* [gentoo-user] Kernel 3.6: No external Monitor @ 2012-11-20 7:44 Norman Rieß 2012-11-20 12:51 ` Bruce Hill 0 siblings, 1 reply; 11+ messages in thread From: Norman Rieß @ 2012-11-20 7:44 UTC (permalink / raw To: gentoo-user Hello, i am using a Thinkpad X301 with a DVI Monitor connected to the mini displayport. That worked perfectly for years, but with Kernel 3.6 (and 3.7rc) the DVI Monitor stays black on boot and it is not visible in xrandr. As if it wasn't connected at all. Rebooting with 3.5 brings back the Display with full functionality. All i found about this was a Fedora bugreport stating the issue, but is unanswered for a month now. Does someone got an idea here or faced the same issue and solved it? Regards, Norman ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [gentoo-user] Kernel 3.6: No external Monitor 2012-11-20 7:44 [gentoo-user] Kernel 3.6: No external Monitor Norman Rieß @ 2012-11-20 12:51 ` Bruce Hill 2012-11-20 13:52 ` Norman Rieß 0 siblings, 1 reply; 11+ messages in thread From: Bruce Hill @ 2012-11-20 12:51 UTC (permalink / raw To: gentoo-user On Tue, Nov 20, 2012 at 08:44:08AM +0100, Norman Rieß wrote: > Hello, > > i am using a Thinkpad X301 with a DVI Monitor connected to the mini > displayport. > That worked perfectly for years, but with Kernel 3.6 (and 3.7rc) the DVI > Monitor stays black on boot and it is not visible in xrandr. As if it > wasn't connected at all. > Rebooting with 3.5 brings back the Display with full functionality. > > All i found about this was a Fedora bugreport stating the issue, but is > unanswered for a month now. > > Does someone got an idea here or faced the same issue and solved it? > > Regards, > Norman Can you give us a link to: (1) the Fedora bug report (2) your 3.5 kernel .config (3) your 3.6 (and 3.7rc) kernel .config(s) -- Happy Penguin Computers >') 126 Fenco Drive ( \ Tupelo, MS 38801 ^^ support@happypenguincomputers.com 662-269-2706 662-205-6424 http://happypenguincomputers.com/ Don't top-post: http://en.wikipedia.org/wiki/Top_post#Top-posting ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [gentoo-user] Kernel 3.6: No external Monitor 2012-11-20 12:51 ` Bruce Hill @ 2012-11-20 13:52 ` Norman Rieß 2012-11-20 18:02 ` Florian Philipp 0 siblings, 1 reply; 11+ messages in thread From: Norman Rieß @ 2012-11-20 13:52 UTC (permalink / raw To: gentoo-user Am 20.11.2012 13:51, schrieb Bruce Hill: > On Tue, Nov 20, 2012 at 08:44:08AM +0100, Norman Rieß wrote: >> Hello, >> >> i am using a Thinkpad X301 with a DVI Monitor connected to the mini >> displayport. >> That worked perfectly for years, but with Kernel 3.6 (and 3.7rc) the DVI >> Monitor stays black on boot and it is not visible in xrandr. As if it >> wasn't connected at all. >> Rebooting with 3.5 brings back the Display with full functionality. >> >> All i found about this was a Fedora bugreport stating the issue, but is >> unanswered for a month now. >> >> Does someone got an idea here or faced the same issue and solved it? >> >> Regards, >> Norman > > Can you give us a link to: > > (1) the Fedora bug report > (2) your 3.5 kernel .config > (3) your 3.6 (and 3.7rc) kernel .config(s) > Yes. (1) https://bugzilla.redhat.com/show_bug.cgi?id=869824 (2) http://smash-net.org/temp/config-3.5.4 (3) http://smash-net.org/temp/config-3.6.6 http://smash-net.org/temp/config-3.7.0-rc6 ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [gentoo-user] Kernel 3.6: No external Monitor 2012-11-20 13:52 ` Norman Rieß @ 2012-11-20 18:02 ` Florian Philipp 2012-11-20 18:33 ` Norman Rieß 0 siblings, 1 reply; 11+ messages in thread From: Florian Philipp @ 2012-11-20 18:02 UTC (permalink / raw To: gentoo-user [-- Attachment #1: Type: text/plain, Size: 1212 bytes --] Am 20.11.2012 14:52, schrieb Norman Rieß: > Am 20.11.2012 13:51, schrieb Bruce Hill: >> On Tue, Nov 20, 2012 at 08:44:08AM +0100, Norman Rieß wrote: >>> Hello, >>> >>> i am using a Thinkpad X301 with a DVI Monitor connected to the mini >>> displayport. >>> That worked perfectly for years, but with Kernel 3.6 (and 3.7rc) the DVI >>> Monitor stays black on boot and it is not visible in xrandr. As if it >>> wasn't connected at all. >>> Rebooting with 3.5 brings back the Display with full functionality. >>> >>> All i found about this was a Fedora bugreport stating the issue, but is >>> unanswered for a month now. >>> >>> Does someone got an idea here or faced the same issue and solved it? >>> >>> Regards, >>> Norman >> >> Can you give us a link to: >> >> (1) the Fedora bug report >> (2) your 3.5 kernel .config >> (3) your 3.6 (and 3.7rc) kernel .config(s) >> > > Yes. > (1) https://bugzilla.redhat.com/show_bug.cgi?id=869824 > > (2) http://smash-net.org/temp/config-3.5.4 > (3) http://smash-net.org/temp/config-3.6.6 > http://smash-net.org/temp/config-3.7.0-rc6 > > > What does `xrandr --current` say? (from x11-apps/xrandr) Regards, Florian Philipp [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 262 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [gentoo-user] Kernel 3.6: No external Monitor 2012-11-20 18:02 ` Florian Philipp @ 2012-11-20 18:33 ` Norman Rieß 2012-11-20 19:08 ` Damien Levac 0 siblings, 1 reply; 11+ messages in thread From: Norman Rieß @ 2012-11-20 18:33 UTC (permalink / raw To: gentoo-user Am 20.11.2012 19:02, schrieb Florian Philipp: > Am 20.11.2012 14:52, schrieb Norman Rieß: >> Am 20.11.2012 13:51, schrieb Bruce Hill: >>> On Tue, Nov 20, 2012 at 08:44:08AM +0100, Norman Rieß wrote: >>>> Hello, >>>> >>>> i am using a Thinkpad X301 with a DVI Monitor connected to the mini >>>> displayport. >>>> That worked perfectly for years, but with Kernel 3.6 (and 3.7rc) the DVI >>>> Monitor stays black on boot and it is not visible in xrandr. As if it >>>> wasn't connected at all. >>>> Rebooting with 3.5 brings back the Display with full functionality. >>>> >>>> All i found about this was a Fedora bugreport stating the issue, but is >>>> unanswered for a month now. >>>> >>>> Does someone got an idea here or faced the same issue and solved it? >>>> >>>> Regards, >>>> Norman >>> >>> Can you give us a link to: >>> >>> (1) the Fedora bug report >>> (2) your 3.5 kernel .config >>> (3) your 3.6 (and 3.7rc) kernel .config(s) >>> >> >> Yes. >> (1) https://bugzilla.redhat.com/show_bug.cgi?id=869824 >> >> (2) http://smash-net.org/temp/config-3.5.4 >> (3) http://smash-net.org/temp/config-3.6.6 >> http://smash-net.org/temp/config-3.7.0-rc6 >> >> >> > > What does `xrandr --current` say? (from x11-apps/xrandr) > > Regards, > Florian Philipp > In what situation? 3.5 or 3.6 kernel? ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [gentoo-user] Kernel 3.6: No external Monitor 2012-11-20 18:33 ` Norman Rieß @ 2012-11-20 19:08 ` Damien Levac 2012-11-20 20:35 ` Norman Rieß 0 siblings, 1 reply; 11+ messages in thread From: Damien Levac @ 2012-11-20 19:08 UTC (permalink / raw To: gentoo-user On 11/20/12 13:33, Norman Rieß wrote: > Am 20.11.2012 19:02, schrieb Florian Philipp: >> Am 20.11.2012 14:52, schrieb Norman Rieß: >>> Am 20.11.2012 13:51, schrieb Bruce Hill: >>>> On Tue, Nov 20, 2012 at 08:44:08AM +0100, Norman Rieß wrote: >>>>> Hello, >>>>> >>>>> i am using a Thinkpad X301 with a DVI Monitor connected to the mini >>>>> displayport. >>>>> That worked perfectly for years, but with Kernel 3.6 (and 3.7rc) the DVI >>>>> Monitor stays black on boot and it is not visible in xrandr. As if it >>>>> wasn't connected at all. >>>>> Rebooting with 3.5 brings back the Display with full functionality. >>>>> >>>>> All i found about this was a Fedora bugreport stating the issue, but is >>>>> unanswered for a month now. >>>>> >>>>> Does someone got an idea here or faced the same issue and solved it? >>>>> >>>>> Regards, >>>>> Norman >>>> Can you give us a link to: >>>> >>>> (1) the Fedora bug report >>>> (2) your 3.5 kernel .config >>>> (3) your 3.6 (and 3.7rc) kernel .config(s) >>>> >>> Yes. >>> (1) https://bugzilla.redhat.com/show_bug.cgi?id=869824 >>> >>> (2) http://smash-net.org/temp/config-3.5.4 >>> (3) http://smash-net.org/temp/config-3.6.6 >>> http://smash-net.org/temp/config-3.7.0-rc6 >>> >>> >>> >> What does `xrandr --current` say? (from x11-apps/xrandr) >> >> Regards, >> Florian Philipp >> > In what situation? 3.5 or 3.6 kernel? > In doubt, both. But I'm fairly sure he meant 3.6 since there are no problem to solve in 3.5. :P Damien ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [gentoo-user] Kernel 3.6: No external Monitor 2012-11-20 19:08 ` Damien Levac @ 2012-11-20 20:35 ` Norman Rieß 2012-11-20 21:46 ` Damien Levac 2012-11-20 22:24 ` Florian Philipp 0 siblings, 2 replies; 11+ messages in thread From: Norman Rieß @ 2012-11-20 20:35 UTC (permalink / raw To: gentoo-user Am 20.11.2012 20:08, schrieb Damien Levac: > On 11/20/12 13:33, Norman Rieß wrote: >> Am 20.11.2012 19:02, schrieb Florian Philipp: >>> Am 20.11.2012 14:52, schrieb Norman Rieß: >>>> Am 20.11.2012 13:51, schrieb Bruce Hill: >>>>> On Tue, Nov 20, 2012 at 08:44:08AM +0100, Norman Rieß wrote: >>>>>> Hello, >>>>>> >>>>>> i am using a Thinkpad X301 with a DVI Monitor connected to the mini >>>>>> displayport. >>>>>> That worked perfectly for years, but with Kernel 3.6 (and 3.7rc) the DVI >>>>>> Monitor stays black on boot and it is not visible in xrandr. As if it >>>>>> wasn't connected at all. >>>>>> Rebooting with 3.5 brings back the Display with full functionality. >>>>>> >>>>>> All i found about this was a Fedora bugreport stating the issue, but is >>>>>> unanswered for a month now. >>>>>> >>>>>> Does someone got an idea here or faced the same issue and solved it? >>>>>> >>>>>> Regards, >>>>>> Norman >>>>> Can you give us a link to: >>>>> >>>>> (1) the Fedora bug report >>>>> (2) your 3.5 kernel .config >>>>> (3) your 3.6 (and 3.7rc) kernel .config(s) >>>>> >>>> Yes. >>>> (1) https://bugzilla.redhat.com/show_bug.cgi?id=869824 >>>> >>>> (2) http://smash-net.org/temp/config-3.5.4 >>>> (3) http://smash-net.org/temp/config-3.6.6 >>>> http://smash-net.org/temp/config-3.7.0-rc6 >>>> >>>> >>>> >>> What does `xrandr --current` say? (from x11-apps/xrandr) >>> >>> Regards, >>> Florian Philipp >>> >> In what situation? 3.5 or 3.6 kernel? >> > In doubt, both. But I'm fairly sure he meant 3.6 since there are no > problem to solve in 3.5. :P > > Damien > Yeah, i was kinda irritated by that question, as i allready said, that xrandr does not show the display. 3.5 activates the display during kernel loading, on 3.6 it stays shut off during the whole boot process. 3.6: xrandr --current Screen 0: minimum 320 x 200, current 1440 x 900, maximum 32767 x 32767 LVDS1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 287mm x 180mm 1440x900 60.0*+ 50.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) --------------------------------------------- 3.5 both screens mirrored: xrandr --current Screen 0: minimum 320 x 200, current 1440 x 900, maximum 32767 x 32767 LVDS1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 287mm x 180mm 1440x900 60.0*+ 50.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 60.0 + 1600x1200 60.0 1680x1050 59.9 1680x945 60.0 1400x1050 59.9 1600x900 60.0 1280x1024 60.0 1440x900 59.9* 1280x960 60.0 1366x768 60.0 1360x768 60.0 1280x800 59.9 1280x768 60.0 1024x768 60.0 1024x576 60.0 800x600 60.3 56.2 848x480 60.0 640x480 60.0 DP1 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) --------------------------------------------- 3.5 in my dualscreen setup: xrandr --current Screen 0: minimum 320 x 200, current 3360 x 1200, maximum 32767 x 32767 LVDS1 connected 1440x900+1920+0 (normal left inverted right x axis y axis) 287mm x 180mm 1440x900 60.0*+ 50.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 60.0*+ 1600x1200 60.0 1680x1050 59.9 1680x945 60.0 1400x1050 59.9 1600x900 60.0 1280x1024 60.0 1440x900 59.9 1280x960 60.0 1366x768 60.0 1360x768 60.0 1280x800 59.9 1280x768 60.0 1024x768 60.0 1024x576 60.0 800x600 60.3 56.2 848x480 60.0 640x480 60.0 DP1 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [gentoo-user] Kernel 3.6: No external Monitor 2012-11-20 20:35 ` Norman Rieß @ 2012-11-20 21:46 ` Damien Levac 2012-11-20 22:24 ` Florian Philipp 1 sibling, 0 replies; 11+ messages in thread From: Damien Levac @ 2012-11-20 21:46 UTC (permalink / raw To: gentoo-user On 11/20/12 15:35, Norman Rieß wrote: > Am 20.11.2012 20:08, schrieb Damien Levac: >> On 11/20/12 13:33, Norman Rieß wrote: >>> Am 20.11.2012 19:02, schrieb Florian Philipp: >>>> Am 20.11.2012 14:52, schrieb Norman Rieß: >>>>> Am 20.11.2012 13:51, schrieb Bruce Hill: >>>>>> On Tue, Nov 20, 2012 at 08:44:08AM +0100, Norman Rieß wrote: >>>>>>> Hello, >>>>>>> >>>>>>> i am using a Thinkpad X301 with a DVI Monitor connected to the mini >>>>>>> displayport. >>>>>>> That worked perfectly for years, but with Kernel 3.6 (and 3.7rc) the DVI >>>>>>> Monitor stays black on boot and it is not visible in xrandr. As if it >>>>>>> wasn't connected at all. >>>>>>> Rebooting with 3.5 brings back the Display with full functionality. >>>>>>> >>>>>>> All i found about this was a Fedora bugreport stating the issue, but is >>>>>>> unanswered for a month now. >>>>>>> >>>>>>> Does someone got an idea here or faced the same issue and solved it? >>>>>>> >>>>>>> Regards, >>>>>>> Norman >>>>>> Can you give us a link to: >>>>>> >>>>>> (1) the Fedora bug report >>>>>> (2) your 3.5 kernel .config >>>>>> (3) your 3.6 (and 3.7rc) kernel .config(s) >>>>>> >>>>> Yes. >>>>> (1) https://bugzilla.redhat.com/show_bug.cgi?id=869824 >>>>> >>>>> (2) http://smash-net.org/temp/config-3.5.4 >>>>> (3) http://smash-net.org/temp/config-3.6.6 >>>>> http://smash-net.org/temp/config-3.7.0-rc6 >>>>> >>>>> >>>>> >>>> What does `xrandr --current` say? (from x11-apps/xrandr) >>>> >>>> Regards, >>>> Florian Philipp >>>> >>> In what situation? 3.5 or 3.6 kernel? >>> >> In doubt, both. But I'm fairly sure he meant 3.6 since there are no >> problem to solve in 3.5. :P >> >> Damien >> > Yeah, i was kinda irritated by that question, as i allready said, that > xrandr does not show the display. > 3.5 activates the display during kernel loading, on 3.6 it stays shut > off during the whole boot process. > > > 3.6: > xrandr --current > Screen 0: minimum 320 x 200, current 1440 x 900, maximum 32767 x 32767 > LVDS1 connected 1440x900+0+0 (normal left inverted right x axis y axis) > 287mm x 180mm > 1440x900 60.0*+ 50.0 > 1024x768 60.0 > 800x600 60.3 56.2 > 640x480 59.9 > VGA1 disconnected (normal left inverted right x axis y axis) > HDMI1 disconnected (normal left inverted right x axis y axis) > DP1 disconnected (normal left inverted right x axis y axis) > DP2 disconnected (normal left inverted right x axis y axis) > > --------------------------------------------- > 3.5 both screens mirrored: > xrandr --current > Screen 0: minimum 320 x 200, current 1440 x 900, maximum 32767 x 32767 > LVDS1 connected 1440x900+0+0 (normal left inverted right x axis y axis) > 287mm x 180mm > 1440x900 60.0*+ 50.0 > 1024x768 60.0 > 800x600 60.3 56.2 > 640x480 59.9 > VGA1 disconnected (normal left inverted right x axis y axis) > HDMI1 connected 1440x900+0+0 (normal left inverted right x axis y axis) > 518mm x 324mm > 1920x1200 60.0 + > 1600x1200 60.0 > 1680x1050 59.9 > 1680x945 60.0 > 1400x1050 59.9 > 1600x900 60.0 > 1280x1024 60.0 > 1440x900 59.9* > 1280x960 60.0 > 1366x768 60.0 > 1360x768 60.0 > 1280x800 59.9 > 1280x768 60.0 > 1024x768 60.0 > 1024x576 60.0 > 800x600 60.3 56.2 > 848x480 60.0 > 640x480 60.0 > DP1 disconnected (normal left inverted right x axis y axis) > DP2 disconnected (normal left inverted right x axis y axis) > > --------------------------------------------- > 3.5 in my dualscreen setup: > xrandr --current > Screen 0: minimum 320 x 200, current 3360 x 1200, maximum 32767 x 32767 > LVDS1 connected 1440x900+1920+0 (normal left inverted right x axis y > axis) 287mm x 180mm > 1440x900 60.0*+ 50.0 > 1024x768 60.0 > 800x600 60.3 56.2 > 640x480 59.9 > VGA1 disconnected (normal left inverted right x axis y axis) > HDMI1 connected 1920x1200+0+0 (normal left inverted right x axis y axis) > 518mm x 324mm > 1920x1200 60.0*+ > 1600x1200 60.0 > 1680x1050 59.9 > 1680x945 60.0 > 1400x1050 59.9 > 1600x900 60.0 > 1280x1024 60.0 > 1440x900 59.9 > 1280x960 60.0 > 1366x768 60.0 > 1360x768 60.0 > 1280x800 59.9 > 1280x768 60.0 > 1024x768 60.0 > 1024x576 60.0 > 800x600 60.3 56.2 > 848x480 60.0 > 640x480 60.0 > DP1 disconnected (normal left inverted right x axis y axis) > DP2 disconnected (normal left inverted right x axis y axis) > I know this is not really what you want to hear about, but you should wait for the fix to solve itself. The reason I'm saying this is that Intel programmers are really working hard on their graphics drivers with Steam comming to Linux and this is probably just a bug in their drivers to which we have no power. I could also be wrong though but I learned to just back off and wait when a new kernel version breaks something. Damien ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [gentoo-user] Kernel 3.6: No external Monitor 2012-11-20 20:35 ` Norman Rieß 2012-11-20 21:46 ` Damien Levac @ 2012-11-20 22:24 ` Florian Philipp 2012-11-21 17:09 ` Norman Rieß 1 sibling, 1 reply; 11+ messages in thread From: Florian Philipp @ 2012-11-20 22:24 UTC (permalink / raw To: gentoo-user [-- Attachment #1: Type: text/plain, Size: 1149 bytes --] Am 20.11.2012 21:35, schrieb Norman Rieß: > Am 20.11.2012 20:08, schrieb Damien Levac: >> On 11/20/12 13:33, Norman Rieß wrote: >>> Am 20.11.2012 19:02, schrieb Florian Philipp: >>>> Am 20.11.2012 14:52, schrieb Norman Rieß: >>>>> Am 20.11.2012 13:51, schrieb Bruce Hill: >>>>>> On Tue, Nov 20, 2012 at 08:44:08AM +0100, Norman Rieß wrote: >>>>>>> Hello, >>>>>>> >>>>>>> i am using a Thinkpad X301 with a DVI Monitor connected to the mini >>>>>>> displayport. >>>>>>> That worked perfectly for years, but with Kernel 3.6 (and 3.7rc) the DVI >>>>>>> Monitor stays black on boot and it is not visible in xrandr. As if it >>>>>>> wasn't connected at all. [...] >>>> What does `xrandr --current` say? (from x11-apps/xrandr) >>>> >>> In what situation? 3.5 or 3.6 kernel? >>> >> In doubt, both. But I'm fairly sure he meant 3.6 since there are no >> problem to solve in 3.5. :P >> > > Yeah, i was kinda irritated by that question, as i allready said, that > xrandr does not show the display. [...] Sorry, missed that part. Can you try without KMS? http://wiki.debian.org/KernelModesetting Regards, Florian Philipp [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 262 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [gentoo-user] Kernel 3.6: No external Monitor 2012-11-20 22:24 ` Florian Philipp @ 2012-11-21 17:09 ` Norman Rieß 2012-11-21 17:45 ` Bruce Hill 0 siblings, 1 reply; 11+ messages in thread From: Norman Rieß @ 2012-11-21 17:09 UTC (permalink / raw To: gentoo-user Am 20.11.2012 23:24, schrieb Florian Philipp: > Am 20.11.2012 21:35, schrieb Norman Rieß: >> Am 20.11.2012 20:08, schrieb Damien Levac: >>> On 11/20/12 13:33, Norman Rieß wrote: >>>> Am 20.11.2012 19:02, schrieb Florian Philipp: >>>>> Am 20.11.2012 14:52, schrieb Norman Rieß: >>>>>> Am 20.11.2012 13:51, schrieb Bruce Hill: >>>>>>> On Tue, Nov 20, 2012 at 08:44:08AM +0100, Norman Rieß wrote: >>>>>>>> Hello, >>>>>>>> >>>>>>>> i am using a Thinkpad X301 with a DVI Monitor connected to the mini >>>>>>>> displayport. >>>>>>>> That worked perfectly for years, but with Kernel 3.6 (and 3.7rc) the DVI >>>>>>>> Monitor stays black on boot and it is not visible in xrandr. As if it >>>>>>>> wasn't connected at all. > [...] >>>>> What does `xrandr --current` say? (from x11-apps/xrandr) >>>>> >>>> In what situation? 3.5 or 3.6 kernel? >>>> >>> In doubt, both. But I'm fairly sure he meant 3.6 since there are no >>> problem to solve in 3.5. :P >>> >> >> Yeah, i was kinda irritated by that question, as i allready said, that >> xrandr does not show the display. > [...] > > Sorry, missed that part. > > Can you try without KMS? > http://wiki.debian.org/KernelModesetting > > Regards, > Florian Philipp > Setting nomodeset does not solve the problem. Regards, Norman ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [gentoo-user] Kernel 3.6: No external Monitor 2012-11-21 17:09 ` Norman Rieß @ 2012-11-21 17:45 ` Bruce Hill 0 siblings, 0 replies; 11+ messages in thread From: Bruce Hill @ 2012-11-21 17:45 UTC (permalink / raw To: gentoo-user On Wed, Nov 21, 2012 at 06:09:47PM +0100, Norman Rieß wrote: > > Setting nomodeset does not solve the problem. > > Regards, > Norman Sorry I didn't have the time to reply ... RL is consuming me. You can search on the Linux Kernel Mailing List https://lkml.org/ to see if this bug is there, also. If it is a kernel bug, it will get fixed; and it would be best for you to stay with whatever 3.5 series kernel works for now. Or better yet, since 3.5 is EOL, use a 3.4 series such as 3.4.19. -- Happy Penguin Computers >') 126 Fenco Drive ( \ Tupelo, MS 38801 ^^ support@happypenguincomputers.com 662-269-2706 662-205-6424 http://happypenguincomputers.com/ Don't top-post: http://en.wikipedia.org/wiki/Top_post#Top-posting ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2012-11-21 17:46 UTC | newest] Thread overview: 11+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-11-20 7:44 [gentoo-user] Kernel 3.6: No external Monitor Norman Rieß 2012-11-20 12:51 ` Bruce Hill 2012-11-20 13:52 ` Norman Rieß 2012-11-20 18:02 ` Florian Philipp 2012-11-20 18:33 ` Norman Rieß 2012-11-20 19:08 ` Damien Levac 2012-11-20 20:35 ` Norman Rieß 2012-11-20 21:46 ` Damien Levac 2012-11-20 22:24 ` Florian Philipp 2012-11-21 17:09 ` Norman Rieß 2012-11-21 17:45 ` Bruce Hill
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox