Re: [gentoo-user] TUSB3410 on 3.0.6 kernel

[Dale <rdalek1967@gmail.com>]

Érico Porto wrote:
> so now the module is loadable through modprobe, it all makes with no 
> errors.
>
> It's probably out of this topic, but shouldn't I see a ttyUSB or 
> something like that in my /dev/ ?
>
> I tried using
>
> modprobe ti_usb_3410_5052 product=0451 vendor f432
>
> I just wanted to read the virtual usb serial out of a Texas launchpad 
> board. This board uses the TUSB3410 chip. I'm asking about this in the 
> texas forums too, just was surprised to see so many fast answers.
>
> Érico V. Porto
>

I would think udev would create the device when it is connected or you 
boot up, whichever comes first.  I have no knowledge on the device you 
are using but do on the kernel part.  If you load the module, udev 
should then see the device and create the file in /dev.  That's the 
theory anyway.  You can use udevadm monitor to see if udev sees it as it 
should.  You can also tail -f /var/log/messages to see what happens when 
you connect it or look in dmesg.  One or more of those should tell you 
what is not working.

Dale

:-)  :-)