From: Dale <rdalek1967@gmail.com>
To: gentoo-user@lists.gentoo.org
Subject: [gentoo-user] Does this drive need a funeral?
Date: Tue, 01 Nov 2011 13:58:14 -0500 [thread overview]
Message-ID: <4EB04146.8030207@gmail.com> (raw)
Hi,
For the first time in my life, I think I have a drive failing on me.
Here is the info:
root@smoker / # smartctl -a /dev/sdc
smartctl 5.40 2010-10-16 r3189 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar family
Device Model: WDC WD800BB-00DKA0
Serial Number: WD-WCAHL2497094
Firmware Version: 77.07W77
User Capacity: 80,026,361,856 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Nov 1 13:52:49 2011 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting
command from host.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 73) The previous self-test completed
having
a test element that failed and
the test
element that failed is not known.
Total time to complete Offline
data collection: (2478) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 38) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 018 001 051 Pre-fail
Always FAILING_NOW 1904
3 Spin_Up_Time 0x0007 087 084 021 Pre-fail
Always - 2166
4 Start_Stop_Count 0x0032 099 099 040 Old_age
Always - 1288
5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail
Always - 1
7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail
Always - 0
9 Power_On_Hours 0x0032 023 023 000 Old_age
Always - 56466
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail
Always - 0
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age
Always - 1039
194 Temperature_Celsius 0x0022 110 253 000 Old_age
Always - 33
196 Reallocated_Event_Count 0x0032 199 199 000 Old_age
Always - 1
197 Current_Pending_Sector 0x0012 199 199 000 Old_age
Always - 17
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age
Always - 10
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age
Always - 1155
200 Multi_Zone_Error_Rate 0x0009 195 085 051 Pre-fail
Offline - 191
SMART Error Log Version: 1
ATA Error Count: 4449 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 4449 occurred at disk power-on lifetime: 759 hours (31 days + 15
hours)
When the command that caused the error occurred, the device was doing
SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a7 73 a8 f4
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
01 00 c8 00 00 08 00 00 01:47:13.550 [RESERVED]
00 00 00 00 00 00 00 00 01:47:13.550 NOP [Abort queued commands]
01 00 ef 00 00 45 00 00 01:47:13.550 [RESERVED]
00 00 00 00 00 00 00 00 01:47:13.550 NOP [Abort queued commands]
01 00 c8 00 00 08 00 00 01:47:13.550 [RESERVED]
Error 4448 occurred at disk power-on lifetime: 759 hours (31 days + 15
hours)
When the command that caused the error occurred, the device was doing
SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a7 73 a8 f4
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
01 00 c8 00 00 08 00 00 01:47:11.550 [RESERVED]
00 00 00 00 00 00 00 00 01:47:11.550 NOP [Abort queued commands]
01 00 ef 00 00 45 00 00 01:47:11.550 [RESERVED]
01 00 27 00 00 00 00 00 01:47:11.550 [RESERVED]
04 00 a8 00 00 a7 73 00 01:47:11.550 [RESERVED]
Error 4447 occurred at disk power-on lifetime: 759 hours (31 days + 15
hours)
When the command that caused the error occurred, the device was doing
SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a7 73 a8 f4
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
01 00 c8 00 00 08 00 00 01:47:09.500 [RESERVED]
00 00 00 00 00 00 00 00 01:47:09.500 NOP [Abort queued commands]
01 00 ef 00 00 45 00 00 01:47:09.500 [RESERVED]
00 00 00 00 00 00 00 00 01:47:09.500 NOP [Abort queued commands]
01 00 c8 00 00 08 00 00 01:47:09.500 [RESERVED]
Error 4446 occurred at disk power-on lifetime: 759 hours (31 days + 15
hours)
When the command that caused the error occurred, the device was doing
SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a7 73 a8 f4
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
01 00 c8 00 00 08 00 00 01:47:07.550 [RESERVED]
01 00 ec 00 00 00 00 00 01:47:07.550 [RESERVED]
00 00 00 00 00 00 00 00 01:47:07.550 NOP [Abort queued commands]
01 00 ec 00 00 00 00 00 01:47:07.550 [RESERVED]
00 00 00 00 00 00 00 00 01:47:07.550 NOP [Abort queued commands]
Error 4445 occurred at disk power-on lifetime: 759 hours (31 days + 15
hours)
When the command that caused the error occurred, the device was doing
SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a7 73 a8 f4
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
01 00 c8 00 00 08 00 00 01:47:05.600 [RESERVED]
00 00 00 00 00 00 00 00 01:47:05.600 NOP [Abort queued commands]
01 00 ef 00 00 45 00 00 01:47:05.600 [RESERVED]
00 00 00 00 00 00 00 00 01:47:05.600 NOP [Abort queued commands]
01 00 c8 00 00 08 00 00 01:47:05.600 [RESERVED]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: unknown failure 90%
760 4294705476
# 2 Extended offline Completed: unknown failure 90%
759 4294705476
# 3 Extended offline Completed: unknown failure 90%
759 4294705476
# 4 Extended offline Completed without error 00%
1038 -
# 5 Short offline Completed without error 00%
1037 -
# 6 Extended offline Completed without error 00%
1075 -
# 7 Extended offline Completed without error 00%
305 -
# 8 Extended offline Completed without error 00%
660 -
# 9 Extended offline Completed without error 00%
213 -
#10 Extended offline Completed without error 00%
687 -
#11 Extended offline Completed without error 00%
686 -
#12 Extended offline Completed without error 00%
629 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@smoker / #
What you folks think? Can I fix it somehow? I got a good shovel handy
just in case.
Dale
:-) :-)
next reply other threads:[~2011-11-01 18:59 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-01 18:58 Dale [this message]
2011-11-01 19:07 ` [gentoo-user] Does this drive need a funeral? Mark Knecht
2011-11-01 19:47 ` Dale
2011-11-01 19:58 ` Michael Mol
2011-11-01 20:04 ` Joost Roeleveld
2011-11-02 1:17 ` Dale
2011-11-02 1:35 ` Dale
2011-11-02 14:02 ` Michael Mol
2011-11-02 14:07 ` Neil Bothwick
2011-11-02 15:29 ` Dale
2011-11-02 14:15 ` Lorenzo Bandieri
2011-11-02 14:18 ` Lorenzo Bandieri
2011-11-02 14:52 ` Pandu Poluan
2011-11-02 15:33 ` Dale
2011-11-02 16:51 ` James Broadhead
2011-11-02 17:16 ` Dale
2011-11-02 21:01 ` Mick
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EB04146.8030207@gmail.com \
--to=rdalek1967@gmail.com \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox