root@fireball / # dmesg [ 0.000000] Linux version 3.2.11-gentoo (root@fireball) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) #2 SMP PREEMPT Mon Apr 2 20:15:29 CDT 2012 [ 0.000000] Command line: root=/dev/sda3 init=/sbin/init rd.debug rd.udev.debug nox [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000098400 (usable) [ 0.000000] BIOS-e820: 0000000000098400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfc91000 (usable) [ 0.000000] BIOS-e820: 00000000bfcf0000 - 00000000bfcf3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfcf3000 - 00000000bfd00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfd00000 - 00000000bfe00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000440000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-770T-USB3/GA-770T-USB3, BIOS F4 08/26/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x440000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000BFD00000 mask FFFFFFF00000 uncachable [ 0.000000] 3 base 0000BFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 4 base 000100000000 mask FFFF00000000 write-back [ 0.000000] 5 base 000200000000 mask FFFE00000000 write-back [ 0.000000] 6 base 000400000000 mask FFFFC0000000 write-back [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000440000000 aka 17408M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bfd00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbfc91 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f41e0] f41e0 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 8192 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfc91000 [ 0.000000] 0000000000 - 0080000000 page 1G [ 0.000000] 0080000000 - 00bfc00000 page 2M [ 0.000000] 00bfc00000 - 00bfc91000 page 4k [ 0.000000] kernel direct mapping tables up to bfc91000 @ 1fffd000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000440000000 [ 0.000000] 0100000000 - 0440000000 page 1G [ 0.000000] kernel direct mapping tables up to 440000000 @ bfc90000-bfc91000 [ 0.000000] RAMDISK: 37c79000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000f5c10 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000bfcf3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000bfcf3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000bfcf30c0 073E2 (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000bfcf0000 00040 [ 0.000000] ACPI: SSDT 00000000bfcfa580 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000bfcfae40 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000bfcfae80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 00000000bfcfa4c0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000440000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000440000000 [ 0.000000] NODE_DATA [000000043fffb000 - 000000043fffffff] [ 0.000000] [ffffea0000000000-ffffea000edfffff] PMD -> [ffff88042f600000-ffff88043d5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00440000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000098 [ 0.000000] 0: 0x00000100 -> 0x000bfc91 [ 0.000000] 0: 0x00100000 -> 0x00440000 [ 0.000000] On node 0 totalpages: 4193305 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2 pages reserved [ 0.000000] DMA zone: 3918 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767177 pages, LIFO batch:31 [ 0.000000] Normal zone: 46592 pages used for memmap [ 0.000000] Normal zone: 3361280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] Allocating PCI resources starting at bfe00000 (gap: bfe00000:20200000) [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88043fc00000 s75584 r8192 d22720 u262144 [ 0.000000] pcpu-alloc: s75584 r8192 d22720 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4132375 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda3 init=/sbin/init rd.debug rd.udev.debug nox [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ b4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000 [ 0.000000] Memory: 16388988k/17825792k available (6268k kernel code, 1052572k absent, 384232k reserved, 6642k data, 4852k init) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3218.035 MHz processor. [ 0.003002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6436.07 BogoMIPS (lpj=3218035) [ 0.003606] pid_max: default: 32768 minimum: 301 [ 0.004046] Security Framework initialized [ 0.005219] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.009786] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.012213] Mount-cache hash table entries: 256 [ 0.012628] tseg: 00bfe00000 [ 0.012630] CPU: Physical Processor ID: 0 [ 0.012928] CPU: Processor Core ID: 0 [ 0.013001] mce: CPU supports 6 MCE banks [ 0.013307] using AMD E400 aware idle routine [ 0.013637] ACPI: Core revision 20110623 [ 0.018497] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.028812] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 03 [ 0.029997] Performance Events: AMD PMU driver. [ 0.029997] ... version: 0 [ 0.029997] ... bit width: 48 [ 0.029997] ... generic registers: 4 [ 0.029999] ... value mask: 0000ffffffffffff [ 0.030303] ... max period: 00007fffffffffff [ 0.030603] ... fixed-purpose events: 0 [ 0.030998] ... event mask: 000000000000000f [ 0.031324] System has AMD C1E enabled [ 0.031634] Switch to broadcast mode on CPU0 [ 0.039088] MCE: In-kernel MCE decoding enabled. [ 0.045025] Booting Node 0, Processors #1 [ 0.045122] smpboot cpu 1: start_ip = 96000 [ 0.116996] Switch to broadcast mode on CPU1 [ 0.121025] #2 [ 0.121073] smpboot cpu 2: start_ip = 96000 [ 0.192991] Switch to broadcast mode on CPU2 [ 0.197020] #3 [ 0.197068] smpboot cpu 3: start_ip = 96000 [ 0.268984] Switch to broadcast mode on CPU3 [ 0.268993] Brought up 4 CPUs [ 0.268995] Total of 4 processors activated (25743.75 BogoMIPS). [ 0.271156] devtmpfs: initialized [ 0.271677] NET: Registered protocol family 16 [ 0.272014] kworker/u:0 used greatest stack depth: 6080 bytes left [ 0.272072] kworker/u:0 used greatest stack depth: 5680 bytes left [ 0.272732] node 0 link 0: io port [b000, ffff] [ 0.272734] TOM: 00000000c0000000 aka 3072M [ 0.272970] Fam 10h mmconf [mem 0xe0000000-0xe00fffff] [ 0.272973] node 0 link 0: mmio [a0000, bffff] [ 0.272975] node 0 link 0: mmio [c0000000, dfffffff] [ 0.272978] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.272980] node 0 link 0: mmio [e0000000, e04fffff] ==> [e0100000, e04fffff] [ 0.272983] TOM2: 0000000440000000 aka 17408M [ 0.273281] bus: [00, 04] on node 0 link 0 [ 0.273283] bus: 00 index 0 [io 0x0000-0xffff] [ 0.273284] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.273286] bus: 00 index 2 [mem 0xc0000000-0xdfffffff] [ 0.273287] bus: 00 index 3 [mem 0xe0500000-0xffffffff] [ 0.273289] bus: 00 index 4 [mem 0xe0100000-0xe04fffff] [ 0.273290] bus: 00 index 5 [mem 0x440000000-0xfcffffffff] [ 0.273300] Extended Config Space enabled on 1 nodes [ 0.273642] ACPI: bus type pci registered [ 0.274061] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.274618] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.296727] PCI: Using configuration type 1 for base access [ 0.302987] bio: create slab at 0 [ 0.303384] ACPI: Added _OSI(Module Device) [ 0.303682] ACPI: Added _OSI(Processor Device) [ 0.303965] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.304267] ACPI: Added _OSI(Processor Aggregator Device) [ 0.305315] ACPI: EC: Look up EC in DSDT [ 0.310187] ACPI: Interpreter enabled [ 0.310964] ACPI: (supports S0 S5) [ 0.311362] ACPI: Using IOAPIC for interrupt routing [ 0.354914] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.355001] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.355421] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.355957] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.356259] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.356956] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.357506] pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xfebfffff] [ 0.357966] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600 [ 0.357978] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] [ 0.358012] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604 [ 0.358043] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.358046] pci 0000:00:02.0: PME# disabled [ 0.358065] pci 0000:00:09.0: [1002:597e] type 1 class 0x000604 [ 0.358094] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.358096] pci 0000:00:09.0: PME# disabled [ 0.358108] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604 [ 0.358137] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.358139] pci 0000:00:0a.0: PME# disabled [ 0.358164] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106 [ 0.358182] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07] [ 0.358192] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03] [ 0.358201] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07] [ 0.358210] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03] [ 0.358219] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f] [ 0.358228] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] [ 0.358284] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.358297] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff] [ 0.358360] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03 [ 0.358373] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff] [ 0.358441] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.358460] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff] [ 0.358540] pci 0000:00:12.2: supports D1 D2 [ 0.358542] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.358546] pci 0000:00:12.2: PME# disabled [ 0.358566] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.358579] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff] [ 0.358642] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03 [ 0.358655] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff] [ 0.358989] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.359008] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff] [ 0.359088] pci 0000:00:13.2: supports D1 D2 [ 0.359090] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.359093] pci 0000:00:13.2: PME# disabled [ 0.359117] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.359214] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101 [ 0.359230] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.359239] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.359248] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.359257] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.359266] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f] [ 0.359323] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.359343] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit] [ 0.359408] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.359412] pci 0000:00:14.2: PME# disabled [ 0.359424] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.359498] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.359539] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.359551] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff] [ 0.359617] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 0.359633] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 0.359646] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 0.359659] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 0.359674] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 0.359722] pci 0000:01:00.0: [10de:0a20] type 0 class 0x000300 [ 0.359731] pci 0000:01:00.0: reg 10: [mem 0xfb000000-0xfbffffff] [ 0.359741] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.359751] pci 0000:01:00.0: reg 1c: [mem 0xde000000-0xdfffffff 64bit pref] [ 0.359758] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f] [ 0.359764] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 0.359818] pci 0000:01:00.1: [10de:0be2] type 0 class 0x000403 [ 0.359827] pci 0000:01:00.1: reg 10: [mem 0xfcffc000-0xfcffffff] [ 0.360974] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.361280] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.361283] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.361286] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.361325] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03 [ 0.361340] pci 0000:02:00.0: reg 10: [mem 0xfdafe000-0xfdafffff 64bit] [ 0.361412] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.361415] pci 0000:02:00.0: PME# disabled [ 0.362971] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.363277] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.363280] pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.363283] pci 0000:00:09.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.363322] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200 [ 0.363335] pci 0000:03:00.0: reg 10: [io 0xce00-0xceff] [ 0.363354] pci 0000:03:00.0: reg 18: [mem 0xfddff000-0xfddfffff 64bit pref] [ 0.363367] pci 0000:03:00.0: reg 20: [mem 0xfddf8000-0xfddfbfff 64bit pref] [ 0.363376] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.363423] pci 0000:03:00.0: supports D1 D2 [ 0.363425] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.363428] pci 0000:03:00.0: PME# disabled [ 0.364972] pci 0000:00:0a.0: PCI bridge to [bus 03-03] [ 0.365274] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff] [ 0.365277] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.365280] pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.365330] pci 0000:04:0e.0: [104c:8024] type 0 class 0x000c00 [ 0.365353] pci 0000:04:0e.0: reg 10: [mem 0xfdcff000-0xfdcff7ff] [ 0.365365] pci 0000:04:0e.0: reg 14: [mem 0xfdcf8000-0xfdcfbfff] [ 0.365457] pci 0000:04:0e.0: supports D1 D2 [ 0.365458] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.365463] pci 0000:04:0e.0: PME# disabled [ 0.365497] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode) [ 0.365804] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.365808] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.365812] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 0.365815] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.365817] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.365819] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.365821] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.365823] pci 0000:00:14.4: bridge window [mem 0xbff00000-0xfebfffff] (subtractive decode) [ 0.365838] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.366102] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.366157] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.366193] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] [ 0.366218] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.366246] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.366550] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.366954] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.379528] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.380576] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.381668] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.382752] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.383841] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.384980] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.386276] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.387279] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.388678] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.388953] vgaarb: loaded [ 0.389251] vgaarb: bridge control possible 0000:01:00.0 [ 0.390068] SCSI subsystem initialized [ 0.390458] libata version 3.00 loaded. [ 0.390523] usbcore: registered new interface driver usbfs [ 0.390857] usbcore: registered new interface driver hub [ 0.390987] usbcore: registered new device driver usb [ 0.391443] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.391951] PCI: Using ACPI for IRQ routing [ 0.400733] PCI: pci_cache_line_size set to 64 bytes [ 0.400740] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] [ 0.401021] reserve RAM buffer: 0000000000098400 - 000000000009ffff [ 0.401024] reserve RAM buffer: 00000000bfc91000 - 00000000bfffffff [ 0.401264] cfg80211: Calling CRDA to update world regulatory domain [ 0.402047] NetLabel: Initializing [ 0.402350] NetLabel: domain hash size = 128 [ 0.402650] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.402957] NetLabel: unlabeled traffic allowed by default [ 0.403262] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.403791] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.405981] Switching to clocksource hpet [ 0.413267] pnp: PnP ACPI init [ 0.413581] ACPI: bus type pnp registered [ 0.413942] pnp 00:00: [bus 00-ff] [ 0.413944] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.413946] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.413948] pnp 00:00: [io 0x0d00-0xffff window] [ 0.413950] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.413952] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.413954] pnp 00:00: [mem 0xbff00000-0xfebfffff window] [ 0.414040] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.414049] pnp 00:01: [io 0x0010-0x001f] [ 0.414051] pnp 00:01: [io 0x0022-0x003f] [ 0.414053] pnp 00:01: [io 0x0044-0x005f] [ 0.414054] pnp 00:01: [io 0x0062-0x0063] [ 0.414056] pnp 00:01: [io 0x0065-0x006f] [ 0.414057] pnp 00:01: [io 0x0074-0x007f] [ 0.414060] pnp 00:01: [io 0x0091-0x0093] [ 0.414062] pnp 00:01: [io 0x00a2-0x00bf] [ 0.414063] pnp 00:01: [io 0x00e0-0x00ef] [ 0.414065] pnp 00:01: [io 0x04d0-0x04d1] [ 0.414066] pnp 00:01: [io 0x0220-0x0225] [ 0.414068] pnp 00:01: [io 0x0290-0x0294] [ 0.414132] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.414442] system 00:01: [io 0x0220-0x0225] has been reserved [ 0.414745] system 00:01: [io 0x0290-0x0294] has been reserved [ 0.415047] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.432521] pnp 00:02: [io 0x4100-0x411f] [ 0.432524] pnp 00:02: [io 0x0228-0x022f] [ 0.432526] pnp 00:02: [io 0x040b] [ 0.432527] pnp 00:02: [io 0x04d6] [ 0.432529] pnp 00:02: [io 0x0c00-0x0c01] [ 0.432530] pnp 00:02: [io 0x0c14] [ 0.432532] pnp 00:02: [io 0x0c50-0x0c52] [ 0.432533] pnp 00:02: [io 0x0c6c-0x0c6d] [ 0.432535] pnp 00:02: [io 0x0c6f] [ 0.432536] pnp 00:02: [io 0x0cd0-0x0cd1] [ 0.432538] pnp 00:02: [io 0x0cd2-0x0cd3] [ 0.432539] pnp 00:02: [io 0x0cd4-0x0cdf] [ 0.432541] pnp 00:02: [io 0x4000-0x40fe] [ 0.432542] pnp 00:02: [io 0x4210-0x4217] [ 0.432544] pnp 00:02: [io 0x0b00-0x0b0f] [ 0.432545] pnp 00:02: [io 0x0b10-0x0b1f] [ 0.432547] pnp 00:02: [io 0x0b20-0x0b3f] [ 0.432548] pnp 00:02: [mem 0x00000000-0x00000fff window] [ 0.432550] pnp 00:02: [mem 0xfee00400-0xfee00fff window] [ 0.432555] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.433144] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref] [ 0.433715] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.434357] system 00:02: [io 0x4100-0x411f] has been reserved [ 0.434668] system 00:02: [io 0x0228-0x022f] has been reserved [ 0.434970] system 00:02: [io 0x040b] has been reserved [ 0.435275] system 00:02: [io 0x04d6] has been reserved [ 0.435582] system 00:02: [io 0x0c00-0x0c01] has been reserved [ 0.435889] system 00:02: [io 0x0c14] has been reserved [ 0.436191] system 00:02: [io 0x0c50-0x0c52] has been reserved [ 0.436503] system 00:02: [io 0x0c6c-0x0c6d] has been reserved [ 0.436802] system 00:02: [io 0x0c6f] has been reserved [ 0.437103] system 00:02: [io 0x0cd0-0x0cd1] has been reserved [ 0.437405] system 00:02: [io 0x0cd2-0x0cd3] has been reserved [ 0.437716] system 00:02: [io 0x0cd4-0x0cdf] has been reserved [ 0.438020] system 00:02: [io 0x4000-0x40fe] has been reserved [ 0.438323] system 00:02: [io 0x4210-0x4217] has been reserved [ 0.438633] system 00:02: [io 0x0b00-0x0b0f] has been reserved [ 0.438937] system 00:02: [io 0x0b10-0x0b1f] has been reserved [ 0.439238] system 00:02: [io 0x0b20-0x0b3f] has been reserved [ 0.439552] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.440107] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.440190] pnp 00:03: [dma 4] [ 0.440192] pnp 00:03: [io 0x0000-0x000f] [ 0.440193] pnp 00:03: [io 0x0080-0x0090] [ 0.440195] pnp 00:03: [io 0x0094-0x009f] [ 0.440197] pnp 00:03: [io 0x00c0-0x00df] [ 0.440274] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.440300] pnp 00:04: [irq 0 disabled] [ 0.440311] pnp 00:04: [irq 8] [ 0.440313] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.440358] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.440379] pnp 00:05: [io 0x0070-0x0073] [ 0.440433] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.440440] pnp 00:06: [io 0x0061] [ 0.440483] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.440491] pnp 00:07: [io 0x00f0-0x00ff] [ 0.440498] pnp 00:07: [irq 13] [ 0.440541] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.440661] pnp 00:08: [io 0x03f0-0x03f5] [ 0.440662] pnp 00:08: [io 0x03f7] [ 0.440669] pnp 00:08: [irq 6] [ 0.440671] pnp 00:08: [dma 2] [ 0.440727] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.440866] pnp 00:09: [io 0x03f8-0x03ff] [ 0.440873] pnp 00:09: [irq 4] [ 0.440936] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.441084] pnp 00:0a: [io 0x0378-0x037f] [ 0.441091] pnp 00:0a: [irq 7] [ 0.441153] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.441234] pnp 00:0b: [irq 12] [ 0.441282] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.441298] pnp 00:0c: [io 0x0060] [ 0.441300] pnp 00:0c: [io 0x0064] [ 0.441307] pnp 00:0c: [irq 1] [ 0.441354] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.441377] pnp 00:0d: [mem 0xe0000000-0xefffffff] [ 0.441453] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved [ 0.441757] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.441866] pnp 00:0e: [mem 0x000d4400-0x000d7fff] [ 0.441868] pnp 00:0e: [mem 0x000f0000-0x000f7fff] [ 0.441869] pnp 00:0e: [mem 0x000f8000-0x000fbfff] [ 0.441871] pnp 00:0e: [mem 0x000fc000-0x000fffff] [ 0.441873] pnp 00:0e: [mem 0xbfcf0000-0xbfcfffff] [ 0.441874] pnp 00:0e: [mem 0xffff0000-0xffffffff] [ 0.441876] pnp 00:0e: [mem 0x00000000-0x0009ffff] [ 0.441878] pnp 00:0e: [mem 0x00100000-0xbfceffff] [ 0.441879] pnp 00:0e: [mem 0xbfd00000-0xbfdfffff] [ 0.441881] pnp 00:0e: [mem 0xbfe00000-0xbfefffff] [ 0.441883] pnp 00:0e: [mem 0xfec00000-0xfec00fff] [ 0.441885] pnp 00:0e: [mem 0xfee00000-0xfee00fff] [ 0.441886] pnp 00:0e: [mem 0xfff80000-0xfffeffff] [ 0.441890] pnp 00:0e: disabling [mem 0x000d4400-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.442459] pnp 00:0e: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.443018] pnp 00:0e: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.443586] pnp 00:0e: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.444144] pnp 00:0e: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.444715] pnp 00:0e: disabling [mem 0x00100000-0xbfceffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.445378] system 00:0e: [mem 0xbfcf0000-0xbfcfffff] could not be reserved [ 0.445692] system 00:0e: [mem 0xffff0000-0xffffffff] has been reserved [ 0.445993] system 00:0e: [mem 0xbfd00000-0xbfdfffff] has been reserved [ 0.446300] system 00:0e: [mem 0xbfe00000-0xbfefffff] could not be reserved [ 0.446610] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.446917] system 00:0e: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.447220] system 00:0e: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.447532] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.447549] pnp: PnP ACPI: found 15 devices [ 0.447847] ACPI: ACPI bus type pnp unregistered [ 0.452778] PCI: max bus depth: 1 pci_try_num: 2 [ 0.452795] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0000000-0xd007ffff pref] [ 0.453352] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.453665] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.453969] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.454273] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.454836] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.455135] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.455446] pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.455749] pci 0000:00:09.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.456309] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref] [ 0.456872] pci 0000:00:0a.0: PCI bridge to [bus 03-03] [ 0.457172] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff] [ 0.457484] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.457787] pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.458348] pci 0000:00:14.4: PCI bridge to [bus 04-04] [ 0.458659] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.458964] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.459268] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 0.459845] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.460150] pci 0000:00:02.0: setting latency timer to 64 [ 0.460159] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.460470] pci 0000:00:09.0: setting latency timer to 64 [ 0.460474] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.460781] pci 0000:00:0a.0: setting latency timer to 64 [ 0.460787] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.460789] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.460791] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.460793] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.460794] pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff] [ 0.460796] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.460798] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff] [ 0.460800] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.460802] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.460804] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.460806] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.460808] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.460809] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.460811] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.460813] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] [ 0.460815] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.460817] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref] [ 0.460819] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.460820] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.460822] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.460824] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff] [ 0.460826] pci_bus 0000:04: resource 8 [mem 0xbff00000-0xfebfffff] [ 0.460888] NET: Registered protocol family 2 [ 0.461455] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.463414] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.465929] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.466490] TCP: Hash tables configured (established 524288 bind 65536) [ 0.466791] TCP reno registered [ 0.467105] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.467503] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.467992] NET: Registered protocol family 1 [ 0.468411] RPC: Registered named UNIX socket transport module. [ 0.468716] RPC: Registered udp transport module. [ 0.469017] RPC: Registered tcp transport module. [ 0.469321] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.469663] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.532478] pci 0000:00:12.0: PCI INT A disabled [ 0.532793] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.595479] pci 0000:00:12.1: PCI INT A disabled [ 0.595798] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.596147] pci 0000:00:12.2: PCI INT B disabled [ 0.596463] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.659477] pci 0000:00:13.0: PCI INT A disabled [ 0.659793] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.722477] pci 0000:00:13.1: PCI INT A disabled [ 0.722806] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.723149] pci 0000:00:13.2: PCI INT B disabled [ 0.723476] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.786476] pci 0000:00:14.5: PCI INT C disabled [ 0.786809] pci 0000:01:00.0: Boot video device [ 0.786826] pci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.787168] pci 0000:02:00.0: PCI INT A disabled [ 0.787486] PCI: CLS 64 bytes, default 64 [ 0.789791] Trying to unpack rootfs image as initramfs... [ 0.844104] Freeing initrd memory: 3548k freed [ 0.846003] PCI-DMA: Disabling AGP. [ 0.849681] PCI-DMA: aperture base @ b4000000 size 65536 KB [ 0.849985] PCI-DMA: using GART IOMMU. [ 0.850285] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.854912] IBS: LVT offset 1 assigned [ 0.855234] perf: AMD IBS detected (0x0000001f) [ 0.856168] audit: initializing netlink socket (disabled) [ 0.856490] type=2000 audit(1333523078.855:1): initialized [ 0.887090] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.887942] NTFS driver 2.1.30 [Flags: R/W]. [ 0.888390] fuse init (API version 7.17) [ 0.888794] JFS: nTxBlock = 8192, nTxLock = 65536 [ 0.890339] SGI XFS with security attributes, large block/inode numbers, no debug enabled [ 0.891381] Btrfs loaded [ 0.891690] msgmni has been set to 32145 [ 0.892301] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.892864] io scheduler noop registered [ 0.893165] io scheduler deadline registered [ 0.893497] io scheduler cfq registered (default) [ 0.893930] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.893956] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 0.894037] pcieport 0000:00:09.0: setting latency timer to 64 [ 0.894057] pcieport 0000:00:09.0: irq 41 for MSI/MSI-X [ 0.894131] pcieport 0000:00:0a.0: setting latency timer to 64 [ 0.894150] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X [ 0.894361] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.158591] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.179831] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.180520] Non-volatile memory driver v1.3 [ 1.180919] ppdev: user-space parallel port driver [ 1.181224] Linux agpgart interface v0.103 [ 1.181651] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.182210] ACPI: Power Button [PWRB] [ 1.182602] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.183155] ACPI: Power Button [PWRF] [ 1.183561] ACPI: processor limited to max C-state 1 [ 1.200227] [drm] Initialized drm 1.1.0 20060810 [ 1.200602] parport_pc 00:0a: reported by Plug and Play ACPI [ 1.200925] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] [ 1.203419] brd: module loaded [ 1.204600] loop: module loaded [ 1.205160] ahci 0000:00:11.0: version 3.0 [ 1.205180] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.205603] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.212659] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs [ 1.214169] scsi0 : ahci [ 1.214599] scsi1 : ahci [ 1.214984] scsi2 : ahci [ 1.215366] scsi3 : ahci [ 1.215761] scsi4 : ahci [ 1.216142] scsi5 : ahci [ 1.216601] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 1.217157] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 1.217725] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 1.218278] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 1.218842] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22 [ 1.219412] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22 [ 1.220019] work_for_cpu used greatest stack depth: 5600 bytes left [ 1.220631] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.220950] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.221266] r8169 0000:03:00.0: setting latency timer to 64 [ 1.221303] r8169 0000:03:00.0: irq 43 for MSI/MSI-X [ 1.221588] r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xffffc9000181e000, 1c:6f:65:4c:91:c7, XID 083000c0 IRQ 43 [ 1.222155] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.222776] PPP generic driver version 2.4.2 [ 1.223330] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.223645] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 1.223675] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.223988] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.224300] drivers/usb/core/inode.c: creating file 'devices' [ 1.224303] drivers/usb/core/inode.c: creating file '001' [ 1.224419] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.224984] ehci_hcd 0000:00:12.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6 [ 1.224988] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 1.224992] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.225581] ehci_hcd 0000:00:12.2: debug port 1 [ 1.225884] ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.225892] ehci_hcd 0000:00:12.2: MWI active [ 1.225894] ehci_hcd 0000:00:12.2: supports USB remote wakeup [ 1.225912] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 1.226217] ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.226223] ehci_hcd 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 1.231453] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.231780] usb usb1: default language 0x0409 [ 1.231785] usb usb1: udev 1, busnum 1, minor = 0 [ 1.231787] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.232091] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.232657] usb usb1: Product: EHCI Host Controller [ 1.232962] usb usb1: Manufacturer: Linux 3.2.11-gentoo ehci_hcd [ 1.233266] usb usb1: SerialNumber: 0000:00:12.2 [ 1.233679] usb usb1: usb_probe_device [ 1.233681] usb usb1: configuration #1 chosen from 1 choice [ 1.233687] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.233725] hub 1-0:1.0: usb_probe_interface [ 1.233727] hub 1-0:1.0: usb_probe_interface - got id [ 1.233728] hub 1-0:1.0: USB hub found [ 1.234027] hub 1-0:1.0: 6 ports detected [ 1.234327] hub 1-0:1.0: standalone hub [ 1.234328] hub 1-0:1.0: no power switching (usb 1.0) [ 1.234329] hub 1-0:1.0: individual port over-current protection [ 1.234331] hub 1-0:1.0: power on to power good time: 20ms [ 1.234334] hub 1-0:1.0: local power source is good [ 1.234336] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.234362] drivers/usb/core/inode.c: creating file '001' [ 1.234401] work_for_cpu used greatest stack depth: 5384 bytes left [ 1.234726] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.235045] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.235351] drivers/usb/core/inode.c: creating file '002' [ 1.235442] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.236001] ehci_hcd 0000:00:13.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6 [ 1.236005] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 1.236009] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.236592] ehci_hcd 0000:00:13.2: debug port 1 [ 1.236897] ehci_hcd 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.236905] ehci_hcd 0000:00:13.2: MWI active [ 1.236907] ehci_hcd 0000:00:13.2: supports USB remote wakeup [ 1.236924] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 [ 1.237226] ehci_hcd 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.237232] ehci_hcd 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 1.242449] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.242772] usb usb2: default language 0x0409 [ 1.242777] usb usb2: udev 1, busnum 2, minor = 128 [ 1.242779] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.243082] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.243650] usb usb2: Product: EHCI Host Controller [ 1.243952] usb usb2: Manufacturer: Linux 3.2.11-gentoo ehci_hcd [ 1.244252] usb usb2: SerialNumber: 0000:00:13.2 [ 1.244650] usb usb2: usb_probe_device [ 1.244652] usb usb2: configuration #1 chosen from 1 choice [ 1.244657] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 1.244694] hub 2-0:1.0: usb_probe_interface [ 1.244696] hub 2-0:1.0: usb_probe_interface - got id [ 1.244697] hub 2-0:1.0: USB hub found [ 1.244998] hub 2-0:1.0: 6 ports detected [ 1.245299] hub 2-0:1.0: standalone hub [ 1.245300] hub 2-0:1.0: no power switching (usb 1.0) [ 1.245302] hub 2-0:1.0: individual port over-current protection [ 1.245304] hub 2-0:1.0: power on to power good time: 20ms [ 1.245307] hub 2-0:1.0: local power source is good [ 1.245308] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 1.245334] drivers/usb/core/inode.c: creating file '001' [ 1.245426] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.245726] ohci_hcd: block sizes: ed 80 td 96 [ 1.245761] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.246078] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.246384] drivers/usb/core/inode.c: creating file '003' [ 1.246473] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.247039] ohci_hcd 0000:00:12.0: created debug files [ 1.247041] ohci_hcd 0000:00:12.0: supports USB remote wakeup [ 1.247060] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 1.301462] ohci_hcd 0000:00:12.0: OHCI controller state [ 1.301466] ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers [ 1.301470] ohci_hcd 0000:00:12.0: control 0x083 HCFS=operational CBSR=3 [ 1.301473] ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0 [ 1.301477] ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF [ 1.301480] ohci_hcd 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.301489] ohci_hcd 0000:00:12.0: hcca frame #0005 [ 1.301493] ohci_hcd 0000:00:12.0: roothub.a 02000203 POTPGT=2 NPS NDP=3(3) [ 1.301496] ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.301499] ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE [ 1.301503] ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS [ 1.301506] ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS [ 1.301509] ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS [ 1.301520] usb usb3: default language 0x0409 [ 1.301524] usb usb3: udev 1, busnum 3, minor = 256 [ 1.301526] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.301827] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.302384] usb usb3: Product: OHCI Host Controller [ 1.302690] usb usb3: Manufacturer: Linux 3.2.11-gentoo ohci_hcd [ 1.302991] usb usb3: SerialNumber: 0000:00:12.0 [ 1.303417] usb usb3: usb_probe_device [ 1.303419] usb usb3: configuration #1 chosen from 1 choice [ 1.303424] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 1.303460] hub 3-0:1.0: usb_probe_interface [ 1.303462] hub 3-0:1.0: usb_probe_interface - got id [ 1.303463] hub 3-0:1.0: USB hub found [ 1.303764] hub 3-0:1.0: 3 ports detected [ 1.304063] hub 3-0:1.0: standalone hub [ 1.304065] hub 3-0:1.0: no power switching (usb 1.0) [ 1.304066] hub 3-0:1.0: global over-current protection [ 1.304067] hub 3-0:1.0: power on to power good time: 4ms [ 1.304072] hub 3-0:1.0: local power source is good [ 1.304073] hub 3-0:1.0: no over-current condition exists [ 1.304075] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 1.304086] drivers/usb/core/inode.c: creating file '001' [ 1.304144] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.304466] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.304773] drivers/usb/core/inode.c: creating file '004' [ 1.304847] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.305424] ohci_hcd 0000:00:12.1: created debug files [ 1.305425] ohci_hcd 0000:00:12.1: supports USB remote wakeup [ 1.305430] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 1.333467] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 1.344466] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 1.360459] ohci_hcd 0000:00:12.1: OHCI controller state [ 1.360463] ohci_hcd 0000:00:12.1: OHCI 1.0, NO legacy support registers [ 1.360467] ohci_hcd 0000:00:12.1: control 0x083 HCFS=operational CBSR=3 [ 1.360470] ohci_hcd 0000:00:12.1: cmdstatus 0x00000 SOC=0 [ 1.360473] ohci_hcd 0000:00:12.1: intrstatus 0x00000004 SF [ 1.360477] ohci_hcd 0000:00:12.1: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.360486] ohci_hcd 0000:00:12.1: hcca frame #0005 [ 1.360489] ohci_hcd 0000:00:12.1: roothub.a 02000203 POTPGT=2 NPS NDP=3(3) [ 1.360492] ohci_hcd 0000:00:12.1: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.360495] ohci_hcd 0000:00:12.1: roothub.status 00008000 DRWE [ 1.360499] ohci_hcd 0000:00:12.1: roothub.portstatus [0] 0x00000100 PPS [ 1.360502] ohci_hcd 0000:00:12.1: roothub.portstatus [1] 0x00000100 PPS [ 1.360505] ohci_hcd 0000:00:12.1: roothub.portstatus [2] 0x00000100 PPS [ 1.360514] usb usb4: default language 0x0409 [ 1.360518] usb usb4: udev 1, busnum 4, minor = 384 [ 1.360520] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.360822] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.361378] usb usb4: Product: OHCI Host Controller [ 1.361687] usb usb4: Manufacturer: Linux 3.2.11-gentoo ohci_hcd [ 1.361988] usb usb4: SerialNumber: 0000:00:12.1 [ 1.362416] usb usb4: usb_probe_device [ 1.362418] usb usb4: configuration #1 chosen from 1 choice [ 1.362423] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 1.362459] hub 4-0:1.0: usb_probe_interface [ 1.362461] hub 4-0:1.0: usb_probe_interface - got id [ 1.362462] hub 4-0:1.0: USB hub found [ 1.362766] hub 4-0:1.0: 3 ports detected [ 1.363064] hub 4-0:1.0: standalone hub [ 1.363065] hub 4-0:1.0: no power switching (usb 1.0) [ 1.363067] hub 4-0:1.0: global over-current protection [ 1.363068] hub 4-0:1.0: power on to power good time: 4ms [ 1.363073] hub 4-0:1.0: local power source is good [ 1.363074] hub 4-0:1.0: no over-current condition exists [ 1.363076] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 1.363087] drivers/usb/core/inode.c: creating file '001' [ 1.363146] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.363471] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.363771] drivers/usb/core/inode.c: creating file '005' [ 1.363847] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.364423] ohci_hcd 0000:00:13.0: created debug files [ 1.364424] ohci_hcd 0000:00:13.0: supports USB remote wakeup [ 1.364443] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 1.403460] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000 [ 1.419459] ohci_hcd 0000:00:13.0: OHCI controller state [ 1.419463] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers [ 1.419466] ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3 [ 1.419470] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0 [ 1.419473] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF [ 1.419476] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.419485] ohci_hcd 0000:00:13.0: hcca frame #0005 [ 1.419488] ohci_hcd 0000:00:13.0: roothub.a 02000203 POTPGT=2 NPS NDP=3(3) [ 1.419492] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.419495] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE [ 1.419498] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS [ 1.419501] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS [ 1.419505] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS [ 1.419515] usb usb5: default language 0x0409 [ 1.419520] usb usb5: udev 1, busnum 5, minor = 512 [ 1.419522] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.419827] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.420381] usb usb5: Product: OHCI Host Controller [ 1.420686] usb usb5: Manufacturer: Linux 3.2.11-gentoo ohci_hcd [ 1.420989] usb usb5: SerialNumber: 0000:00:13.0 [ 1.421412] usb usb5: usb_probe_device [ 1.421414] usb usb5: configuration #1 chosen from 1 choice [ 1.421418] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 1.421454] hub 5-0:1.0: usb_probe_interface [ 1.421456] hub 5-0:1.0: usb_probe_interface - got id [ 1.421457] hub 5-0:1.0: USB hub found [ 1.421767] hub 5-0:1.0: 3 ports detected [ 1.422065] hub 5-0:1.0: standalone hub [ 1.422066] hub 5-0:1.0: no power switching (usb 1.0) [ 1.422068] hub 5-0:1.0: global over-current protection [ 1.422069] hub 5-0:1.0: power on to power good time: 4ms [ 1.422074] hub 5-0:1.0: local power source is good [ 1.422075] hub 5-0:1.0: no over-current condition exists [ 1.422077] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 1.422087] drivers/usb/core/inode.c: creating file '001' [ 1.422147] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.422474] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.422776] drivers/usb/core/inode.c: creating file '006' [ 1.422854] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.423433] ohci_hcd 0000:00:13.1: created debug files [ 1.423434] ohci_hcd 0000:00:13.1: supports USB remote wakeup [ 1.423439] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 1.462460] hub 4-0:1.0: state 7 ports 3 chg 0000 evt 0000 [ 1.478458] ohci_hcd 0000:00:13.1: OHCI controller state [ 1.478462] ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers [ 1.478466] ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3 [ 1.478469] ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0 [ 1.478472] ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF [ 1.478475] ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.478484] ohci_hcd 0000:00:13.1: hcca frame #0005 [ 1.478488] ohci_hcd 0000:00:13.1: roothub.a 02000203 POTPGT=2 NPS NDP=3(3) [ 1.478491] ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.478494] ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE [ 1.478497] ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS [ 1.478501] ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS [ 1.478504] ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00000100 PPS [ 1.478512] usb usb6: default language 0x0409 [ 1.478517] usb usb6: udev 1, busnum 6, minor = 640 [ 1.478519] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.478825] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.479377] usb usb6: Product: OHCI Host Controller [ 1.479683] usb usb6: Manufacturer: Linux 3.2.11-gentoo ohci_hcd [ 1.479986] usb usb6: SerialNumber: 0000:00:13.1 [ 1.480410] usb usb6: usb_probe_device [ 1.480411] usb usb6: configuration #1 chosen from 1 choice [ 1.480416] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 1.480454] hub 6-0:1.0: usb_probe_interface [ 1.480455] hub 6-0:1.0: usb_probe_interface - got id [ 1.480457] hub 6-0:1.0: USB hub found [ 1.480762] hub 6-0:1.0: 3 ports detected [ 1.481064] hub 6-0:1.0: standalone hub [ 1.481066] hub 6-0:1.0: no power switching (usb 1.0) [ 1.481067] hub 6-0:1.0: global over-current protection [ 1.481069] hub 6-0:1.0: power on to power good time: 4ms [ 1.481073] hub 6-0:1.0: local power source is good [ 1.481074] hub 6-0:1.0: no over-current condition exists [ 1.481076] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 1.481087] drivers/usb/core/inode.c: creating file '001' [ 1.481146] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.481471] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.481777] drivers/usb/core/inode.c: creating file '007' [ 1.481855] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.482433] ohci_hcd 0000:00:14.5: created debug files [ 1.482435] ohci_hcd 0000:00:14.5: supports USB remote wakeup [ 1.482439] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 [ 1.521459] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0000 [ 1.525479] ata6: SATA link down (SStatus 0 SControl 300) [ 1.525809] ata5: SATA link down (SStatus 0 SControl 300) [ 1.537457] ohci_hcd 0000:00:14.5: OHCI controller state [ 1.537461] ohci_hcd 0000:00:14.5: OHCI 1.0, NO legacy support registers [ 1.537465] ohci_hcd 0000:00:14.5: control 0x083 HCFS=operational CBSR=3 [ 1.537468] ohci_hcd 0000:00:14.5: cmdstatus 0x00000 SOC=0 [ 1.537471] ohci_hcd 0000:00:14.5: intrstatus 0x00000004 SF [ 1.537474] ohci_hcd 0000:00:14.5: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.537483] ohci_hcd 0000:00:14.5: hcca frame #0005 [ 1.537486] ohci_hcd 0000:00:14.5: roothub.a 02000202 POTPGT=2 NPS NDP=2(2) [ 1.537490] ohci_hcd 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.537493] ohci_hcd 0000:00:14.5: roothub.status 00008000 DRWE [ 1.537496] ohci_hcd 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS [ 1.537499] ohci_hcd 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS [ 1.537508] usb usb7: default language 0x0409 [ 1.537513] usb usb7: udev 1, busnum 7, minor = 768 [ 1.537514] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.537821] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.538382] usb usb7: Product: OHCI Host Controller [ 1.538691] usb usb7: Manufacturer: Linux 3.2.11-gentoo ohci_hcd [ 1.538991] usb usb7: SerialNumber: 0000:00:14.5 [ 1.539414] usb usb7: usb_probe_device [ 1.539416] usb usb7: configuration #1 chosen from 1 choice [ 1.539420] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 1.539457] hub 7-0:1.0: usb_probe_interface [ 1.539459] hub 7-0:1.0: usb_probe_interface - got id [ 1.539460] hub 7-0:1.0: USB hub found [ 1.539763] hub 7-0:1.0: 2 ports detected [ 1.540065] hub 7-0:1.0: standalone hub [ 1.540066] hub 7-0:1.0: no power switching (usb 1.0) [ 1.540068] hub 7-0:1.0: global over-current protection [ 1.540069] hub 7-0:1.0: power on to power good time: 4ms [ 1.540073] hub 7-0:1.0: local power source is good [ 1.540075] hub 7-0:1.0: no over-current condition exists [ 1.540077] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 1.540087] drivers/usb/core/inode.c: creating file '001' [ 1.540124] work_for_cpu used greatest stack depth: 5136 bytes left [ 1.540436] uhci_hcd: USB Universal Host Controller Interface driver [ 1.540832] usbcore: registered new interface driver cdc_acm [ 1.541131] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.541745] usbcore: registered new interface driver usblp [ 1.542079] usbcore: registered new interface driver uas [ 1.542382] Initializing USB Mass Storage driver... [ 1.542738] usbcore: registered new interface driver usb-storage [ 1.543038] USB Mass Storage support registered. [ 1.543438] usbcore: registered new interface driver libusual [ 1.543816] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.544811] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.545122] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.545614] mousedev: PS/2 mouse device common for all mice [ 1.546155] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 1.546551] rtc_cmos 00:05: RTC can wake from S4 [ 1.546974] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.547303] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.547676] i2c /dev entries driver [ 1.548044] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f] [ 1.548619] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.549279] it87: Found IT8720F chip at 0x228, revision 8 [ 1.549616] it87: Routing internal VCCH to in7 [ 1.549930] it87: Beeping is supported [ 1.550668] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.551261] cpuidle: using governor ladder [ 1.551569] EFI Variables Facility v0.08 2004-May-17 [ 1.552589] usbcore: registered new interface driver usbhid [ 1.552891] usbhid: USB HID core driver [ 1.553542] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.565161] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.570263] snd_hda_intel 0000:01:00.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.570831] hda_intel: Disabling MSI [ 1.571148] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 1.580458] hub 6-0:1.0: state 7 ports 3 chg 0000 evt 0000 [ 1.639456] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.680454] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.680781] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.681104] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.681822] ata1.00: ATA-8: WDC WD1600AAJS-00YZCA0, 01.03B01, max UDMA/133 [ 1.682135] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.682628] ata3.00: ATA-8: WDC WD2502ABYS-18B7A0, 02.03B04, max UDMA/133 [ 1.682932] ata3.00: 488281250 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.689732] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.690122] ata1.00: configured for UDMA/133 [ 1.690499] ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01117, max UDMA7 [ 1.690520] scsi 0:0:0:0: Direct-Access ATA WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5 [ 1.690710] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.690751] sd 0:0:0:0: [sda] Write Protect is off [ 1.690753] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.690766] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.692797] ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.693121] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100 [ 1.693593] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.693624] ata3.00: configured for UDMA/133 [ 1.696797] ata2.00: configured for UDMA/100 [ 1.699804] ata4.00: configured for UDMA/133 [ 1.705339] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN03 PQ: 0 ANSI: 5 [ 1.714707] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.715266] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.715719] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.715813] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.716211] scsi 2:0:0:0: Direct-Access ATA WDC WD2502ABYS-1 02.0 PQ: 0 ANSI: 5 [ 1.716927] sd 2:0:0:0: [sdb] 488281250 512-byte logical blocks: (250 GB/232 GiB) [ 1.717555] sd 2:0:0:0: [sdb] Write Protect is off [ 1.717637] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.717747] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5 [ 1.717912] sd 3:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.717942] sd 3:0:0:0: [sdc] Write Protect is off [ 1.717944] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.717957] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.717959] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.720497] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.720511] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.731348] sdc: sdc1 [ 1.731916] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.747639] sdb: sdb1 sdb2 sdb3 < sdb5 > [ 1.748305] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.755112] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 > [ 1.756004] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.858438] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 1.867437] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 1.876437] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 1.885438] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 1.889092] ALSA device list: [ 1.889407] #0: HDA ATI SB at 0xfe024000 irq 16 [ 1.889711] #1: HDA NVidia at 0xfcffc000 irq 18 [ 1.890056] Netfilter messages via NETLINK v0.30. [ 1.890375] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.890799] ctnetlink v0.93: registering with nfnetlink. [ 1.891489] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.891820] TCP cubic registered [ 1.892122] Initializing XFRM netlink socket [ 1.892507] NET: Registered protocol family 10 [ 1.893492] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.893839] IPv6 over IPv4 tunneling driver [ 1.894692] NET: Registered protocol family 17 [ 1.895000] Registering the dns_resolver key type [ 1.895324] registered taskstats version 1 [ 1.895920] hd: no drives specified - use hd=cyl,head,sectors on kernel command line [ 1.896503] console [netcon0] enabled [ 1.896804] netconsole: network logging started [ 1.901689] Freeing unused kernel memory: 4852k freed [ 1.903109] Write protecting the kernel read-only data: 12288k [ 1.908771] Freeing unused kernel memory: 1904k freed [ 1.914226] Freeing unused kernel memory: 1704k freed [ 1.928444] Refined TSC clocksource calibration: 3217.956 MHz. [ 1.928750] Switching to clocksource tsc [ 1.939368] REISERFS (device sda3): found reiserfs format "3.6" with standard journal [ 1.939940] REISERFS (device sda3): using ordered data mode [ 1.940241] reiserfs: using flush barriers [ 1.949000] REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 1.950213] REISERFS (device sda3): checking transaction log (sda3) [ 2.015547] REISERFS (device sda3): Using r5 hash to sort names [ 2.291098] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 3.089452] cat used greatest stack depth: 4088 bytes left [ 3.263162] init-early.sh used greatest stack depth: 3696 bytes left [ 4.183837] udevd[1060]: starting version 171 [ 5.550900] nvidia: module license 'NVIDIA' taints kernel. [ 5.550903] Disabling lock debugging due to kernel taint [ 5.674535] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 5.674543] nvidia 0000:01:00.0: setting latency timer to 64 [ 5.674547] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 5.674674] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.20 Mon Feb 6 21:07:30 PST 2012 [ 7.257145] reiserfs: enabling write barrier flush mode [ 7.460654] kjournald starting. Commit interval 5 seconds [ 7.460848] EXT3-fs (sda8): using internal journal [ 7.460853] EXT3-fs (sda8): mounted filesystem with writeback data mode [ 7.489463] kjournald starting. Commit interval 5 seconds [ 7.489638] EXT3-fs (sda6): using internal journal [ 7.489641] EXT3-fs (sda6): mounted filesystem with writeback data mode [ 7.490185] REISERFS (device sda7): found reiserfs format "3.6" with standard journal [ 7.490192] REISERFS (device sda7): using ordered data mode [ 7.490194] reiserfs: using flush barriers [ 7.490356] REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 7.490750] REISERFS (device sda7): checking transaction log (sda7) [ 7.586209] REISERFS (device sda7): Using r5 hash to sort names [ 8.906686] r8169 0000:03:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168d-2.fw (-2) [ 8.913975] r8169 0000:03:00.0: eth0: link down [ 8.913983] r8169 0000:03:00.0: eth0: link down [ 8.916376] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.055819] Adding 979960k swap on /dev/sda2. Priority:-1 extents:1 across:979960k [ 9.544469] chronyd used greatest stack depth: 3576 bytes left [ 10.621519] r8169 0000:03:00.0: eth0: link up [ 10.623904] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 21.019915] eth0: no IPv6 routers present [ 215.260111] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0008 [ 215.260122] ehci_hcd 0000:00:13.2: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT [ 215.260130] hub 2-0:1.0: port 3, status 0501, change 0001, 480 Mb/s [ 215.368185] hub 2-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501 [ 215.420241] ehci_hcd 0000:00:13.2: port 3 full speed --> companion [ 215.420246] ehci_hcd 0000:00:13.2: GetStatus port:3 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 215.420278] hub 2-0:1.0: port 3 not reset yet, waiting 50ms [ 215.472298] ehci_hcd 0000:00:13.2: GetStatus port:3 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 215.472319] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0008 [ 215.472325] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00010101 CSC PPS CCS [ 215.472329] hub 5-0:1.0: port 3, status 0101, change 0001, 12 Mb/s [ 215.580416] hub 5-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x101 [ 215.644486] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS [ 215.696539] usb 5-3: new full-speed USB device number 2 using ohci_hcd [ 215.762613] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS [ 215.830692] usb 5-3: ep0 maxpacket = 8 [ 215.840717] usb 5-3: skipped 4 descriptors after interface [ 215.848722] usb 5-3: skipped 4 descriptors after interface [ 215.851723] usb 5-3: default language 0x0409 [ 215.859732] usb 5-3: udev 2, busnum 5, minor = 513 [ 215.859735] usb 5-3: New USB device found, idVendor=22b8, idProduct=4902 [ 215.859737] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 215.859740] usb 5-3: Product: Motorola Phone (V3i) [ 215.859741] usb 5-3: Manufacturer: Motorola Inc. [ 215.859814] usb 5-3: usb_probe_device [ 215.859816] usb 5-3: configuration #1 chosen from 2 choices [ 215.865736] usb 5-3: adding 5-3:1.0 (config #1, interface 0) [ 215.869753] cdc_acm 5-3:1.0: usb_probe_interface [ 215.869757] cdc_acm 5-3:1.0: usb_probe_interface - got id [ 215.869784] cdc_acm 5-3:1.0: ttyACM0: USB ACM device [ 215.876782] usb 5-3: adding 5-3:1.1 (config #1, interface 1) [ 215.880764] drivers/usb/core/inode.c: creating file '002' [ 215.880781] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0008 [ 215.880788] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0008 [ 322.607543] run-crons used greatest stack depth: 3512 bytes left [ 626.108533] knotify4 used greatest stack depth: 3000 bytes left root@fireball / #