[gentoo-user] write failed on dvd with growisofs

[gentoo-user] write failed on dvd with growisofs

[linux]

Hello,

I am incurring a strange problem when trying to burn DVDs. When I
apply the command: 

# growisofs -dvd-compat -Z /dev/sr0 -R -J test/

I get the following output: 

Executing 'mkisofs -R -J test/ | builtin_dd of=/dev/sr0 obs=32k seek=0'
Total translation table size: 0
Total rockridge attributes bytes: 273
Total directory bytes: 0
Path table size(bytes): 10
Max brk space used 0
182 extents written (0 MB)
/dev/sr0: "Current Write Speed" is 2.5x1352KBps.
:-[ WRITE@LBA=0h failed with SK=5h/WRITE PROTECTED]: Input/output error
:-( write failed: Input/output error

I am using a kernel 2.6.33-rt from the proaudio-overlay with the new
serial and parallel ATA stack, not the old deprecated ATA-stack.

This is what dvd+rw-mediainfo says: 

INQUIRY:                [SONY    ][DVD RW DW-Q58A  ][UFS2]
GET [CURRENT] CONFIGURATION:
 Mounted Media:         1Bh, DVD+R
 Media ID:              RITEK/F16
 Current Write Speed:   2.4x1385=3324KB/s
 Write Speed #0:        2.4x1385=3324KB/s
GET [CURRENT] PERFORMANCE:
 Write Performance:     2.4x1385=3324KB/s@[0 -> 0]
 Speed Descriptor#0:    00/0 R@8.0x1385=11080KB/s W@2.4x1385=3324KB/s
READ DVD STRUCTURE[#0h]:
 Media Book Type:       00h, DVD-ROM book [revision 0]
 Legacy lead-out at:    2295104*2KB=4700372992
READ DISC INFORMATION:
 Disc status:           blank
 Number of Sessions:    1
 State of Last Session: empty
 "Next" Track:          1
 Number of Tracks:      1
READ TRACK INFORMATION[#1]:
 Track State:           blank
 Track Start Address:   0*2KB
 Next Writable Address: 0*2KB
 Free Blocks:           2295104*2KB
 Track Size:            2295104*2KB
 ROM Compatibility LBA: 265696
READ CAPACITY:          0*2048=0


Unfortunately, I reproduced this error on an non-RT 2.6.34 kernel with
the same config.

Anybody has got any ideas?

Regards, 

Gabriel 

Re: [gentoo-user] write failed on dvd with growisofs

[Joerg Schilling]

linux@gabriel-striewe.de wrote:

> Hello,
>
> I am incurring a strange problem when trying to burn DVDs. When I
> apply the command: 
>
> # growisofs -dvd-compat -Z /dev/sr0 -R -J test/
>
> I get the following output: 
>
> Executing 'mkisofs -R -J test/ | builtin_dd of=/dev/sr0 obs=32k seek=0'
> Total translation table size: 0
> Total rockridge attributes bytes: 273
> Total directory bytes: 0
> Path table size(bytes): 10
> Max brk space used 0
> 182 extents written (0 MB)
> /dev/sr0: "Current Write Speed" is 2.5x1352KBps.
> :-[ WRITE@LBA=0h failed with SK=5h/WRITE PROTECTED]: Input/output error
> :-( write failed: Input/output error

Did you try to use cdrecord instead?
Did you try to kill hald before?

Jörg

-- 
 EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
       js@cs.tu-berlin.de                (uni)  
       joerg.schilling@fokus.fraunhofer.de (work) Blog: http://schily.blogspot.com/
 URL:  http://cdrecord.berlios.de/private/ ftp://ftp.berlios.de/pub/schily

Re: [gentoo-user] write failed on dvd with growisofs

[linux]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=unknown-8bit, Size: 3819 bytes --]

On Tue, Aug 10, 2010 at 11:14:55PM +0200, Joerg Schilling wrote:
> linux@gabriel-striewe.de wrote:
> 
> > Hello,
> >
> > I am incurring a strange problem when trying to burn DVDs. When I
> > apply the command: 
> >
> > # growisofs -dvd-compat -Z /dev/sr0 -R -J test/
> >
> > I get the following output: 
> >
> > Executing 'mkisofs -R -J test/ | builtin_dd of=/dev/sr0 obs=32k seek=0'
> > Total translation table size: 0
> > Total rockridge attributes bytes: 273
> > Total directory bytes: 0
> > Path table size(bytes): 10
> > Max brk space used 0
> > 182 extents written (0 MB)
> > /dev/sr0: "Current Write Speed" is 2.5x1352KBps.
> > :-[ WRITE@LBA=0h failed with SK=5h/WRITE PROTECTED]: Input/output error
> > :-( write failed: Input/output error
> 
> Did you try to use cdrecord instead?
> Did you try to kill hald before?
> 
> J?rg
> 

/etc/init.d/hald status
* status: stopped

using cdrecord on a DVD+RW works fine, but I have this error when I
try to burn a DVD-R: 

gstriewe@laptop ~ $ cdrecord -v dev=0,1,0 test.iso 
cdrecord: No write mode specified.
cdrecord: Assuming -sao mode.
cdrecord: If your drive does not accept -sao, try -tao.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
Cdrecord-ProDVD-ProBD-Clone 3.00 (i686-pc-linux-gnu) Copyright (C) 1995-2010 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
Linux sg driver version: 3.5.34
Using libscg version 'schily-0.9'.
SCSI buffer size: 64512
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'SONY    '
Identifikation : 'DVD RW DW-Q58A  '
Revision       : 'UFS2'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD+R
Profile: DVD+R/DL 
Profile: DVD+R (current)
Profile: DVD+RW 
Profile: DVD-RW sequential recording 
Profile: DVD-RW restricted overwrite 
Profile: DVD-R sequential recording 
Profile: DVD-ROM 
Profile: CD-RW 
Profile: CD-R 
Profile: CD-ROM 
cdrecord: Warning: controller returns wrong page 3 for Ricoh Vendor Page page (30).
Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
Driver flags   : NO-CD DVD MMC-3 SWABAUDIO BURNFREE 
Supported modes: PACKET SAO
Drive buf size : 1602048 = 1564 KB
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
FIFO size      : 4194304 = 4096 KB
Track 01: data     0 MB         padsize:  236 KB
Total size:        0 MB = 300 sectors

Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 2294804
Reducing transfer size from 64512 to 32768 bytes.
cdrecord: Warning: controller returns wrong page 3 for Ricoh Vendor Page page (30).
Starting to write CD/DVD/BD at speed 2 in real SAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 01:    0 of    0 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 10 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 27 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x27 Qual 0x00 (write protected) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.014s timeout 200s

write track data: error after 0 bytes
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
Writing  time:    5.037s
Average write speed   0.1x.
Fixating...
Fixating time:    0.009s
cdrecord: fifo had 12 puts and 1 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.

Hope this helps somehow. Thank you for your quick response..


Gabriel 

Re: [gentoo-user] write failed on dvd with growisofs

[Joerg Schilling]

linux@gabriel-striewe.de wrote:

> /etc/init.d/hald status
> * status: stopped
>
> using cdrecord on a DVD+RW works fine, but I have this error when I
> try to burn a DVD-R: 

OK, could you send the outout from cdrecord -v -minfo
with this medium?

Jörg

-- 
 EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
       js@cs.tu-berlin.de                (uni)  
       joerg.schilling@fokus.fraunhofer.de (work) Blog: http://schily.blogspot.com/
 URL:  http://cdrecord.berlios.de/private/ ftp://ftp.berlios.de/pub/schily

Re: [gentoo-user] write failed on dvd with growisofs

[linux]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=unknown-8bit, Size: 3457 bytes --]

On Wed, Aug 11, 2010 at 03:18:57PM +0200, Joerg Schilling wrote:
> linux@gabriel-striewe.de wrote:
> 
> > /etc/init.d/hald status
> > * status: stopped
> >
> > using cdrecord on a DVD+RW works fine, but I have this error when I
> > try to burn a DVD-R: 
> 
> OK, could you send the outout from cdrecord -v -minfo
> with this medium?
> 
> J?rg
> 

$> cdrecord -v -minfo
Linux sg driver version: 3.5.34
SCSI buffer size: 32768
No target specified, trying to find one...
Using dev=0,1,0.
cdrecord: Warning: controller returns wrong page 3 for Ricoh Vendor Page page (30).
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
Cdrecord-ProDVD-ProBD-Clone 3.00 (i686-pc-linux-gnu) Copyright (C) 1995-2010 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.9'.
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'SONY    '
Identifikation : 'DVD RW DW-Q58A  '
Revision       : 'UFS2'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD+R
Profile: DVD+R/DL 
Profile: DVD+R (current)
Profile: DVD+RW 
Profile: DVD-RW sequential recording 
Profile: DVD-RW restricted overwrite 
Profile: DVD-R sequential recording 
Profile: DVD-ROM 
Profile: CD-RW 
Profile: CD-R 
Profile: CD-ROM 
Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
Driver flags   : NO-CD DVD MMC-3 SWABAUDIO BURNFREE 
Supported modes: PACKET SAO
Drive buf size : 1602048 = 1564 KB
Current Secsize: 2048
book type:       DVD+R, Version (10.1)
disc size:       120mm (0)
maximum rate:    Not specified (15)
number of layers:1
track path:      Parallel Track Path (0)
layer type:      Rewritable Area (2)
linear density:  0.267 µm/bit (0)
track density:   0.74 µm/track (0)
phys start:      196608 (0x30000) 
phys end:        2491711
end layer 0:     0
bca:             0
phys size:...    2295104
Manufacturer:    'RITEK'
Media type:      'F16'
Category/Version	A1
Disk size		0F
Disk structure		02
Recoding density	00
Manufacturer:		'RITEK'
Media type:		'F16'
Product revision	1
ADIP numbytes		56
Reference speed		35
Max speed		84
rzone size:         40
rzone number:       1
border number:      1
ljrs:               0
track mode:         7 copy: 0
damage:             0
reserved track:     0 blank: 1 incremental: 0 fp: 0
data mode:          1
lra valid:          0
nwa valid:          1
rzone start:        0
next wr addr:       0
free blocks:        2295104
blocking factor:    16
rzone size:         2295104
last recorded addr: 0
read compat lba:    265696

    Capacity  Blklen/Sparesz.  Format-type  Type
     2295104             2048         0x00  Unformated or Blank Media
Mounted media class:      DVD
Mounted media type:       DVD+R
Disk Is not erasable
data type:                standard
disk status:              empty
session status:           empty
BG format status:         none
first track:              1
number of sessions:       1
first track in last sess: 1
last track in last sess:  1
Disk Is unrestricted
Disk type: DVD, HD-DVD or BD

Track  Sess Type   Start Addr End Addr   Size
==============================================
    1     1 Blank  0          2295103    2295104         -1

Next writable address:              0
Remaining writable size:            2295104

Thanks for your help,

Gabriel 

Re: [gentoo-user] write failed on dvd with growisofs

[linux]

On Wed, Aug 11, 2010 at 05:00:45PM +0200, Joerg Schilling wrote:
> linux@gabriel-striewe.de wrote:
> 
> > On Wed, Aug 11, 2010 at 03:18:57PM +0200, Joerg Schilling wrote:
> > > linux@gabriel-striewe.de wrote:
> > > 
> > > > /etc/init.d/hald status
> > > > * status: stopped
> > > >
> > > > using cdrecord on a DVD+RW works fine, but I have this error when I
> > > > try to burn a DVD-R: 
> > > 
> > > OK, could you send the outout from cdrecord -v -minfo
> > > with this medium?
> 
> 
> Ritek may not be the best media quality. Did you try Verbatim?
> 
> 
> J?rg

They were from Aldi, however I used also CDR from there, they seem to
be manufactured by Plasmon Data Systems (both are labeled
Tevion). With those CDR I have usually no problem. I realize however
that my DVDRW which work without problems are from Verbatim. So I will
try out Verbatim DVD+R and report back to the list how it's going.

Thanks for your help

Gabriel

Re: [gentoo-user] write failed on dvd with growisofs

[Joerg Schilling]

linux@gabriel-striewe.de wrote:

> > Ritek may not be the best media quality. Did you try Verbatim?
> > 
> > 
> > J?rg
>
> They were from Aldi, however I used also CDR from there, they seem to
> be manufactured by Plasmon Data Systems (both are labeled
> Tevion). With those CDR I have usually no problem. I realize however
> that my DVDRW which work without problems are from Verbatim. So I will
> try out Verbatim DVD+R and report back to the list how it's going.

Not all drives work well with all media.

Jörg

-- 
 EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
       js@cs.tu-berlin.de                (uni)  
       joerg.schilling@fokus.fraunhofer.de (work) Blog: http://schily.blogspot.com/
 URL:  http://cdrecord.berlios.de/private/ ftp://ftp.berlios.de/pub/schily

Re: [gentoo-user] write failed on dvd with growisofs [SOLVED]

[Gabriel Striewe]

On Wed, Aug 11, 2010 at 06:06:18PM +0200, Joerg Schilling wrote:
> linux@gabriel-striewe.de wrote:
> 
> > > Ritek may not be the best media quality. Did you try Verbatim?
> > > 
> > > 
> > > J?rg
> >
> > They were from Aldi, however I used also CDR from there, they seem to
> > be manufactured by Plasmon Data Systems (both are labeled
> > Tevion). With those CDR I have usually no problem. I realize however
> > that my DVDRW which work without problems are from Verbatim. So I will
> > try out Verbatim DVD+R and report back to the list how it's going.
> 
> Not all drives work well with all media.

This issue is solved, VERBATIM media worked fine.

Thanks a lot for your help.

Gabriel 

Re: [gentoo-user] write failed on dvd with growisofs

[linux]

On Tue, Aug 10, 2010 at 10:27:27PM +0200, linux@gabriel-striewe.de wrote:
> Hello,
> 
> I am incurring a strange problem when trying to burn DVDs. When I
> apply the command: 
> 
> # growisofs -dvd-compat -Z /dev/sr0 -R -J test/
> 
> I get the following output: 
> 
> Executing 'mkisofs -R -J test/ | builtin_dd of=/dev/sr0 obs=32k seek=0'
> Total translation table size: 0
> Total rockridge attributes bytes: 273
> Total directory bytes: 0
> Path table size(bytes): 10
> Max brk space used 0
> 182 extents written (0 MB)
> /dev/sr0: "Current Write Speed" is 2.5x1352KBps.
> :-[ WRITE@LBA=0h failed with SK=5h/WRITE PROTECTED]: Input/output error
> :-( write failed: Input/output error
> 
> I am using a kernel 2.6.33-rt from the proaudio-overlay with the new
> serial and parallel ATA stack, not the old deprecated ATA-stack.
> 
> This is what dvd+rw-mediainfo says: 
> 
> INQUIRY:                [SONY    ][DVD RW DW-Q58A  ][UFS2]
> GET [CURRENT] CONFIGURATION:
>  Mounted Media:         1Bh, DVD+R
>  Media ID:              RITEK/F16
>  Current Write Speed:   2.4x1385=3324KB/s
>  Write Speed #0:        2.4x1385=3324KB/s
> GET [CURRENT] PERFORMANCE:
>  Write Performance:     2.4x1385=3324KB/s@[0 -> 0]
>  Speed Descriptor#0:    00/0 R@8.0x1385=11080KB/s W@2.4x1385=3324KB/s
> READ DVD STRUCTURE[#0h]:
>  Media Book Type:       00h, DVD-ROM book [revision 0]
>  Legacy lead-out at:    2295104*2KB=4700372992
> READ DISC INFORMATION:
>  Disc status:           blank
>  Number of Sessions:    1
>  State of Last Session: empty
>  "Next" Track:          1
>  Number of Tracks:      1
> READ TRACK INFORMATION[#1]:
>  Track State:           blank
>  Track Start Address:   0*2KB
>  Next Writable Address: 0*2KB
>  Free Blocks:           2295104*2KB
>  Track Size:            2295104*2KB
>  ROM Compatibility LBA: 265696
> READ CAPACITY:          0*2048=0
> 
> 
> Unfortunately, I reproduced this error on an non-RT 2.6.34 kernel with
> the same config.
> 
> Anybody has got any ideas?
> 
> Regards, 
> 
> Gabriel 


I have to add that writing DVD+RW works fine. How could this be?

Regards,

Gabriel 

Re: [gentoo-user] write failed on dvd with growisofs

[Roman Dobosz]

On Tue, 10 Aug 2010 22:27:27 +0200
linux@gabriel-striewe.de wrote:

> I am incurring a strange problem when trying to burn DVDs. When I
> apply the command: 
> 
> # growisofs -dvd-compat -Z /dev/sr0 -R -J test/
[...]

I have the similar problem on standard kernel 2.6.34-gentoo-r1:

# growisofs -Z /dev/sr0 -R -J -V "test" /mnt/data/t
Executing 'mkisofs -R -J -V test /mnt/data/t | builtin_dd of=/dev/sr0 obs=32k seek=0'
Setting input-charset to 'UTF-8' from locale.
  0.74% done, estimate finish Sun Aug 15 20:56:13 2010
  1.49% done, estimate finish Sun Aug 15 20:56:13 2010
  2.23% done, estimate finish Sun Aug 15 20:56:13 2010
/dev/sr0: "Current Write Speed" is 20.5x1352KBps.
:-[ WRITE@LBA=10h failed with SK=5h/INVALID ADDRESS FOR WRITE]: Invalid argument
:-( write failed: Invalid argument
/dev/sr0: flushing cache
/dev/sr0: updating RMA
/dev/sr0: closing session
/dev/sr0: reloading tray

I've used Verbatim DVD-R, which I've successfully used before (like
one year before), but this time it is always like this.

My system doesn't use hald:
# /etc/init.d/hald status
 * status:  stopped

Also, cdrecord doesn't work:

# cdrecord -v -dev=4,0,0 /mnt/data/t.iso 
cdrecord: No write mode specified.
cdrecord: Assuming -sao mode.
cdrecord: If your drive does not accept -sao, try -tao.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
Cdrecord-ProDVD-ProBD-Clone 3.00 (i686-pc-linux-gnu) Copyright (C) 1995-2010 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '4,0,0'
scsibus: 4 target: 0 lun: 0
Linux sg driver version: 3.5.34
Using libscg version 'schily-0.9'.
SCSI buffer size: 64512
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'PIONEER '
Identifikation : 'DVD-RW  DVR-216D'
Revision       : '1.08'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD-R sequential recording
Profile: DVD+R/DL 
Profile: DVD+R 
Profile: DVD+RW 
Profile: DVD-R/DL layer jump recording 
Profile: DVD-R/DL sequential recording 
Profile: DVD-RW sequential recording 
Profile: DVD-RW restricted overwrite 
Profile: DVD-R sequential recording (current)
Profile: DVD-ROM (current)
Profile: CD-RW 
Profile: CD-R 
Profile: CD-ROM 
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
Driver flags   : NO-CD DVD MMC-3 SWABAUDIO BURNFREE 
Supported modes: PACKET SAO LAYER_JUMP
Drive buf size : 1605632 = 1568 KB
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
FIFO size      : 4194304 = 4096 KB
Track 01: data  1313 MB        
Total size:     1313 MB = 672399 sectors
Current Secsize: 2048
Total power on  hours: 75040
WARNING: Phys disk size 16 differs from rzone size 0! Prerecorded disk?
WARNING: Phys start: 196608 Phys end 196623
WARNING: Drive returns zero media size. Using media size from ADIP.
Blocks total: 16 Blocks current: -93936 Blocks remaining: -766335
cdrecord: Data does not fit on current disk.

Please, note, that ISO image have 1.2 GB so it should fit on DVD-R
I'm using Verbatim discs, which is recognized by cdrecord as:

# cdrecord -v -minfo
Cdrecord-ProDVD-ProBD-Clone 3.00 (i686-pc-linux-gnu) Copyright (C) 1995-2010 Jörg Schilling
TOC Type: 1 = CD-ROM
Linux sg driver version: 3.5.34
Using libscg version 'schily-0.9'.
SCSI buffer size: 32768
No target specified, trying to find one...
Using dev=4,0,0.
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'PIONEER '
Identifikation : 'DVD-RW  DVR-216D'
Revision       : '1.08'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD-R sequential recording
Profile: DVD+R/DL 
Profile: DVD+R 
Profile: DVD+RW 
Profile: DVD-R/DL layer jump recording 
Profile: DVD-R/DL sequential recording 
Profile: DVD-RW sequential recording 
Profile: DVD-RW restricted overwrite 
Profile: DVD-R sequential recording (current)
Profile: DVD-ROM (current)
Profile: CD-RW 
Profile: CD-R 
Profile: CD-ROM 
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
Driver flags   : NO-CD DVD MMC-3 SWABAUDIO BURNFREE 
Supported modes: PACKET SAO LAYER_JUMP
Drive buf size : 1605632 = 1568 KB
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
Current Secsize: 2048
Total power on  hours: 75040
book type:       DVD-R, Version 2.0x -> 2.1 (2.5)
disc size:       120mm (0)
maximum rate:    Not specified (15)
number of layers:1
track path:      Parallel Track Path (0)
layer type:      Rewritable Area (2)
linear density:  0.267 µm/bit (0)
track density:   0.74 µm/track (0)
phys start:      196608 (0x30000) 
phys end:        196623
end layer 0:     0
bca:             0
phys size:...    16
copyr prot type: 0
region mgt info: 0
cpm:             0
cgms:            0
last rma sector: 0
application code:64
physical code:   193
last rec address:16621272
part v./ext code:5/2
ind wr. power:   133
wavelength code: 13
write str. code: 0E 88 9A 80
Manufacturer:   'MCC 03RG20  '
rzone size:         36
rzone number:       1
border number:      1
ljrs:               0
track mode:         4 copy: 0
damage:             0
reserved track:     0 blank: 0 incremental: 1 fp: 0
data mode:          1
lra valid:          1
nwa valid:          0
rzone start:        0
next wr addr:       0
free blocks:        0
blocking factor:    16
rzone size:         65264
last recorded addr: 15

    Capacity  Blklen/Sparesz.  Format-type  Type
       65264             2048         0x00  Formatted Media
WARNING: Phys disk size 16 differs from rzone size 0! Prerecorded disk?
WARNING: Phys start: 196608 Phys end 196623
WARNING: Drive returns zero media size. Using media size from ADIP.
Mounted media class:      DVD
Mounted media type:       DVD-R sequential recording
Disk Is not erasable
data type:                standard
disk status:              incomplete/appendable
session status:           empty
BG format status:         none
first track:              1
number of sessions:       2
first track in last sess: 2
last track in last sess:  2
Disk Is unrestricted
Disk type: DVD, HD-DVD or BD

Track  Sess Type   Start Addr End Addr   Size
==============================================
    1     1 Data   0          65263      65264         -1
    2     2 Blank  93952      2297887    2203936      28688

Last session start address:         0
Last session leadout start address: 65264
Next writable address:              93952
Remaining writable size:            2203936


Any hints?

-- 
      -^-  _        coś tam w tle sobie gra, np:
   _ /O)_\//        Blindead - Suicidal
  (_(|__(_(_) grf.  

Re: [gentoo-user] write failed on dvd with growisofs

[Joerg Schilling]

Roman Dobosz <gryf73@op.pl> wrote:

> Also, cdrecord doesn't work:
>
> # cdrecord -v -dev=4,0,0 /mnt/data/t.iso 
> cdrecord: No write mode specified.
> cdrecord: Assuming -sao mode.
> cdrecord: If your drive does not accept -sao, try -tao.
> cdrecord: Future versions of cdrecord may have different drive dependent defaults.
> Cdrecord-ProDVD-ProBD-Clone 3.00 (i686-pc-linux-gnu) Copyright (C) 1995-2010 Jörg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '4,0,0'
> scsibus: 4 target: 0 lun: 0
> Linux sg driver version: 3.5.34
> Using libscg version 'schily-0.9'.
> SCSI buffer size: 64512
> atapi: 1
> Device type    : Removable CD-ROM
> Version        : 5
> Response Format: 2
> Capabilities   : 
> Vendor_info    : 'PIONEER '
> Identifikation : 'DVD-RW  DVR-216D'
> Revision       : '1.08'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
> Current: DVD-R sequential recording
> Profile: DVD+R/DL 
> Profile: DVD+R 
> Profile: DVD+RW 
> Profile: DVD-R/DL layer jump recording 
> Profile: DVD-R/DL sequential recording 
> Profile: DVD-RW sequential recording 
> Profile: DVD-RW restricted overwrite 
> Profile: DVD-R sequential recording (current)
> Profile: DVD-ROM (current)
> Profile: CD-RW 
> Profile: CD-R 
> Profile: CD-ROM 
> Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
> Driver flags   : NO-CD DVD MMC-3 SWABAUDIO BURNFREE 
> Supported modes: PACKET SAO LAYER_JUMP
> Drive buf size : 1605632 = 1568 KB
> cdrecord: Warning: Cannot read drive buffer.
> cdrecord: Warning: The DMA speed test has been skipped.
> FIFO size      : 4194304 = 4096 KB
> Track 01: data  1313 MB        
> Total size:     1313 MB = 672399 sectors
> Current Secsize: 2048
> Total power on  hours: 75040
> WARNING: Phys disk size 16 differs from rzone size 0! Prerecorded disk?
> WARNING: Phys start: 196608 Phys end 196623
> WARNING: Drive returns zero media size. Using media size from ADIP.
> Blocks total: 16 Blocks current: -93936 Blocks remaining: -766335
> cdrecord: Data does not fit on current disk.

It seems that the workaround for the Pioneer firmware bug does not handle the 
multi-border case.

> Please, note, that ISO image have 1.2 GB so it should fit on DVD-R
> I'm using Verbatim discs, which is recognized by cdrecord as:
>
> # cdrecord -v -minfo
> Cdrecord-ProDVD-ProBD-Clone 3.00 (i686-pc-linux-gnu) Copyright (C) 1995-2010 Jörg Schilling
> TOC Type: 1 = CD-ROM
> Linux sg driver version: 3.5.34
> Using libscg version 'schily-0.9'.
> SCSI buffer size: 32768
> No target specified, trying to find one...
> Using dev=4,0,0.
> atapi: 1
> Device type    : Removable CD-ROM
> Version        : 5
> Response Format: 2
> Capabilities   : 
> Vendor_info    : 'PIONEER '
> Identifikation : 'DVD-RW  DVR-216D'
> Revision       : '1.08'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
> Current: DVD-R sequential recording
> Profile: DVD+R/DL 
> Profile: DVD+R 
> Profile: DVD+RW 
> Profile: DVD-R/DL layer jump recording 
> Profile: DVD-R/DL sequential recording 
> Profile: DVD-RW sequential recording 
> Profile: DVD-RW restricted overwrite 
> Profile: DVD-R sequential recording (current)
> Profile: DVD-ROM (current)
> Profile: CD-RW 
> Profile: CD-R 
> Profile: CD-ROM 
> Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
> Driver flags   : NO-CD DVD MMC-3 SWABAUDIO BURNFREE 
> Supported modes: PACKET SAO LAYER_JUMP
> Drive buf size : 1605632 = 1568 KB
> cdrecord: Warning: Cannot read drive buffer.
> cdrecord: Warning: The DMA speed test has been skipped.
> Current Secsize: 2048
> Total power on  hours: 75040
> book type:       DVD-R, Version 2.0x -> 2.1 (2.5)
> disc size:       120mm (0)
> maximum rate:    Not specified (15)
> number of layers:1
> track path:      Parallel Track Path (0)
> layer type:      Rewritable Area (2)
> linear density:  0.267 µm/bit (0)
> track density:   0.74 µm/track (0)
> phys start:      196608 (0x30000) 
> phys end:        196623
> end layer 0:     0
> bca:             0
> phys size:...    16
> copyr prot type: 0
> region mgt info: 0
> cpm:             0
> cgms:            0
> last rma sector: 0
> application code:64
> physical code:   193
> last rec address:16621272
> part v./ext code:5/2
> ind wr. power:   133
> wavelength code: 13
> write str. code: 0E 88 9A 80
> Manufacturer:   'MCC 03RG20  '
> rzone size:         36
> rzone number:       1
> border number:      1
> ljrs:               0
> track mode:         4 copy: 0
> damage:             0
> reserved track:     0 blank: 0 incremental: 1 fp: 0
> data mode:          1
> lra valid:          1
> nwa valid:          0
> rzone start:        0
> next wr addr:       0
> free blocks:        0
> blocking factor:    16
> rzone size:         65264
> last recorded addr: 15
>
>     Capacity  Blklen/Sparesz.  Format-type  Type
>        65264             2048         0x00  Formatted Media
> WARNING: Phys disk size 16 differs from rzone size 0! Prerecorded disk?
> WARNING: Phys start: 196608 Phys end 196623
> WARNING: Drive returns zero media size. Using media size from ADIP.
> Mounted media class:      DVD
> Mounted media type:       DVD-R sequential recording
> Disk Is not erasable
> data type:                standard
> disk status:              incomplete/appendable
> session status:           empty
> BG format status:         none
> first track:              1
> number of sessions:       2
> first track in last sess: 2
> last track in last sess:  2
> Disk Is unrestricted
> Disk type: DVD, HD-DVD or BD
>
> Track  Sess Type   Start Addr End Addr   Size
> ==============================================
>     1     1 Data   0          65263      65264         -1
>     2     2 Blank  93952      2297887    2203936      28688
>
> Last session start address:         0
> Last session leadout start address: 65264
> Next writable address:              93952
> Remaining writable size:            2203936

The media was written before and seems to be appendable.
Is this what you intend to do?

Jörg

-- 
 EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
       js@cs.tu-berlin.de                (uni)  
       joerg.schilling@fokus.fraunhofer.de (work) Blog: http://schily.blogspot.com/
 URL:  http://cdrecord.berlios.de/private/ ftp://ftp.berlios.de/pub/schily

Re: [gentoo-user] write failed on dvd with growisofs

[Roman Dobosz]

On Mon, 16 Aug 2010 14:29:45 +0200
Joerg.Schilling@fokus.fraunhofer.de (Joerg Schilling) wrote:


> It seems that the workaround for the Pioneer firmware bug does not handle the 
> multi-border case.

So, it means, that this is hardware failure?

> > Track  Sess Type   Start Addr End Addr   Size
> > ==============================================
> >     1     1 Data   0          65263      65264         -1
> >     2     2 Blank  93952      2297887    2203936      28688
> >
> > Last session start address:         0
> > Last session leadout start address: 65264
> > Next writable address:              93952
> > Remaining writable size:            2203936
> 
> The media was written before and seems to be appendable.
> Is this what you intend to do?

Uuups :) it seems that I have tried this on already damaged DVD-R.
Here is output from blank disk:

# cdrecord -v -minfo
Cdrecord-ProDVD-ProBD-Clone 3.00 (i686-pc-linux-gnu) Copyright (C) 1995-2010 Jörg Schilling
TOC Type: 1 = CD-ROM
Linux sg driver version: 3.5.34
Using libscg version 'schily-0.9'.
SCSI buffer size: 32768
No target specified, trying to find one...
Using dev=4,0,0.
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'PIONEER '
Identifikation : 'DVD-RW  DVR-216D'
Revision       : '1.08'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD-R sequential recording
Profile: DVD+R/DL 
Profile: DVD+R 
Profile: DVD+RW 
Profile: DVD-R/DL layer jump recording 
Profile: DVD-R/DL sequential recording 
Profile: DVD-RW sequential recording 
Profile: DVD-RW restricted overwrite 
Profile: DVD-R sequential recording (current)
Profile: DVD-ROM 
Profile: CD-RW 
Profile: CD-R 
Profile: CD-ROM 
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
Driver flags   : NO-CD DVD MMC-3 SWABAUDIO BURNFREE 
Supported modes: PACKET SAO LAYER_JUMP
Drive buf size : 1605632 = 1568 KB
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
Current Secsize: 2048
Total power on  hours: 75040
book type:       DVD-R, Version 2.0x -> 2.1 (2.5)
disc size:       120mm (0)
maximum rate:    Not specified (15)
number of layers:1
track path:      Parallel Track Path (0)
layer type:      Rewritable Area (2)
linear density:  0.267 µm/bit (0)
track density:   0.74 µm/track (0)
phys start:      196608 (0x30000) 
phys end:        0
end layer 0:     0
bca:             0
phys size:...    -196607
copyr prot type: 0
region mgt info: 0
last rma sector: 0
application code:64
physical code:   193
last rec address:16621272
part v./ext code:5/2
ind wr. power:   133
wavelength code: 13
write str. code: 0E 88 9A 80
Manufacturer:   'MCC 03RG20  '
rzone size:         36
rzone number:       1
border number:      1
ljrs:               0
track mode:         4 copy: 0
damage:             0
reserved track:     0 blank: 1 incremental: 0 fp: 0
data mode:          1
lra valid:          0
nwa valid:          1
rzone start:        0
next wr addr:       0
free blocks:        2298496
blocking factor:    16
rzone size:         2298496
last recorded addr: 0

    Capacity  Blklen/Sparesz.  Format-type  Type
     4101552             2048         0x00  No Media Present or Unknown Capacity
Mounted media class:      DVD
Mounted media type:       DVD-R sequential recording
Disk Is not erasable
data type:                standard
disk status:              empty
session status:           empty
BG format status:         none
first track:              1
number of sessions:       1
first track in last sess: 1
last track in last sess:  1
Disk Is unrestricted
Disk type: DVD, HD-DVD or BD

Track  Sess Type   Start Addr End Addr   Size
==============================================
    1     1 Blank  0          2298495    2298496         -1

Next writable address:              0
Remaining writable size:            2298496


-- 
      -^-  _        coś tam w tle sobie gra, np:
   _ /O)_\//        Blindead - Phaze I: Abyss
  (_(|__(_(_) grf.  

Re: [gentoo-user] write failed on dvd with growisofs

[Roman Dobosz]

On Mon, 16 Aug 2010 20:54:02 +0200
Roman Dobosz <gryf73@op.pl> wrote:

> Vendor_info    : 'PIONEER '
> Identifikation : 'DVD-RW  DVR-216D'
> Revision       : '1.08'
                    ^^^^
Damn. So this was really Pioneer (and partially my) fault. After
firmware upgrading, cdrecord is working just fine. Unfortunately
growisofs doesn't work :/ Seems that I'll stick with cdrecord
instead.

Thanks for your help, Jörg - after all you've directed my thoughts
about firmware :)

-- 
      -^-  _        coś tam w tle sobie gra, np:
   _ /O)_\//        Blindead - Phaze III: Blood Bond
  (_(|__(_(_) grf.