From: dhk <dhkuhl@optonline.net>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] ALSA - Still No Sound
Date: Mon, 14 Feb 2011 06:43:22 -0500 [thread overview]
Message-ID: <4D59155A.7000301@optonline.net> (raw)
In-Reply-To: <1297648866.31454.6.camel@troll>
On 02/13/2011 09:01 PM, Bill Kenworthy wrote:
> what does "lsmod" say?
>
> This is on a jetway MB with an onboard nvidia chipset so not quite the
> same as yours (only sound and the nvidia module are modularised) - in
> particular make sure that you are building the "Intel HD Audio" codecs -
> it isnt immediately obvious that its required.
>
> BillK
>
>
> myth3 linux # lsmod
> Module Size Used by
> snd_pcm_oss 37091 0
> snd_mixer_oss 14409 1 snd_pcm_oss
> snd_seq_dummy 1335 0
> snd_seq_oss 26582 0
> snd_seq_midi_event 5148 1 snd_seq_oss
> snd_seq 47261 5
> snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
> snd_usb_audio 76036 0
> snd_usb_lib 16911 1 snd_usb_audio
> snd_rawmidi 17403 1 snd_usb_lib
> snd_seq_device 4917 4
> snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
> snd_hda_codec_nvhdmi 12443 1
> snd_hda_codec_realtek 261601 1
> easycap 1258666 0
> nvidia 10078248 36
> snd_hda_intel 20392 4
> snd_hda_codec 67766 3
> snd_hda_codec_nvhdmi,snd_hda_codec_realtek,snd_hda_intel
> lirc_wb677 22727 1
> snd_hwdep 5724 2 snd_usb_audio,snd_hda_codec
> lirc_dev 10091 3 lirc_wb677
> snd_pcm 68302 5
> snd_pcm_oss,snd_usb_audio,easycap,snd_hda_intel,snd_hda_codec
> snd_timer 17708 2 snd_seq,snd_pcm
> snd 49975 23
> snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_usb_audio,snd_usb_lib,snd_rawmidi,snd_seq_device,snd_hda_codec_realtek,easycap,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
> soundcore 5135 1 snd
> snd_page_alloc 6641 2 snd_hda_intel,snd_pcm
> myth3 linux #
>
> On Sun, 2011-02-13 at 18:19 -0500, dhk wrote:
>> I still can't get sound to work. Can someone tell me what's wrong? In
>> addition to my earlier thread below I have INPUT_DEVICES="evdev" and
>> ALSA_CARDS="AC97" in my make.conf.
>>
>> The following that someone suggented does nothing.
>>> modprobe snd-intel8x0; modprobe snd-pcm-oss; modprobe snd-mixer-oss;
>> modprobe snd-seq-oss
>>
>> I've also tried a second sound card and alternate set of speakers. Also
>> nothing is muted or turned down.
>>
>> According to http://kmuto.jp/debian/hcl/ my card works.
>> 10de00ea Yes nVidia Corporation nForce3 250Gb AC'97 Audio Controller
>> snd-intel8x0 v2.6.25-
>>
>>
>> On 01/22/2011 08:16 PM, dhk wrote:
>>> Can someone tell me why I don't have sound? I've followed the
>>> instructions at http://www.gentoo.org/doc/en/alsa-guide.xml and
>>> everything seems to be working, but there's still no sound. I've also
>>> swapped out the speakers, made sure they were powered on, and the volume
>>> turned up. Also I'm in the audio group and the channels are unmuted
>>> with the volume at 75%.
>>>
>>> One thing I did notice is that after running alsaconf there aren't any
>>> modules in /etc/modules.d/, in fact the directory doesn't even exist.
>>> Now if there aren't any modules to load that's fine, but since I don't
>>> hear anything I'm not so sure.
>>>
>>> Below is what's on my ~amd64 system.
>>>
>>> Thanks.
>>>
>>> # rc-update show | grep -i alsa
>>> alsasound | boot
>>>
>>> # /etc/init.d/alsasound restart
>>> * WARNING: you are stopping a boot service.
>>> * Storing ALSA Mixer Levels ...
>>> [ ok ]
>>> * Loading ALSA modules ...
>>> * Loading: snd-card-0 ...
>>> [ ok ]
>>> * Restoring Mixer Levels ...
>>> [ ok ]
>>>
>>> # lspci -v | grep -i audio
>>> 00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb
>>> AC'97 Audio Controller (rev a1)
>>>
>>> # cat /etc/kernels/kernel-config-x86_64-2.6.36-gentoo-r5 | egrep -i
>>> 'sound|ac97|alsa'
>>> CONFIG_SOUND=m
>>> CONFIG_SOUND_OSS_CORE=y
>>> CONFIG_SOUND_OSS_CORE_PRECLAIM=y
>>> CONFIG_SND_AC97_CODEC=m
>>> # CONFIG_SND_AC97_POWER_SAVE is not set
>>> # CONFIG_SOUND_PRIME is not set
>>> CONFIG_AC97_BUS=m
>>> CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
>>> # CONFIG_CRYPTO_SALSA20 is not set
>>> CONFIG_CRYPTO_SALSA20_X86_64=m
>>>
>>> # cat /proc/asound/cards
>>> 0 [CK8S ]: NFORCE - NVidia CK8S
>>> NVidia CK8S with ALC850 at irq 20
>>> 1 [UART ]: MPU-401 UART - MPU-401 UART
>>> MPU-401 UART at 0x300, irq 5
>>>
>>> # cat /proc/asound/version
>>> Advanced Linux Sound Architecture Driver Version 1.0.23.
>>>
>>> # cat /proc/asound/oss/sndstat
>>> Sound Driver:3.8.1a-980706 (ALSA v1.0.23 emulation code)
>>> Kernel: Linux jenny 2.6.36-gentoo-r5 #1 SMP Wed Jan 12 16:53:04 EST 2011
>>> x86_64
>>> Config options: 0
>>>
>>> Installed drivers:
>>> Type 10: ALSA emulation
>>>
>>> Card config:
>>> NVidia CK8S with ALC850 at irq 20
>>> MPU-401 UART at 0x300, irq 5
>>>
>>> Audio devices:
>>> 0: NVidia CK8S (DUPLEX)
>>>
>>> Synth devices: NOT ENABLED IN CONFIG
>>>
>>> Midi devices:
>>> 1: MPU-401 UART MIDI
>>>
>>> Timers:
>>> 31: system timer
>>>
>>> Mixers:
>>> 0: Realtek ALC850 rev 0
>>> 1: mixer10
>>
>> Thanks again,
>>
>> dhk
>>
>
>
>
>
Below is the full lsmod. What are the "Intel HD Audio" codecs? I don't
remember doing anything explicitly for them. How do I check them? Thanks.
# lsmod
Module Size Used by
ipv6 206158 10
snd_seq_midi 3968 0
snd_pcm_oss 29261 0
snd_mixer_oss 12003 1 snd_pcm_oss
snd_seq_oss 22204 0
snd_seq_midi_event 4500 2 snd_seq_midi,snd_seq_oss
snd_seq 39341 5 snd_seq_midi,snd_seq_oss,snd_seq_midi_event
nvidia 8014619 24
snd_intel8x0 23674 0
snd_ac97_codec 97723 1 snd_intel8x0
snd_mpu401 4816 0
ac97_bus 1038 1 snd_ac97_codec
snd_mpu401_uart 4819 1 snd_mpu401
snd_pcm 54108 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_rawmidi 14820 2 snd_seq_midi,snd_mpu401_uart
snd_timer 15181 2 snd_seq,snd_pcm
i2c_core 14583 1 nvidia
snd_seq_device 4413 4 snd_seq_midi,snd_seq_oss,snd_seq,snd_rawmidi
floppy 48369 0
rtc 4807 0
processor 23876 0
forcedeth 44596 0
snd 44492 12
snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_intel8x0,snd_ac97_codec,snd_mpu401,snd_mpu401_uart,snd_pcm,snd_rawmidi,snd_timer,snd_seq_device
thermal 7434 0
thermal_sys 10469 2 processor,thermal
snd_page_alloc 5833 2 snd_intel8x0,snd_pcm
button 4602 0
soundcore 4303 1 snd
tg3 105124 0
libphy 14410 1 tg3
e1000 82076 0
fuse 52906 0
jfs 137577 0
dm_snapshot 24208 0
dm_crypt 10019 0
dm_mirror 11378 0
dm_region_hash 6184 1 dm_mirror
dm_log 7312 2 dm_mirror,dm_region_hash
dm_mod 54625 19 dm_snapshot,dm_crypt,dm_mirror,dm_log
scsi_wait_scan 663 0
sbp2 17091 0
ohci1394 23779 0
ieee1394 58976 2 sbp2,ohci1394
sl811_hcd 8550 0
usbhid 21207 0
ohci_hcd 17517 0
uhci_hcd 17628 0
usb_storage 50625 0
ehci_hcd 30045 0
usbcore 105656 7
sl811_hcd,usbhid,ohci_hcd,uhci_hcd,usb_storage,ehci_hcd
aic94xx 63627 0
libsas 34062 1 aic94xx
lpfc 367820 0
qla2xxx 279790 0
megaraid_sas 36889 0
megaraid_mbox 23389 0
megaraid_mm 6897 1 megaraid_mbox
megaraid 35093 0
aacraid 59839 0
sx8 10981 0
DAC960 62400 0
cciss 37984 0
3w_9xxx 28458 0
3w_xxxx 20388 0
mptsas 42523 0
scsi_transport_sas 20829 3 aic94xx,libsas,mptsas
mptfc 11909 0
scsi_transport_fc 35379 3 lpfc,qla2xxx,mptfc
scsi_tgt 8338 1 scsi_transport_fc
mptspi 13095 0
mptscsih 23931 3 mptsas,mptfc,mptspi
mptbase 74059 4 mptsas,mptfc,mptspi,mptscsih
atp870u 23505 0
dc395x 27324 0
qla1280 18968 0
dmx3191d 8945 0
sym53c8xx 62383 0
gdth 72801 0
advansys 50310 0
initio 15313 0
BusLogic 18996 0
arcmsr 23420 0
aic7xxx 104712 0
aic79xx 119473 0
scsi_transport_spi 18315 5 mptspi,dmx3191d,sym53c8xx,aic7xxx,aic79xx
sg 23310 0
pdc_adma 5202 0
sata_inic162x 6519 0
sata_mv 23486 0
ata_piix 20548 0
ahci 19321 0
libahci 15819 1 ahci
sata_qstor 5001 0
sata_vsc 3806 0
sata_uli 2857 0
sata_sis 3570 0
sata_sx4 7854 0
sata_nv 18727 0
sata_via 7672 0
sata_svw 3998 0
sata_sil24 10465 0
sata_sil 7060 0
sata_promise 9513 0
pata_sl82c105 3145 0
pata_cs5530 4061 0
pata_cs5520 3523 0
pata_via 7479 0
pata_jmicron 2248 0
pata_marvell 2689 0
pata_sis 9776 1 sata_sis
pata_netcell 2078 0
pata_sc1200 2786 0
pata_pdc202xx_old 4120 0
pata_triflex 2878 0
pata_atiixp 3449 0
pata_opti 2615 0
pata_amd 9908 0
pata_ali 8839 0
pata_it8213 3247 0
pata_pcmcia 9893 0
pcmcia 28390 1 pata_pcmcia
firmware_class 4997 7
tg3,aic94xx,libsas,qla2xxx,qla1280,advansys,pcmcia
pcmcia_core 10161 1 pcmcia
pata_ns87415 3065 0
pata_ns87410 2621 0
pata_serverworks 5261 0
pata_artop 4572 0
pata_it821x 8157 0
pata_optidma 4358 0
pata_hpt3x2n 4515 0
pata_hpt3x3 2917 0
pata_hpt37x 9930 0
pata_hpt366 4846 0
pata_cmd64x 5432 0
pata_efar 3363 0
pata_rz1000 2610 0
pata_sil680 4313 0
pata_radisys 2743 0
pata_pdc2027x 5771 0
pata_mpiix 2715 0
libata 133427 52
libsas,pdc_adma,sata_inic162x,sata_mv,ata_piix,ahci,libahci,sata_qstor,sata_vsc,sata_uli,sata_sis,sata_sx4,sata_nv,sata_via,sata_svw,sata_sil24,sata_sil,sata_promise,pata_sl82c105,pata_cs5530,pata_cs5520,pata_via,pata_jmicron,pata_marvell,pata_sis,pata_netcell,pata_sc1200,pata_pdc202xx_old,pata_triflex,pata_atiixp,pata_opti,pata_amd,pata_ali,pata_it8213,pata_pcmcia,pata_ns87415,pata_ns87410,pata_serverworks,pata_artop,pata_it821x,pata_optidma,pata_hpt3x2n,pata_hpt3x3,pata_hpt37x,pata_hpt366,pata_cmd64x,pata_efar,pata_rz1000,pata_sil680,pata_radisys,pata_pdc2027x,pata_mpiix
next prev parent reply other threads:[~2011-02-14 12:04 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-13 23:19 [gentoo-user] ALSA - Still No Sound dhk
2011-02-14 2:01 ` Bill Kenworthy
2011-02-14 11:43 ` dhk [this message]
2011-02-14 17:29 ` [gentoo-user] " walt
2011-02-15 10:43 ` dhk
2011-02-26 21:53 ` walt
2011-03-06 0:29 ` dhk
2011-03-06 9:01 ` Mick
2011-03-06 8:56 ` Mick
2011-03-06 9:28 ` Dale
2011-03-06 10:59 ` Mick
2011-03-06 11:33 ` Dale
2011-03-06 16:25 ` dhk
2011-02-15 11:10 ` laconism
2011-02-15 11:35 ` dhk
2011-02-25 12:03 ` dhk
2011-03-06 18:50 ` Mark Knecht
2011-03-06 20:38 ` James Wall
2011-03-06 21:31 ` Mark Knecht
2011-03-07 12:41 ` dhk
2011-03-07 16:15 ` Mick
2011-03-15 12:42 ` dhk
2011-03-30 9:37 ` dhk
2011-03-30 13:50 ` Mark Knecht
2011-03-30 14:00 ` dhkuhl
2011-02-14 2:21 ` Nikos Chantziaras
2011-02-14 11:44 ` dhk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D59155A.7000301@optonline.net \
--to=dhkuhl@optonline.net \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox