Re: [gentoo-user] Problems booting my server - ext2 - e2fsck

[KH <gentoo-user@konstantinhansen.de>]

Am 28.07.2010 17:27, schrieb Bill Longman:
> On 07/28/2010 07:56 AM, KH wrote:
>> Am 28.07.2010 15:45, schrieb Bill Longman:
>>>
>>> Konstantin, please post what your kernel has for IDE support. If you
>>> have /proc/config.gz, then please post the results from "zgrep IDE
>>> /proc/config.gz" so we can get an idea of why you have no /dev/hd*
>>> devices. We will also need to know what kind of disk controller your
>>> server really has. Are they IDE or SATA controllers?
>>>
>>
>> Hi Bill,
>>
>> Now I am running 2.6.30-r8 but 2.6.34-r1 is ready but not jet copied to
>> /boot. btw it is a p3 coppermine.
>>
>> This is the output from zgrep IDE /proc/config.gz .
>>
>>
>> CONFIG_HAVE_IDE=y
>> CONFIG_IDE=y
>> # Please see Documentation/ide/ide.txt for help/info on IDE drives
>> CONFIG_IDE_XFER_MODE=y
>> CONFIG_IDE_TIMINGS=y
>> CONFIG_IDE_ATAPI=y
>> # CONFIG_BLK_DEV_IDE_SATA is not set
>> CONFIG_IDE_GD=y
>> CONFIG_IDE_GD_ATA=y
>> CONFIG_IDE_GD_ATAPI=y
>> CONFIG_BLK_DEV_IDECD=y
>> CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
>> # CONFIG_BLK_DEV_IDETAPE is not set
>> CONFIG_BLK_DEV_IDEACPI=y
>> # CONFIG_IDE_TASK_IOCTL is not set
>> CONFIG_IDE_PROC_FS=y
>> # IDE chipset support/bugfixes
>> CONFIG_IDE_GENERIC=y
>> # CONFIG_BLK_DEV_IDEPNP is not set
>> CONFIG_BLK_DEV_IDEDMA_SFF=y
>> # PCI IDE chipsets support
>> CONFIG_BLK_DEV_IDEPCI=y
>> CONFIG_IDEPCI_PCIBUS_ORDER=y
>> CONFIG_BLK_DEV_IDEDMA_PCI=y
>> CONFIG_BLK_DEV_IDEDMA=y
>> # CONFIG_VIDEO_DEV is not set
>> # CONFIG_VIDEO_MEDIA is not set
>> # CONFIG_VIDEO_OUTPUT_CONTROL is not set
>> # CONFIG_FB_TRIDENT is not set
>> # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
> 
> I would expect to see:
> 
> CONFIG_BLK_DEV_PIIX=y
> 
> in your configuration given that it's a Coppermine. You might want to
> add that in the 2.6.30 and the 2.6.34 kernels, although DEV_GENERIC
> should give you what you need, as you are probably using that right now.
> 
> Use "make menuconfig" to configure the kernel. Make sure it's "<*>" not
> "<M>" for the PIIX controller and then rebuild and install the kernel.
> 
> Do you have "lspci" installed? The results from "lspci -v" would be very
> helpful right now.
> 
>> I just tried /etc/init.de/udev resart . I am getting errors not to use
>> the script with baselayout-1 . The box is very slow now. Will reboot and
>> see what baselayout is on it.
> 
> Yeah, don't worry about this right now.
> 

lspci:

00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and
Memory Controller Hub (rev 02)
        Subsystem: ASUSTeK Computer Inc. TUSL2-C Mainboard
        Flags: bus master, fast devsel, latency 0
        Memory at f8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [88] Vendor Specific Information <?>
        Capabilities: [a0] AGP version 2.0
        Kernel driver in use: agpgart-intel

00:01.0 PCI bridge: Intel Corporation 82815 815 Chipset AGP Bridge (rev
02) (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, fast devsel, latency 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: ee000000-efefffff
        Prefetchable memory behind bridge: eff00000-f7ffffff

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 02) (prog-if
00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: ed800000-edffffff

00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 02)
        Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 Controller
(rev 02) (prog-if 80 [Master])
        Subsystem: ASUSTeK Computer Inc. TUSL2-C Mainboard
        Flags: bus master, medium devsel, latency 0
        [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
        [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
        [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
        [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
        I/O ports at b800 [size=16]
        Kernel driver in use: PIIX_IDE

00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1
(rev 02) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. TUSL2-C Mainboard
        Flags: bus master, medium devsel, latency 0, IRQ 12
        I/O ports at b400 [size=32]
        Kernel driver in use: uhci_hcd

00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus Controller (rev 02)
        Subsystem: ASUSTeK Computer Inc. TUSL2-C Mainboard
        Flags: medium devsel, IRQ 10
        I/O ports at e800 [size=16]

00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1
(rev 02) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. TUSL2-C Mainboard
        Flags: bus master, medium devsel, latency 0, IRQ 6
        I/O ports at b000 [size=32]
        Kernel driver in use: uhci_hcd

01:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2
MX200] (rev b2) (prog-if 00 [VGA controller])
        Subsystem: ABIT Computer Corp. Device 6106
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
        Memory at ee000000 (32-bit, non-prefetchable) [size=16M]
        Memory at f0000000 (32-bit, prefetchable) [size=128M]
        Expansion ROM at efff0000 [disabled] [size=64K]
        Capabilities: [60] Power Management version 2
        Capabilities: [44] AGP version 2.0
        Kernel modules: nvidia

02:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Allied Telesyn International AT-2500TX/ACPI
        Flags: bus master, medium devsel, latency 32, IRQ 5
        I/O ports at d800 [size=256]
        Memory at ed800000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
        Kernel driver in use: 8139too


Regards