Francisco Ares wrote:
>
> 2012/10/12 Dale <rdalek1967@gmail.com <mailto:rdalek1967@gmail.com>>
>
>     Francisco Ares wrote:
>     >
>     >
>     > Thanks for your reply, Dale.
>     >
>     > Yes, everything works as expected when using the old kernel.
>     >
>     > I decided to re-emerge some base libraries, and nothing worked,
>     until
>     > I remembered to re-emerge udev. After the build, it announced two
>     > wrong lines in the new kernel "config" file:
>     >
>     > CONFIG_SYSFS_DEPRECATED=y
>     > CONFIG_SYSFS_DEPRECATED_V2=y
>     >
>     > After correcting them and building the kernel again, now
>     everything is
>     > back to normal.
>     >
>     > Thanks again
>     > Francisco
>     >
>     >
>     > --
>     > "If you have an apple and I have an apple and we exchange apples
>     then
>     > you and I will still each have one apple. But if you have an
>     idea and
>     > I have one idea and we exchange these ideas, then each of us
>     will have
>     > two ideas." - George Bernard Shaw
>
>
>     Do you use oldconfig or build each one from scratch?  I use
>     oldconfig so
>     that I at least have what I know works.  It's just a matter of if
>     I need
>     anything new enabled.  Some claim oldconfig shouldn't be used but
>     I have
>     only had it to fail once in the last 10 years or so.  Most everyone I
>     know of uses oldconfig.
>
>     Glad you got it going tho.
>
>     Dale
>
>     :-)  :-)
>
>     --
>     I am only responsible for what I said ... Not for what you
>     understood or how you interpreted my words!
>
>
>
>
> I normally also use oldconfig. I think there might be a reason for it
> to be around. But this time I didn't, because the old kernel was
> version 2.6.39 and I thought oldconfig would mess things up more than
> help on the new 3.4.9. Don't know how right or wrong is this
> assumption, though.
>
> I just was lazy to upgrade the kernel, as it takes an hour or so to
> check most of menucofig.
>
> Francisco
>

I would have tried it but that is a LOT of updates.  It may be faster to
start from scratch in that case.  I know a few years ago there was some
changes that kept oldconfig from working as it should.  That was the
only time it failed me but I do upgrade more often to avoid this sort of
thing.  I try to upgrade every couple months.  Now if I have long
uptimes, I may not actually ever use that kernel but I have a config
file to copy over that is a bit more up to date. 

I would suggest printing or something the output of the following: 
lspci -k  That tells you what you need for your hardware, that is of
course from a kernel where all your hardware works.  There may be some
specific things for certain software that is needed but at least you can
boot up and have a system to work with.  I usually leave the rest to
defaults unless I am sure there is something I don't need. 

Glad you got it sorted out and working tho. 

Dale

:-)  :-) 

-- 
I am only responsible for what I said ... Not for what you understood or how you interpreted my words!