrors ? but it says raid-level3 --- just odd, most setups >> use raid0(not raid) raid1(mirror) raid5(parity stripe) raid6 (double >> parity stripe) or combinations, like 50.. raid3 is allocating a single >> disk to parity but is very rarely used. > Basically 3 RAID-6 hw-raids over 6 SAS hdds. OK so i'm confused again. RAID6 requires minimum of 4 drives. if you have 3 raid6's then you would need 12 drives (coffee hasn't quite activated in me yet so my maths may not be right) or do you have essentially the first part of each of the six drives be virtual disk 1, the second part of each of the six drives virtual disk 2 and the third part be virtual disk 3 -- if this is the case bear in mind that the slowest part of the disk is the end of the disk -- so you are essentially hobbling your virtual disk3 but only a little, instead of being around 150MB/sec it might run at 80. you might also like to try a simple test of the following (yes lvs count as block devices) # hdparm -t /dev/sda # hdparm -t /dev/sdb # hdparm -t /dev/sdc # hdparm -t /dev/vg01/winserver_disk0 # hdparm -t /dev/vg01/amhold > I don't know where this RAID-3 term comes from -> > > # megacli -LDInfo -Lall -aALL > > > Adapter 0 -- Virtual Drive Information: > Virtual Drive: 0 (Target Id: 0) > Name :root > RAID Level : Primary-6, Secondary-3, RAID Level Qualifier-3 > Size : 500.0 GB > Sector Size : 512 > Is VD emulated : No > Parity Size : 250.0 GB > State : Optimal > Strip Size : 256 KB > Number Of Drives : 6 > Span Depth : 1 > Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if > Bad BBU > Current Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if > Bad BBU > Default Access Policy: Read/Write > Current Access Policy: Read/Write > Disk Cache Policy : Disabled > Encryption Type : None > Bad Blocks Exist: No > Is VD Cached: No > > > Virtual Drive: 1 (Target Id: 1) > Name :swap > RAID Level : Primary-6, Secondary-3, RAID Level Qualifier-3 > Size : 8.0 GB > Sector Size : 512 > Is VD emulated : No > Parity Size : 4.0 GB > State : Optimal > Strip Size : 64 KB > Number Of Drives : 6 > Span Depth : 1 > Default Cache Policy: WriteBack, ReadAheadNone, Cached, No Write Cache > if Bad BBU > Current Cache Policy: WriteBack, ReadAheadNone, Cached, No Write Cache > if Bad BBU > Default Access Policy: Read/Write > Current Access Policy: Read/Write > Disk Cache Policy : Disabled > Encryption Type : None > Bad Blocks Exist: No > Is VD Cached: No > > > Virtual Drive: 2 (Target Id: 2) > Name :lvm > RAID Level : Primary-6, Secondary-3, RAID Level Qualifier-3 > Size : 1.321 TB > Sector Size : 512 > Is VD emulated : No > Parity Size : 676.5 GB > State : Optimal > Strip Size : 64 KB > Number Of Drives : 6 > Span Depth : 1 > Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if > Bad BBU > Current Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if > Bad BBU > Default Access Policy: Read/Write > Current Access Policy: Read/Write > Disk Cache Policy : Disabled > Encryption Type : None > Bad Blocks Exist: No > Is VD Cached: No > > > > >> 2. how many other devices are actively doing IO? do you have any other >> raid cards/io cards of note that might be clashign on the board. > The Intel C600 Controller seems to only run the LTO-4-drive in the > server while the > > LSI Logic / Symbios Logic MegaRAID SAS 2108 > > runs the 6 hard disks. > > # lspci > 00:00.0 Host bridge: Intel Corporation Xeon E5/Core i7 DMI2 (rev 07) > 00:01.0 PCI bridge: Intel Corporation Xeon E5/Core i7 IIO PCI Express > Root Port 1a (rev 07) > 00:01.1 PCI bridge: Intel Corporation Xeon E5/Core i7 IIO PCI Express > Root Port 1b (rev 07) > 00:03.0 PCI bridge: Intel Corporation Xeon E5/Core i7 IIO PCI Express > Root Port 3a in PCI Express Mode (rev 07) > 00:05.0 System peripheral: Intel Corporation Xeon E5/Core i7 Address > Map, VTd_Misc, System Management (rev 07) > 00:05.2 System peripheral: Intel Corporation Xeon E5/Core i7 Control > Status and Global Errors (rev 07) > 00:05.4 PIC: Intel Corporation Xeon E5/Core i7 I/O APIC (rev 07) > 00:11.0 PCI bridge: Intel Corporation C600/X79 series chipset PCI > Express Virtual Root Port (rev 05) > 00:1a.0 USB controller: Intel Corporation C600/X79 series chipset USB2 > Enhanced Host Controller #2 (rev 05) > 00:1c.0 PCI bridge: Intel Corporation C600/X79 series chipset PCI > Express Root Port 1 (rev b5) > 00:1c.4 PCI bridge: Intel Corporation C600/X79 series chipset PCI > Express Root Port 5 (rev b5) > 00:1c.5 PCI bridge: Intel Corporation C600/X79 series chipset PCI > Express Root Port 6 (rev b5) > 00:1c.7 PCI bridge: Intel Corporation C600/X79 series chipset PCI > Express Root Port 8 (rev b5) > 00:1d.0 USB controller: Intel Corporation C600/X79 series chipset USB2 > Enhanced Host Controller #1 (rev 05) > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) > 00:1f.0 ISA bridge: Intel Corporation C600/X79 series chipset LPC > Controller (rev 05) > 00:1f.2 SATA controller: Intel Corporation C600/X79 series chipset > 6-Port SATA AHCI Controller (rev 05) > 00:1f.3 SMBus: Intel Corporation C600/X79 series chipset SMBus Host > Controller (rev 05) > 02:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2108 > [Liberator] (rev 05) > 04:00.0 Serial Attached SCSI controller: Intel Corporation C604/X79 > series chipset 4-Port SATA/SAS Storage Control Unit (rev 05) > 04:00.3 SMBus: Intel Corporation C600/X79 series chipset SMBus > Controller 0 (rev 05) > 06:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network > Connection > 07:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network > Connection > 08:00.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA > G200e [Pilot] ServerEngines (SEP1) (rev 05) > ff:08.0 System peripheral: Intel Corporation Xeon E5/Core i7 QPI Link 0 > (rev 07) > ff:08.3 System peripheral: Intel Corporation Xeon E5/Core i7 QPI Link > Reut 0 (rev 07) > ff:08.4 System peripheral: Intel Corporation Xeon E5/Core i7 QPI Link > Reut 0 (rev 07) > ff:09.0 System peripheral: Intel Corporation Xeon E5/Core i7 QPI Link 1 > (rev 07) > ff:09.3 System peripheral: Intel Corporation Xeon E5/Core i7 QPI Link > Reut 1 (rev 07) > ff:09.4 System peripheral: Intel Corporation Xeon E5/Core i7 QPI Link > Reut 1 (rev 07) > ff:0a.0 System peripheral: Intel Corporation Xeon E5/Core i7 Power > Control Unit 0 (rev 07) > ff:0a.1 System peripheral: Intel Corporation Xeon E5/Core i7 Power > Control Unit 1 (rev 07) > ff:0a.2 System peripheral: Intel Corporation Xeon E5/Core i7 Power > Control Unit 2 (rev 07) > ff:0a.3 System peripheral: Intel Corporation Xeon E5/Core i7 Power > Control Unit 3 (rev 07) > ff:0b.0 System peripheral: Intel Corporation Xeon E5/Core i7 Interrupt > Control Registers (rev 07) > ff:0b.3 System peripheral: Intel Corporation Xeon E5/Core i7 Semaphore > and Scratchpad Configuration Registers (rev 07) > ff:0c.0 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast > Register 0 (rev 07) > ff:0c.1 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast > Register 0 (rev 07) > ff:0c.6 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated > Memory Controller System Address Decoder 0 (rev 07) > ff:0c.7 System peripheral: Intel Corporation Xeon E5/Core i7 System > Address Decoder (rev 07) > ff:0d.0 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast > Register 0 (rev 07) > ff:0d.1 System peripheral: Intel Corporation Xeon E5/Core i7 Unicast > Register 0 (rev 07) > ff:0d.6 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated > Memory Controller System Address Decoder 1 (rev 07) > ff:0e.0 System peripheral: Intel Corporation Xeon E5/Core i7 Processor > Home Agent (rev 07) > ff:0e.1 Performance counters: Intel Corporation Xeon E5/Core i7 > Processor Home Agent Performance Monitoring (rev 07) > ff:0f.0 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated > Memory Controller Registers (rev 07) > ff:0f.1 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated > Memory Controller RAS Registers (rev 07) > ff:0f.2 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated > Memory Controller Target Address Decoder 0 (rev 07) > ff:0f.3 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated > Memory Controller Target Address Decoder 1 (rev 07) > ff:0f.4 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated > Memory Controller Target Address Decoder 2 (rev 07) > ff:0f.5 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated > Memory Controller Target Address Decoder 3 (rev 07) > ff:0f.6 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated > Memory Controller Target Address Decoder 4 (rev 07) > ff:10.0 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated > Memory Controller Channel 0-3 Thermal Control 0 (rev 07) > ff:10.1 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated > Memory Controller Channel 0-3 Thermal Control 1 (rev 07) > ff:10.2 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated > Memory Controller ERROR Registers 0 (rev 07) > ff:10.3 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated > Memory Controller ERROR Registers 1 (rev 07) > ff:10.5 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated > Memory Controller Channel 0-3 Thermal Control 3 (rev 07) > ff:10.6 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated > Memory Controller ERROR Registers 2 (rev 07) > ff:10.7 System peripheral: Intel Corporation Xeon E5/Core i7 Integrated > Memory Controller ERROR Registers 3 (rev 07) > ff:11.0 System peripheral: Intel Corporation Xeon E5/Core i7 DDRIO (rev 07) > ff:13.0 System peripheral: Intel Corporation Xeon E5/Core i7 R2PCIe (rev 07) > ff:13.1 Performance counters: Intel Corporation Xeon E5/Core i7 Ring to > PCI Express Performance Monitor (rev 07) > ff:13.4 Performance counters: Intel Corporation Xeon E5/Core i7 > QuickPath Interconnect Agent Ring Registers (rev 07) > ff:13.5 Performance counters: Intel Corporation Xeon E5/Core i7 Ring to > QuickPath Interconnect Link 0 Performance Monitor (rev 07) > ff:13.6 System peripheral: Intel Corporation Xeon E5/Core i7 Ring to > QuickPath Interconnect Link 1 Performance Monitor (rev 07) > i notice the core i7 only now. have you disabled turbo boost in the bios ? this is great for a desktop but awful for a server as it disables all those extra cores for a single busy thread >> 3. do you have active I/O when doing your performance tests? if you have >> several virtual machines running depending on what they are doing they >> will crucify your access. > My testing was done with all the VMs stopped! eek > > >> 4. are you using any type of CGroups ? > Yes. systemd needs them. > I attach the kernel-config. ok it would be useful to know how the storage cgroups are configured, as this will also hobble things. cgroups are a great way of limiting or guaranteeing performance. by default i believe systemd will aim for user interactivity, but you want to change that to be more balanced. maybe some else can suggest how best to configure systemd cgroups. meanwhile can you # tree /sys/fs/cgroup/ >> 5. i'm also confused over your LVM config. please can you send the >> output of "vgs" "pvs" and "lvs -a -o +devices" > /dev/sdc is the third hardware raid array listed above and used as PV > for the VG vg01 -> > > # pvs > PV VG Fmt Attr PSize PFree > /dev/sdc vg01 lvm2 a-- 1,32t 708,86g > > # vgs > VG #PV #LV #SN Attr VSize VFree > vg01 1 2 0 wz--n- 1,32t 708,86g > > # lvs -a -o +devices > LV VG Attr LSize Pool Origin Data% Move Log > Cpy%Sync Convert Devices > amhold vg01 -wi-ao---- 400,00g > /dev/sdc(0) > winserver_disk0 vg01 -wi-ao---- 244,14g > /dev/sdc(102400) > > >> 6. please also send the output of "mount" > # mount > proc on /proc type proc (rw,nosuid,nodev,noexec,relatime) > sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) > devtmpfs on /dev type devtmpfs > (rw,nosuid,size=8203540k,nr_inodes=2050885,mode=755) > tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) > devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620) > tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755) > tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755) > cgroup on /sys/fs/cgroup/systemd type cgroup > (rw,nosuid,nodev,noexec,relatime,release_agent=/usr/lib/systemd/systemd-cgroups-agent,name=systemd) > cgroup on /sys/fs/cgroup/cpuset type cgroup > (rw,nosuid,nodev,noexec,relatime,cpuset) > cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup > (rw,nosuid,nodev,noexec,relatime,cpuacct,cpu) > cgroup on /sys/fs/cgroup/devices type cgroup > (rw,nosuid,nodev,noexec,relatime,devices) > /dev/sda on / type btrfs (rw,noatime,space_cache) > mqueue on /dev/mqueue type mqueue (rw,relatime) > tmpfs on /tmp type tmpfs (rw) > tmpfs on /var/tmp/portage type tmpfs (rw,relatime) > /dev/mapper/vg01-amhold on /mnt/amhold type xfs > (rw,noatime,attr2,inode64,noquota) > tmpfs on /run/user/0 type tmpfs > (rw,nosuid,nodev,relatime,size=1641324k,mode=700) > /dev/sda on /mnt/btrfs_windows type btrfs (rw,noatime,space_cache) a little odd that you have no partitions but otherwise minor. > > the last line is meant as a target directory for dumping the content of > the LV winserver_disk0 ... it is a btrfs subvolume mounted with > compression turned OFF. > if you consider that your drives are on the same raidset, they are all essentially "one disk". copying from one disk to the same disk you are halving the speed it will work at. > >> 7. do you have atop or iotop that you can use to monitor performance - >> specifically we are looking for disk ios per device and disk latency per >> device. both before and during you are trying to run your backup. > I will install atop and check ... > >> this should give us a better idea of where the problems lay. > Thanks so far! > > Stefan > just some extra thoughts ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-11 10:14 ` thegeezer @ 2014-06-11 10:27 ` thegeezer 2014-06-11 10:34 ` Stefan G. Weichinger 1 sibling, 0 replies; 30+ messages in thread From: thegeezer @ 2014-06-11 10:27 UTC (permalink / raw To: gentoo-user On 06/11/2014 11:14 AM, thegeezer wrote: > just some extra thoughts *cough* yeah i meant to keep typing! the extra thoughts are that the better way of doing this would be to create up RAID1 physicaldisks1+2 RAID6 physicaldisks3,4,5,6 then put lvm on there as vg01 with two PVs, one on the raid1 virtualdisk and one on the raid6 virtualdisk you can then create new LVs and choose to put them on fast or slow (raid1 or raid6) you can then have system and archive data on raid6 and VM's on fast. of course you could always have all 6 disks setup for raid0+1 and then it woudl all be very fast the general gist of what i'm trying to say is have the hardware raid card do the hardware raid across the disks as required, then have LVM do the partitioning of the storage. at the moment you have the hardware raid doing the partitioning. also i'd always recommend you have _inside the case_ a hotspare configured to be global spare ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-11 10:14 ` thegeezer 2014-06-11 10:27 ` thegeezer @ 2014-06-11 10:34 ` Stefan G. Weichinger 2014-06-11 10:41 ` thegeezer 1 sibling, 1 reply; 30+ messages in thread From: Stefan G. Weichinger @ 2014-06-11 10:34 UTC (permalink / raw To: gentoo-user Am 11.06.2014 12:14, schrieb thegeezer: >> Basically 3 RAID-6 hw-raids over 6 SAS hdds. > > OK so i'm confused again. RAID6 requires minimum of 4 drives. > if you have 3 raid6's then you would need 12 drives (coffee hasn't quite > activated in me yet so my maths may not be right) > or do you have essentially the first part of each of the six drives be > virtual disk 1, the second part of each of the six drives virtual disk 2 > and the third part be virtual disk 3 -- if this is the case bear in mind > that the slowest part of the disk is the end of the disk -- so you are > essentially hobbling your virtual disk3 but only a little, instead of > being around 150MB/sec it might run at 80. I'd be happy to see 80 ! Ran atop now while dd-ing stuff to an external disk and got ~1MB/s for 2.5GB of data. (this is even too slow for USB ...) I am unsure what to post here from atop ... ? To the initial question: Yes, imagine the six disks "split" or partitioned at the level of the hardware raid controller (as you described above). > you might also like to try a simple test of the following (yes lvs count > as block devices) > # hdparm -t /dev/sda > # hdparm -t /dev/sdb > # hdparm -t /dev/sdc > # hdparm -t /dev/vg01/winserver_disk0 > # hdparm -t /dev/vg01/amhold everything around 380 MB/s ... only ~350 MB/s for /dev/vg01/winserver_disk0 (which still is nice) > i notice the core i7 only now. have you disabled turbo boost in the bios ? > this is great for a desktop but awful for a server as it disables all > those extra cores for a single busy thread I checked BIOS settings yesterday and don't remember a turbo boost option. I will check once more. > cgroups are a great way of limiting or guaranteeing performance. by > default i believe systemd will aim for user interactivity, but you want > to change that to be more balanced. > maybe some else can suggest how best to configure systemd cgroups. > meanwhile can you > # tree /sys/fs/cgroup/ # !tr tree /sys/fs/cgroup/ /sys/fs/cgroup/ ├── cpu -> cpu,cpuacct ├── cpuacct -> cpu,cpuacct ├── cpu,cpuacct │ ├── cgroup.clone_children │ ├── cgroup.event_control │ ├── cgroup.procs │ ├── cgroup.sane_behavior │ ├── cpuacct.stat │ ├── cpuacct.usage │ ├── cpuacct.usage_percpu │ ├── cpu.shares │ ├── notify_on_release │ ├── release_agent │ └── tasks ├── cpuset │ ├── cgroup.clone_children │ ├── cgroup.event_control │ ├── cgroup.procs │ ├── cgroup.sane_behavior │ ├── cpuset.cpu_exclusive │ ├── cpuset.cpus │ ├── cpuset.mem_exclusive │ ├── cpuset.mem_hardwall │ ├── cpuset.memory_migrate │ ├── cpuset.memory_pressure │ ├── cpuset.memory_pressure_enabled │ ├── cpuset.memory_spread_page │ ├── cpuset.memory_spread_slab │ ├── cpuset.mems │ ├── cpuset.sched_load_balance │ ├── cpuset.sched_relax_domain_level │ ├── machine.slice │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── cpuset.cpu_exclusive │ │ ├── cpuset.cpus │ │ ├── cpuset.mem_exclusive │ │ ├── cpuset.mem_hardwall │ │ ├── cpuset.memory_migrate │ │ ├── cpuset.memory_pressure │ │ ├── cpuset.memory_spread_page │ │ ├── cpuset.memory_spread_slab │ │ ├── cpuset.mems │ │ ├── cpuset.sched_load_balance │ │ ├── cpuset.sched_relax_domain_level │ │ ├── machine-qemu\x2dotrs.scope │ │ │ ├── cgroup.clone_children │ │ │ ├── cgroup.event_control │ │ │ ├── cgroup.procs │ │ │ ├── cpuset.cpu_exclusive │ │ │ ├── cpuset.cpus │ │ │ ├── cpuset.mem_exclusive │ │ │ ├── cpuset.mem_hardwall │ │ │ ├── cpuset.memory_migrate │ │ │ ├── cpuset.memory_pressure │ │ │ ├── cpuset.memory_spread_page │ │ │ ├── cpuset.memory_spread_slab │ │ │ ├── cpuset.mems │ │ │ ├── cpuset.sched_load_balance │ │ │ ├── cpuset.sched_relax_domain_level │ │ │ ├── emulator │ │ │ │ ├── cgroup.clone_children │ │ │ │ ├── cgroup.event_control │ │ │ │ ├── cgroup.procs │ │ │ │ ├── cpuset.cpu_exclusive │ │ │ │ ├── cpuset.cpus │ │ │ │ ├── cpuset.mem_exclusive │ │ │ │ ├── cpuset.mem_hardwall │ │ │ │ ├── cpuset.memory_migrate │ │ │ │ ├── cpuset.memory_pressure │ │ │ │ ├── cpuset.memory_spread_page │ │ │ │ ├── cpuset.memory_spread_slab │ │ │ │ ├── cpuset.mems │ │ │ │ ├── cpuset.sched_load_balance │ │ │ │ ├── cpuset.sched_relax_domain_level │ │ │ │ ├── notify_on_release │ │ │ │ └── tasks │ │ │ ├── notify_on_release │ │ │ ├── tasks │ │ │ ├── vcpu0 │ │ │ │ ├── cgroup.clone_children │ │ │ │ ├── cgroup.event_control │ │ │ │ ├── cgroup.procs │ │ │ │ ├── cpuset.cpu_exclusive │ │ │ │ ├── cpuset.cpus │ │ │ │ ├── cpuset.mem_exclusive │ │ │ │ ├── cpuset.mem_hardwall │ │ │ │ ├── cpuset.memory_migrate │ │ │ │ ├── cpuset.memory_pressure │ │ │ │ ├── cpuset.memory_spread_page │ │ │ │ ├── cpuset.memory_spread_slab │ │ │ │ ├── cpuset.mems │ │ │ │ ├── cpuset.sched_load_balance │ │ │ │ ├── cpuset.sched_relax_domain_level │ │ │ │ ├── notify_on_release │ │ │ │ └── tasks │ │ │ └── vcpu1 │ │ │ ├── cgroup.clone_children │ │ │ ├── cgroup.event_control │ │ │ ├── cgroup.procs │ │ │ ├── cpuset.cpu_exclusive │ │ │ ├── cpuset.cpus │ │ │ ├── cpuset.mem_exclusive │ │ │ ├── cpuset.mem_hardwall │ │ │ ├── cpuset.memory_migrate │ │ │ ├── cpuset.memory_pressure │ │ │ ├── cpuset.memory_spread_page │ │ │ ├── cpuset.memory_spread_slab │ │ │ ├── cpuset.mems │ │ │ ├── cpuset.sched_load_balance │ │ │ ├── cpuset.sched_relax_domain_level │ │ │ ├── notify_on_release │ │ │ └── tasks │ │ ├── notify_on_release │ │ └── tasks │ ├── notify_on_release │ ├── release_agent │ └── tasks ├── devices │ ├── cgroup.clone_children │ ├── cgroup.event_control │ ├── cgroup.procs │ ├── cgroup.sane_behavior │ ├── devices.allow │ ├── devices.deny │ ├── devices.list │ ├── notify_on_release │ ├── release_agent │ ├── system.slice │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── devices.allow │ │ ├── devices.deny │ │ ├── devices.list │ │ ├── notify_on_release │ │ ├── systemd-machined.service │ │ │ ├── cgroup.clone_children │ │ │ ├── cgroup.event_control │ │ │ ├── cgroup.procs │ │ │ ├── devices.allow │ │ │ ├── devices.deny │ │ │ ├── devices.list │ │ │ ├── notify_on_release │ │ │ └── tasks │ │ └── tasks │ └── tasks └── systemd ├── cgroup.clone_children ├── cgroup.event_control ├── cgroup.procs ├── cgroup.sane_behavior ├── machine.slice │ ├── cgroup.clone_children │ ├── cgroup.event_control │ ├── cgroup.procs │ ├── machine-qemu\x2dotrs.scope │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── notify_on_release │ └── tasks ├── notify_on_release ├── release_agent ├── system.slice │ ├── cgroup.clone_children │ ├── cgroup.event_control │ ├── cgroup.procs │ ├── chronyd.service │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── dbus.service │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── dev-disk-by\x2did-scsi\x2d36003005701b46bf01b0d2db32bcaee78.swap │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── dev-disk-by\x2did-wwn\x2d0x6003005701b46bf01b0d2db32bcaee78.swap │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── dev-disk-by\x2dlabel-SWAP.swap │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── dev-disk-by\x2dpath-pci\x2d0000:02:00.0\x2dscsi\x2d0:2:1:0.swap │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── dev-disk-by\x2duuid-102d41a8\x2d848d\x2d4525\x2db39e\x2dd9b543355b71.swap │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── dev-mqueue.mount │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── dev-sdb.swap │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── kmod-static-nodes.service │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── libvirtd.service │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── libvirt-guests.service │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── mnt-amhold.mount │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── mnt-btrfs_windows.mount │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── -.mount │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── notify_on_release │ ├── run-user-0.mount │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── system-amanda.slice │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── systemd-journald.service │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── systemd-logind.service │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── systemd-machined.service │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── systemd-random-seed.service │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── systemd-remount-fs.service │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── systemd-sysctl.service │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── systemd-tmpfiles-setup-dev.service │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── systemd-tmpfiles-setup.service │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── systemd-udevd.service │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── systemd-udev-settle.service │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── systemd-udev-trigger.service │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── systemd-update-utmp.service │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── systemd-user-sessions.service │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── systemd-vconsole-setup.service │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── system-getty.slice │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── getty@tty1.service │ │ │ ├── cgroup.clone_children │ │ │ ├── cgroup.event_control │ │ │ ├── cgroup.procs │ │ │ ├── notify_on_release │ │ │ └── tasks │ │ ├── notify_on_release │ │ └── tasks │ ├── system-network.slice │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── system-sshd.slice │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ ├── sshd@3-172.32.99.234:22-172.32.99.12:43817.service │ │ │ ├── cgroup.clone_children │ │ │ ├── cgroup.event_control │ │ │ ├── cgroup.procs │ │ │ ├── notify_on_release │ │ │ └── tasks │ │ ├── sshd@7-172.32.99.234:22-172.32.99.12:44251.service │ │ │ ├── cgroup.clone_children │ │ │ ├── cgroup.event_control │ │ │ ├── cgroup.procs │ │ │ ├── notify_on_release │ │ │ └── tasks │ │ └── tasks │ ├── system-systemd\x2dfsck.slice │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── tasks │ ├── tmp.mount │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ ├── var-tmp-portage.mount │ │ ├── cgroup.clone_children │ │ ├── cgroup.event_control │ │ ├── cgroup.procs │ │ ├── notify_on_release │ │ └── tasks │ └── vixie-cron.service │ ├── cgroup.clone_children │ ├── cgroup.event_control │ ├── cgroup.procs │ ├── notify_on_release │ └── tasks ├── tasks └── user.slice ├── cgroup.clone_children ├── cgroup.event_control ├── cgroup.procs ├── notify_on_release ├── tasks └── user-0.slice ├── cgroup.clone_children ├── cgroup.event_control ├── cgroup.procs ├── notify_on_release ├── session-2.scope │ ├── cgroup.clone_children │ ├── cgroup.event_control │ ├── cgroup.procs │ ├── notify_on_release │ └── tasks ├── session-4.scope │ ├── cgroup.clone_children │ ├── cgroup.event_control │ ├── cgroup.procs │ ├── notify_on_release │ └── tasks ├── session-8.scope │ ├── cgroup.clone_children │ ├── cgroup.event_control │ ├── cgroup.procs │ ├── notify_on_release │ └── tasks ├── tasks └── user@0.service ├── cgroup.clone_children ├── cgroup.event_control ├── cgroup.procs ├── notify_on_release └── tasks 63 directories, 393 files >> /dev/sda on /mnt/btrfs_windows type btrfs (rw,noatime,space_cache) > > a little odd that you have no partitions but otherwise minor. That is btrfs-specific ... the whole /dev/sda is the btrfs-pool. >> the last line is meant as a target directory for dumping the content of >> the LV winserver_disk0 ... it is a btrfs subvolume mounted with >> compression turned OFF. >> > > if you consider that your drives are on the same raidset, they are all > essentially "one disk". > copying from one disk to the same disk you are halving the speed it will > work at. ... sure ... but not THAT slow ... with 6 disks I would assume to still get decent performance. I want both performance and redundance so I went for this setup. KVM images on btrfs: bad idea (or: not the best idea) on LVM: I want to run virt-backup for backing up the raw disk image, I do that on ~3 other customer servers and it works fine ... so ... Maybe I have to rethink the RAID setup, yes. What is a best practise here? One big hw-array with RAID6 -> /dev/sda and then partition it like sda1 -> / sda2 -> swap sda3 -> LVM -> KVM-LVs ... ? ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-11 10:34 ` Stefan G. Weichinger @ 2014-06-11 10:41 ` thegeezer 2014-06-11 10:49 ` Stefan G. Weichinger 0 siblings, 1 reply; 30+ messages in thread From: thegeezer @ 2014-06-11 10:41 UTC (permalink / raw To: gentoo-user On 06/11/2014 11:34 AM, Stefan G. Weichinger wrote: > Am 11.06.2014 12:14, schrieb thegeezer: > >>> Basically 3 RAID-6 hw-raids over 6 SAS hdds. >> OK so i'm confused again. RAID6 requires minimum of 4 drives. >> if you have 3 raid6's then you would need 12 drives (coffee hasn't quite >> activated in me yet so my maths may not be right) >> or do you have essentially the first part of each of the six drives be >> virtual disk 1, the second part of each of the six drives virtual disk 2 >> and the third part be virtual disk 3 -- if this is the case bear in mind >> that the slowest part of the disk is the end of the disk -- so you are >> essentially hobbling your virtual disk3 but only a little, instead of >> being around 150MB/sec it might run at 80. > > I'd be happy to see 80 ! > > Ran atop now while dd-ing stuff to an external disk and got ~1MB/s for > 2.5GB of data. > > (this is even too slow for USB ...) > > I am unsure what to post here from atop ... ? > > > To the initial question: > > Yes, imagine the six disks "split" or partitioned at the level of the > hardware raid controller (as you described above). > >> you might also like to try a simple test of the following (yes lvs count >> as block devices) >> # hdparm -t /dev/sda >> # hdparm -t /dev/sdb >> # hdparm -t /dev/sdc >> # hdparm -t /dev/vg01/winserver_disk0 >> # hdparm -t /dev/vg01/amhold > everything around 380 MB/s ... only ~350 MB/s for > /dev/vg01/winserver_disk0 (which still is nice) OK here is the clue. if the LVs are also showing such fast speed, then please can you show your command that you are trying to run that is so slow ? ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-11 10:41 ` thegeezer @ 2014-06-11 10:49 ` Stefan G. Weichinger 2014-06-11 11:01 ` thegeezer 2014-06-11 11:18 ` thegeezer 0 siblings, 2 replies; 30+ messages in thread From: Stefan G. Weichinger @ 2014-06-11 10:49 UTC (permalink / raw To: gentoo-user Am 11.06.2014 12:41, schrieb thegeezer: >> everything around 380 MB/s ... only ~350 MB/s for >> /dev/vg01/winserver_disk0 (which still is nice) > > > OK here is the clue. > if the LVs are also showing such fast speed, then please can you show > your command that you are trying to run that is so slow ? I originally noticed that virt-backup was slow so I looked into it and found some dd-command. My tests right now are like this: booze ~ # dd if=/dev/vg01/winserver_disk0 bs=1M of=/dev/null ^C25+0 Datensätze ein 24+0 Datensätze aus 25165824 Bytes (25 MB) kopiert, 13,8039 s, 1,8 MB/s booze ~ # dd if=/dev/vg01/winserver_disk0 bs=4M of=/dev/null ^C6+0 Datensätze ein 5+0 Datensätze aus 20971520 Bytes (21 MB) kopiert, 12,5837 s, 1,7 MB/s booze ~ # dd if=/dev/vg01/winserver_disk0 of=/dev/null ^C55009+0 Datensätze ein 55008+0 Datensätze aus 28164096 Bytes (28 MB) kopiert, 12,611 s, 2,2 MB/s So no "copy from-to same disk here" ... should be just plain reading, right? virt-backup does some ionice-stuff as well, but as you see, my test-commands don't. # cat /sys/block/sdc/queue/scheduler [noop] deadline cfq -> noop scheduler to let the controller do its own scheduling thanks, Stefan ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-11 10:49 ` Stefan G. Weichinger @ 2014-06-11 11:01 ` thegeezer 2014-06-11 11:20 ` Stefan G. Weichinger 2014-06-11 11:18 ` thegeezer 1 sibling, 1 reply; 30+ messages in thread From: thegeezer @ 2014-06-11 11:01 UTC (permalink / raw To: gentoo-user On 06/11/2014 11:49 AM, Stefan G. Weichinger wrote: > Am 11.06.2014 12:41, schrieb thegeezer: > >>> everything around 380 MB/s ... only ~350 MB/s for >>> /dev/vg01/winserver_disk0 (which still is nice) >> >> OK here is the clue. >> if the LVs are also showing such fast speed, then please can you show >> your command that you are trying to run that is so slow ? > I originally noticed that virt-backup was slow so I looked into it and > found some dd-command. > > My tests right now are like this: > > > > booze ~ # dd if=/dev/vg01/winserver_disk0 bs=1M of=/dev/null > ^C25+0 Datensätze ein > 24+0 Datensätze aus > 25165824 Bytes (25 MB) kopiert, 13,8039 s, 1,8 MB/s > > booze ~ # dd if=/dev/vg01/winserver_disk0 bs=4M of=/dev/null > ^C6+0 Datensätze ein > 5+0 Datensätze aus > 20971520 Bytes (21 MB) kopiert, 12,5837 s, 1,7 MB/s > > booze ~ # dd if=/dev/vg01/winserver_disk0 of=/dev/null > ^C55009+0 Datensätze ein > 55008+0 Datensätze aus > 28164096 Bytes (28 MB) kopiert, 12,611 s, 2,2 MB/s > > So no "copy from-to same disk here" ... should be just plain reading, right? > > virt-backup does some ionice-stuff as well, but as you see, my > test-commands don't. > > # cat /sys/block/sdc/queue/scheduler > [noop] deadline cfq > > -> noop scheduler to let the controller do its own scheduling > > > > thanks, Stefan > > > yeah this is very very odd. firstly there should not be such discrepancy between hdparm -t and dd if= secondly you would imagine that the first dd would be cached and so would be faster the second time round please check for the turbo boost disable, i'll have a closer look at the cgroups ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-11 11:01 ` thegeezer @ 2014-06-11 11:20 ` Stefan G. Weichinger 0 siblings, 0 replies; 30+ messages in thread From: Stefan G. Weichinger @ 2014-06-11 11:20 UTC (permalink / raw To: gentoo-user Am 11.06.2014 13:01, schrieb thegeezer: > yeah this is very very odd. > firstly there should not be such discrepancy between hdparm -t and dd if= > secondly you would imagine that the first dd would be cached and so > would be faster the second time round > please check for the turbo boost disable, i'll have a closer look at the > cgroups no turbo boost found. only a powermanagement menu ... I disabled it again. It was disabled per default, other options are "efficient" and "custom" ... so I understand it as "performant" when it is disabled. "custom" brings several options then, I had tried the performant options already without success. Right now I get around 18-20 MB/s for the /dev/null test. ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-11 10:49 ` Stefan G. Weichinger 2014-06-11 11:01 ` thegeezer @ 2014-06-11 11:18 ` thegeezer 2014-06-11 11:21 ` Stefan G. Weichinger 1 sibling, 1 reply; 30+ messages in thread From: thegeezer @ 2014-06-11 11:18 UTC (permalink / raw To: gentoo-user On 06/11/2014 11:49 AM, Stefan G. Weichinger wrote: > Am 11.06.2014 12:41, schrieb thegeezer: > >>> everything around 380 MB/s ... only ~350 MB/s for >>> /dev/vg01/winserver_disk0 (which still is nice) >> >> OK here is the clue. >> if the LVs are also showing such fast speed, then please can you show >> your command that you are trying to run that is so slow ? > I originally noticed that virt-backup was slow so I looked into it and > found some dd-command. > > My tests right now are like this: > > > > booze ~ # dd if=/dev/vg01/winserver_disk0 bs=1M of=/dev/null > ^C25+0 Datensätze ein > 24+0 Datensätze aus > 25165824 Bytes (25 MB) kopiert, 13,8039 s, 1,8 MB/s > > booze ~ # dd if=/dev/vg01/winserver_disk0 bs=4M of=/dev/null > ^C6+0 Datensätze ein > 5+0 Datensätze aus > 20971520 Bytes (21 MB) kopiert, 12,5837 s, 1,7 MB/s > > booze ~ # dd if=/dev/vg01/winserver_disk0 of=/dev/null > ^C55009+0 Datensätze ein > 55008+0 Datensätze aus > 28164096 Bytes (28 MB) kopiert, 12,611 s, 2,2 MB/s > > So no "copy from-to same disk here" ... should be just plain reading, right? > > virt-backup does some ionice-stuff as well, but as you see, my > test-commands don't. > > # cat /sys/block/sdc/queue/scheduler > [noop] deadline cfq > > -> noop scheduler to let the controller do its own scheduling > > > > thanks, Stefan > > > just out of curiosity, what happens if you do # dd if=/dev/vg01/amhold of=/dev/null bs=1M count=100 # dd if=/dev/sdc of=/dev/null bs=1M count=100 ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-11 11:18 ` thegeezer @ 2014-06-11 11:21 ` Stefan G. Weichinger 2014-06-11 11:52 ` thegeezer 0 siblings, 1 reply; 30+ messages in thread From: Stefan G. Weichinger @ 2014-06-11 11:21 UTC (permalink / raw To: gentoo-user Am 11.06.2014 13:18, schrieb thegeezer: > just out of curiosity, what happens if you do # dd > if=/dev/vg01/amhold of=/dev/null bs=1M count=100 # dd if=/dev/sdc > of=/dev/null bs=1M count=100 booze ~ # dd if=/dev/vg01/amhold of=/dev/null bs=1M count=100 100+0 Datensätze ein 100+0 Datensätze aus 104857600 Bytes (105 MB) kopiert, 1,71368 s, 61,2 MB/s booze ~ # dd if=/dev/sdc of=/dev/null bs=1M count=100 100+0 Datensätze ein 100+0 Datensätze aus 104857600 Bytes (105 MB) kopiert, 2,40518 s, 43,6 MB/s ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-11 11:21 ` Stefan G. Weichinger @ 2014-06-11 11:52 ` thegeezer 2014-06-11 12:41 ` Stefan G. Weichinger 0 siblings, 1 reply; 30+ messages in thread From: thegeezer @ 2014-06-11 11:52 UTC (permalink / raw To: gentoo-user On 06/11/2014 12:21 PM, Stefan G. Weichinger wrote: > Am 11.06.2014 13:18, schrieb thegeezer: > >> just out of curiosity, what happens if you do # dd >> if=/dev/vg01/amhold of=/dev/null bs=1M count=100 # dd if=/dev/sdc >> of=/dev/null bs=1M count=100 > > > booze ~ # dd if=/dev/vg01/amhold of=/dev/null bs=1M count=100 > 100+0 Datensätze ein > 100+0 Datensätze aus > 104857600 Bytes (105 MB) kopiert, 1,71368 s, 61,2 MB/s > > booze ~ # dd if=/dev/sdc of=/dev/null bs=1M count=100 > 100+0 Datensätze ein > 100+0 Datensätze aus > 104857600 Bytes (105 MB) kopiert, 2,40518 s, 43,6 MB/s > > ok baffling. sdc i already said would be slower but not this much slower it certainly should not be slower than the lvm that sits on top of it! i can't see anything in the cgroups that stands out, maybe someone else can give a better voice to this. all i can think is there is other IO happening in atop if you can highlight any line that begins LVM CPU or DSK and paste it in to a reply - with no virtualmachines running and no dd or anything. then run a dd as before and highlight the lines in atop while it is running (maybe increase count to 1000 to give yourself a chance) and paste in here too ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-11 11:52 ` thegeezer @ 2014-06-11 12:41 ` Stefan G. Weichinger 2014-06-11 13:32 ` thegeezer 0 siblings, 1 reply; 30+ messages in thread From: Stefan G. Weichinger @ 2014-06-11 12:41 UTC (permalink / raw To: gentoo-user Am 11.06.2014 13:52, schrieb thegeezer: > ok baffling. > sdc i already said would be slower but not this much slower > it certainly should not be slower than the lvm that sits on top of it! > i can't see anything in the cgroups that stands out, maybe someone else > can give a better voice to this. > > all i can think is there is other IO happening > in atop if you can highlight any line that begins LVM CPU or DSK and > paste it in to a reply - with no virtualmachines running and no dd or > anything. > then run a dd as before and highlight the lines in atop while it is > running (maybe increase count to 1000 to give yourself a chance) and > paste in here too I did a test with a sysresccd from 2013 (that is kernel 3.4.52 ... phew) Just booted, "vgchange -ay" and then the dd-test from LV to /dev/null -> with or without count=500 I get around 340-350 MB/s ! So my kernel-config seems buggy or I should downgrade to something older? Aside from that I checked the firmware of the controller, it has the latest release. Stefan ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-11 12:41 ` Stefan G. Weichinger @ 2014-06-11 13:32 ` thegeezer 2014-06-11 13:44 ` Stefan G. Weichinger 0 siblings, 1 reply; 30+ messages in thread From: thegeezer @ 2014-06-11 13:32 UTC (permalink / raw To: gentoo-user On 06/11/2014 01:41 PM, Stefan G. Weichinger wrote: > Am 11.06.2014 13:52, schrieb thegeezer: > >> ok baffling. >> sdc i already said would be slower but not this much slower >> it certainly should not be slower than the lvm that sits on top of it! >> i can't see anything in the cgroups that stands out, maybe someone else >> can give a better voice to this. >> >> all i can think is there is other IO happening >> in atop if you can highlight any line that begins LVM CPU or DSK and >> paste it in to a reply - with no virtualmachines running and no dd or >> anything. >> then run a dd as before and highlight the lines in atop while it is >> running (maybe increase count to 1000 to give yourself a chance) and >> paste in here too > > I did a test with a sysresccd from 2013 (that is kernel 3.4.52 ... phew) > > Just booted, "vgchange -ay" and then the dd-test from LV to /dev/null > > -> with or without count=500 I get around 340-350 MB/s ! > > So my kernel-config seems buggy or I should downgrade to something older? I suspect that in your fully running system somethingelse(tm) is stealing the activity. can you start up with no services enabled and do the test ? > Aside from that I checked the firmware of the controller, it has the > latest release. > > Stefan > > > > > ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-11 13:32 ` thegeezer @ 2014-06-11 13:44 ` Stefan G. Weichinger 2014-06-11 14:15 ` Stefan G. Weichinger 0 siblings, 1 reply; 30+ messages in thread From: Stefan G. Weichinger @ 2014-06-11 13:44 UTC (permalink / raw To: gentoo-user Am 11.06.2014 15:32, schrieb thegeezer: >> So my kernel-config seems buggy or I should downgrade to something older? > > I suspect that in your fully running system somethingelse(tm) is > stealing the activity. can you start up with no services enabled and > do the test ? hm, yes. although I had deactivated most of it already. Right now I compile a 3.10.x kernel with a config pulled from the sysresccd ... way more stuff compiled in, but maybe a step ... ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-11 13:44 ` Stefan G. Weichinger @ 2014-06-11 14:15 ` Stefan G. Weichinger 2014-06-11 14:18 ` thegeezer 0 siblings, 1 reply; 30+ messages in thread From: Stefan G. Weichinger @ 2014-06-11 14:15 UTC (permalink / raw To: gentoo-user Am 11.06.2014 15:44, schrieb Stefan G. Weichinger: > Am 11.06.2014 15:32, schrieb thegeezer: > >>> So my kernel-config seems buggy or I should downgrade to something older? >> >> I suspect that in your fully running system somethingelse(tm) is >> stealing the activity. can you start up with no services enabled and >> do the test ? > > hm, yes. although I had deactivated most of it already. > > > Right now I compile a 3.10.x kernel with a config pulled from the > sysresccd ... way more stuff compiled in, but maybe a step ... That definitely helped. Faster booting and now the bottleneck is gone somewhere. dd-tests look good now, I already do a first backup via virt-backup (which runs a dd with bs=4M under the hood ... and I pipe that through pigz ...) Now I migrate and slim down this kernel config for the (gentoo-)stable kernel linux-3.12.21-gentoo-r1 ... we'll see! Thanks @thegeezer for the help so far! Stefan ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-11 14:15 ` Stefan G. Weichinger @ 2014-06-11 14:18 ` thegeezer 2014-06-11 14:38 ` Stefan G. Weichinger 0 siblings, 1 reply; 30+ messages in thread From: thegeezer @ 2014-06-11 14:18 UTC (permalink / raw To: gentoo-user On 06/11/2014 03:15 PM, Stefan G. Weichinger wrote: > Am 11.06.2014 15:44, schrieb Stefan G. Weichinger: >> Am 11.06.2014 15:32, schrieb thegeezer: >> >>>> So my kernel-config seems buggy or I should downgrade to something older? >>> I suspect that in your fully running system somethingelse(tm) is >>> stealing the activity. can you start up with no services enabled and >>> do the test ? >> hm, yes. although I had deactivated most of it already. >> >> >> Right now I compile a 3.10.x kernel with a config pulled from the >> sysresccd ... way more stuff compiled in, but maybe a step ... > That definitely helped. > > Faster booting and now the bottleneck is gone somewhere. > > dd-tests look good now, I already do a first backup via virt-backup > (which runs a dd with bs=4M under the hood ... and I pipe that through > pigz ...) > > Now I migrate and slim down this kernel config for the (gentoo-)stable > kernel linux-3.12.21-gentoo-r1 ... we'll see! > > Thanks @thegeezer for the help so far! > > Stefan > > it will be interesting to diff the previous.config and the current.config to see what the difference is! ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-11 14:18 ` thegeezer @ 2014-06-11 14:38 ` Stefan G. Weichinger 2014-06-11 18:57 ` Stefan G. Weichinger 0 siblings, 1 reply; 30+ messages in thread From: Stefan G. Weichinger @ 2014-06-11 14:38 UTC (permalink / raw To: gentoo-user [-- Attachment #1: Type: text/plain, Size: 333 bytes --] Am 11.06.2014 16:18, schrieb thegeezer: > it will be interesting to diff the previous.config and the > current.config to see what the difference is! rebooted with "new" 3.12.21-r1, still good performance diff attached No clue what option(s) make the difference. But I will try to slim that down a bit ... step by step. Stefan [-- Attachment #2: diff --] [-- Type: text/plain, Size: 134061 bytes --] --- boozeconfig 2014-06-11 11:33:04.444134003 +0200 +++ newconfig 2014-06-11 16:35:43.283966671 +0200 @@ -27,6 +27,8 @@ CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y @@ -45,6 +47,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_HAVE_INTEL_TXT=y CONFIG_X86_64_SMP=y CONFIG_X86_HT=y CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" @@ -94,6 +97,7 @@ CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_IRQ_DOMAIN=y +# CONFIG_IRQ_DOMAIN_DEBUG is not set CONFIG_IRQ_FORCED_THREADING=y CONFIG_SPARSE_IRQ=y CONFIG_CLOCKSOURCE_WATCHDOG=y @@ -109,8 +113,9 @@ # Timers subsystem # CONFIG_TICK_ONESHOT=y -CONFIG_HZ_PERIODIC=y -# CONFIG_NO_HZ_IDLE is not set +CONFIG_NO_HZ_COMMON=y +# CONFIG_HZ_PERIODIC is not set +CONFIG_NO_HZ_IDLE=y # CONFIG_NO_HZ_FULL is not set CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -118,13 +123,15 @@ # # CPU/Task time and stats accounting # -CONFIG_TICK_CPU_ACCOUNTING=y +# CONFIG_TICK_CPU_ACCOUNTING is not set # CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set -# CONFIG_IRQ_TIME_ACCOUNTING is not set -# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_IRQ_TIME_ACCOUNTING=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y -# CONFIG_TASK_XACCT is not set +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y # # RCU Subsystem @@ -136,6 +143,7 @@ CONFIG_RCU_FANOUT=64 CONFIG_RCU_FANOUT_LEAF=16 # CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_RCU_FAST_NO_HZ is not set # CONFIG_TREE_RCU_TRACE is not set # CONFIG_RCU_NOCB_CPU is not set CONFIG_IKCONFIG=y @@ -144,20 +152,24 @@ CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y +# CONFIG_NUMA_BALANCING is not set CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set -# CONFIG_CGROUP_FREEZER is not set +CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y CONFIG_PROC_PID_CPUSET=y CONFIG_CGROUP_CPUACCT=y -# CONFIG_RESOURCE_COUNTERS is not set -# CONFIG_CGROUP_PERF is not set +CONFIG_RESOURCE_COUNTERS=y +# CONFIG_MEMCG is not set +# CONFIG_CGROUP_HUGETLB is not set +CONFIG_CGROUP_PERF=y CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_CFS_BANDWIDTH is not set -# CONFIG_RT_GROUP_SCHED is not set -# CONFIG_BLK_CGROUP is not set +CONFIG_CFS_BANDWIDTH=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_BLK_CGROUP=y +# CONFIG_DEBUG_BLK_CGROUP is not set # CONFIG_CHECKPOINT_RESTORE is not set CONFIG_NAMESPACES=y CONFIG_UTS_NS=y @@ -166,33 +178,33 @@ CONFIG_PID_NS=y CONFIG_NET_NS=y # CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set -# CONFIG_SCHED_AUTOGROUP is not set +CONFIG_SCHED_AUTOGROUP=y # CONFIG_SYSFS_DEPRECATED is not set -# CONFIG_RELAY is not set +CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y -# CONFIG_RD_BZIP2 is not set -# CONFIG_RD_LZMA is not set -# CONFIG_RD_XZ is not set -# CONFIG_RD_LZO is not set -# CONFIG_RD_LZ4 is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_RD_LZO=y +CONFIG_RD_LZ4=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_HAVE_UID16=y CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_HAVE_PCSPKR_PLATFORM=y -CONFIG_EXPERT=y -# CONFIG_UID16 is not set +# CONFIG_EXPERT is not set +CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_ALL=y CONFIG_PRINTK=y -# CONFIG_BUG is not set -# CONFIG_ELF_CORE is not set -# CONFIG_PCSPKR_PLATFORM is not set -# CONFIG_BASE_FULL is not set +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y @@ -209,19 +221,26 @@ # CONFIG_PERF_EVENTS=y # CONFIG_DEBUG_PERF_USE_VMALLOC is not set -# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set -# CONFIG_SLUB is not set -CONFIG_SLOB=y -# CONFIG_PROFILING is not set +CONFIG_SLUB=y +CONFIG_SLUB_CPU_PARTIAL=y +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +CONFIG_OPROFILE=m +CONFIG_OPROFILE_EVENT_MULTIPLEX=y CONFIG_HAVE_OPROFILE=y CONFIG_OPROFILE_NMI_TIMER=y -# CONFIG_KPROBES is not set +CONFIG_KPROBES=y CONFIG_JUMP_LABEL=y +CONFIG_OPTPROBES=y +CONFIG_UPROBES=y # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_KRETPROBES=y CONFIG_USER_RETURN_NOTIFIER=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y @@ -242,6 +261,7 @@ CONFIG_HAVE_PERF_USER_STACK_DUMP=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y +CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y CONFIG_HAVE_CMPXCHG_LOCAL=y CONFIG_HAVE_CMPXCHG_DOUBLE=y CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y @@ -259,9 +279,11 @@ # # GCOV-based kernel profiling # +# CONFIG_GCOV_KERNEL is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=1 +CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y @@ -272,8 +294,9 @@ CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_BSG=y -# CONFIG_BLK_DEV_BSGLIB is not set -# CONFIG_BLK_DEV_INTEGRITY is not set +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_BLK_DEV_THROTTLING=y # CONFIG_BLK_CMDLINE_PARSER is not set # @@ -282,22 +305,23 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_AIX_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_LDM_PARTITION=y +# CONFIG_LDM_DEBUG is not set +CONFIG_SGI_PARTITION=y +CONFIG_ULTRIX_PARTITION=y +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y CONFIG_EFI_PARTITION=y -# CONFIG_SYSV68_PARTITION is not set +CONFIG_SYSV68_PARTITION=y # CONFIG_CMDLINE_PARTITION is not set CONFIG_BLOCK_COMPAT=y @@ -307,82 +331,95 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +CONFIG_CFQ_GROUP_IOSCHED=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -CONFIG_DEFAULT_NOOP=y -CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_PREEMPT_NOTIFIERS=y +CONFIG_PADATA=y CONFIG_INLINE_SPIN_UNLOCK_IRQ=y CONFIG_INLINE_READ_UNLOCK=y CONFIG_INLINE_READ_UNLOCK_IRQ=y CONFIG_INLINE_WRITE_UNLOCK=y CONFIG_INLINE_WRITE_UNLOCK_IRQ=y CONFIG_MUTEX_SPIN_ON_OWNER=y -# CONFIG_FREEZER is not set +CONFIG_FREEZER=y # # Processor type and features # CONFIG_ZONE_DMA=y CONFIG_SMP=y -# CONFIG_X86_MPPARSE is not set -# CONFIG_X86_EXTENDED_PLATFORM is not set +CONFIG_X86_X2APIC=y +CONFIG_X86_MPPARSE=y +CONFIG_X86_EXTENDED_PLATFORM=y +# CONFIG_X86_NUMACHIP is not set +# CONFIG_X86_VSMP is not set +# CONFIG_X86_UV is not set # CONFIG_X86_INTEL_LPSS is not set -# CONFIG_SCHED_OMIT_FRAME_POINTER is not set +CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_HYPERVISOR_GUEST is not set CONFIG_NO_BOOTMEM=y # CONFIG_MEMTEST is not set # CONFIG_MK8 is not set # CONFIG_MPSC is not set -CONFIG_MCORE2=y +# CONFIG_MCORE2 is not set # CONFIG_MATOM is not set -# CONFIG_GENERIC_CPU is not set +CONFIG_GENERIC_CPU=y CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_L1_CACHE_SHIFT=6 -CONFIG_X86_INTEL_USERCOPY=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_P6_NOP=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y -CONFIG_PROCESSOR_SELECT=y CONFIG_CPU_SUP_INTEL=y -# CONFIG_CPU_SUP_AMD is not set -# CONFIG_CPU_SUP_CENTAUR is not set +CONFIG_CPU_SUP_AMD=y +CONFIG_CPU_SUP_CENTAUR=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y +CONFIG_GART_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y # CONFIG_MAXSMP is not set -CONFIG_NR_CPUS=32 -# CONFIG_SCHED_SMT is not set +CONFIG_NR_CPUS=256 +CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y -# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set -# CONFIG_X86_MCE is not set -# CONFIG_I8K is not set -CONFIG_MICROCODE=y +CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y +CONFIG_X86_MCE=y +CONFIG_X86_MCE_INTEL=y +CONFIG_X86_MCE_AMD=y +CONFIG_X86_MCE_THRESHOLD=y +# CONFIG_X86_MCE_INJECT is not set +CONFIG_X86_THERMAL_VECTOR=y +CONFIG_I8K=m +CONFIG_MICROCODE=m CONFIG_MICROCODE_INTEL=y -# CONFIG_MICROCODE_AMD is not set +CONFIG_MICROCODE_AMD=y CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_MICROCODE_INTEL_LIB=y -CONFIG_MICROCODE_INTEL_EARLY=y +# CONFIG_MICROCODE_INTEL_EARLY is not set # CONFIG_MICROCODE_AMD_EARLY is not set -CONFIG_MICROCODE_EARLY=y -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set +CONFIG_X86_MSR=y +CONFIG_X86_CPUID=y CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y -# CONFIG_NUMA is not set +CONFIG_NUMA=y +CONFIG_AMD_NUMA=y +CONFIG_X86_64_ACPI_NUMA=y +CONFIG_NODES_SPAN_OTHER_NODES=y +# CONFIG_NUMA_EMU is not set +CONFIG_NODES_SHIFT=9 CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y @@ -391,6 +428,7 @@ CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y +CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y @@ -399,6 +437,8 @@ CONFIG_HAVE_MEMBLOCK=y CONFIG_HAVE_MEMBLOCK_NODE_MAP=y CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_MEMORY_ISOLATION=y +# CONFIG_MOVABLE_NODE is not set # CONFIG_HAVE_BOOTMEM_INFO_NODE is not set # CONFIG_MEMORY_HOTPLUG is not set CONFIG_PAGEFLAGS_EXTENDED=y @@ -409,42 +449,47 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y +CONFIG_NEED_BOUNCE_POOL=y CONFIG_VIRT_TO_BUS=y CONFIG_MMU_NOTIFIER=y CONFIG_KSM=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y +CONFIG_MEMORY_FAILURE=y +CONFIG_HWPOISON_INJECT=m CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y # CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set CONFIG_CROSS_MEMORY_ATTACH=y -# CONFIG_CLEANCACHE is not set +CONFIG_CLEANCACHE=y # CONFIG_FRONTSWAP is not set # CONFIG_CMA is not set # CONFIG_ZBUD is not set -# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set +CONFIG_X86_CHECK_BIOS_CORRUPTION=y +# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set CONFIG_X86_RESERVE_LOW=64 CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y -CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 +CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_ARCH_RANDOM=y CONFIG_X86_SMAP=y CONFIG_EFI=y -# CONFIG_EFI_STUB is not set +CONFIG_EFI_STUB=y CONFIG_SECCOMP=y -# CONFIG_CC_STACKPROTECTOR is not set -CONFIG_HZ_100=y +CONFIG_CC_STACKPROTECTOR=y +# CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=100 +CONFIG_HZ_1000=y +CONFIG_HZ=1000 CONFIG_SCHED_HRTICK=y -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set +CONFIG_KEXEC=y +CONFIG_CRASH_DUMP=y CONFIG_PHYSICAL_START=0x1000000 -# CONFIG_RELOCATABLE is not set +CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y # CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set @@ -452,26 +497,44 @@ # CONFIG_COMPAT_VDSO is not set # CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_USE_PERCPU_NUMA_NODE_ID=y # # Power management and ACPI options # -# CONFIG_SUSPEND is not set +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y # CONFIG_HIBERNATION is not set -# CONFIG_PM_RUNTIME is not set +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +# CONFIG_PM_AUTOSLEEP is not set +# CONFIG_PM_WAKELOCKS is not set +CONFIG_PM_RUNTIME=y +CONFIG_PM=y +CONFIG_PM_DEBUG=y +CONFIG_PM_ADVANCED_DEBUG=y +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_PM_SLEEP_DEBUG=y +CONFIG_PM_TRACE=y +CONFIG_PM_TRACE_RTC=y +# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set CONFIG_ACPI=y +CONFIG_ACPI_SLEEP=y CONFIG_ACPI_PROCFS=y # CONFIG_ACPI_PROCFS_POWER is not set -# CONFIG_ACPI_EC_DEBUGFS is not set -CONFIG_ACPI_AC=m -# CONFIG_ACPI_BATTERY is not set -CONFIG_ACPI_BUTTON=m -# CONFIG_ACPI_FAN is not set -# CONFIG_ACPI_DOCK is not set -CONFIG_ACPI_PROCESSOR=m +CONFIG_ACPI_EC_DEBUGFS=m +CONFIG_ACPI_AC=y +CONFIG_ACPI_BATTERY=y +CONFIG_ACPI_BUTTON=y +CONFIG_ACPI_VIDEO=m +CONFIG_ACPI_FAN=y +CONFIG_ACPI_DOCK=y +CONFIG_ACPI_PROCESSOR=y +CONFIG_ACPI_IPMI=m CONFIG_ACPI_HOTPLUG_CPU=y -# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set -CONFIG_ACPI_THERMAL=m +CONFIG_ACPI_PROCESSOR_AGGREGATOR=m +CONFIG_ACPI_THERMAL=y +CONFIG_ACPI_NUMA=y # CONFIG_ACPI_CUSTOM_DSDT is not set # CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set CONFIG_ACPI_BLACKLIST_YEAR=0 @@ -479,11 +542,17 @@ CONFIG_ACPI_PCI_SLOT=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y -# CONFIG_ACPI_SBS is not set -# CONFIG_ACPI_HED is not set +CONFIG_ACPI_SBS=m +CONFIG_ACPI_HED=y +CONFIG_ACPI_CUSTOM_METHOD=m # CONFIG_ACPI_BGRT is not set -# CONFIG_ACPI_APEI is not set -# CONFIG_SFI is not set +CONFIG_ACPI_APEI=y +CONFIG_ACPI_APEI_GHES=y +CONFIG_ACPI_APEI_PCIEAER=y +CONFIG_ACPI_APEI_MEMORY_FAILURE=y +# CONFIG_ACPI_APEI_EINJ is not set +# CONFIG_ACPI_APEI_ERST_DEBUG is not set +CONFIG_SFI=y # # CPU Frequency scaling @@ -491,32 +560,34 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_STAT=m +CONFIG_CPU_FREQ_STAT_DETAILS=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_GOV_ONDEMAND=m -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # # x86 CPU frequency scaling drivers # CONFIG_X86_INTEL_PSTATE=y -# CONFIG_X86_PCC_CPUFREQ is not set -# CONFIG_X86_ACPI_CPUFREQ is not set +CONFIG_X86_PCC_CPUFREQ=y +CONFIG_X86_ACPI_CPUFREQ=y +CONFIG_X86_ACPI_CPUFREQ_CPB=y +CONFIG_X86_POWERNOW_K8=y +# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set # CONFIG_X86_SPEEDSTEP_CENTRINO is not set -# CONFIG_X86_P4_CLOCKMOD is not set +CONFIG_X86_P4_CLOCKMOD=y # # shared options # -# CONFIG_X86_SPEEDSTEP_LIB is not set +CONFIG_X86_SPEEDSTEP_LIB=y # # CPU Idle @@ -531,33 +602,36 @@ # # Memory power savings # -# CONFIG_I7300_IDLE is not set +CONFIG_I7300_IDLE_IOAT_CHANNEL=y +CONFIG_I7300_IDLE=m # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y -# CONFIG_PCI_MMCONFIG is not set +CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_CNB20LE_QUIRK is not set CONFIG_PCIEPORTBUS=y CONFIG_HOTPLUG_PCI_PCIE=y -# CONFIG_PCIEAER is not set +CONFIG_PCIEAER=y +CONFIG_PCIE_ECRC=y +CONFIG_PCIEAER_INJECT=m CONFIG_PCIEASPM=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM_DEFAULT=y # CONFIG_PCIEASPM_POWERSAVE is not set # CONFIG_PCIEASPM_PERFORMANCE is not set +CONFIG_PCIE_PME=y CONFIG_PCI_MSI=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_REALLOC_ENABLE_AUTO is not set -# CONFIG_PCI_STUB is not set +CONFIG_PCI_STUB=y CONFIG_HT_IRQ=y CONFIG_PCI_ATS=y CONFIG_PCI_IOV=y -# CONFIG_PCI_PRI is not set -# CONFIG_PCI_PASID is not set +CONFIG_PCI_PRI=y +CONFIG_PCI_PASID=y CONFIG_PCI_IOAPIC=y CONFIG_PCI_LABEL=y @@ -565,12 +639,29 @@ # PCI host controller drivers # CONFIG_ISA_DMA_API=y -# CONFIG_PCCARD is not set +CONFIG_AMD_NB=y +CONFIG_PCCARD=y +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=m +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +CONFIG_PD6729=m +CONFIG_I82092=m +CONFIG_PCCARD_NONSTATIC=y CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_ACPI=y -# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set +CONFIG_HOTPLUG_PCI_ACPI_IBM=m # CONFIG_HOTPLUG_PCI_CPCI is not set -# CONFIG_HOTPLUG_PCI_SHPC is not set +CONFIG_HOTPLUG_PCI_SHPC=m # CONFIG_RAPIDIO is not set # CONFIG_X86_SYSFB is not set @@ -580,18 +671,21 @@ CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_BINFMT_SCRIPT=y # CONFIG_HAVE_AOUT is not set -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_MISC=m CONFIG_COREDUMP=y CONFIG_IA32_EMULATION=y -# CONFIG_IA32_AOUT is not set -# CONFIG_X86_X32 is not set +CONFIG_IA32_AOUT=y +CONFIG_X86_X32=y CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y +CONFIG_KEYS_COMPAT=y CONFIG_X86_DEV_DMA_OPS=y CONFIG_NET=y +CONFIG_COMPAT_NETLINK_MESSAGES=y # # Networking options @@ -599,57 +693,92 @@ CONFIG_PACKET=y # CONFIG_PACKET_DIAG is not set CONFIG_UNIX=y -# CONFIG_UNIX_DIAG is not set +CONFIG_UNIX_DIAG=m CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set +CONFIG_XFRM_ALGO=y +CONFIG_XFRM_USER=y +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_MIGRATE=y +CONFIG_XFRM_STATISTICS=y +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_FIB_TRIE_STATS=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_ROUTE_CLASSID=y # CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE_DEMUX is not set -CONFIG_NET_IP_TUNNEL=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m +CONFIG_NET_IP_TUNNEL=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_NET_IPVTI is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_LRO=y -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +CONFIG_INET_UDP_DIAG=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set +CONFIG_TCP_MD5SIG=y CONFIG_IPV6=y -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_IPV6_MIP6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=y -CONFIG_INET6_XFRM_MODE_TUNNEL=y -CONFIG_INET6_XFRM_MODE_BEET=y -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=y -# CONFIG_IPV6_SIT_6RD is not set +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=y +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_SIT_6RD=y CONFIG_IPV6_NDISC_NODETYPE=y -# CONFIG_IPV6_TUNNEL is not set +CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_GRE is not set -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MROUTE is not set -# CONFIG_NETWORK_SECMARK is not set +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y +CONFIG_IPV6_PIMSM_V2=y +CONFIG_NETLABEL=y +CONFIG_NETWORK_SECMARK=y # CONFIG_NETWORK_PHY_TIMESTAMPING is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -659,50 +788,381 @@ # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK_ACCT is not set -# CONFIG_NETFILTER_NETLINK_QUEUE is not set -# CONFIG_NETFILTER_NETLINK_LOG is not set -# CONFIG_NF_CONNTRACK is not set -# CONFIG_NETFILTER_XTABLES is not set -# CONFIG_IP_VS is not set +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_ACCT=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_ZONES=y +CONFIG_NF_CONNTRACK_PROCFS=y +CONFIG_NF_CONNTRACK_EVENTS=y +# CONFIG_NF_CONNTRACK_TIMEOUT is not set +CONFIG_NF_CONNTRACK_TIMESTAMP=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_BROADCAST=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +# CONFIG_NF_CT_NETLINK_TIMEOUT is not set +# CONFIG_NETFILTER_NETLINK_QUEUE_CT is not set +CONFIG_NETFILTER_XTABLES=y + +# +# Xtables combined modules +# +CONFIG_NETFILTER_XT_MARK=m +CONFIG_NETFILTER_XT_CONNMARK=m +CONFIG_NETFILTER_XT_SET=m + +# +# Xtables targets +# +CONFIG_NETFILTER_XT_TARGET_AUDIT=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_CT=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m +# CONFIG_NETFILTER_XT_TARGET_HMARK is not set +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LED=m +CONFIG_NETFILTER_XT_TARGET_LOG=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TEE=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m + +# +# Xtables matches +# +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +# CONFIG_NETFILTER_XT_MATCH_BPF is not set +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_CPU=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ECN=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_IPVS=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_MAX=256 +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y +CONFIG_IP_VS_PROTO_SCTP=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS SH scheduler +# +CONFIG_IP_VS_SH_TAB_BITS=8 + +# +# IPVS application helper +# +CONFIG_IP_VS_NFCT=y +CONFIG_IP_VS_PE_SIP=m # # IP: Netfilter Configuration # -# CONFIG_NF_DEFRAG_IPV4 is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +# CONFIG_IP_NF_TARGET_SYNPROXY is not set +CONFIG_IP_NF_TARGET_ULOG=m +# CONFIG_NF_NAT_IPV4 is not set +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_SECURITY=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m # # IPv6: Netfilter Configuration # -# CONFIG_NF_DEFRAG_IPV6 is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_BRIDGE_NF_EBTABLES is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_RDS is not set +CONFIG_NF_DEFRAG_IPV6=m +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +# CONFIG_IP6_NF_TARGET_SYNPROXY is not set +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_SECURITY=m +# CONFIG_NF_NAT_IPV6 is not set +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_ULOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m + +# +# DCCP CCIDs Configuration +# +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=y +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_TFRC_LIB=y + +# +# DCCP Kernel Hacking +# +# CONFIG_IP_DCCP_DEBUG is not set +# CONFIG_NET_DCCPPROBE is not set +CONFIG_IP_SCTP=m +CONFIG_NET_SCTPPROBE=m +# CONFIG_SCTP_DBG_OBJCNT is not set +CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y +# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set +# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set +CONFIG_SCTP_COOKIE_HMAC_MD5=y +# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set +CONFIG_RDS=m +CONFIG_RDS_RDMA=m +CONFIG_RDS_TCP=m +# CONFIG_RDS_DEBUG is not set # CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_L2TP is not set +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +# CONFIG_ATM_CLIP_NO_ICMP is not set +CONFIG_ATM_LANE=m +# CONFIG_ATM_MPOA is not set +CONFIG_ATM_BR2684=m +# CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_L2TP=m +CONFIG_L2TP_DEBUGFS=m +CONFIG_L2TP_V3=y +CONFIG_L2TP_IP=m +CONFIG_L2TP_ETH=m CONFIG_STP=m +CONFIG_GARP=m CONFIG_BRIDGE=m CONFIG_BRIDGE_IGMP_SNOOPING=y +# CONFIG_BRIDGE_VLAN_FILTERING is not set CONFIG_HAVE_NET_DSA=y -# CONFIG_VLAN_8021Q is not set +CONFIG_NET_DSA=y +CONFIG_NET_DSA_TAG_DSA=y +CONFIG_NET_DSA_TAG_EDSA=y +CONFIG_NET_DSA_TAG_TRAILER=y +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +# CONFIG_VLAN_8021Q_MVRP is not set # CONFIG_DECNET is not set CONFIG_LLC=m # CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set +CONFIG_IPX=m +# CONFIG_IPX_INTERN is not set +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=m +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_PHONET is not set -# CONFIG_IEEE802154 is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set +CONFIG_IEEE802154=m +CONFIG_IEEE802154_6LOWPAN=m +# CONFIG_MAC802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFB=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +CONFIG_NET_SCH_MQPRIO=m +CONFIG_NET_SCH_CHOKE=m +CONFIG_NET_SCH_QFQ=m +# CONFIG_NET_SCH_CODEL is not set +# CONFIG_NET_SCH_FQ_CODEL is not set +# CONFIG_NET_SCH_FQ is not set +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_SCH_PLUG=m + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_CLS_CGROUP=y +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +# CONFIG_NET_EMATCH_IPSET is not set +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +CONFIG_NET_ACT_CSUM=m +CONFIG_NET_CLS_IND=y +CONFIG_NET_SCH_FIFO=y +CONFIG_DCB=y +CONFIG_DNS_RESOLVER=y # CONFIG_BATMAN_ADV is not set -# CONFIG_OPENVSWITCH is not set +CONFIG_OPENVSWITCH=m +CONFIG_OPENVSWITCH_GRE=y # CONFIG_VSOCKETS is not set # CONFIG_NETLINK_MMAP is not set # CONFIG_NETLINK_DIAG is not set @@ -710,27 +1170,164 @@ CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_XPS=y -# CONFIG_NETPRIO_CGROUP is not set +CONFIG_NETPRIO_CGROUP=m CONFIG_NET_RX_BUSY_POLL=y CONFIG_BQL=y -# CONFIG_BPF_JIT is not set +CONFIG_BPF_JIT=y CONFIG_NET_FLOW_LIMIT=y # # Network testing # -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set +CONFIG_NET_PKTGEN=m +# CONFIG_NET_TCPPROBE is not set +CONFIG_NET_DROP_MONITOR=y +CONFIG_HAMRADIO=y + +# +# Packet Radio protocols +# +CONFIG_AX25=m +CONFIG_AX25_DAMA_SLAVE=y +CONFIG_NETROM=m +CONFIG_ROSE=m + +# +# AX.25 network device drivers +# +CONFIG_MKISS=m +CONFIG_6PACK=m +CONFIG_BPQETHER=m +CONFIG_BAYCOM_SER_FDX=m +CONFIG_BAYCOM_SER_HDX=m +CONFIG_BAYCOM_PAR=m +CONFIG_YAM=m # CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +CONFIG_IRDA_FAST_RR=y +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m + +# +# Dongle support +# +CONFIG_DONGLE=y +CONFIG_ESI_DONGLE=m +CONFIG_ACTISYS_DONGLE=m +CONFIG_TEKRAM_DONGLE=m +CONFIG_TOIM3232_DONGLE=m +CONFIG_LITELINK_DONGLE=m +CONFIG_MA600_DONGLE=m +CONFIG_GIRBIL_DONGLE=m +CONFIG_MCP2120_DONGLE=m +CONFIG_OLD_BELKIN_DONGLE=m +CONFIG_ACT200L_DONGLE=m +CONFIG_KINGSUN_DONGLE=m +CONFIG_KSDAZZLE_DONGLE=m +CONFIG_KS959_DONGLE=m + +# +# FIR device drivers +# +CONFIG_USB_IRDA=m +CONFIG_SIGMATEL_FIR=m +CONFIG_NSC_FIR=m +CONFIG_WINBOND_FIR=m +CONFIG_SMC_IRCC_FIR=m +CONFIG_ALI_FIR=m +CONFIG_VLSI_FIR=m +CONFIG_VIA_FIR=m +CONFIG_MCS_FIR=m +CONFIG_BT=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTSDIO=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_ATH3K=y +CONFIG_BT_HCIUART_LL=y +# CONFIG_BT_HCIUART_3WIRE is not set +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIDTL1=m +CONFIG_BT_HCIBT3C=m +CONFIG_BT_HCIBLUECARD=m +CONFIG_BT_HCIBTUART=m +CONFIG_BT_HCIVHCI=m +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m +CONFIG_BT_ATH3K=m +CONFIG_AF_RXRPC=m +# CONFIG_AF_RXRPC_DEBUG is not set +# CONFIG_RXKAD is not set +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +CONFIG_CFG80211_DEBUGFS=y +# CONFIG_CFG80211_INTERNAL_REGDB is not set +CONFIG_CFG80211_WEXT=y +# CONFIG_LIB80211 is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_HAS_RC=y +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_MINSTREL_HT=y +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" +CONFIG_MAC80211_MESH=y +CONFIG_MAC80211_LEDS=y +CONFIG_MAC80211_DEBUGFS=y +# CONFIG_MAC80211_MESSAGE_TRACING is not set +# CONFIG_MAC80211_DEBUG_MENU is not set # CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set +CONFIG_RFKILL=m +CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y +CONFIG_NET_9P=m +CONFIG_NET_9P_VIRTIO=m +CONFIG_NET_9P_RDMA=m +# CONFIG_NET_9P_DEBUG is not set # CONFIG_CAIF is not set -# CONFIG_CEPH_LIB is not set +CONFIG_CEPH_LIB=m +# CONFIG_CEPH_LIB_PRETTYDEBUG is not set +# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set # CONFIG_NFC is not set CONFIG_HAVE_BPF_JIT=y @@ -743,7 +1340,7 @@ # CONFIG_UEVENT_HELPER_PATH="" CONFIG_DEVTMPFS=y -# CONFIG_DEVTMPFS_MOUNT is not set +CONFIG_DEVTMPFS_MOUNT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -751,71 +1348,210 @@ CONFIG_EXTRA_FIRMWARE="" CONFIG_FW_LOADER_USER_HELPER=y # CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set +CONFIG_DEBUG_DEVRES=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_GENERIC_CPU_DEVICES is not set -# CONFIG_DMA_SHARED_BUFFER is not set +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=m +CONFIG_DMA_SHARED_BUFFER=y # # Bus devices # CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y -# CONFIG_MTD is not set -# CONFIG_PARPORT is not set +CONFIG_MTD=m +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_REDBOOT_PARTS=m +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_AR7_PARTS=m + +# +# User Modules And Translation Layers +# +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +CONFIG_MTD_BLOCK_RO=m +CONFIG_FTL=m +CONFIG_NFTL=m +CONFIG_NFTL_RW=y +CONFIG_INFTL=m +CONFIG_RFD_FTL=m +CONFIG_SSFDC=m +# CONFIG_SM_FTL is not set +CONFIG_MTD_OOPS=m +CONFIG_MTD_SWAP=m + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=m +CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=m +CONFIG_MTD_CFI_AMDSTD=m +CONFIG_MTD_CFI_STAA=m +CONFIG_MTD_CFI_UTIL=m +CONFIG_MTD_RAM=m +CONFIG_MTD_ROM=m +CONFIG_MTD_ABSENT=m + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_SC520CDP=m +CONFIG_MTD_NETSC520=m +CONFIG_MTD_TS5500=m +# CONFIG_MTD_SBC_GXX is not set +# CONFIG_MTD_AMD76XROM is not set +# CONFIG_MTD_ICHXROM is not set +CONFIG_MTD_ESB2ROM=m +CONFIG_MTD_CK804XROM=m +CONFIG_MTD_SCB2_FLASH=m +# CONFIG_MTD_NETtel is not set +# CONFIG_MTD_L440GX is not set +CONFIG_MTD_PCI=m +# CONFIG_MTD_PCMCIA is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_LATCH_ADDR is not set + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_PMC551=m +# CONFIG_MTD_PMC551_BUGFIX is not set +# CONFIG_MTD_PMC551_DEBUG is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +CONFIG_MTD_MTDRAM=m +CONFIG_MTDRAM_TOTAL_SIZE=4096 +CONFIG_MTDRAM_ERASE_SIZE=128 +CONFIG_MTD_BLOCK2MTD=m + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOCG3 is not set +CONFIG_MTD_NAND_ECC=m +CONFIG_MTD_NAND_ECC_SMC=y +CONFIG_MTD_NAND=m +# CONFIG_MTD_NAND_ECC_BCH is not set +CONFIG_MTD_SM_COMMON=m +# CONFIG_MTD_NAND_DENALI is not set +CONFIG_MTD_NAND_IDS=m +CONFIG_MTD_NAND_RICOH=m +CONFIG_MTD_NAND_DISKONCHIP=m +# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set +CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 +# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set +# CONFIG_MTD_NAND_DOCG4 is not set +# CONFIG_MTD_NAND_CAFE is not set +CONFIG_MTD_NAND_NANDSIM=m +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +CONFIG_MTD_LPDDR=m +CONFIG_MTD_QINFO_PROBE=m +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_LIMIT=20 +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +CONFIG_PARPORT=m +CONFIG_PARPORT_PC=m +CONFIG_PARPORT_SERIAL=m +# CONFIG_PARPORT_PC_FIFO is not set +# CONFIG_PARPORT_PC_SUPERIO is not set +CONFIG_PARPORT_PC_PCMCIA=m +# CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_AX88796 is not set +CONFIG_PARPORT_1284=y +CONFIG_PARPORT_NOT_PC=y CONFIG_PNP=y -CONFIG_PNP_DEBUG_MESSAGES=y +# CONFIG_PNP_DEBUG_MESSAGES is not set # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set +CONFIG_BLK_DEV_FD=m +# CONFIG_PARIDE is not set +CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m +CONFIG_BLK_CPQ_DA=m +CONFIG_BLK_CPQ_CISS_DA=m +CONFIG_CISS_SCSI_TAPE=y +CONFIG_BLK_DEV_DAC960=m +CONFIG_BLK_DEV_UMEM=m # CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_DRBD is not set -# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m +# CONFIG_DRBD_FAULT_INJECTION is not set +CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_NVME is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -CONFIG_VIRTIO_BLK=y +CONFIG_BLK_DEV_OSD=m +CONFIG_BLK_DEV_SX8=m +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +CONFIG_ATA_OVER_ETH=m +CONFIG_VIRTIO_BLK=m # CONFIG_BLK_DEV_HD is not set -# CONFIG_BLK_DEV_RBD is not set +CONFIG_BLK_DEV_RBD=m # CONFIG_BLK_DEV_RSXX is not set # # Misc devices # -# CONFIG_SENSORS_LIS3LV02D is not set +CONFIG_SENSORS_LIS3LV02D=m # CONFIG_AD525X_DPOT is not set # CONFIG_DUMMY_IRQ is not set # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set +CONFIG_SGI_IOC4=m +CONFIG_TIFM_CORE=m +CONFIG_TIFM_7XX1=m # CONFIG_ICS932S401 is not set # CONFIG_ATMEL_SSC is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HP_ILO is not set -# CONFIG_APDS9802ALS is not set -# CONFIG_ISL29003 is not set -# CONFIG_ISL29020 is not set -# CONFIG_SENSORS_TSL2550 is not set +CONFIG_ENCLOSURE_SERVICES=m +CONFIG_HP_ILO=m +CONFIG_APDS9802ALS=m +CONFIG_ISL29003=m +CONFIG_ISL29020=m +CONFIG_SENSORS_TSL2550=m # CONFIG_SENSORS_BH1780 is not set -# CONFIG_SENSORS_BH1770 is not set -# CONFIG_SENSORS_APDS990X is not set +CONFIG_SENSORS_BH1770=m +CONFIG_SENSORS_APDS990X=m # CONFIG_HMC6352 is not set # CONFIG_DS1682 is not set # CONFIG_BMP085_I2C is not set -# CONFIG_PCH_PHUB is not set +CONFIG_PCH_PHUB=m # CONFIG_USB_SWITCH_FSA9480 is not set # CONFIG_SRAM is not set # CONFIG_C2PORT is not set @@ -823,21 +1559,25 @@ # # EEPROM support # -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_EEPROM_MAX6875 is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_CB710_CORE is not set +CONFIG_EEPROM_AT24=m +CONFIG_EEPROM_LEGACY=m +CONFIG_EEPROM_MAX6875=m +CONFIG_EEPROM_93CX6=m +CONFIG_CB710_CORE=m +# CONFIG_CB710_DEBUG is not set +CONFIG_CB710_DEBUG_ASSUMPTIONS=y # # Texas Instruments shared transport line discipline # -# CONFIG_SENSORS_LIS3_I2C is not set +CONFIG_SENSORS_LIS3_I2C=m # # Altera FPGA firmware download module # -# CONFIG_ALTERA_STAPL is not set +CONFIG_ALTERA_STAPL=m +# CONFIG_INTEL_MEI is not set +# CONFIG_INTEL_MEI_ME is not set # CONFIG_VMWARE_VMCI is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -849,8 +1589,8 @@ CONFIG_RAID_ATTRS=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_TGT=m +CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # @@ -858,30 +1598,33 @@ # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m -# CONFIG_CHR_DEV_OSST is not set +CONFIG_CHR_DEV_OSST=y CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_ENCLOSURE=m CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y # # SCSI Transports # -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_FC_ATTRS=m +CONFIG_SCSI_FC_TGT_ATTRS=y +CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=y -CONFIG_SCSI_SAS_LIBSAS=y +CONFIG_SCSI_SAS_LIBSAS=m CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_SAS_HOST_SMP=y -# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set -# CONFIG_ISCSI_BOOT_SYSFS is not set +CONFIG_ISCSI_BOOT_SYSFS=m # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_CXGB4_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set @@ -904,55 +1647,70 @@ # CONFIG_SCSI_ARCMSR is not set # CONFIG_SCSI_ESAS2R is not set CONFIG_MEGARAID_NEWGEN=y -# CONFIG_MEGARAID_MM is not set -CONFIG_MEGARAID_LEGACY=m -CONFIG_MEGARAID_SAS=m -CONFIG_SCSI_MPT2SAS=m +CONFIG_MEGARAID_MM=y +# CONFIG_MEGARAID_MAILBOX is not set +CONFIG_MEGARAID_LEGACY=y +CONFIG_MEGARAID_SAS=y +CONFIG_SCSI_MPT2SAS=y CONFIG_SCSI_MPT2SAS_MAX_SGE=128 -# CONFIG_SCSI_MPT2SAS_LOGGING is not set -CONFIG_SCSI_MPT3SAS=m -CONFIG_SCSI_MPT3SAS_MAX_SGE=128 -# CONFIG_SCSI_MPT3SAS_LOGGING is not set +CONFIG_SCSI_MPT2SAS_LOGGING=y +# CONFIG_SCSI_MPT3SAS is not set # CONFIG_SCSI_UFSHCD is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_VMWARE_PVSCSI is not set -# CONFIG_LIBFC is not set -# CONFIG_LIBFCOE is not set -# CONFIG_FCOE is not set -# CONFIG_FCOE_FNIC is not set +CONFIG_LIBFC=m +CONFIG_LIBFCOE=m +CONFIG_FCOE=m +CONFIG_FCOE_FNIC=m # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -CONFIG_SCSI_ISCI=y -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set +CONFIG_SCSI_GDTH=m +CONFIG_SCSI_ISCI=m +CONFIG_SCSI_IPS=m +CONFIG_SCSI_INITIO=m +CONFIG_SCSI_INIA100=m +# CONFIG_SCSI_PPA is not set +# CONFIG_SCSI_IMM is not set +CONFIG_SCSI_STEX=m +CONFIG_SCSI_SYM53C8XX_2=m +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +CONFIG_SCSI_SYM53C8XX_MMIO=y # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_PMCRAID is not set -# CONFIG_SCSI_PM8001 is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_SCSI_BFA_FC is not set -# CONFIG_SCSI_VIRTIO is not set +CONFIG_SCSI_QLOGIC_1280=m +CONFIG_SCSI_QLA_FC=m +# CONFIG_TCM_QLA2XXX is not set +CONFIG_SCSI_QLA_ISCSI=m +CONFIG_SCSI_LPFC=m +# CONFIG_SCSI_LPFC_DEBUG_FS is not set +CONFIG_SCSI_DC395x=m +CONFIG_SCSI_DC390T=m +CONFIG_SCSI_DEBUG=m +CONFIG_SCSI_PMCRAID=m +CONFIG_SCSI_PM8001=m +CONFIG_SCSI_SRP=m +CONFIG_SCSI_BFA_FC=m +CONFIG_SCSI_VIRTIO=m # CONFIG_SCSI_CHELSIO_FCOE is not set -# CONFIG_SCSI_DH is not set -# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +CONFIG_SCSI_DH=y +CONFIG_SCSI_DH_RDAC=m +CONFIG_SCSI_DH_HP_SW=m +CONFIG_SCSI_DH_EMC=m +CONFIG_SCSI_DH_ALUA=m +CONFIG_SCSI_OSD_INITIATOR=m +CONFIG_SCSI_OSD_ULD=m +CONFIG_SCSI_OSD_DPRINT_SENSE=1 +# CONFIG_SCSI_OSD_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set -# CONFIG_ATA_VERBOSE_ERROR is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_ATA_ACPI=y # CONFIG_SATA_ZPODD is not set -# CONFIG_SATA_PMP is not set +CONFIG_SATA_PMP=y # # Controllers with non-SFF native interface @@ -962,124 +1720,56 @@ # CONFIG_SATA_INIC162X is not set # CONFIG_SATA_ACARD_AHCI is not set # CONFIG_SATA_SIL24 is not set -CONFIG_ATA_SFF=y - -# -# SFF controllers with custom DMA interface -# -# CONFIG_PDC_ADMA is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_SX4 is not set -CONFIG_ATA_BMDMA=y - -# -# SATA SFF controllers with BMDMA -# -CONFIG_ATA_PIIX=y -# CONFIG_SATA_HIGHBANK is not set -# CONFIG_SATA_MV is not set -# CONFIG_SATA_NV is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_RCAR is not set -# CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_SVW is not set -# CONFIG_SATA_ULI is not set -# CONFIG_SATA_VIA is not set -# CONFIG_SATA_VITESSE is not set - -# -# PATA SFF controllers with BMDMA -# -# CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_ATP867X is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CS5520 is not set -# CONFIG_PATA_CS5530 is not set -# CONFIG_PATA_CS5536 is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NINJA32 is not set -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RDC is not set -# CONFIG_PATA_SC1200 is not set -# CONFIG_PATA_SCH is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_TOSHIBA is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set - -# -# PIO-only SFF controllers -# -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_PLATFORM is not set -# CONFIG_PATA_RZ1000 is not set - -# -# Generic fallback / legacy drivers -# -# CONFIG_PATA_ACPI is not set -# CONFIG_ATA_GENERIC is not set -# CONFIG_PATA_LEGACY is not set +# CONFIG_ATA_SFF is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_AUTODETECT=y -# CONFIG_MD_LINEAR is not set -# CONFIG_MD_RAID0 is not set -CONFIG_MD_RAID1=y -CONFIG_MD_RAID10=y -CONFIG_MD_RAID456=y -# CONFIG_MD_MULTIPATH is not set -# CONFIG_MD_FAULTY is not set +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m # CONFIG_BCACHE is not set CONFIG_BLK_DEV_DM_BUILTIN=y CONFIG_BLK_DEV_DM=y -# CONFIG_DM_DEBUG is not set -# CONFIG_DM_CRYPT is not set +CONFIG_DM_DEBUG=y +CONFIG_DM_BUFIO=m +CONFIG_DM_BIO_PRISON=m +CONFIG_DM_PERSISTENT_DATA=m +CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=y -# CONFIG_DM_THIN_PROVISIONING is not set +CONFIG_DM_THIN_PROVISIONING=m +# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set # CONFIG_DM_CACHE is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_RAID is not set -# CONFIG_DM_ZERO is not set -# CONFIG_DM_MULTIPATH is not set +CONFIG_DM_MIRROR=y +CONFIG_DM_RAID=m +CONFIG_DM_LOG_USERSPACE=m +CONFIG_DM_ZERO=y +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m # CONFIG_DM_DELAY is not set -# CONFIG_DM_UEVENT is not set -# CONFIG_DM_FLAKEY is not set -# CONFIG_DM_VERITY is not set +CONFIG_DM_UEVENT=y +CONFIG_DM_FLAKEY=m +CONFIG_DM_VERITY=m # CONFIG_DM_SWITCH is not set -# CONFIG_TARGET_CORE is not set +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m +CONFIG_LOOPBACK_TARGET=m +CONFIG_TCM_FC=m +CONFIG_ISCSI_TARGET=m CONFIG_FUSION=y -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -CONFIG_FUSION_SAS=y -CONFIG_FUSION_MAX_SGE=128 -# CONFIG_FUSION_CTL is not set -# CONFIG_FUSION_LOGGING is not set +CONFIG_FUSION_SPI=m +CONFIG_FUSION_FC=m +CONFIG_FUSION_SAS=m +CONFIG_FUSION_MAX_SGE=40 +CONFIG_FUSION_CTL=m +CONFIG_FUSION_LAN=m +CONFIG_FUSION_LOGGING=y # # IEEE 1394 (FireWire) support @@ -1089,54 +1779,78 @@ # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_MII=m CONFIG_NET_CORE=y -# CONFIG_BONDING is not set -# CONFIG_DUMMY is not set -# CONFIG_EQUALIZER is not set -# CONFIG_NET_FC is not set -# CONFIG_NET_TEAM is not set -# CONFIG_MACVLAN is not set +CONFIG_BONDING=m +CONFIG_DUMMY=m +CONFIG_EQUALIZER=m +CONFIG_NET_FC=y +CONFIG_IFB=m +CONFIG_NET_TEAM=m +# CONFIG_NET_TEAM_MODE_BROADCAST is not set +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +# CONFIG_NET_TEAM_MODE_RANDOM is not set +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +# CONFIG_NET_TEAM_MODE_LOADBALANCE is not set +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m # CONFIG_VXLAN is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -CONFIG_TUN=y -# CONFIG_VETH is not set -CONFIG_VIRTIO_NET=y +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +CONFIG_TUN=m +CONFIG_VETH=m +CONFIG_VIRTIO_NET=m # CONFIG_NLMON is not set # CONFIG_ARCNET is not set +CONFIG_ATM_DRIVERS=y +# CONFIG_ATM_DUMMY is not set +CONFIG_ATM_TCP=m +# CONFIG_ATM_LANAI is not set +CONFIG_ATM_ENI=m +# CONFIG_ATM_ENI_DEBUG is not set +# CONFIG_ATM_ENI_TUNE_BURST is not set +CONFIG_ATM_FIRESTREAM=m +# CONFIG_ATM_ZATM is not set +CONFIG_ATM_NICSTAR=m +# CONFIG_ATM_NICSTAR_USE_SUNI is not set +# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set +# CONFIG_ATM_IDT77252 is not set +# CONFIG_ATM_AMBASSADOR is not set +# CONFIG_ATM_HORIZON is not set +# CONFIG_ATM_IA is not set +# CONFIG_ATM_FORE200E is not set +CONFIG_ATM_HE=m +# CONFIG_ATM_HE_USE_SUNI is not set +CONFIG_ATM_SOLOS=m # # CAIF transport drivers # CONFIG_VHOST_NET=m +# CONFIG_VHOST_SCSI is not set CONFIG_VHOST_RING=m CONFIG_VHOST=m # # Distributed Switch Architecture drivers # -# CONFIG_NET_DSA_MV88E6XXX is not set -# CONFIG_NET_DSA_MV88E6060 is not set -# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set -# CONFIG_NET_DSA_MV88E6131 is not set -# CONFIG_NET_DSA_MV88E6123_61_65 is not set +CONFIG_NET_DSA_MV88E6XXX=y +CONFIG_NET_DSA_MV88E6060=y +CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y +CONFIG_NET_DSA_MV88E6131=y +CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_ETHERNET=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_ADAPTEC is not set # CONFIG_NET_VENDOR_ALTEON is not set -CONFIG_NET_VENDOR_AMD=y -# CONFIG_AMD8111_ETH is not set -# CONFIG_PCNET32 is not set -CONFIG_NET_VENDOR_ARC=y +# CONFIG_NET_VENDOR_AMD is not set +# CONFIG_NET_VENDOR_ARC is not set # CONFIG_NET_VENDOR_ATHEROS is not set # CONFIG_NET_CADENCE is not set -CONFIG_NET_VENDOR_BROADCOM=y -# CONFIG_B44 is not set -# CONFIG_BNX2 is not set -# CONFIG_CNIC is not set -CONFIG_TIGON3=y -# CONFIG_BNX2X is not set +# CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_BROCADE is not set # CONFIG_NET_CALXEDA_XGMAC is not set # CONFIG_NET_VENDOR_CHELSIO is not set @@ -1146,23 +1860,29 @@ # CONFIG_NET_VENDOR_DLINK is not set # CONFIG_NET_VENDOR_EMULEX is not set # CONFIG_NET_VENDOR_EXAR is not set +# CONFIG_NET_VENDOR_FUJITSU is not set # CONFIG_NET_VENDOR_HP is not set CONFIG_NET_VENDOR_INTEL=y # CONFIG_E100 is not set CONFIG_E1000=m -CONFIG_E1000E=y -CONFIG_IGB=y +CONFIG_E1000E=m +CONFIG_IGB=m CONFIG_IGB_HWMON=y -# CONFIG_IGBVF is not set +CONFIG_IGB_DCA=y +CONFIG_IGBVF=m # CONFIG_IXGB is not set # CONFIG_IXGBE is not set # CONFIG_IXGBEVF is not set # CONFIG_I40E is not set -CONFIG_NET_VENDOR_I825XX=y +# CONFIG_NET_VENDOR_I825XX is not set # CONFIG_IP1000 is not set # CONFIG_JME is not set # CONFIG_NET_VENDOR_MARVELL is not set -# CONFIG_NET_VENDOR_MELLANOX is not set +CONFIG_NET_VENDOR_MELLANOX=y +# CONFIG_MLX4_EN is not set +CONFIG_MLX4_CORE=m +CONFIG_MLX4_DEBUG=y +# CONFIG_MLX5_CORE is not set # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_MYRI is not set # CONFIG_FEALNX is not set @@ -1186,6 +1906,7 @@ # CONFIG_NET_VENDOR_TI is not set # CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_NET_VENDOR_XIRCOM is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_NET_SB1000 is not set @@ -1195,43 +1916,87 @@ # MII PHY device drivers # # CONFIG_AT803X_PHY is not set -# CONFIG_AMD_PHY is not set -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set +CONFIG_AMD_PHY=m +CONFIG_MARVELL_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_LXT_PHY=m +CONFIG_CICADA_PHY=m +CONFIG_VITESSE_PHY=m +CONFIG_SMSC_PHY=m +CONFIG_BROADCOM_PHY=m # CONFIG_BCM87XX_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_MICREL_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -# CONFIG_PPP is not set +CONFIG_ICPLUS_PHY=m +CONFIG_REALTEK_PHY=m +CONFIG_NATIONAL_PHY=m +CONFIG_STE10XP=m +CONFIG_LSI_ET1011C_PHY=m +CONFIG_MICREL_PHY=m +CONFIG_FIXED_PHY=y +CONFIG_MDIO_BITBANG=m +# CONFIG_PLIP is not set +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOATM=m +CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m # CONFIG_SLIP is not set +CONFIG_SLHC=m # # USB Network Adapters # -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m # CONFIG_USB_RTL8152 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_IPHETH is not set +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_AX88179_178A=m +CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_CDC_EEM=m +CONFIG_USB_NET_CDC_NCM=m +# CONFIG_USB_NET_CDC_MBIM is not set +CONFIG_USB_NET_DM9601=m +# CONFIG_USB_NET_SR9700 is not set +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m +CONFIG_USB_NET_CX82310_ETH=m +CONFIG_USB_NET_KALMIA=m +CONFIG_USB_NET_QMI_WWAN=m +CONFIG_USB_HSO=m +CONFIG_USB_NET_INT51X1=m +CONFIG_USB_IPHETH=m +CONFIG_USB_SIERRA_NET=m +CONFIG_USB_VL600=m # CONFIG_WLAN is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # CONFIG_WAN is not set +# CONFIG_IEEE802154_DRIVERS is not set # CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set @@ -1239,9 +2004,9 @@ # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set -# CONFIG_INPUT_SPARSEKMAP is not set +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_POLLDEV=m +CONFIG_INPUT_SPARSEKMAP=m # CONFIG_INPUT_MATRIXKMAP is not set # @@ -1251,7 +2016,7 @@ # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -1267,6 +2032,7 @@ # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_TCA8418 is not set +# CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_LM8333 is not set # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_MCS is not set @@ -1278,41 +2044,152 @@ # CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_PS2_ALPS is not set -# CONFIG_MOUSE_PS2_LOGIPS2PP is not set -# CONFIG_MOUSE_PS2_SYNAPTICS is not set +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_CYPRESS=y -# CONFIG_MOUSE_PS2_LIFEBOOK is not set -# CONFIG_MOUSE_PS2_TRACKPOINT is not set -# CONFIG_MOUSE_PS2_ELANTECH is not set -# CONFIG_MOUSE_PS2_SENTELIC is not set +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_MOUSE_PS2_SENTELIC=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set -# CONFIG_MOUSE_BCM5974 is not set +CONFIG_MOUSE_SERIAL=m +CONFIG_MOUSE_APPLETOUCH=m +CONFIG_MOUSE_BCM5974=m # CONFIG_MOUSE_CYAPA is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_MOUSE_SYNAPTICS_I2C is not set -# CONFIG_MOUSE_SYNAPTICS_USB is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +CONFIG_MOUSE_VSXXXAA=m +CONFIG_MOUSE_SYNAPTICS_I2C=m +CONFIG_MOUSE_SYNAPTICS_USB=m +CONFIG_INPUT_JOYSTICK=y +CONFIG_JOYSTICK_ANALOG=m +CONFIG_JOYSTICK_A3D=m +CONFIG_JOYSTICK_ADI=m +CONFIG_JOYSTICK_COBRA=m +CONFIG_JOYSTICK_GF2K=m +CONFIG_JOYSTICK_GRIP=m +CONFIG_JOYSTICK_GRIP_MP=m +CONFIG_JOYSTICK_GUILLEMOT=m +CONFIG_JOYSTICK_INTERACT=m +CONFIG_JOYSTICK_SIDEWINDER=m +CONFIG_JOYSTICK_TMDC=m +CONFIG_JOYSTICK_IFORCE=m +CONFIG_JOYSTICK_IFORCE_USB=y +CONFIG_JOYSTICK_IFORCE_232=y +CONFIG_JOYSTICK_WARRIOR=m +CONFIG_JOYSTICK_MAGELLAN=m +CONFIG_JOYSTICK_SPACEORB=m +CONFIG_JOYSTICK_SPACEBALL=m +CONFIG_JOYSTICK_STINGER=m +CONFIG_JOYSTICK_TWIDJOY=m +CONFIG_JOYSTICK_ZHENHUA=m +CONFIG_JOYSTICK_DB9=m +CONFIG_JOYSTICK_GAMECON=m +CONFIG_JOYSTICK_TURBOGRAFX=m +# CONFIG_JOYSTICK_AS5011 is not set +CONFIG_JOYSTICK_JOYDUMP=m +CONFIG_JOYSTICK_XPAD=m +CONFIG_JOYSTICK_XPAD_FF=y +CONFIG_JOYSTICK_XPAD_LEDS=y +CONFIG_JOYSTICK_WALKERA0701=m +CONFIG_INPUT_TABLET=y +CONFIG_TABLET_USB_ACECAD=m +CONFIG_TABLET_USB_AIPTEK=m +CONFIG_TABLET_USB_GTCO=m +CONFIG_TABLET_USB_HANWANG=m +CONFIG_TABLET_USB_KBTAB=m +CONFIG_TABLET_USB_WACOM=m +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879 is not set +CONFIG_TOUCHSCREEN_ATMEL_MXT=m +# CONFIG_TOUCHSCREEN_BU21013 is not set +# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set +# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set +CONFIG_TOUCHSCREEN_DYNAPRO=m +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set +CONFIG_TOUCHSCREEN_EETI=m +CONFIG_TOUCHSCREEN_FUJITSU=m +CONFIG_TOUCHSCREEN_ILI210X=m +CONFIG_TOUCHSCREEN_GUNZE=m +CONFIG_TOUCHSCREEN_ELO=m +CONFIG_TOUCHSCREEN_WACOM_W8001=m +# CONFIG_TOUCHSCREEN_WACOM_I2C is not set +# CONFIG_TOUCHSCREEN_MAX11801 is not set +CONFIG_TOUCHSCREEN_MCS5000=m +# CONFIG_TOUCHSCREEN_MMS114 is not set +CONFIG_TOUCHSCREEN_MTOUCH=m +CONFIG_TOUCHSCREEN_INEXIO=m +CONFIG_TOUCHSCREEN_MK712=m +CONFIG_TOUCHSCREEN_PENMOUNT=m +# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set +CONFIG_TOUCHSCREEN_TOUCHRIGHT=m +CONFIG_TOUCHSCREEN_TOUCHWIN=m +CONFIG_TOUCHSCREEN_PIXCIR=m +CONFIG_TOUCHSCREEN_USB_COMPOSITE=m +CONFIG_TOUCHSCREEN_USB_EGALAX=y +CONFIG_TOUCHSCREEN_USB_PANJIT=y +CONFIG_TOUCHSCREEN_USB_3M=y +CONFIG_TOUCHSCREEN_USB_ITM=y +CONFIG_TOUCHSCREEN_USB_ETURBO=y +CONFIG_TOUCHSCREEN_USB_GUNZE=y +CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y +CONFIG_TOUCHSCREEN_USB_IRTOUCH=y +CONFIG_TOUCHSCREEN_USB_IDEALTEK=y +CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y +CONFIG_TOUCHSCREEN_USB_GOTOP=y +CONFIG_TOUCHSCREEN_USB_JASTEC=y +CONFIG_TOUCHSCREEN_USB_ELO=y +CONFIG_TOUCHSCREEN_USB_E2I=y +CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y +CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y +CONFIG_TOUCHSCREEN_USB_NEXIO=y +CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y +CONFIG_TOUCHSCREEN_TOUCHIT213=m +CONFIG_TOUCHSCREEN_TSC_SERIO=m +CONFIG_TOUCHSCREEN_TSC2007=m +CONFIG_TOUCHSCREEN_ST1232=m +# CONFIG_TOUCHSCREEN_TPS6507X is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_BMA150 is not set +CONFIG_INPUT_PCSPKR=m +CONFIG_INPUT_MMA8450=m +CONFIG_INPUT_MPU3050=m +CONFIG_INPUT_APANEL=m +CONFIG_INPUT_ATLAS_BTNS=m +CONFIG_INPUT_ATI_REMOTE2=m +CONFIG_INPUT_KEYSPAN_REMOTE=m +CONFIG_INPUT_KXTJ9=m +# CONFIG_INPUT_KXTJ9_POLLED_MODE is not set +CONFIG_INPUT_POWERMATE=m +CONFIG_INPUT_YEALINK=m +CONFIG_INPUT_CM109=m +CONFIG_INPUT_UINPUT=m +# CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_IMS_PCU is not set +CONFIG_INPUT_CMA3000=m +CONFIG_INPUT_CMA3000_I2C=m +# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_SERIO_ALTERA_PS2 is not set +CONFIG_SERIO_RAW=m +CONFIG_SERIO_ALTERA_PS2=m # CONFIG_SERIO_PS2MULT is not set # CONFIG_SERIO_ARC_PS2 is not set -# CONFIG_GAMEPORT is not set +CONFIG_GAMEPORT=m +CONFIG_GAMEPORT_NS558=m +CONFIG_GAMEPORT_L4=m +CONFIG_GAMEPORT_EMU10K1=m +CONFIG_GAMEPORT_FM801=m # # Character devices @@ -1321,21 +2198,32 @@ CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y # CONFIG_LEGACY_PTYS is not set -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set -# CONFIG_N_GSM is not set +CONFIG_SERIAL_NONSTANDARD=y +CONFIG_ROCKETPORT=m +CONFIG_CYCLADES=m +# CONFIG_CYZ_INTR is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +CONFIG_SYNCLINK=m +CONFIG_SYNCLINKMP=m +CONFIG_SYNCLINK_GT=m +CONFIG_NOZOMI=m +# CONFIG_ISI is not set +CONFIG_N_HDLC=m +CONFIG_N_GSM=m # CONFIG_TRACE_SINK is not set # # KCopy # -# CONFIG_KCOPY is not set -CONFIG_DEVKMEM=y +CONFIG_KCOPY=m +# CONFIG_DEVKMEM is not set # # Serial drivers @@ -1345,10 +2233,16 @@ CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y +CONFIG_SERIAL_8250_DMA=y CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_CS=m +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=32 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +CONFIG_SERIAL_8250_RSA=y # CONFIG_SERIAL_8250_DW is not set # @@ -1357,7 +2251,7 @@ # CONFIG_SERIAL_MFD_HSU is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_JSM=m # CONFIG_SERIAL_SCCNXP is not set # CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set @@ -1367,32 +2261,58 @@ # CONFIG_SERIAL_RP2 is not set # CONFIG_SERIAL_FSL_LPUART is not set # CONFIG_SERIAL_ST_ASC is not set -# CONFIG_TTY_PRINTK is not set -# CONFIG_VIRTIO_CONSOLE is not set -# CONFIG_IPMI_HANDLER is not set +CONFIG_PRINTER=m +CONFIG_LP_CONSOLE=y +CONFIG_PPDEV=m +CONFIG_HVC_DRIVER=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_IPMI_HANDLER=m +# CONFIG_IPMI_PANIC_EVENT is not set +CONFIG_IPMI_DEVICE_INTERFACE=m +CONFIG_IPMI_SI=m +CONFIG_IPMI_WATCHDOG=m +CONFIG_IPMI_POWEROFF=m CONFIG_HW_RANDOM=y -# CONFIG_HW_RANDOM_TIMERIOMEM is not set -CONFIG_HW_RANDOM_INTEL=y -# CONFIG_HW_RANDOM_AMD is not set -# CONFIG_HW_RANDOM_VIA is not set -CONFIG_HW_RANDOM_VIRTIO=y -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set +CONFIG_HW_RANDOM_TIMERIOMEM=m +CONFIG_HW_RANDOM_INTEL=m +CONFIG_HW_RANDOM_AMD=m +CONFIG_HW_RANDOM_VIA=m +CONFIG_HW_RANDOM_VIRTIO=m +CONFIG_HW_RANDOM_TPM=m +CONFIG_NVRAM=y +CONFIG_R3964=m # CONFIG_APPLICOM is not set -# CONFIG_MWAVE is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HPET is not set -# CONFIG_HANGCHECK_TIMER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +CONFIG_CARDMAN_4000=m +CONFIG_CARDMAN_4040=m +CONFIG_IPWIRELESS=m +CONFIG_MWAVE=m +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=8192 +CONFIG_HPET=y +# CONFIG_HPET_MMAP is not set +CONFIG_HANGCHECK_TIMER=m +CONFIG_TCG_TPM=m +CONFIG_TCG_TIS=m +# CONFIG_TCG_TIS_I2C_INFINEON is not set +CONFIG_TCG_NSC=m +CONFIG_TCG_ATMEL=m +CONFIG_TCG_INFINEON=m +CONFIG_TELCLOCK=m CONFIG_DEVPORT=y -CONFIG_I2C=y +CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_COMPAT is not set -# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=m # CONFIG_I2C_MUX is not set CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_SMBUS=m +CONFIG_I2C_ALGOBIT=m +CONFIG_I2C_ALGOPCA=m # # I2C Hardware Bus support @@ -1404,23 +2324,25 @@ # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set +CONFIG_I2C_AMD756=m +CONFIG_I2C_AMD756_S4882=m +CONFIG_I2C_AMD8111=m CONFIG_I2C_I801=m CONFIG_I2C_ISCH=m -CONFIG_I2C_ISMT=m -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_ISMT is not set +CONFIG_I2C_PIIX4=m +CONFIG_I2C_NFORCE2=m +CONFIG_I2C_NFORCE2_S4985=m # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set +CONFIG_I2C_SIS96X=m +CONFIG_I2C_VIA=m +CONFIG_I2C_VIAPRO=m # # ACPI drivers # -# CONFIG_I2C_SCMI is not set +CONFIG_I2C_SCMI=m # # I2C system bus drivers (mostly embedded / system-on-chip) @@ -1428,23 +2350,24 @@ # CONFIG_I2C_DESIGNWARE_PCI is not set # CONFIG_I2C_EG20T is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PCA_PLATFORM is not set +CONFIG_I2C_PCA_PLATFORM=m # CONFIG_I2C_PXA_PCI is not set -# CONFIG_I2C_SIMTEC is not set +CONFIG_I2C_SIMTEC=m # CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # -# CONFIG_I2C_DIOLAN_U2C is not set -# CONFIG_I2C_PARPORT_LIGHT is not set +CONFIG_I2C_DIOLAN_U2C=m +CONFIG_I2C_PARPORT=m +CONFIG_I2C_PARPORT_LIGHT=m # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set +CONFIG_I2C_TINY_USB=m # # Other I2C/SMBus bus drivers # -# CONFIG_I2C_STUB is not set +CONFIG_I2C_STUB=m # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -1454,15 +2377,16 @@ # # PPS support # -CONFIG_PPS=y +CONFIG_PPS=m # CONFIG_PPS_DEBUG is not set # # PPS clients support # # CONFIG_PPS_CLIENT_KTIMER is not set -# CONFIG_PPS_CLIENT_LDISC is not set -# CONFIG_PPS_CLIENT_GPIO is not set +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_PARPORT=m +CONFIG_PPS_CLIENT_GPIO=m # # PPS generators support @@ -1471,12 +2395,12 @@ # # PTP clock support # -CONFIG_PTP_1588_CLOCK=y +CONFIG_PTP_1588_CLOCK=m # # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # -# CONFIG_PTP_1588_CLOCK_PCH is not set +CONFIG_PTP_1588_CLOCK_PCH=m CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIO_DEVRES=y # CONFIG_GPIOLIB is not set @@ -1495,128 +2419,143 @@ # CONFIG_CHARGER_MAX8903 is not set # CONFIG_CHARGER_LP8727 is not set # CONFIG_CHARGER_BQ2415X is not set -# CONFIG_CHARGER_SMB347 is not set +CONFIG_CHARGER_SMB347=m # CONFIG_POWER_RESET is not set # CONFIG_POWER_AVS is not set CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set +CONFIG_HWMON_VID=m # CONFIG_HWMON_DEBUG_CHIP is not set # # Native drivers # -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_ABITUGURU3 is not set -# CONFIG_SENSORS_AD7414 is not set -# CONFIG_SENSORS_AD7418 is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1029 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set +CONFIG_SENSORS_ABITUGURU=m +CONFIG_SENSORS_ABITUGURU3=m +CONFIG_SENSORS_AD7414=m +CONFIG_SENSORS_AD7418=m +CONFIG_SENSORS_ADM1021=m +CONFIG_SENSORS_ADM1025=m +CONFIG_SENSORS_ADM1026=m +CONFIG_SENSORS_ADM1029=m +CONFIG_SENSORS_ADM1031=m +CONFIG_SENSORS_ADM9240=m # CONFIG_SENSORS_ADT7410 is not set -# CONFIG_SENSORS_ADT7411 is not set -# CONFIG_SENSORS_ADT7462 is not set -# CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7475 is not set -# CONFIG_SENSORS_ASC7621 is not set -# CONFIG_SENSORS_K8TEMP is not set -# CONFIG_SENSORS_K10TEMP is not set -# CONFIG_SENSORS_FAM15H_POWER is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS620 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_I5K_AMB is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_F71882FG is not set -# CONFIG_SENSORS_F75375S is not set -# CONFIG_SENSORS_FSCHMD is not set -# CONFIG_SENSORS_G760A is not set +CONFIG_SENSORS_ADT7411=m +CONFIG_SENSORS_ADT7462=m +CONFIG_SENSORS_ADT7470=m +CONFIG_SENSORS_ADT7475=m +CONFIG_SENSORS_ASC7621=m +CONFIG_SENSORS_K8TEMP=m +CONFIG_SENSORS_K10TEMP=m +CONFIG_SENSORS_FAM15H_POWER=m +CONFIG_SENSORS_ASB100=m +CONFIG_SENSORS_ATXP1=m +CONFIG_SENSORS_DS620=m +CONFIG_SENSORS_DS1621=m +CONFIG_SENSORS_I5K_AMB=m +CONFIG_SENSORS_F71805F=m +CONFIG_SENSORS_F71882FG=m +CONFIG_SENSORS_F75375S=m +CONFIG_SENSORS_FSCHMD=m +CONFIG_SENSORS_G760A=m # CONFIG_SENSORS_G762 is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set +CONFIG_SENSORS_GL518SM=m +CONFIG_SENSORS_GL520SM=m # CONFIG_SENSORS_HIH6130 is not set # CONFIG_SENSORS_HTU21 is not set CONFIG_SENSORS_CORETEMP=m -# CONFIG_SENSORS_IT87 is not set +CONFIG_SENSORS_IBMAEM=m +CONFIG_SENSORS_IBMPEX=m +CONFIG_SENSORS_IT87=m # CONFIG_SENSORS_JC42 is not set -# CONFIG_SENSORS_LINEAGE is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM73 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_LM93 is not set -# CONFIG_SENSORS_LTC4151 is not set -# CONFIG_SENSORS_LTC4215 is not set -# CONFIG_SENSORS_LTC4245 is not set -# CONFIG_SENSORS_LTC4261 is not set +CONFIG_SENSORS_LINEAGE=m +CONFIG_SENSORS_LM63=m +CONFIG_SENSORS_LM73=m +CONFIG_SENSORS_LM75=m +CONFIG_SENSORS_LM77=m +CONFIG_SENSORS_LM78=m +CONFIG_SENSORS_LM80=m +CONFIG_SENSORS_LM83=m +CONFIG_SENSORS_LM85=m +CONFIG_SENSORS_LM87=m +CONFIG_SENSORS_LM90=m +CONFIG_SENSORS_LM92=m +CONFIG_SENSORS_LM93=m +CONFIG_SENSORS_LTC4151=m +CONFIG_SENSORS_LTC4215=m +CONFIG_SENSORS_LTC4245=m +CONFIG_SENSORS_LTC4261=m # CONFIG_SENSORS_LM95234 is not set -# CONFIG_SENSORS_LM95241 is not set -# CONFIG_SENSORS_LM95245 is not set -# CONFIG_SENSORS_MAX16065 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_MAX1668 is not set +CONFIG_SENSORS_LM95241=m +CONFIG_SENSORS_LM95245=m +CONFIG_SENSORS_MAX16065=m +CONFIG_SENSORS_MAX1619=m +CONFIG_SENSORS_MAX1668=m # CONFIG_SENSORS_MAX197 is not set -# CONFIG_SENSORS_MAX6639 is not set -# CONFIG_SENSORS_MAX6642 is not set -# CONFIG_SENSORS_MAX6650 is not set +CONFIG_SENSORS_MAX6639=m +CONFIG_SENSORS_MAX6642=m +CONFIG_SENSORS_MAX6650=m # CONFIG_SENSORS_MAX6697 is not set -# CONFIG_SENSORS_MCP3021 is not set +CONFIG_SENSORS_MCP3021=m # CONFIG_SENSORS_NCT6775 is not set -# CONFIG_SENSORS_NTC_THERMISTOR is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_PMBUS is not set -# CONFIG_SENSORS_SHT21 is not set -# CONFIG_SENSORS_SIS5595 is not set +CONFIG_SENSORS_NTC_THERMISTOR=m +CONFIG_SENSORS_PC87360=m +CONFIG_SENSORS_PC87427=m +CONFIG_SENSORS_PCF8591=m +CONFIG_PMBUS=m +CONFIG_SENSORS_PMBUS=m +CONFIG_SENSORS_ADM1275=m +CONFIG_SENSORS_LM25066=m +CONFIG_SENSORS_LTC2978=m +CONFIG_SENSORS_MAX16064=m +CONFIG_SENSORS_MAX34440=m +CONFIG_SENSORS_MAX8688=m +CONFIG_SENSORS_UCD9000=m +CONFIG_SENSORS_UCD9200=m +CONFIG_SENSORS_ZL6100=m +CONFIG_SENSORS_SHT21=m +CONFIG_SENSORS_SIS5595=m # CONFIG_SENSORS_SMM665 is not set -# CONFIG_SENSORS_DME1737 is not set -# CONFIG_SENSORS_EMC1403 is not set +CONFIG_SENSORS_DME1737=m +CONFIG_SENSORS_EMC1403=m # CONFIG_SENSORS_EMC2103 is not set -# CONFIG_SENSORS_EMC6W201 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SCH56XX_COMMON is not set -# CONFIG_SENSORS_ADS1015 is not set -# CONFIG_SENSORS_ADS7828 is not set -# CONFIG_SENSORS_AMC6821 is not set +CONFIG_SENSORS_EMC6W201=m +CONFIG_SENSORS_SMSC47M1=m +CONFIG_SENSORS_SMSC47M192=m +CONFIG_SENSORS_SMSC47B397=m +CONFIG_SENSORS_SCH56XX_COMMON=m +CONFIG_SENSORS_SCH5627=m +CONFIG_SENSORS_SCH5636=m +CONFIG_SENSORS_ADS1015=m +CONFIG_SENSORS_ADS7828=m +CONFIG_SENSORS_AMC6821=m # CONFIG_SENSORS_INA209 is not set # CONFIG_SENSORS_INA2XX is not set -# CONFIG_SENSORS_THMC50 is not set -# CONFIG_SENSORS_TMP102 is not set -# CONFIG_SENSORS_TMP401 is not set -# CONFIG_SENSORS_TMP421 is not set -# CONFIG_SENSORS_VIA_CPUTEMP is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83795 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83L786NG is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_SENSORS_APPLESMC is not set +CONFIG_SENSORS_THMC50=m +CONFIG_SENSORS_TMP102=m +CONFIG_SENSORS_TMP401=m +CONFIG_SENSORS_TMP421=m +CONFIG_SENSORS_VIA_CPUTEMP=m +CONFIG_SENSORS_VIA686A=m +CONFIG_SENSORS_VT1211=m +CONFIG_SENSORS_VT8231=m +CONFIG_SENSORS_W83781D=m +CONFIG_SENSORS_W83791D=m +CONFIG_SENSORS_W83792D=m +CONFIG_SENSORS_W83793=m +CONFIG_SENSORS_W83795=m +# CONFIG_SENSORS_W83795_FANCTRL is not set +CONFIG_SENSORS_W83L785TS=m +CONFIG_SENSORS_W83L786NG=m +CONFIG_SENSORS_W83627HF=m +CONFIG_SENSORS_W83627EHF=m +CONFIG_SENSORS_APPLESMC=m # # ACPI drivers # -# CONFIG_SENSORS_ACPI_POWER is not set -# CONFIG_SENSORS_ATK0110 is not set +CONFIG_SENSORS_ACPI_POWER=m +CONFIG_SENSORS_ATK0110=m CONFIG_THERMAL=y CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y @@ -1624,89 +2563,129 @@ # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set # CONFIG_THERMAL_GOV_FAIR_SHARE is not set CONFIG_THERMAL_GOV_STEP_WISE=y -# CONFIG_THERMAL_GOV_USER_SPACE is not set +CONFIG_THERMAL_GOV_USER_SPACE=y # CONFIG_CPU_THERMAL is not set # CONFIG_THERMAL_EMULATION is not set -CONFIG_INTEL_POWERCLAMP=y +# CONFIG_INTEL_POWERCLAMP is not set +CONFIG_X86_PKG_TEMP_THERMAL=m # # Texas Instruments thermal drivers # -# CONFIG_WATCHDOG is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=m +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +CONFIG_ALIM1535_WDT=m +CONFIG_ALIM7101_WDT=m +CONFIG_F71808E_WDT=m +CONFIG_SP5100_TCO=m +# CONFIG_SC520_WDT is not set +CONFIG_SBC_FITPC2_WATCHDOG=m +# CONFIG_EUROTECH_WDT is not set +CONFIG_IB700_WDT=m +CONFIG_IBMASR=m +# CONFIG_WAFER_WDT is not set +CONFIG_I6300ESB_WDT=m +# CONFIG_IE6XX_WDT is not set +CONFIG_ITCO_WDT=m +CONFIG_ITCO_VENDOR_SUPPORT=y +CONFIG_IT8712F_WDT=m +CONFIG_IT87_WDT=m +CONFIG_HP_WATCHDOG=m +CONFIG_HPWDT_NMI_DECODING=y +# CONFIG_SC1200_WDT is not set +# CONFIG_PC87413_WDT is not set +CONFIG_NV_TCO=m +# CONFIG_60XX_WDT is not set +# CONFIG_SBC8360_WDT is not set +# CONFIG_CPU5_WDT is not set +CONFIG_SMSC_SCH311X_WDT=m +# CONFIG_SMSC37B787_WDT is not set +CONFIG_VIA_WDT=m +CONFIG_W83627HF_WDT=m +CONFIG_W83697HF_WDT=m +CONFIG_W83697UG_WDT=m +CONFIG_W83877F_WDT=m +CONFIG_W83977F_WDT=m +CONFIG_MACHZ_WDT=m +# CONFIG_SBC_EPX_C3_WATCHDOG is not set + +# +# PCI-based Watchdog Cards +# +CONFIG_PCIPCWATCHDOG=m +CONFIG_WDTPCI=m + +# +# USB-based Watchdog Cards +# +CONFIG_USBPCWATCHDOG=m CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -# CONFIG_SSB is not set +CONFIG_SSB=m +CONFIG_SSB_SPROM=y +CONFIG_SSB_PCIHOST_POSSIBLE=y +CONFIG_SSB_PCIHOST=y +# CONFIG_SSB_B43_PCI_BRIDGE is not set +CONFIG_SSB_PCMCIAHOST_POSSIBLE=y +CONFIG_SSB_PCMCIAHOST=y +CONFIG_SSB_SDIOHOST_POSSIBLE=y +CONFIG_SSB_SDIOHOST=y +# CONFIG_SSB_DEBUG is not set +CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +CONFIG_SSB_DRIVER_PCICORE=y CONFIG_BCMA_POSSIBLE=y # # Broadcom specific AMBA # -# CONFIG_BCMA is not set +CONFIG_BCMA=m +CONFIG_BCMA_HOST_PCI_POSSIBLE=y +CONFIG_BCMA_HOST_PCI=y +# CONFIG_BCMA_HOST_SOC is not set +# CONFIG_BCMA_DRIVER_GMAC_CMN is not set +# CONFIG_BCMA_DEBUG is not set # # Multifunction device drivers # CONFIG_MFD_CORE=m # CONFIG_MFD_CS5535 is not set -# CONFIG_MFD_AS3711 is not set -# CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_CROS_EC is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_DA9052_I2C is not set -# CONFIG_MFD_DA9055 is not set -# CONFIG_MFD_DA9063 is not set # CONFIG_MFD_MC13XXX_I2C is not set # CONFIG_HTC_PASIC3 is not set CONFIG_LPC_ICH=m CONFIG_LPC_SCH=m # CONFIG_MFD_JANZ_CMODIO is not set # CONFIG_MFD_KEMPLD is not set -# CONFIG_MFD_88PM800 is not set -# CONFIG_MFD_88PM805 is not set -# CONFIG_MFD_88PM860X is not set -# CONFIG_MFD_MAX77686 is not set -# CONFIG_MFD_MAX77693 is not set -# CONFIG_MFD_MAX8907 is not set -# CONFIG_MFD_MAX8925 is not set -# CONFIG_MFD_MAX8997 is not set -# CONFIG_MFD_MAX8998 is not set # CONFIG_MFD_VIPERBOARD is not set # CONFIG_MFD_RETU is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_RDC321X is not set # CONFIG_MFD_RTSX_PCI is not set -# CONFIG_MFD_RC5T583 is not set -# CONFIG_MFD_SEC_CORE is not set # CONFIG_MFD_SI476X_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_SMSC is not set +CONFIG_MFD_SM501=m # CONFIG_ABX500_CORE is not set -# CONFIG_MFD_STMPE is not set # CONFIG_MFD_SYSCON is not set # CONFIG_MFD_TI_AM335X_TSCADC is not set -# CONFIG_MFD_LP8788 is not set -# CONFIG_MFD_PALMAS is not set # CONFIG_TPS6105X is not set # CONFIG_TPS6507X is not set -# CONFIG_MFD_TPS65090 is not set # CONFIG_MFD_TPS65217 is not set -# CONFIG_MFD_TPS6586X is not set -# CONFIG_MFD_TPS80031 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_TWL6040_CORE is not set -# CONFIG_MFD_WL1273_CORE is not set +CONFIG_MFD_WL1273_CORE=m # CONFIG_MFD_LM3533 is not set -# CONFIG_MFD_TC3589X is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_VX855 is not set +CONFIG_MFD_VX855=m # CONFIG_MFD_ARIZONA_I2C is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM831X_I2C is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_WM8994 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1714,25 +2693,148 @@ # Graphics support # CONFIG_AGP=y -# CONFIG_AGP_INTEL is not set -# CONFIG_AGP_SIS is not set -# CONFIG_AGP_VIA is not set +CONFIG_AGP_AMD64=y +CONFIG_AGP_INTEL=y +CONFIG_AGP_SIS=y +CONFIG_AGP_VIA=y CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 -# CONFIG_VGA_SWITCHEROO is not set -# CONFIG_DRM is not set +CONFIG_VGA_SWITCHEROO=y +CONFIG_DRM=m +CONFIG_DRM_KMS_HELPER=m +# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set +CONFIG_DRM_TTM=m + +# +# I2C encoder or helper chips +# +CONFIG_DRM_I2C_CH7006=m +CONFIG_DRM_I2C_SIL164=m +# CONFIG_DRM_I2C_NXP_TDA998X is not set +CONFIG_DRM_TDFX=m +CONFIG_DRM_R128=m +CONFIG_DRM_RADEON=m +# CONFIG_DRM_RADEON_UMS is not set +CONFIG_DRM_NOUVEAU=m +CONFIG_NOUVEAU_DEBUG=5 +CONFIG_NOUVEAU_DEBUG_DEFAULT=3 +CONFIG_DRM_NOUVEAU_BACKLIGHT=y +CONFIG_DRM_I810=m +CONFIG_DRM_I915=m +CONFIG_DRM_I915_KMS=y +# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set +CONFIG_DRM_MGA=m +CONFIG_DRM_SIS=m +CONFIG_DRM_VIA=m +CONFIG_DRM_SAVAGE=m +CONFIG_DRM_VMWGFX=m +# CONFIG_DRM_VMWGFX_FBCON is not set +CONFIG_DRM_GMA500=m +# CONFIG_DRM_GMA600 is not set +# CONFIG_DRM_GMA3600 is not set +# CONFIG_DRM_UDL is not set +# CONFIG_DRM_AST is not set +# CONFIG_DRM_MGAG200 is not set +# CONFIG_DRM_CIRRUS_QEMU is not set +# CONFIG_DRM_QXL is not set # CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_HDMI=y +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_BOOT_VESA_SUPPORT=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=m +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +CONFIG_FB_BACKLIGHT=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_UVESA is not set +CONFIG_FB_VESA=y +CONFIG_FB_EFI=y +# CONFIG_FB_N411 is not set +# CONFIG_FB_HGA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I740 is not set +# CONFIG_FB_LE80578 is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_TMIO is not set +# CONFIG_FB_SM501 is not set +# CONFIG_FB_SMSCUFX is not set +CONFIG_FB_UDL=m +# CONFIG_FB_GOLDFISH is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_AUO_K190X is not set +# CONFIG_FB_SIMPLE is not set # CONFIG_EXYNOS_VIDEO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_LCD_PLATFORM=m +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_APPLE=m +# CONFIG_BACKLIGHT_SAHARA is not set +# CONFIG_BACKLIGHT_ADP8860 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set +# CONFIG_BACKLIGHT_LM3630 is not set +# CONFIG_BACKLIGHT_LM3639 is not set +CONFIG_BACKLIGHT_LP855X=m +# CONFIG_BACKLIGHT_LV5207LP is not set +# CONFIG_BACKLIGHT_BD6107 is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set +CONFIG_VGACON_SOFT_SCROLLBACK=y +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_LOGO is not set # CONFIG_SOUND is not set # @@ -1740,71 +2842,92 @@ # CONFIG_HID=y # CONFIG_HID_BATTERY_STRENGTH is not set -# CONFIG_HIDRAW is not set +CONFIG_HIDRAW=y # CONFIG_UHID is not set CONFIG_HID_GENERIC=y # # Special HID drivers # -# CONFIG_HID_A4TECH is not set -# CONFIG_HID_ACRUX is not set -# CONFIG_HID_APPLE is not set +CONFIG_HID_A4TECH=y +CONFIG_HID_ACRUX=m +CONFIG_HID_ACRUX_FF=y +CONFIG_HID_APPLE=y # CONFIG_HID_APPLEIR is not set # CONFIG_HID_AUREAL is not set -# CONFIG_HID_BELKIN is not set -# CONFIG_HID_CHERRY is not set -# CONFIG_HID_CHICONY is not set -# CONFIG_HID_CYPRESS is not set -# CONFIG_HID_DRAGONRISE is not set -# CONFIG_HID_EMS_FF is not set -# CONFIG_HID_ELECOM is not set +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=m +CONFIG_DRAGONRISE_FF=y +CONFIG_HID_EMS_FF=m +CONFIG_HID_ELECOM=m # CONFIG_HID_ELO is not set -# CONFIG_HID_EZKEY is not set -# CONFIG_HID_HOLTEK is not set +CONFIG_HID_EZKEY=y +CONFIG_HID_HOLTEK=m +CONFIG_HOLTEK_FF=y # CONFIG_HID_HUION is not set -# CONFIG_HID_KEYTOUCH is not set -# CONFIG_HID_KYE is not set -# CONFIG_HID_UCLOGIC is not set -# CONFIG_HID_WALTOP is not set -# CONFIG_HID_GYRATION is not set +CONFIG_HID_KEYTOUCH=m +CONFIG_HID_KYE=m +CONFIG_HID_UCLOGIC=m +CONFIG_HID_WALTOP=m +CONFIG_HID_GYRATION=m # CONFIG_HID_ICADE is not set -# CONFIG_HID_TWINHAN is not set -# CONFIG_HID_KENSINGTON is not set -# CONFIG_HID_LCPOWER is not set +CONFIG_HID_TWINHAN=m +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LCPOWER=m # CONFIG_HID_LENOVO_TPKBD is not set -# CONFIG_HID_LOGITECH is not set -# CONFIG_HID_MAGICMOUSE is not set -# CONFIG_HID_MICROSOFT is not set -# CONFIG_HID_MONTEREY is not set -# CONFIG_HID_MULTITOUCH is not set -# CONFIG_HID_NTRIG is not set -# CONFIG_HID_ORTEK is not set -# CONFIG_HID_PANTHERLORD is not set -# CONFIG_HID_PETALYNX is not set -# CONFIG_HID_PICOLCD is not set -# CONFIG_HID_PRIMAX is not set -# CONFIG_HID_ROCCAT is not set -# CONFIG_HID_SAITEK is not set -# CONFIG_HID_SAMSUNG is not set -# CONFIG_HID_SPEEDLINK is not set +CONFIG_HID_LOGITECH=y +CONFIG_HID_LOGITECH_DJ=m +CONFIG_LOGITECH_FF=y +CONFIG_LOGIRUMBLEPAD2_FF=y +CONFIG_LOGIG940_FF=y +CONFIG_LOGIWHEELS_FF=y +CONFIG_HID_MAGICMOUSE=m +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_MULTITOUCH=m +CONFIG_HID_NTRIG=y +CONFIG_HID_ORTEK=m +CONFIG_HID_PANTHERLORD=m +CONFIG_PANTHERLORD_FF=y +CONFIG_HID_PETALYNX=m +CONFIG_HID_PICOLCD=m +CONFIG_HID_PICOLCD_FB=y +CONFIG_HID_PICOLCD_BACKLIGHT=y +CONFIG_HID_PICOLCD_LCD=y +CONFIG_HID_PICOLCD_LEDS=y +CONFIG_HID_PRIMAX=m +CONFIG_HID_ROCCAT=m +CONFIG_HID_SAITEK=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SPEEDLINK=m # CONFIG_HID_STEELSERIES is not set -# CONFIG_HID_SUNPLUS is not set -# CONFIG_HID_GREENASIA is not set -# CONFIG_HID_SMARTJOYPLUS is not set -# CONFIG_HID_TIVO is not set -# CONFIG_HID_TOPSEED is not set -# CONFIG_HID_THRUSTMASTER is not set +CONFIG_HID_SUNPLUS=m +CONFIG_HID_GREENASIA=m +CONFIG_GREENASIA_FF=y +CONFIG_HID_SMARTJOYPLUS=m +CONFIG_SMARTJOYPLUS_FF=y +CONFIG_HID_TIVO=m +CONFIG_HID_TOPSEED=m +# CONFIG_HID_THINGM is not set +CONFIG_HID_THRUSTMASTER=m +CONFIG_THRUSTMASTER_FF=y +CONFIG_HID_WACOM=m +CONFIG_HID_WIIMOTE=m # CONFIG_HID_XINMO is not set -# CONFIG_HID_ZEROPLUS is not set -# CONFIG_HID_ZYDACRON is not set +CONFIG_HID_ZEROPLUS=m +CONFIG_ZEROPLUS_FF=y +CONFIG_HID_ZYDACRON=m # CONFIG_HID_SENSOR_HUB is not set # # USB HID support # CONFIG_USB_HID=y -# CONFIG_HID_PID is not set +CONFIG_HID_PID=y CONFIG_USB_HIDDEV=y # @@ -1817,16 +2940,15 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # CONFIG_USB_DEFAULT_PERSIST=y # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -# CONFIG_USB_MON is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_MON=y # CONFIG_USB_WUSB_CBAF is not set # @@ -1835,31 +2957,36 @@ # CONFIG_USB_C67X00_HCD is not set CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_EHCI_PCI=y # CONFIG_USB_EHCI_HCD_PLATFORM is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set -# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_ISP1362_HCD=m # CONFIG_USB_FUSBH200_HCD is not set # CONFIG_USB_FOTG210_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PCI=y # CONFIG_USB_OHCI_HCD_PLATFORM is not set CONFIG_USB_UHCI_HCD=y -# CONFIG_USB_SL811_HCD is not set +CONFIG_USB_U132_HCD=m +CONFIG_USB_SL811_HCD=m +CONFIG_USB_SL811_HCD_ISO=y +# CONFIG_USB_SL811_CS is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HCD_BCMA is not set +# CONFIG_USB_HCD_SSB is not set # CONFIG_USB_HCD_TEST_MODE is not set # # USB Device Class drivers # -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +CONFIG_USB_TMC=m # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may @@ -1870,109 +2997,121 @@ # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_REALTEK is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_STORAGE_ENE_UB6250 is not set +CONFIG_USB_STORAGE_REALTEK=m +CONFIG_REALTEK_AUTOPM=y +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +CONFIG_USB_STORAGE_ONETOUCH=m +CONFIG_USB_STORAGE_KARMA=m +CONFIG_USB_STORAGE_CYPRESS_ATACB=m +CONFIG_USB_STORAGE_ENE_UB6250=m # # USB Imaging devices # -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m # CONFIG_USB_DWC3 is not set # CONFIG_USB_CHIPIDEA is not set # # USB port drivers # -CONFIG_USB_SERIAL=m -# CONFIG_USB_SERIAL_GENERIC is not set +CONFIG_USB_USS720=m +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_SIMPLE is not set -# CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_ARK3116 is not set -# CONFIG_USB_SERIAL_BELKIN is not set -# CONFIG_USB_SERIAL_CH341 is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP210X is not set -# CONFIG_USB_SERIAL_CYPRESS_M8 is not set -# CONFIG_USB_SERIAL_EMPEG is not set -# CONFIG_USB_SERIAL_FTDI_SIO is not set -# CONFIG_USB_SERIAL_VISOR is not set -# CONFIG_USB_SERIAL_IPAQ is not set -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CP210X=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m # CONFIG_USB_SERIAL_F81232 is not set -# CONFIG_USB_SERIAL_GARMIN is not set -# CONFIG_USB_SERIAL_IPW is not set -# CONFIG_USB_SERIAL_IUU is not set -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -# CONFIG_USB_SERIAL_KEYSPAN is not set -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_KOBIL_SCT is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m # CONFIG_USB_SERIAL_METRO is not set -# CONFIG_USB_SERIAL_MOS7720 is not set -# CONFIG_USB_SERIAL_MOS7840 is not set -# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7715_PARPORT=y +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_NAVMAN=m CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_OTI6858 is not set -# CONFIG_USB_SERIAL_QCAUX is not set -# CONFIG_USB_SERIAL_QUALCOMM is not set -# CONFIG_USB_SERIAL_SPCP8X5 is not set -# CONFIG_USB_SERIAL_SAFE is not set -# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set -# CONFIG_USB_SERIAL_SYMBOL is not set -# CONFIG_USB_SERIAL_TI is not set -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_SERIAL_OPTION is not set -# CONFIG_USB_SERIAL_OMNINET is not set -# CONFIG_USB_SERIAL_OPTICON is not set +CONFIG_USB_SERIAL_OTI6858=m +CONFIG_USB_SERIAL_QCAUX=m +CONFIG_USB_SERIAL_QUALCOMM=m +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_SAFE=m +CONFIG_USB_SERIAL_SAFE_PADDED=y +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +CONFIG_USB_SERIAL_SYMBOL=m +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_WWAN=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTICON=m # CONFIG_USB_SERIAL_XSENS_MT is not set # CONFIG_USB_SERIAL_WISHBONE is not set # CONFIG_USB_SERIAL_ZTE is not set -# CONFIG_USB_SERIAL_SSU100 is not set +CONFIG_USB_SERIAL_SSU100=m # CONFIG_USB_SERIAL_QT2 is not set -# CONFIG_USB_SERIAL_DEBUG is not set +CONFIG_USB_SERIAL_DEBUG=m # # USB Miscellaneous drivers # -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_ADUTUX=m +CONFIG_USB_SEVSEG=m # CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_LED=m # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_IDMOUSE=m +CONFIG_USB_FTDI_ELAN=m +CONFIG_USB_APPLEDISPLAY=m +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +CONFIG_USB_LD=m +CONFIG_USB_TRANCEVIBRATOR=m +CONFIG_USB_IOWARRIOR=m # CONFIG_USB_TEST is not set # CONFIG_USB_EHSET_TEST_FIXTURE is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_YUREX is not set -# CONFIG_USB_EZUSB_FX2 is not set +CONFIG_USB_ISIGHTFW=m +CONFIG_USB_YUREX=m +CONFIG_USB_EZUSB_FX2=m # CONFIG_USB_HSIC_USB3503 is not set +CONFIG_USB_ATM=m +CONFIG_USB_SPEEDTOUCH=m +CONFIG_USB_CXACRU=m +CONFIG_USB_UEAGLEATM=m +CONFIG_USB_XUSBATM=m # # USB Physical Layer drivers @@ -1986,12 +3125,140 @@ # CONFIG_USB_RCAR_PHY is not set # CONFIG_USB_GADGET is not set # CONFIG_UWB is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set +# CONFIG_MMC_CLKGATE is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK_MINORS=8 +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=m +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=m +CONFIG_MMC_SDHCI_PCI=m +CONFIG_MMC_RICOH_MMC=y +# CONFIG_MMC_SDHCI_ACPI is not set +CONFIG_MMC_SDHCI_PLTFM=m +CONFIG_MMC_WBSD=m +CONFIG_MMC_TIFM_SD=m +CONFIG_MMC_SDRICOH_CS=m +CONFIG_MMC_CB710=m +CONFIG_MMC_VIA_SDMMC=m +CONFIG_MMC_VUB300=m +CONFIG_MMC_USHC=m +CONFIG_MEMSTICK=m +# CONFIG_MEMSTICK_DEBUG is not set + +# +# MemoryStick drivers +# +# CONFIG_MEMSTICK_UNSAFE_RESUME is not set +CONFIG_MSPRO_BLOCK=m +# CONFIG_MS_BLOCK is not set + +# +# MemoryStick Host Controller Drivers +# +CONFIG_MEMSTICK_TIFM_MS=m +CONFIG_MEMSTICK_JMICRON_38X=m +CONFIG_MEMSTICK_R592=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_LM3530=m +# CONFIG_LEDS_LM3642 is not set +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_LP3944=m +CONFIG_LEDS_LP55XX_COMMON=m +CONFIG_LEDS_LP5521=m +CONFIG_LEDS_LP5523=m +# CONFIG_LEDS_LP5562 is not set +# CONFIG_LEDS_LP8501 is not set +CONFIG_LEDS_CLEVO_MAIL=m +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_PCA963X is not set +# CONFIG_LEDS_BD2802 is not set +CONFIG_LEDS_INTEL_SS4200=m +CONFIG_LEDS_DELL_NETBOOKS=m +# CONFIG_LEDS_TCA6507 is not set +# CONFIG_LEDS_LM355x is not set +# CONFIG_LEDS_OT200 is not set +# CONFIG_LEDS_BLINKM is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +# CONFIG_LEDS_TRIGGER_ONESHOT is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +# CONFIG_LEDS_TRIGGER_CPU is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_LEDS_TRIGGER_TRANSIENT is not set +# CONFIG_LEDS_TRIGGER_CAMERA is not set +CONFIG_ACCESSIBILITY=y +CONFIG_A11Y_BRAILLE_CONSOLE=y +CONFIG_INFINIBAND=m +CONFIG_INFINIBAND_USER_MAD=m +CONFIG_INFINIBAND_USER_ACCESS=m +# CONFIG_INFINIBAND_EXPERIMENTAL_UVERBS_FLOW_STEERING is not set +CONFIG_INFINIBAND_USER_MEM=y +CONFIG_INFINIBAND_ADDR_TRANS=y +CONFIG_INFINIBAND_MTHCA=m +CONFIG_INFINIBAND_MTHCA_DEBUG=y +CONFIG_INFINIBAND_IPATH=m +CONFIG_INFINIBAND_QIB=m +CONFIG_INFINIBAND_QIB_DCA=y +CONFIG_INFINIBAND_AMSO1100=m +# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set +CONFIG_MLX4_INFINIBAND=m +# CONFIG_MLX5_INFINIBAND is not set +CONFIG_INFINIBAND_NES=m +# CONFIG_INFINIBAND_NES_DEBUG is not set +# CONFIG_INFINIBAND_OCRDMA is not set +CONFIG_INFINIBAND_IPOIB=m +CONFIG_INFINIBAND_IPOIB_CM=y +CONFIG_INFINIBAND_IPOIB_DEBUG=y +CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y +CONFIG_INFINIBAND_SRP=m +CONFIG_INFINIBAND_SRPT=m +CONFIG_INFINIBAND_ISER=m +# CONFIG_INFINIBAND_ISERT is not set +CONFIG_EDAC=y +CONFIG_EDAC_LEGACY_SYSFS=y +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_DECODE_MCE=m +CONFIG_EDAC_MCE_INJ=m +CONFIG_EDAC_MM_EDAC=m +CONFIG_EDAC_AMD64=m +# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set +CONFIG_EDAC_E752X=m +CONFIG_EDAC_I82975X=m +CONFIG_EDAC_I3000=m +CONFIG_EDAC_I3200=m +CONFIG_EDAC_X38=m +CONFIG_EDAC_I5400=m +CONFIG_EDAC_I7CORE=m +CONFIG_EDAC_I5000=m +CONFIG_EDAC_I5100=m +CONFIG_EDAC_I7300=m +CONFIG_EDAC_SBRIDGE=m CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -2011,27 +3278,28 @@ # # I2C RTC drivers # -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_DS3232 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_ISL12022 is not set -# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_DS1307=m +CONFIG_RTC_DRV_DS1374=m +CONFIG_RTC_DRV_DS1672=m +CONFIG_RTC_DRV_DS3232=m +CONFIG_RTC_DRV_MAX6900=m +CONFIG_RTC_DRV_RS5C372=m +CONFIG_RTC_DRV_ISL1208=m +CONFIG_RTC_DRV_ISL12022=m +CONFIG_RTC_DRV_X1205=m # CONFIG_RTC_DRV_PCF2127 is not set # CONFIG_RTC_DRV_PCF8523 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_BQ32K is not set +CONFIG_RTC_DRV_PCF8563=m +CONFIG_RTC_DRV_PCF8583=m +CONFIG_RTC_DRV_M41T80=m +CONFIG_RTC_DRV_M41T80_WDT=y +CONFIG_RTC_DRV_BQ32K=m # CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set -# CONFIG_RTC_DRV_RX8025 is not set -# CONFIG_RTC_DRV_EM3027 is not set -# CONFIG_RTC_DRV_RV3029C2 is not set +CONFIG_RTC_DRV_FM3130=m +CONFIG_RTC_DRV_RX8581=m +CONFIG_RTC_DRV_RX8025=m +CONFIG_RTC_DRV_EM3027=m +CONFIG_RTC_DRV_RV3029C2=m # # SPI RTC drivers @@ -2041,18 +3309,18 @@ # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set +CONFIG_RTC_DRV_DS1286=m +CONFIG_RTC_DRV_DS1511=m +CONFIG_RTC_DRV_DS1553=m +CONFIG_RTC_DRV_DS1742=m +CONFIG_RTC_DRV_STK17TA8=m # CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_MSM6242 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_RP5C01 is not set -# CONFIG_RTC_DRV_V3020 is not set +CONFIG_RTC_DRV_M48T35=m +CONFIG_RTC_DRV_M48T59=m +CONFIG_RTC_DRV_MSM6242=m +CONFIG_RTC_DRV_BQ4802=m +CONFIG_RTC_DRV_RP5C01=m +CONFIG_RTC_DRV_V3020=m # CONFIG_RTC_DRV_DS2404 is not set # @@ -2064,43 +3332,165 @@ # HID Sensor RTC drivers # # CONFIG_RTC_DRV_HID_SENSOR_TIME is not set -# CONFIG_DMADEVICES is not set -# CONFIG_AUXDISPLAY is not set -# CONFIG_UIO is not set -CONFIG_VIRT_DRIVERS=y +CONFIG_DMADEVICES=y +# CONFIG_DMADEVICES_DEBUG is not set + +# +# DMA Devices +# +# CONFIG_INTEL_MID_DMAC is not set +CONFIG_INTEL_IOATDMA=m +# CONFIG_DW_DMAC_CORE is not set +# CONFIG_DW_DMAC is not set +# CONFIG_DW_DMAC_PCI is not set +# CONFIG_TIMB_DMA is not set +CONFIG_PCH_DMA=m +CONFIG_DMA_ENGINE=y +CONFIG_DMA_ACPI=y + +# +# DMA Clients +# +CONFIG_ASYNC_TX_DMA=y +# CONFIG_DMATEST is not set +CONFIG_DCA=m +CONFIG_AUXDISPLAY=y +CONFIG_KS0108=m +CONFIG_KS0108_PORT=0x378 +CONFIG_KS0108_DELAY=2 +CONFIG_CFAG12864B=m +CONFIG_CFAG12864B_RATE=20 +CONFIG_UIO=m +CONFIG_UIO_CIF=m +# CONFIG_UIO_PDRV_GENIRQ is not set +# CONFIG_UIO_DMEM_GENIRQ is not set +CONFIG_UIO_AEC=m +CONFIG_UIO_SERCOS3=m +CONFIG_UIO_PCI_GENERIC=m +# CONFIG_UIO_NETX is not set +# CONFIG_UIO_MF624 is not set +# CONFIG_VFIO is not set +# CONFIG_VIRT_DRIVERS is not set CONFIG_VIRTIO=y # # Virtio drivers # CONFIG_VIRTIO_PCI=y -CONFIG_VIRTIO_BALLOON=y -CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_BALLOON=m +CONFIG_VIRTIO_MMIO=m # CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set # # Microsoft Hyper-V guest support # -# CONFIG_STAGING is not set +CONFIG_STAGING=y +# CONFIG_ET131X is not set +# CONFIG_SLICOSS is not set +# CONFIG_USBIP_CORE is not set +# CONFIG_ECHO is not set +# CONFIG_COMEDI is not set +# CONFIG_PANEL is not set +# CONFIG_RTS5139 is not set +# CONFIG_TRANZPORT is not set +# CONFIG_USB_SERIAL_QUATECH2 is not set +# CONFIG_DX_SEP is not set +# CONFIG_ZSMALLOC is not set +# CONFIG_FB_SM7XX is not set +CONFIG_CRYSTALHD=m +# CONFIG_FB_XGI is not set +# CONFIG_ACPI_QUICKSTART is not set +# CONFIG_USB_ENESTORAGE is not set +# CONFIG_BCM_WIMAX is not set +# CONFIG_FT1000 is not set + +# +# Speakup console speech +# +CONFIG_SPEAKUP=m +CONFIG_SPEAKUP_SYNTH_ACNTSA=m +CONFIG_SPEAKUP_SYNTH_ACNTPC=m +CONFIG_SPEAKUP_SYNTH_APOLLO=m +CONFIG_SPEAKUP_SYNTH_AUDPTR=m +CONFIG_SPEAKUP_SYNTH_BNS=m +CONFIG_SPEAKUP_SYNTH_DECTLK=m +CONFIG_SPEAKUP_SYNTH_DECEXT=m +CONFIG_SPEAKUP_SYNTH_DECPC=m +CONFIG_SPEAKUP_SYNTH_DTLK=m +CONFIG_SPEAKUP_SYNTH_KEYPC=m +CONFIG_SPEAKUP_SYNTH_LTLK=m +CONFIG_SPEAKUP_SYNTH_SOFT=m +CONFIG_SPEAKUP_SYNTH_SPKOUT=m +CONFIG_SPEAKUP_SYNTH_TXPRT=m +CONFIG_SPEAKUP_SYNTH_DUMMY=m +# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set +CONFIG_STAGING_MEDIA=y + +# +# Android +# +# CONFIG_ANDROID is not set +# CONFIG_USB_WPAN_HCD is not set +# CONFIG_WIMAX_GDM72XX is not set +# CONFIG_LTE_GDM724X is not set +CONFIG_NET_VENDOR_SILICOM=y +# CONFIG_SBYPASS is not set +# CONFIG_BPCTL is not set +# CONFIG_CED1401 is not set +# CONFIG_DGRP is not set +# CONFIG_USB_DWC2 is not set +# CONFIG_LUSTRE_FS is not set +# CONFIG_USB_BTMTK is not set +# CONFIG_XILLYBUS is not set +# CONFIG_DGNC is not set +# CONFIG_DGAP is not set CONFIG_X86_PLATFORM_DEVICES=y -# CONFIG_ACERHDF is not set -# CONFIG_ASUS_LAPTOP is not set +CONFIG_ACER_WMI=m +CONFIG_ACERHDF=m +CONFIG_ASUS_LAPTOP=m # CONFIG_CHROMEOS_LAPTOP is not set -# CONFIG_FUJITSU_TABLET is not set -# CONFIG_HP_ACCEL is not set -# CONFIG_THINKPAD_ACPI is not set -# CONFIG_SENSORS_HDAPS is not set +CONFIG_DELL_LAPTOP=m +CONFIG_DELL_WMI=m +CONFIG_DELL_WMI_AIO=m +CONFIG_FUJITSU_LAPTOP=m +# CONFIG_FUJITSU_LAPTOP_DEBUG is not set +CONFIG_FUJITSU_TABLET=m +CONFIG_AMILO_RFKILL=m +CONFIG_HP_ACCEL=m +CONFIG_HP_WMI=m +CONFIG_MSI_LAPTOP=m +CONFIG_PANASONIC_LAPTOP=m +CONFIG_COMPAL_LAPTOP=m +CONFIG_SONY_LAPTOP=m +CONFIG_SONYPI_COMPAT=y +CONFIG_IDEAPAD_LAPTOP=m +CONFIG_THINKPAD_ACPI=m +# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set +# CONFIG_THINKPAD_ACPI_DEBUG is not set +# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set +CONFIG_THINKPAD_ACPI_VIDEO=y +CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y +CONFIG_SENSORS_HDAPS=m # CONFIG_INTEL_MENLOW is not set -# CONFIG_EEEPC_LAPTOP is not set -# CONFIG_ACPI_WMI is not set -# CONFIG_TOPSTAR_LAPTOP is not set -# CONFIG_TOSHIBA_BT_RFKILL is not set -# CONFIG_ACPI_CMPC is not set -CONFIG_INTEL_IPS=y +CONFIG_EEEPC_LAPTOP=m +CONFIG_ASUS_WMI=m +CONFIG_ASUS_NB_WMI=m +CONFIG_EEEPC_WMI=m +CONFIG_ACPI_WMI=m +CONFIG_MSI_WMI=m +CONFIG_TOPSTAR_LAPTOP=m +CONFIG_ACPI_TOSHIBA=m +CONFIG_TOSHIBA_BT_RFKILL=m +CONFIG_ACPI_CMPC=m +CONFIG_INTEL_IPS=m # CONFIG_IBM_RTL is not set # CONFIG_XO15_EBOOK is not set -# CONFIG_SAMSUNG_Q10 is not set -CONFIG_INTEL_RST=y +CONFIG_SAMSUNG_LAPTOP=m +CONFIG_MXM_WMI=m +CONFIG_INTEL_OAKTRAIL=m +CONFIG_SAMSUNG_Q10=m +CONFIG_APPLE_GMUX=m +# CONFIG_INTEL_RST is not set # CONFIG_INTEL_SMARTCONNECT is not set # CONFIG_PVPANIC is not set @@ -2108,9 +3498,19 @@ # Hardware Spinlock drivers # CONFIG_CLKEVT_I8253=y +CONFIG_I8253_LOCK=y CONFIG_CLKBLD_I8253=y # CONFIG_MAILBOX is not set -# CONFIG_IOMMU_SUPPORT is not set +CONFIG_IOMMU_API=y +CONFIG_IOMMU_SUPPORT=y +CONFIG_AMD_IOMMU=y +CONFIG_AMD_IOMMU_STATS=y +CONFIG_AMD_IOMMU_V2=m +CONFIG_DMAR_TABLE=y +CONFIG_INTEL_IOMMU=y +# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set +CONFIG_INTEL_IOMMU_FLOPPY_WA=y +CONFIG_IRQ_REMAP=y # # Remoteproc drivers @@ -2134,37 +3534,45 @@ # # Firmware Drivers # -# CONFIG_EDD is not set -# CONFIG_FIRMWARE_MEMMAP is not set -# CONFIG_DELL_RBU is not set -# CONFIG_DCDBAS is not set +CONFIG_EDD=m +# CONFIG_EDD_OFF is not set +CONFIG_FIRMWARE_MEMMAP=y +CONFIG_DELL_RBU=m +CONFIG_DCDBAS=m CONFIG_DMIID=y -# CONFIG_DMI_SYSFS is not set -# CONFIG_ISCSI_IBFT_FIND is not set +CONFIG_DMI_SYSFS=y +CONFIG_ISCSI_IBFT_FIND=y +CONFIG_ISCSI_IBFT=m # CONFIG_GOOGLE_FIRMWARE is not set # # EFI (Extensible Firmware Interface) Support # -# CONFIG_EFI_VARS is not set +CONFIG_EFI_VARS=y +CONFIG_EFI_VARS_PSTORE=y +# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set # # File systems # CONFIG_DCACHE_WORD_ACCESS=y CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4_FS=y -# CONFIG_EXT4_FS_POSIX_ACL is not set -# CONFIG_EXT4_FS_SECURITY is not set +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y # CONFIG_EXT4_DEBUG is not set +CONFIG_FS_XIP=y CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set CONFIG_JBD2=y # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -2172,18 +3580,19 @@ # CONFIG_JFS_FS is not set CONFIG_XFS_FS=y CONFIG_XFS_QUOTA=y -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set +CONFIG_XFS_POSIX_ACL=y +CONFIG_XFS_RT=y # CONFIG_XFS_WARN is not set # CONFIG_XFS_DEBUG is not set # CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set CONFIG_BTRFS_FS=y CONFIG_BTRFS_FS_POSIX_ACL=y # CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set # CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set # CONFIG_BTRFS_DEBUG is not set # CONFIG_BTRFS_ASSERT is not set -# CONFIG_NILFS2_FS is not set +CONFIG_NILFS2_FS=m CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=y CONFIG_FILE_LOCKING=y @@ -2191,89 +3600,218 @@ CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_FANOTIFY=y -# CONFIG_QUOTA is not set -# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +# CONFIG_QUOTA_DEBUG is not set +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y CONFIG_QUOTACTL_COMPAT=y CONFIG_AUTOFS4_FS=y -# CONFIG_FUSE_FS is not set +CONFIG_FUSE_FS=y +CONFIG_CUSE=m CONFIG_GENERIC_ACL=y # # Caches # -# CONFIG_FSCACHE is not set +CONFIG_FSCACHE=m +CONFIG_FSCACHE_STATS=y +# CONFIG_FSCACHE_HISTOGRAM is not set +# CONFIG_FSCACHE_DEBUG is not set +CONFIG_FSCACHE_OBJECT_LIST=y +CONFIG_CACHEFILES=m +# CONFIG_CACHEFILES_DEBUG is not set +# CONFIG_CACHEFILES_HISTOGRAM is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -# CONFIG_UDF_FS is not set +CONFIG_ZISOFS=y +CONFIG_UDF_FS=y +CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # +CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" +CONFIG_NTFS_FS=y +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -# CONFIG_MISC_FILESYSTEMS is not set -# CONFIG_NETWORK_FILESYSTEMS is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_CONFIGFS_FS=y +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +# CONFIG_ECRYPT_FS_MESSAGING is not set +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +# CONFIG_HFSPLUS_FS_POSIX_ACL is not set +CONFIG_BEFS_FS=m +# CONFIG_BEFS_DEBUG is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_UBIFS_FS is not set +CONFIG_LOGFS=m +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_ZLIB=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=m +# CONFIG_OMFS_FS is not set +CONFIG_HPFS_FS=m +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX6FS_FS is not set +CONFIG_ROMFS_FS=m +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y +CONFIG_PSTORE=y +# CONFIG_PSTORE_CONSOLE is not set +# CONFIG_PSTORE_RAM is not set +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_UFS_DEBUG is not set +# CONFIG_EXOFS_FS is not set +# CONFIG_F2FS_FS is not set +# CONFIG_EFIVAR_FS is not set +CONFIG_ORE=m +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V2=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_SWAP is not set +CONFIG_NFS_V4_1=y +# CONFIG_NFS_V4_2 is not set +CONFIG_PNFS_FILE_LAYOUT=m +CONFIG_PNFS_BLOCK=m +CONFIG_PNFS_OBJLAYOUT=m +CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" +# CONFIG_NFS_USE_LEGACY_DNS is not set +CONFIG_NFS_USE_KERNEL_DNS=y +CONFIG_NFS_DEBUG=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +# CONFIG_NFSD_V4_SECURITY_LABEL is not set +# CONFIG_NFSD_FAULT_INJECTION is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BACKCHANNEL=y +CONFIG_SUNRPC_XPRT_RDMA=m +CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_SUNRPC_DEBUG=y +# CONFIG_CEPH_FS is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +CONFIG_CIFS_ACL=y +CONFIG_CIFS_DEBUG=y +# CONFIG_CIFS_DEBUG2 is not set +CONFIG_CIFS_DFS_UPCALL=y +# CONFIG_CIFS_SMB2 is not set +CONFIG_CIFS_FSCACHE=y +CONFIG_NCP_FS=m +CONFIG_NCPFS_PACKET_SIGNING=y +CONFIG_NCPFS_IOCTL_LOCKING=y +CONFIG_NCPFS_STRONG=y +CONFIG_NCPFS_NFS_NS=y +CONFIG_NCPFS_OS2_NS=y +CONFIG_NCPFS_SMALLDOS=y +CONFIG_NCPFS_NLS=y +CONFIG_NCPFS_EXTRAS=y +CONFIG_CODA_FS=m +CONFIG_AFS_FS=m +# CONFIG_AFS_DEBUG is not set +# CONFIG_AFS_FSCACHE is not set +CONFIG_9P_FS=m +CONFIG_9P_FSCACHE=y +CONFIG_9P_FS_POSIX_ACL=y +# CONFIG_9P_FS_SECURITY is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m # CONFIG_NLS_MAC_ROMAN is not set # CONFIG_NLS_MAC_CELTIC is not set # CONFIG_NLS_MAC_CENTEURO is not set @@ -2285,7 +3823,9 @@ # CONFIG_NLS_MAC_INUIT is not set # CONFIG_NLS_MAC_ROMANIAN is not set # CONFIG_NLS_MAC_TURKISH is not set -# CONFIG_NLS_UTF8 is not set +CONFIG_NLS_UTF8=y +CONFIG_DLM=m +# CONFIG_DLM_DEBUG is not set # # Kernel hacking @@ -2295,27 +3835,28 @@ # # printk and dmesg options # -# CONFIG_PRINTK_TIME is not set +CONFIG_PRINTK_TIME=y CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 -# CONFIG_BOOT_PRINTK_DELAY is not set +CONFIG_BOOT_PRINTK_DELAY=y +CONFIG_DYNAMIC_DEBUG=y # # Compile-time checks and compiler options # # CONFIG_DEBUG_INFO is not set # CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 CONFIG_STRIP_ASM_SYMS=y # CONFIG_READABLE_ASM is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set +CONFIG_UNUSED_SYMBOLS=y +CONFIG_DEBUG_FS=y +CONFIG_HEADERS_CHECK=y # CONFIG_DEBUG_SECTION_MISMATCH is not set CONFIG_ARCH_WANT_FRAME_POINTERS=y -# CONFIG_FRAME_POINTER is not set +CONFIG_FRAME_POINTER=y # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set -# CONFIG_MAGIC_SYSRQ is not set +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # @@ -2323,28 +3864,36 @@ # # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set CONFIG_HAVE_DEBUG_KMEMLEAK=y # CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_VM is not set +CONFIG_DEBUG_VM=y +# CONFIG_DEBUG_VM_RB is not set # CONFIG_DEBUG_VIRTUAL is not set -# CONFIG_DEBUG_MEMORY_INIT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_PER_CPU_MAPS is not set CONFIG_HAVE_DEBUG_STACKOVERFLOW=y -# CONFIG_DEBUG_STACKOVERFLOW is not set +CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_HAVE_ARCH_KMEMCHECK=y -# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DEBUG_SHIRQ=y # # Debug Lockups and Hangs # -# CONFIG_LOCKUP_DETECTOR is not set +CONFIG_LOCKUP_DETECTOR=y +CONFIG_HARDLOCKUP_DETECTOR=y +# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0 +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 # CONFIG_DETECT_HUNG_TASK is not set # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 -# CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y # # Lock Debugging (spinlocks, mutexes, etc...) @@ -2359,9 +3908,11 @@ # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_ATOMIC_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_LIST is not set +CONFIG_DEBUG_LIST=y # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_CREDENTIALS is not set @@ -2369,18 +3920,19 @@ # # RCU Debugging # -# CONFIG_SPARSE_RCU_POINTER is not set +CONFIG_SPARSE_RCU_POINTER=y # CONFIG_RCU_TORTURE_TEST is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=21 +CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_RCU_CPU_STALL_INFO is not set # CONFIG_RCU_TRACE is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_NOTIFIER_ERROR_INJECTION is not set # CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set +CONFIG_LATENCYTOP=y CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y # CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set CONFIG_USER_STACKTRACE_SUPPORT=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y @@ -2391,36 +3943,69 @@ CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_FENTRY=y CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_TRACER_MAX_TRACE=y +CONFIG_TRACE_CLOCK=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING=y +CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y -# CONFIG_FTRACE is not set +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +CONFIG_SCHED_TRACER=y +CONFIG_FTRACE_SYSCALLS=y +CONFIG_TRACER_SNAPSHOT=y +# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_KPROBE_EVENT=y +CONFIG_UPROBE_EVENT=y +CONFIG_PROBE_EVENTS=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_MMIOTRACE is not set +CONFIG_RING_BUFFER_BENCHMARK=m +# CONFIG_RING_BUFFER_STARTUP_TEST is not set # # Runtime Testing # +# CONFIG_LKDTM is not set # CONFIG_TEST_LIST_SORT is not set +# CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_RBTREE_TEST is not set # CONFIG_INTERVAL_TREE_TEST is not set -# CONFIG_ATOMIC64_SELFTEST is not set -# CONFIG_ASYNC_RAID6_TEST is not set +CONFIG_ATOMIC64_SELFTEST=y +CONFIG_ASYNC_RAID6_TEST=m # CONFIG_TEST_STRING_HELPERS is not set -# CONFIG_TEST_KSTRTOX is not set -# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set +CONFIG_TEST_KSTRTOX=y +CONFIG_PROVIDE_OHCI1394_DMA_INIT=y +CONFIG_BUILD_DOCSRC=y # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_STRICT_DEVMEM is not set +CONFIG_STRICT_DEVMEM=y # CONFIG_X86_VERBOSE_BOOTUP is not set -# CONFIG_EARLY_PRINTK is not set +CONFIG_EARLY_PRINTK=y +CONFIG_EARLY_PRINTK_DBGP=y # CONFIG_X86_PTDUMP is not set -# CONFIG_DEBUG_RODATA is not set -# CONFIG_DEBUG_SET_MODULE_RONX is not set -# CONFIG_DEBUG_NX_TEST is not set +CONFIG_DEBUG_RODATA=y +CONFIG_DEBUG_RODATA_TEST=y +CONFIG_DEBUG_SET_MODULE_RONX=y +CONFIG_DEBUG_NX_TEST=m CONFIG_DOUBLEFAULT=y # CONFIG_DEBUG_TLBFLUSH is not set +# CONFIG_IOMMU_DEBUG is not set # CONFIG_IOMMU_STRESS is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y +CONFIG_X86_DECODER_SELFTEST=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 @@ -2430,140 +4015,175 @@ # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 +CONFIG_DEBUG_BOOT_PARAMS=y # CONFIG_CPA_DEBUG is not set -# CONFIG_OPTIMIZE_INLINING is not set +CONFIG_OPTIMIZE_INLINING=y # CONFIG_DEBUG_NMI_SELFTEST is not set # CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set # # Security options # -# CONFIG_KEYS is not set +CONFIG_KEYS=y +CONFIG_TRUSTED_KEYS=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY_DMESG_RESTRICT is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -CONFIG_DEFAULT_SECURITY_DAC=y -CONFIG_DEFAULT_SECURITY="" +CONFIG_SECURITY=y +CONFIG_SECURITYFS=y +CONFIG_SECURITY_NETWORK=y +CONFIG_SECURITY_NETWORK_XFRM=y +# CONFIG_SECURITY_PATH is not set +CONFIG_INTEL_TXT=y +CONFIG_LSM_MMAP_MIN_ADDR=65536 +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set +# CONFIG_SECURITY_SMACK is not set +# CONFIG_SECURITY_TOMOYO is not set +# CONFIG_SECURITY_APPARMOR is not set +# CONFIG_SECURITY_YAMA is not set +# CONFIG_IMA is not set +CONFIG_DEFAULT_SECURITY_SELINUX=y +# CONFIG_DEFAULT_SECURITY_DAC is not set +CONFIG_DEFAULT_SECURITY="selinux" CONFIG_XOR_BLOCKS=y -CONFIG_ASYNC_CORE=y -CONFIG_ASYNC_MEMCPY=y -CONFIG_ASYNC_XOR=y -CONFIG_ASYNC_PQ=y -CONFIG_ASYNC_RAID6_RECOV=y +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_ASYNC_PQ=m +CONFIG_ASYNC_RAID6_RECOV=m CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_FIPS=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG=m -CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=m -CONFIG_CRYPTO_PCOMP2=m -# CONFIG_CRYPTO_MANAGER is not set -# CONFIG_CRYPTO_MANAGER2 is not set -# CONFIG_CRYPTO_USER is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_PCRYPT is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_PCOMP2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_USER=m +# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_PCRYPT=m +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=y +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_ABLK_HELPER_X86=y +CONFIG_CRYPTO_GLUE_HELPER_X86=y # # Authenticated Encryption with Associated Data # -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=y # # Block modes # -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_XTS is not set +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=y +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=y +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=y # # Hash modes # -# CONFIG_CRYPTO_CMAC is not set -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_VMAC is not set +CONFIG_CRYPTO_CMAC=m +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m # # Digest # CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRC32C_INTEL=y +CONFIG_CRYPTO_CRC32C_INTEL=m # CONFIG_CRYPTO_CRC32 is not set # CONFIG_CRYPTO_CRC32_PCLMUL is not set -# CONFIG_CRYPTO_CRCT10DIF is not set -# CONFIG_CRYPTO_GHASH is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA1_SSSE3 is not set +CONFIG_CRYPTO_CRCT10DIF=y +# CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set +CONFIG_CRYPTO_GHASH=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA1_SSSE3=m # CONFIG_CRYPTO_SHA256_SSSE3 is not set # CONFIG_CRYPTO_SHA512_SSSE3 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m # # Ciphers # CONFIG_CRYPTO_AES=y -# CONFIG_CRYPTO_AES_X86_64 is not set -# CONFIG_CRYPTO_AES_NI_INTEL is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set +CONFIG_CRYPTO_AES_X86_64=y +CONFIG_CRYPTO_AES_NI_INTEL=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_BLOWFISH_COMMON=m +CONFIG_CRYPTO_BLOWFISH_X86_64=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAMELLIA_X86_64=m # CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set # CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set -# CONFIG_CRYPTO_CAST5 is not set +CONFIG_CRYPTO_CAST_COMMON=m +CONFIG_CRYPTO_CAST5=m # CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set -# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_CAST6=m # CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SALSA20_X86_64 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SALSA20_X86_64=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m # CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set # CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_TWOFISH_X86_64 is not set -# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_TWOFISH_X86_64=m +CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m # CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set # # Compression # -# CONFIG_CRYPTO_DEFLATE is not set +CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_LZ4 is not set @@ -2573,10 +4193,14 @@ # Random Number Generation # CONFIG_CRYPTO_ANSI_CPRNG=m -# CONFIG_CRYPTO_USER_API_HASH is not set -# CONFIG_CRYPTO_USER_API_SKCIPHER is not set +CONFIG_CRYPTO_USER_API=y +CONFIG_CRYPTO_USER_API_HASH=y +CONFIG_CRYPTO_USER_API_SKCIPHER=y CONFIG_CRYPTO_HW=y -# CONFIG_CRYPTO_DEV_PADLOCK is not set +CONFIG_CRYPTO_DEV_PADLOCK=m +CONFIG_CRYPTO_DEV_PADLOCK_AES=m +CONFIG_CRYPTO_DEV_PADLOCK_SHA=m +# CONFIG_ASYMMETRIC_KEY_TYPE is not set CONFIG_HAVE_KVM=y CONFIG_HAVE_KVM_IRQCHIP=y CONFIG_HAVE_KVM_IRQ_ROUTING=y @@ -2590,7 +4214,9 @@ CONFIG_KVM=y CONFIG_KVM_INTEL=m # CONFIG_KVM_AMD is not set -# CONFIG_BINARY_PRINTF is not set +# CONFIG_KVM_MMU_AUDIT is not set +CONFIG_KVM_DEVICE_ASSIGNMENT=y +CONFIG_BINARY_PRINTF=y # # Library routines @@ -2604,35 +4230,50 @@ CONFIG_GENERIC_PCI_IOMAP=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_IO=y +CONFIG_PERCPU_RWSEM=y CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y CONFIG_CMPXCHG_LOCKREF=y -# CONFIG_CRC_CCITT is not set +CONFIG_CRC_CCITT=m CONFIG_CRC16=y -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y # CONFIG_CRC32_SELFTEST is not set CONFIG_CRC32_SLICEBY8=y # CONFIG_CRC32_SLICEBY4 is not set # CONFIG_CRC32_SARWATE is not set # CONFIG_CRC32_BIT is not set -# CONFIG_CRC7 is not set +CONFIG_CRC7=m CONFIG_LIBCRC32C=y -# CONFIG_CRC8 is not set +CONFIG_CRC8=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y +CONFIG_LZ4_DECOMPRESS=y CONFIG_XZ_DEC=y -# CONFIG_XZ_DEC_X86 is not set -# CONFIG_XZ_DEC_POWERPC is not set -# CONFIG_XZ_DEC_IA64 is not set -# CONFIG_XZ_DEC_ARM is not set -# CONFIG_XZ_DEC_ARMTHUMB is not set -# CONFIG_XZ_DEC_SPARC is not set -# CONFIG_XZ_DEC_BCJ is not set +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_BCJ=y # CONFIG_XZ_DEC_TEST is not set CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_XZ=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_DECOMPRESS_LZ4=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_REED_SOLOMON=m +CONFIG_REED_SOLOMON_DEC16=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_BTREE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y @@ -2641,7 +4282,13 @@ CONFIG_DQL=y CONFIG_NLATTR=y CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -# CONFIG_AVERAGE is not set -# CONFIG_CORDIC is not set +CONFIG_LRU_CACHE=m +CONFIG_AVERAGE=y +CONFIG_CORDIC=m # CONFIG_DDR is not set +CONFIG_OID_REGISTRY=y CONFIG_UCS2_STRING=y +CONFIG_FONT_SUPPORT=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-11 14:38 ` Stefan G. Weichinger @ 2014-06-11 18:57 ` Stefan G. Weichinger 2014-06-11 20:17 ` thegeezer 0 siblings, 1 reply; 30+ messages in thread From: Stefan G. Weichinger @ 2014-06-11 18:57 UTC (permalink / raw To: gentoo-user looks promising: virt-backup dumps and packs a 12 GB image-file within ~145 seconds to a non-compressing btrfs subvolume: a) does a LVM-snapshot b) dd with bs=4M and through pigz to the target file The bigger LV with ~250GB is running right now. The system feels snappier than with the old kernel ... I wonder if there is more to tune as right now I am using the rather generic config which is not tuned for the specific CPU, for example (which might even have helped? ;-) ). That was good progress today ... but I might consider re-configuring the RAIDs as mentioned. As I run backups via amanda I have to provide a so called holding disk as intermediate place for dumps on their way to the tape drive. This means copying around stuff within the same hardware raid array. One big fat hw-RAID10 might be better? But losing the wrong 2 drives makes it crash again ... afaik. time for a break here. Greets, Stefan ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-11 18:57 ` Stefan G. Weichinger @ 2014-06-11 20:17 ` thegeezer 2014-06-12 8:15 ` Stefan G. Weichinger 0 siblings, 1 reply; 30+ messages in thread From: thegeezer @ 2014-06-11 20:17 UTC (permalink / raw To: gentoo-user On 06/11/2014 07:57 PM, Stefan G. Weichinger wrote: > looks promising: > awesome. i did have a look through the diff, there are lots of scsi drivers selected, storage (block) cgroups but i think the crucial factor was the HZ was set at 100 previously and 1000 now. i guess it has helped kernel-io though maybe a kernel hacker in here might give a more authoritative answer > > One big fat hw-RAID10 might be better? > But losing the wrong 2 drives makes it crash again ... afaik. yeah you could argue with raid6 you can _only_ lose two disks, whereas if you lose the right disks with raid01 you can lose 3 and still rebuild. raid 0+1 (as opposed to raid10, slightly different) gives you great speed and at least one drive you can lose. however, you are not protected by silent bit corruption but then you are using btrfs elsewhere. myself i would use lvm to partition and then at least you can move things around later; btrfs lets you do the same afaiu _always_ have your hotspare in the system, then it takes less time to come back up to 100% nothing is quite as scary as having a system waiting on the post and a screwdriver before rebuild can even start > time for a break here. i'd strongly recommend such monitoring software as munin to have running -- this way you can watch trends like io times increasing over time and act on them before things start feeling sluggish well earned break :) > Greets, Stefan > ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [gentoo-user] Intel(R) C600 SAS Controller 2014-06-11 20:17 ` thegeezer @ 2014-06-12 8:15 ` Stefan G. Weichinger 0 siblings, 0 replies; 30+ messages in thread From: Stefan G. Weichinger @ 2014-06-12 8:15 UTC (permalink / raw To: gentoo-user Am 11.06.2014 22:17, schrieb thegeezer: > On 06/11/2014 07:57 PM, Stefan G. Weichinger wrote: >> looks promising: >> > > awesome. i did have a look through the diff, there are lots of scsi > drivers selected, storage (block) cgroups but i think the crucial factor > was the HZ was set at 100 previously and 1000 now. i guess it has > helped kernel-io though maybe a kernel hacker in here might give a more > authoritative answer The help suggests to choose 100 for servers ... the 1000 comes from the sysresccd-setup, yes. I wonder if chosing the "Processor Family" also had an influence. And I even wonder more if I have some bad choices in my desktop's kernel as well ;-) it's a grown setup over years ... For now it looks good ... I will configure the current kernel as a fallback kernel and maybe play with some options. >> One big fat hw-RAID10 might be better? >> But losing the wrong 2 drives makes it crash again ... afaik. > yeah you could argue with raid6 you can _only_ lose two disks, whereas > if you lose the right disks with raid01 you can lose 3 and still rebuild. > raid 0+1 (as opposed to raid10, slightly different) gives you great > speed and at least one drive you can lose. > however, you are not protected by silent bit corruption but then you are > using btrfs elsewhere. ... for the OS, yes ... and maybe for the target of virt-backup. > myself i would use lvm to partition and then at least you can move > things around later; btrfs lets you do the same afaiu > _always_ have your hotspare in the system, then it takes less time to > come back up to 100% > nothing is quite as scary as having a system waiting on the post and a > screwdriver before rebuild can even start good suggestion, sure. That would mean rebuilding the arrays to a RAID6 over 4 or 5 disks and keeping one aside. >> time for a break here. > i'd strongly recommend such monitoring software as munin to have running > -- this way you can watch trends like io times increasing over time and > act on them before things start feeling sluggish I will take a look into it and check how much time I need to learn and set up. > well earned break :) ;-) S ^ permalink raw reply [flat|nested] 30+ messages in thread
end of thread, other threads:[~2014-06-12 8:15 UTC | newest] Thread overview: 30+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-05-23 7:52 [gentoo-user] Intel(R) C600 SAS Controller Stefan G. Weichinger 2014-05-24 19:24 ` Stefan G. Weichinger 2014-05-26 17:47 ` Stefan G. Weichinger 2014-05-26 19:57 ` Stefan G. Weichinger 2014-05-27 13:03 ` Stefan G. Weichinger 2014-06-10 19:57 ` Stefan G. Weichinger 2014-06-10 20:02 ` Stefan G. Weichinger 2014-06-10 22:27 ` Stefan G. Weichinger 2014-06-11 8:47 ` Stefan G. Weichinger 2014-06-11 9:19 ` thegeezer 2014-06-11 9:34 ` Stefan G. Weichinger 2014-06-11 10:14 ` thegeezer 2014-06-11 10:27 ` thegeezer 2014-06-11 10:34 ` Stefan G. Weichinger 2014-06-11 10:41 ` thegeezer 2014-06-11 10:49 ` Stefan G. Weichinger 2014-06-11 11:01 ` thegeezer 2014-06-11 11:20 ` Stefan G. Weichinger 2014-06-11 11:18 ` thegeezer 2014-06-11 11:21 ` Stefan G. Weichinger 2014-06-11 11:52 ` thegeezer 2014-06-11 12:41 ` Stefan G. Weichinger 2014-06-11 13:32 ` thegeezer 2014-06-11 13:44 ` Stefan G. Weichinger 2014-06-11 14:15 ` Stefan G. Weichinger 2014-06-11 14:18 ` thegeezer 2014-06-11 14:38 ` Stefan G. Weichinger 2014-06-11 18:57 ` Stefan G. Weichinger 2014-06-11 20:17 ` thegeezer 2014-06-12 8:15 ` Stefan G. Weichinger
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox