[gentoo-user] building app fails with QT3 requirements

[gentoo-user] building app fails with QT3 requirements

[Tamer Higazi]

Hi people!
I wanted to build a qt3 application from source, that is not in the
portage tree.

http://www.tipp10.com/en/index/

What needs to be done from my side to compile this application successful?!

-------

tamer@office /storage/downloads/tipp10_source_v2-1-0 $ ./configure
Configuring tipp10 ...
Verifying Qt 3.x Multithreaded (MT) build environment ... fail

Unable to find Qt 'mkspecs'.  Perhaps you need to
install the Qt 3 development utilities.  You may download
them either from the vendor of your operating system
or from http://www.trolltech.com/

If you're sure you have the Qt development utilities
installed, you might try using the --qtdir option.

Re: [gentoo-user] building app fails with QT3 requirements

[Florian Philipp]

[-- Attachment #1: Type: text/plain, Size: 1026 bytes --]

Am 22.12.2012 11:56, schrieb Tamer Higazi:
> Hi people!
> I wanted to build a qt3 application from source, that is not in the
> portage tree.
> 
> http://www.tipp10.com/en/index/
> 
> What needs to be done from my side to compile this application successful?!
> 
> -------
> 
> tamer@office /storage/downloads/tipp10_source_v2-1-0 $ ./configure
> Configuring tipp10 ...
> Verifying Qt 3.x Multithreaded (MT) build environment ... fail
> 
> Unable to find Qt 'mkspecs'.  Perhaps you need to
> install the Qt 3 development utilities.  You may download
> them either from the vendor of your operating system
> or from http://www.trolltech.com/
> 
> If you're sure you have the Qt development utilities
> installed, you might try using the --qtdir option.
> 
> 

Try "--qtdir /usr/share/qt4". Make sure you have enabled
USE="qt3support". If that doesn't work and you cannot patch the app,
there are several overlays that contain a slotted Qt-3:
gentoo-taiwan, n4g, soor

Regards,
Florian Philipp


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]