public inbox for gentoo-user@lists.gentoo.org
 help / color / mirror / Atom feed
From: Joerg.Schilling@fokus.fraunhofer.de (Joerg Schilling)
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] write failed on dvd with growisofs
Date: Mon, 16 Aug 2010 14:29:45 +0200	[thread overview]
Message-ID: <4c692f39.xY34FPI86nHvaFIn%Joerg.Schilling@fokus.fraunhofer.de> (raw)
In-Reply-To: <20100815212835.183ec73e.gryf73@op.pl>

Roman Dobosz <gryf73@op.pl> wrote:

> Also, cdrecord doesn't work:
>
> # cdrecord -v -dev=4,0,0 /mnt/data/t.iso 
> cdrecord: No write mode specified.
> cdrecord: Assuming -sao mode.
> cdrecord: If your drive does not accept -sao, try -tao.
> cdrecord: Future versions of cdrecord may have different drive dependent defaults.
> Cdrecord-ProDVD-ProBD-Clone 3.00 (i686-pc-linux-gnu) Copyright (C) 1995-2010 Jörg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '4,0,0'
> scsibus: 4 target: 0 lun: 0
> Linux sg driver version: 3.5.34
> Using libscg version 'schily-0.9'.
> SCSI buffer size: 64512
> atapi: 1
> Device type    : Removable CD-ROM
> Version        : 5
> Response Format: 2
> Capabilities   : 
> Vendor_info    : 'PIONEER '
> Identifikation : 'DVD-RW  DVR-216D'
> Revision       : '1.08'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
> Current: DVD-R sequential recording
> Profile: DVD+R/DL 
> Profile: DVD+R 
> Profile: DVD+RW 
> Profile: DVD-R/DL layer jump recording 
> Profile: DVD-R/DL sequential recording 
> Profile: DVD-RW sequential recording 
> Profile: DVD-RW restricted overwrite 
> Profile: DVD-R sequential recording (current)
> Profile: DVD-ROM (current)
> Profile: CD-RW 
> Profile: CD-R 
> Profile: CD-ROM 
> Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
> Driver flags   : NO-CD DVD MMC-3 SWABAUDIO BURNFREE 
> Supported modes: PACKET SAO LAYER_JUMP
> Drive buf size : 1605632 = 1568 KB
> cdrecord: Warning: Cannot read drive buffer.
> cdrecord: Warning: The DMA speed test has been skipped.
> FIFO size      : 4194304 = 4096 KB
> Track 01: data  1313 MB        
> Total size:     1313 MB = 672399 sectors
> Current Secsize: 2048
> Total power on  hours: 75040
> WARNING: Phys disk size 16 differs from rzone size 0! Prerecorded disk?
> WARNING: Phys start: 196608 Phys end 196623
> WARNING: Drive returns zero media size. Using media size from ADIP.
> Blocks total: 16 Blocks current: -93936 Blocks remaining: -766335
> cdrecord: Data does not fit on current disk.

It seems that the workaround for the Pioneer firmware bug does not handle the 
multi-border case.

> Please, note, that ISO image have 1.2 GB so it should fit on DVD-R
> I'm using Verbatim discs, which is recognized by cdrecord as:
>
> # cdrecord -v -minfo
> Cdrecord-ProDVD-ProBD-Clone 3.00 (i686-pc-linux-gnu) Copyright (C) 1995-2010 Jörg Schilling
> TOC Type: 1 = CD-ROM
> Linux sg driver version: 3.5.34
> Using libscg version 'schily-0.9'.
> SCSI buffer size: 32768
> No target specified, trying to find one...
> Using dev=4,0,0.
> atapi: 1
> Device type    : Removable CD-ROM
> Version        : 5
> Response Format: 2
> Capabilities   : 
> Vendor_info    : 'PIONEER '
> Identifikation : 'DVD-RW  DVR-216D'
> Revision       : '1.08'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
> Current: DVD-R sequential recording
> Profile: DVD+R/DL 
> Profile: DVD+R 
> Profile: DVD+RW 
> Profile: DVD-R/DL layer jump recording 
> Profile: DVD-R/DL sequential recording 
> Profile: DVD-RW sequential recording 
> Profile: DVD-RW restricted overwrite 
> Profile: DVD-R sequential recording (current)
> Profile: DVD-ROM (current)
> Profile: CD-RW 
> Profile: CD-R 
> Profile: CD-ROM 
> Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
> Driver flags   : NO-CD DVD MMC-3 SWABAUDIO BURNFREE 
> Supported modes: PACKET SAO LAYER_JUMP
> Drive buf size : 1605632 = 1568 KB
> cdrecord: Warning: Cannot read drive buffer.
> cdrecord: Warning: The DMA speed test has been skipped.
> Current Secsize: 2048
> Total power on  hours: 75040
> book type:       DVD-R, Version 2.0x -> 2.1 (2.5)
> disc size:       120mm (0)
> maximum rate:    Not specified (15)
> number of layers:1
> track path:      Parallel Track Path (0)
> layer type:      Rewritable Area (2)
> linear density:  0.267 µm/bit (0)
> track density:   0.74 µm/track (0)
> phys start:      196608 (0x30000) 
> phys end:        196623
> end layer 0:     0
> bca:             0
> phys size:...    16
> copyr prot type: 0
> region mgt info: 0
> cpm:             0
> cgms:            0
> last rma sector: 0
> application code:64
> physical code:   193
> last rec address:16621272
> part v./ext code:5/2
> ind wr. power:   133
> wavelength code: 13
> write str. code: 0E 88 9A 80
> Manufacturer:   'MCC 03RG20  '
> rzone size:         36
> rzone number:       1
> border number:      1
> ljrs:               0
> track mode:         4 copy: 0
> damage:             0
> reserved track:     0 blank: 0 incremental: 1 fp: 0
> data mode:          1
> lra valid:          1
> nwa valid:          0
> rzone start:        0
> next wr addr:       0
> free blocks:        0
> blocking factor:    16
> rzone size:         65264
> last recorded addr: 15
>
>     Capacity  Blklen/Sparesz.  Format-type  Type
>        65264             2048         0x00  Formatted Media
> WARNING: Phys disk size 16 differs from rzone size 0! Prerecorded disk?
> WARNING: Phys start: 196608 Phys end 196623
> WARNING: Drive returns zero media size. Using media size from ADIP.
> Mounted media class:      DVD
> Mounted media type:       DVD-R sequential recording
> Disk Is not erasable
> data type:                standard
> disk status:              incomplete/appendable
> session status:           empty
> BG format status:         none
> first track:              1
> number of sessions:       2
> first track in last sess: 2
> last track in last sess:  2
> Disk Is unrestricted
> Disk type: DVD, HD-DVD or BD
>
> Track  Sess Type   Start Addr End Addr   Size
> ==============================================
>     1     1 Data   0          65263      65264         -1
>     2     2 Blank  93952      2297887    2203936      28688
>
> Last session start address:         0
> Last session leadout start address: 65264
> Next writable address:              93952
> Remaining writable size:            2203936

The media was written before and seems to be appendable.
Is this what you intend to do?

Jörg

-- 
 EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
       js@cs.tu-berlin.de                (uni)  
       joerg.schilling@fokus.fraunhofer.de (work) Blog: http://schily.blogspot.com/
 URL:  http://cdrecord.berlios.de/private/ ftp://ftp.berlios.de/pub/schily



  reply	other threads:[~2010-08-16 12:30 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-10 20:27 [gentoo-user] write failed on dvd with growisofs linux
2010-08-10 21:14 ` Joerg Schilling
2010-08-11 12:24   ` linux
2010-08-11 13:18     ` Joerg Schilling
2010-08-11 13:35       ` linux
     [not found]         ` <4c62bb1d.ZdBA0cyMxvmVVX94%Joerg.Schilling@fokus.fraunhofer.de>
2010-08-11 17:38           ` linux
2010-08-11 16:06             ` Joerg Schilling
2010-08-13 11:47               ` [gentoo-user] write failed on dvd with growisofs [SOLVED] Gabriel Striewe
2010-08-10 21:15 ` [gentoo-user] write failed on dvd with growisofs linux
2010-08-15 19:28 ` Roman Dobosz
2010-08-16 12:29   ` Joerg Schilling [this message]
2010-08-16 18:54     ` Roman Dobosz
2010-08-16 19:47       ` Roman Dobosz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4c692f39.xY34FPI86nHvaFIn%Joerg.Schilling@fokus.fraunhofer.de \
    --to=joerg.schilling@fokus.fraunhofer.de \
    --cc=gentoo-user@lists.gentoo.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox