* [gentoo-user] net.eth0 failed to start
@ 2014-03-02 16:14 Skippy
2014-03-02 16:28 ` Canek Peláez Valdés
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Skippy @ 2014-03-02 16:14 UTC (permalink / raw
To: gentoo-user
Hi y'all. I've lost my interwebz and can't view cat pictures. Major
crisis here.
I've killed the internet connection on two computers by doing a world
upgrade. Here's what I've got so far.
Focusing on one of the computers:
Did an upgrade, prior to which all was working fine. To figure out
which packages upgraded I went to my emerge logs. I thought there might
be a clue there. Here are the logs, and thus in my mind, a list of all
the packages that were upgraded.
--------------------------
app-emulation:emul-linux-x86-baselibs-20131008-r19:20140225-162204.log
app-emulation:wine-1.7.13:20140225-160926.log
app-emulation:wine-1.7.13:20140225-164749.log
app-text:calibre-1.25:20140225-164944.log
dev-cpp:libcmis-0.3.1:20140225-170837.log
dev-lang:ruby-2.0.0_p353-r2:20140225-162725.log
dev-libs:cyrus-sasl-2.1.26-r4:20140225-162436.log
dev-libs:gmime-2.6.20:20140225-162511.log
dev-libs:nss-3.15.5:20140225-161141.log
dev-perl:File-MimeInfo-0.210.0:20140225-161940.log
dev-python:feedparser-5.1.3-r2:20140225-162131.log
dev-python:setuptools-2.2:20140225-162106.log
dev-ruby:addressable-2.3.5-r1:20140225-162804.log
dev-ruby:atomic-1.1.14-r1:20140225-162853.log
dev-ruby:buftok-0.2.0-r1:20140225-162738.log
dev-ruby:equalizer-0.0.9:20140225-162828.log
dev-ruby:http-0.5.0:20140225-162751.log
dev-ruby:http_parser_rb-0.6.0:20140225-162841.log
dev-ruby:memoizable-0.4.0:20140225-162918.log
dev-ruby:naught-1.0.0:20140225-162816.log
dev-ruby:thread_safe-0.1.3-r2:20140225-162907.log
dev-ruby:twitter-5.7.1:20140225-162931.log
gnome-base:libgtop-2.28.5:20140225-171016.log
media-libs:harfbuzz-0.9.26:20140225-161925.log
media-libs:mesa-9.2.5-r1:20140225-161815.log
media-video:vlc-2.1.4:20140225-165332.log
net-dialup:rp-pppoe-3.11-r1:20140225-162343.log
net-wireless:wpa_supplicant-2.1-r1:20140225-162011.log
sys-apps:grep-2.18:20140225-161448.log
sys-fs:udev-210:20140225-162321.log
sys-kernel:gentoo-sources-3.13.1:20140225-170955.log
sys-kernel:gentoo-sources-3.13.2:20140225-170720.log
sys-kernel:gentoo-sources-3.13.5:20140225-161405.log
x11-drivers:nvidia-drivers-334.16-r7:20140225-173214.log
x11-drivers:nvidia-drivers-334.16-r7:20140225-173335.log
x11-drivers:nvidia-drivers-334.16-r7:20140225-173815.log
x11-drivers:nvidia-drivers-334.16-r7:20140225-173941.log
x11-libs:gdk-pixbuf-2.30.5:20140225-162044.log
x11-libs:gksu-2.0.2-r1:20140225-170911.log
x11-libs:libgksu-2.0.12-r1:20140225-171010.log
x11-libs:xcb-util-wm-0.4.1:20140225-161203.log
---------------------------
After rebooting I get this at start up
And I'm on kernel 3.12.7 - have been since it came out. Not using
3.13.x yet as it hasn't so far played nice with Nvidia drivers, which
both of my computers use.
----------------------------
Bringing up interface eth0
ERROR: Interface eth0 does not exist
Ensure you have loaded the correct kernel module for your hardware
ERROR: net.eth0 failed to start
--------------------------
Well that looked pretty simple. Alls I need ta do is rebuild my modules
'casuse somehow they got splatted.
I do a make modules_install
-----------------------
INSTALL drivers/char/hw_random/intel-rng.ko
INSTALL drivers/char/kcopy/kcopy.ko
INSTALL drivers/dca/dca.ko
INSTALL drivers/dma/ioat/ioatdma.ko
INSTALL drivers/hid/hid-logitech-dj.ko
INSTALL drivers/hwmon/coretemp.ko
INSTALL drivers/i2c/busses/i2c-i801.ko
INSTALL drivers/net/ethernet/realtek/r8169.ko
INSTALL drivers/net/mii.ko
INSTALL drivers/net/ppp/bsd_comp.ko
INSTALL drivers/net/ppp/ppp_async.ko
INSTALL drivers/net/ppp/ppp_deflate.ko
INSTALL drivers/net/ppp/ppp_mppe.ko
INSTALL drivers/net/ppp/ppp_synctty.ko
INSTALL drivers/net/ppp/pppoe.ko
INSTALL drivers/net/ppp/pppox.ko
INSTALL drivers/thermal/x86_pkg_temp_thermal.ko
INSTALL fs/fuse/fuse.ko
INSTALL lib/crc-ccitt.ko
INSTALL lib/crc7.ko
INSTALL lib/libcrc32c.ko
INSTALL net/netfilter/xt_LOG.ko
INSTALL net/netfilter/xt_mark.ko
INSTALL sound/core/oss/snd-mixer-oss.ko
INSTALL sound/core/oss/snd-pcm-oss.ko
INSTALL sound/core/seq/oss/snd-seq-oss.ko
INSTALL sound/core/seq/snd-seq-device.ko
INSTALL sound/core/seq/snd-seq-midi-event.ko
INSTALL sound/core/seq/snd-seq-midi.ko
INSTALL sound/core/seq/snd-seq.ko
INSTALL sound/core/snd-hwdep.ko
INSTALL sound/core/snd-page-alloc.ko
INSTALL sound/core/snd-pcm.ko
INSTALL sound/core/snd-rawmidi.ko
INSTALL sound/core/snd-timer.ko
INSTALL sound/pci/hda/snd-hda-codec-analog.ko
INSTALL sound/pci/hda/snd-hda-codec-ca0110.ko
INSTALL sound/pci/hda/snd-hda-codec-ca0132.ko
INSTALL sound/pci/hda/snd-hda-codec-cirrus.ko
INSTALL sound/pci/hda/snd-hda-codec-cmedia.ko
INSTALL sound/pci/hda/snd-hda-codec-conexant.ko
INSTALL sound/pci/hda/snd-hda-codec-hdmi.ko
INSTALL sound/pci/hda/snd-hda-codec-idt.ko
INSTALL sound/pci/hda/snd-hda-codec-realtek.ko
INSTALL sound/pci/hda/snd-hda-codec-si3054.ko
INSTALL sound/pci/hda/snd-hda-codec-via.ko
INSTALL sound/pci/hda/snd-hda-codec.ko
INSTALL sound/pci/hda/snd-hda-intel.ko
INSTALL sound/usb/snd-usb-audio.ko
INSTALL sound/usb/snd-usbmidi-lib.ko
DEPMOD 3.12.7-gentoo
-----------------------------
But still the same error message.
I do have kernel 3.13.5 on this box as well, and I can boot that up and
eth0 works just fine.
But since 3.13.5 isn't playing well with nvidia I can't just move
forward with that. Unless the 3.13.x/nvidia issue has been fixed but
I'd rather not experiment until I fix this.
Additionally my laptop is using a nvidia legacy driver as it (the
laptop) is older than dirt. So I'm gonna have to fix the problem on the
laptop.
Whew..... Long winded. Suggestions please?
Thanks.
Skippy
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [gentoo-user] net.eth0 failed to start
2014-03-02 16:14 [gentoo-user] net.eth0 failed to start Skippy
@ 2014-03-02 16:28 ` Canek Peláez Valdés
2014-03-03 15:12 ` [gentoo-user] net.eth0 failed to start *solved* Linux
2014-03-02 16:28 ` [gentoo-user] net.eth0 failed to start Daniel Frey
2014-03-02 22:00 ` Andreas K. Huettel
2 siblings, 1 reply; 5+ messages in thread
From: Canek Peláez Valdés @ 2014-03-02 16:28 UTC (permalink / raw
To: gentoo-user
On Sun, Mar 2, 2014 at 10:14 AM, Skippy <linuxgn2@204eastsouth.com> wrote:
> Hi y'all. I've lost my interwebz and can't view cat pictures. Major
> crisis here.
>
> I've killed the internet connection on two computers by doing a world
> upgrade. Here's what I've got so far.
>
> Focusing on one of the computers:
>
> Did an upgrade, prior to which all was working fine. To figure out
> which packages upgraded I went to my emerge logs. I thought there might
> be a clue there. Here are the logs, and thus in my mind, a list of all
> the packages that were upgraded.
>
> --------------------------
>
> app-emulation:emul-linux-x86-baselibs-20131008-r19:20140225-162204.log
> app-emulation:wine-1.7.13:20140225-160926.log
> app-emulation:wine-1.7.13:20140225-164749.log
> app-text:calibre-1.25:20140225-164944.log
> dev-cpp:libcmis-0.3.1:20140225-170837.log
> dev-lang:ruby-2.0.0_p353-r2:20140225-162725.log
> dev-libs:cyrus-sasl-2.1.26-r4:20140225-162436.log
> dev-libs:gmime-2.6.20:20140225-162511.log
> dev-libs:nss-3.15.5:20140225-161141.log
> dev-perl:File-MimeInfo-0.210.0:20140225-161940.log
> dev-python:feedparser-5.1.3-r2:20140225-162131.log
> dev-python:setuptools-2.2:20140225-162106.log
> dev-ruby:addressable-2.3.5-r1:20140225-162804.log
> dev-ruby:atomic-1.1.14-r1:20140225-162853.log
> dev-ruby:buftok-0.2.0-r1:20140225-162738.log
> dev-ruby:equalizer-0.0.9:20140225-162828.log
> dev-ruby:http-0.5.0:20140225-162751.log
> dev-ruby:http_parser_rb-0.6.0:20140225-162841.log
> dev-ruby:memoizable-0.4.0:20140225-162918.log
> dev-ruby:naught-1.0.0:20140225-162816.log
> dev-ruby:thread_safe-0.1.3-r2:20140225-162907.log
> dev-ruby:twitter-5.7.1:20140225-162931.log
> gnome-base:libgtop-2.28.5:20140225-171016.log
> media-libs:harfbuzz-0.9.26:20140225-161925.log
> media-libs:mesa-9.2.5-r1:20140225-161815.log
> media-video:vlc-2.1.4:20140225-165332.log
> net-dialup:rp-pppoe-3.11-r1:20140225-162343.log
> net-wireless:wpa_supplicant-2.1-r1:20140225-162011.log
> sys-apps:grep-2.18:20140225-161448.log
> sys-fs:udev-210:20140225-162321.log
> sys-kernel:gentoo-sources-3.13.1:20140225-170955.log
> sys-kernel:gentoo-sources-3.13.2:20140225-170720.log
> sys-kernel:gentoo-sources-3.13.5:20140225-161405.log
> x11-drivers:nvidia-drivers-334.16-r7:20140225-173214.log
> x11-drivers:nvidia-drivers-334.16-r7:20140225-173335.log
> x11-drivers:nvidia-drivers-334.16-r7:20140225-173815.log
> x11-drivers:nvidia-drivers-334.16-r7:20140225-173941.log
> x11-libs:gdk-pixbuf-2.30.5:20140225-162044.log
> x11-libs:gksu-2.0.2-r1:20140225-170911.log
> x11-libs:libgksu-2.0.12-r1:20140225-171010.log
> x11-libs:xcb-util-wm-0.4.1:20140225-161203.log
>
> ---------------------------
>
> After rebooting I get this at start up
>
> And I'm on kernel 3.12.7 - have been since it came out. Not using
> 3.13.x yet as it hasn't so far played nice with Nvidia drivers, which
> both of my computers use.
>
> ----------------------------
>
> Bringing up interface eth0
> ERROR: Interface eth0 does not exist
> Ensure you have loaded the correct kernel module for your hardware
> ERROR: net.eth0 failed to start
>
> --------------------------
>
> Well that looked pretty simple. Alls I need ta do is rebuild my modules
> 'casuse somehow they got splatted.
>
> I do a make modules_install
>
> -----------------------
>
> INSTALL drivers/char/hw_random/intel-rng.ko
> INSTALL drivers/char/kcopy/kcopy.ko
> INSTALL drivers/dca/dca.ko
> INSTALL drivers/dma/ioat/ioatdma.ko
> INSTALL drivers/hid/hid-logitech-dj.ko
> INSTALL drivers/hwmon/coretemp.ko
> INSTALL drivers/i2c/busses/i2c-i801.ko
> INSTALL drivers/net/ethernet/realtek/r8169.ko
> INSTALL drivers/net/mii.ko
> INSTALL drivers/net/ppp/bsd_comp.ko
> INSTALL drivers/net/ppp/ppp_async.ko
> INSTALL drivers/net/ppp/ppp_deflate.ko
> INSTALL drivers/net/ppp/ppp_mppe.ko
> INSTALL drivers/net/ppp/ppp_synctty.ko
> INSTALL drivers/net/ppp/pppoe.ko
> INSTALL drivers/net/ppp/pppox.ko
> INSTALL drivers/thermal/x86_pkg_temp_thermal.ko
> INSTALL fs/fuse/fuse.ko
> INSTALL lib/crc-ccitt.ko
> INSTALL lib/crc7.ko
> INSTALL lib/libcrc32c.ko
> INSTALL net/netfilter/xt_LOG.ko
> INSTALL net/netfilter/xt_mark.ko
> INSTALL sound/core/oss/snd-mixer-oss.ko
> INSTALL sound/core/oss/snd-pcm-oss.ko
> INSTALL sound/core/seq/oss/snd-seq-oss.ko
> INSTALL sound/core/seq/snd-seq-device.ko
> INSTALL sound/core/seq/snd-seq-midi-event.ko
> INSTALL sound/core/seq/snd-seq-midi.ko
> INSTALL sound/core/seq/snd-seq.ko
> INSTALL sound/core/snd-hwdep.ko
> INSTALL sound/core/snd-page-alloc.ko
> INSTALL sound/core/snd-pcm.ko
> INSTALL sound/core/snd-rawmidi.ko
> INSTALL sound/core/snd-timer.ko
> INSTALL sound/pci/hda/snd-hda-codec-analog.ko
> INSTALL sound/pci/hda/snd-hda-codec-ca0110.ko
> INSTALL sound/pci/hda/snd-hda-codec-ca0132.ko
> INSTALL sound/pci/hda/snd-hda-codec-cirrus.ko
> INSTALL sound/pci/hda/snd-hda-codec-cmedia.ko
> INSTALL sound/pci/hda/snd-hda-codec-conexant.ko
> INSTALL sound/pci/hda/snd-hda-codec-hdmi.ko
> INSTALL sound/pci/hda/snd-hda-codec-idt.ko
> INSTALL sound/pci/hda/snd-hda-codec-realtek.ko
> INSTALL sound/pci/hda/snd-hda-codec-si3054.ko
> INSTALL sound/pci/hda/snd-hda-codec-via.ko
> INSTALL sound/pci/hda/snd-hda-codec.ko
> INSTALL sound/pci/hda/snd-hda-intel.ko
> INSTALL sound/usb/snd-usb-audio.ko
> INSTALL sound/usb/snd-usbmidi-lib.ko
> DEPMOD 3.12.7-gentoo
>
> -----------------------------
>
> But still the same error message.
>
> I do have kernel 3.13.5 on this box as well, and I can boot that up and
> eth0 works just fine.
>
> But since 3.13.5 isn't playing well with nvidia I can't just move
> forward with that. Unless the 3.13.x/nvidia issue has been fixed but
> I'd rather not experiment until I fix this.
>
> Additionally my laptop is using a nvidia legacy driver as it (the
> laptop) is older than dirt. So I'm gonna have to fix the problem on the
> laptop.
>
> Whew..... Long winded. Suggestions please?
You upgraded udev and lost support for the legacy network interface
names. You should read [1] to really understand the issue, but as a
workaround you can add the following to your kernel command line:
"net.ifnames=0". Do it in /etc/default/grub (in the GRUB_CMDLINE_LINUX
variable) if you use GRUB2 (and create the config again with
grub2-mkconfig), or in /boo/grub/grub.cfg, at the end of the "kernel"
line, if you are using grub-legacy.
Regards.
[1] http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames/
--
Canek Peláez Valdés
Posgrado en Ciencia e Ingeniería de la Computación
Universidad Nacional Autónoma de México
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [gentoo-user] net.eth0 failed to start *solved*
2014-03-02 16:28 ` Canek Peláez Valdés
@ 2014-03-03 15:12 ` Linux
0 siblings, 0 replies; 5+ messages in thread
From: Linux @ 2014-03-03 15:12 UTC (permalink / raw
To: gentoo-user
Yes, that was the correct answer. Added "net.ifnames=0" to GRUB and
everything is happy. Much thanks for your responses. I am always
grateful for the collective wisdom of this list.
Skippy
On 3/2/2014 9:28 AM, Canek Peláez Valdés wrote:
>
> You upgraded udev and lost support for the legacy network interface
> names. You should read [1] to really understand the issue, but as a
> workaround you can add the following to your kernel command line:
> "net.ifnames=0". Do it in /etc/default/grub (in the GRUB_CMDLINE_LINUX
> variable) if you use GRUB2 (and create the config again with
> grub2-mkconfig), or in /boo/grub/grub.cfg, at the end of the "kernel"
> line, if you are using grub-legacy.
>
> Regards.
>
> [1] http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames/
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [gentoo-user] net.eth0 failed to start
2014-03-02 16:14 [gentoo-user] net.eth0 failed to start Skippy
2014-03-02 16:28 ` Canek Peláez Valdés
@ 2014-03-02 16:28 ` Daniel Frey
2014-03-02 22:00 ` Andreas K. Huettel
2 siblings, 0 replies; 5+ messages in thread
From: Daniel Frey @ 2014-03-02 16:28 UTC (permalink / raw
To: gentoo-user
On 03/02/2014 08:14 AM, Skippy wrote:
> Did an upgrade, prior to which all was working fine. To figure out
> which packages upgraded I went to my emerge logs. I thought there might
> be a clue there. Here are the logs, and thus in my mind, a list of all
> the packages that were upgraded.
>
> --------------------------
>
> sys-fs:udev-210:20140225-162321.log
>
> ---------------------------
>
> After rebooting I get this at start up
>
> ----------------------------
>
> Bringing up interface eth0
> ERROR: Interface eth0 does not exist
> Ensure you have loaded the correct kernel module for your hardware
> ERROR: net.eth0 failed to start
>
> --------------------------
What's the output of `ifconfig -a` ?
What's the output of 'lsmod' ?
What's the output of `lspci -k` ?
Sounds like your network devices have been renamed.
Dan
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [gentoo-user] net.eth0 failed to start
2014-03-02 16:14 [gentoo-user] net.eth0 failed to start Skippy
2014-03-02 16:28 ` Canek Peláez Valdés
2014-03-02 16:28 ` [gentoo-user] net.eth0 failed to start Daniel Frey
@ 2014-03-02 22:00 ` Andreas K. Huettel
2 siblings, 0 replies; 5+ messages in thread
From: Andreas K. Huettel @ 2014-03-02 22:00 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: Text/Plain, Size: 706 bytes --]
Am Sonntag, 2. März 2014, 17:14:54 schrieb Skippy:
> Hi y'all. I've lost my interwebz and can't view cat pictures. Major
> crisis here.
>
Hey Skippy,
dont worry the lolcats are all still there. udev-210 is the culprit. See [1,2]
for details. For a quick workaround, add
net.ifnames=0
to your kernel command line (e.g. in grub.conf or grub.cfg) and reboot.
Cheers,
Andreas
[1] http://sources.gentoo.org/gitweb/?p=proj/gentoo-news.git;a=blob;f=2014/2014-02-25-udev-upgrade/2014-02-25-udev-upgrade.en.txt;hb=HEAD
[2] https://wiki.gentoo.org/wiki/Udev/upgrade#udev_208_to_210
--
Andreas K. Huettel
Gentoo Linux developer
dilfridge@gentoo.org
http://www.akhuettel.de/
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 966 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-03-03 15:13 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-03-02 16:14 [gentoo-user] net.eth0 failed to start Skippy
2014-03-02 16:28 ` Canek Peláez Valdés
2014-03-03 15:12 ` [gentoo-user] net.eth0 failed to start *solved* Linux
2014-03-02 16:28 ` [gentoo-user] net.eth0 failed to start Daniel Frey
2014-03-02 22:00 ` Andreas K. Huettel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox