[gentoo-user] hal, how to chose between nvidia and nv

[gentoo-user] hal, how to chose between nvidia and nv

[Arnau Bria]

Hi all,

I have no xorg.conf, so hal does all the conf stuff for me.
My problem (I think) is that I have both modules in my sytem:


[I] x11-drivers/nvidia-drivers

$ grep nv /etc/make.conf 
VIDEO_CARDS="vesa nvidia"


and seems that Xorg tries some drivers and finally loads nv driver:

from less /var/log/Xorg.0.log, some relevant info:

[..]
(--) PCI:*(0:1:0:0) 10de:0221:0000:0000 nVidia Corporation NV44A [GeForce 6200] rev 161, Mem
[...]

(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
        compiled for 4.0.2, module version = 1.0.0
        Module class: X.Org Server Extension
(II) NVIDIA GLX Module  180.60  Tue May 12 12:42:34 PDT 2009
[...]
(II) LoadModule: "dri"
(WW) Warning, couldn't open module dri
(II) UnloadModule: "dri"
(EE) Failed to load module "dri" (module does not exist, 0)
(II) LoadModule: "dri2"
(WW) Warning, couldn't open module dri2
(II) UnloadModule: "dri2"
(EE) Failed to load module "dri2" (module does not exist, 0)
(II) LoadModule: "nv"
(II) Loading /usr/lib/xorg/modules/drivers//nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
        compiled for 1.6.3.901, module version = 2.1.14
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
        compiled for 1.6.3.901, module version = 2.2.1
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
[...]
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "GeForce 6200"
(II) NV(0): Creating default Display subsection in Screen section
        "Builtin Default nv Screen 0" for depth/fbbpp 24/32
(==) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
[...]
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[...]


from here all refers to NV.

Am Iworng or my xorg uses nv driver? if so, how may I force hal to use
nvidia driver? what about dri module? why is it failling to load it?

TIA,
-- 
Arnau Bria
http://blog.emergetux.net
Bombing for peace is like fucking for virginity

Re: [gentoo-user] hal, how to chose between nvidia and nv

[Jesús Guerrero]

On Wed, 4 Nov 2009 11:08:26 +0100, Arnau Bria <arnau@emergetux.net> wrote:
> Hi all,
> 
> I have no xorg.conf, so hal does all the conf stuff for me.
> My problem (I think) is that I have both modules in my sytem:
> 
> 
> [I] x11-drivers/nvidia-drivers
> 
> $ grep nv /etc/make.conf 
> VIDEO_CARDS="vesa nvidia"
> 
> 
> and seems that Xorg tries some drivers and finally loads nv driver:
> 
> from less /var/log/Xorg.0.log, some relevant info:
> 
> [..]
> (--) PCI:*(0:1:0:0) 10de:0221:0000:0000 nVidia Corporation NV44A
[GeForce
> 6200] rev 161, Mem
> [...]
> 
> (II) LoadModule: "glx"
> (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
> (II) Module glx: vendor="NVIDIA Corporation"
>         compiled for 4.0.2, module version = 1.0.0
>         Module class: X.Org Server Extension
> (II) NVIDIA GLX Module  180.60  Tue May 12 12:42:34 PDT 2009
> [...]
> (II) LoadModule: "dri"
> (WW) Warning, couldn't open module dri
> (II) UnloadModule: "dri"
> (EE) Failed to load module "dri" (module does not exist, 0)
> (II) LoadModule: "dri2"
> (WW) Warning, couldn't open module dri2
> (II) UnloadModule: "dri2"
> (EE) Failed to load module "dri2" (module does not exist, 0)
> (II) LoadModule: "nv"
> (II) Loading /usr/lib/xorg/modules/drivers//nv_drv.so
> (II) Module nv: vendor="X.Org Foundation"
>         compiled for 1.6.3.901, module version = 2.1.14
>         Module class: X.Org Video Driver
>         ABI class: X.Org Video Driver, version 5.0
> (II) LoadModule: "vesa"
> (II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
> (II) Module vesa: vendor="X.Org Foundation"
>         compiled for 1.6.3.901, module version = 2.2.1
>         Module class: X.Org Video Driver
>         ABI class: X.Org Video Driver, version 5.0
> (II) LoadModule: "fbdev"
> (WW) Warning, couldn't open module fbdev
> (II) UnloadModule: "fbdev"
> (EE) Failed to load module "fbdev" (module does not exist, 0)
> (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
> [...]
> (II) NV(0): Initializing int10
> (II) NV(0): Primary V_BIOS segment is: 0xc000
> (--) NV(0): Chipset: "GeForce 6200"
> (II) NV(0): Creating default Display subsection in Screen section
>         "Builtin Default nv Screen 0" for depth/fbbpp 24/32
> (==) NV(0): Depth 24, (--) framebuffer bpp 32
> (==) NV(0): RGB weight 888
> (==) NV(0): Default visual is TrueColor
> [...]
> (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not
> found)
> [...]
> 
> 
> from here all refers to NV.
> 
> Am Iworng or my xorg uses nv driver? if so, how may I force hal to use
> nvidia driver? what about dri module? why is it failling to load it?

This is only one of the reasons (only one of them) why hal in X is as
useless as it can get: if you use any driver that's not provided by the
Xorg guys then you still need an xorg.conf.

About dri, I don't think nv supports dri at all. It certainly doesn't do
any 3d.

-- 
Jesús Guerrero

Re: [gentoo-user] hal, how to chose between nvidia and nv

[Peter Haworth]

[-- Attachment #1: Type: text/plain, Size: 1706 bytes --]

On Wed, 04 Nov 2009 11:52:45 +0100, =?UTF-8?Q?Jes=C3=BAs_Guerrero?= wrote:
> On Wed, 4 Nov 2009 11:08:26 +0100, Arnau Bria <arnau@emergetux.net> wrote:
> > Am Iworng or my xorg uses nv driver? if so, how may I force hal to use
> > nvidia driver? what about dri module? why is it failling to load it?
> 
> This is only one of the reasons (only one of them) why hal in X is as
> useless as it can get: if you use any driver that's not provided by the
> Xorg guys then you still need an xorg.conf.

True, but it doesn't need much in it. I'm not generally a hal apologist,
but I'm quite happy with this as my entire xorg.conf:

  Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
  EndSection

-- 
	Peter Haworth	pmh@edison.ioppublishing.com
"It's about time we got some GUI sugar to add to the bitter black hotness
 of our terminal windows. I like my terminals like my women:
 VT100 compatible with Tektronix extensions"
		-- NTK 2004-09-17

This email (and attachments) are confidential and intended for the addressee(s) only. If you are not the intended recipient please notify the sender, 
delete any copies and do not take action in reliance on it. Any views expressed are the author's and do not represent those of IOP, except where specifically 
stated. IOP takes reasonable precautions to protect against viruses but accepts no responsibility for loss or damage arising from virus infection. 
For the protection of IOP's systems and staff emails are scanned automatically.” 

Institute of Physics Registered in England under Registration No 293851 
Registered Office:  76/78 Portland Place, London W1B 1NT  

[-- Attachment #2: Type: text/html, Size: 2121 bytes --]

Re: [gentoo-user] hal, how to chose between nvidia and nv

[Arnau Bria]

On Wed,  4 Nov 2009 11:17:15 +0000
Peter Haworth wrote:

[...]
> > This is only one of the reasons (only one of them) why hal in X is
> > as useless as it can get: if you use any driver that's not provided
> > by the Xorg guys then you still need an xorg.conf.

> True, but it doesn't need much in it. I'm not generally a hal
> apologist, but I'm quite happy with this as my entire xorg.conf:
> 
>   Section "Device"
>     Identifier     "Device0"
>     Driver         "nvidia"
>     VendorName     "NVIDIA Corporation"
>   EndSection
Will try eth this.

Thanks!

-- 
Arnau Bria
http://blog.emergetux.net
Bombing for peace is like fucking for virginity

Re: [gentoo-user] hal, how to chose between nvidia and nv

[Dale]

Arnau Bria wrote:
>
> or try xorg with no hal support.
>
> Thanks for your replies!
>
>   

I can tell you that using xorg without hal works.  I gave up on hal a
while back.  If you want to know how to get rid of hal support, just let
us know or search the archives.

Dale

:-)  :-) 

Re: [gentoo-user] hal, how to chose between nvidia and nv

[Alex Schuster]

Arnau Bria writes:

> On Wed,  4 Nov 2009 11:17:15 +0000 Peter Haworth wrote:

> >   Section "Device"
> >     Identifier     "Device0"
> >     Driver         "nvidia"
> >     VendorName     "NVIDIA Corporation"
> >   EndSection
> 
> tried with only that section, it hangs and had to reboot.... 

Did you try the being-mentioned-here-quite-often-these-days-of-X-trouble 
trick of Alt-SysRq-R, followed by Ctrl-Alt-F1?


> So, I'll stay with nv.... or try xorg with no hal support.

I have hal support in it, but also still keyboard and mouse sections in 
xorg.conf. I also have 
        Option         "AutoAddDevices"  "false"
        Option         "AllowEmptyInput" "false"
in the ServerLayout section to make them still work. so I can easier 
switch between using and not using HAL for devices than by re-compiling 
with changes USE flags.

	Wonko

Re: [gentoo-user] hal, how to chose between nvidia and nv

[Arnau Bria]

On Wed, 04 Nov 2009 08:34:06 -0600
Dale Dale wrote:

> I can tell you that using xorg without hal works.  I gave up on hal a
> while back.  If you want to know how to get rid of hal support, just
> let us know or search the archives.
Well, I did a quick serach with [xorg without hal] or no hal support
and other and got many results...

do you remember subject on that threat? any link to a guide?


> Dale
Thanks Dale!

-- 
Arnau Bria
http://blog.emergetux.net
Bombing for peace is like fucking for virginity

Re: [gentoo-user] hal, how to chose between nvidia and nv

[Arnau Bria]

> > tried with only that section, it hangs and had to reboot.... 
> 
> Did you try the
> being-mentioned-here-quite-often-these-days-of-X-trouble trick of
> Alt-SysRq-R, followed by Ctrl-Alt-F1?
nop, did not remeber key combination, but I don't care if I have to
reboot, not the issue in this topic.

> I have hal support in it, but also still keyboard and mouse sections
> in xorg.conf. I also have 
>         Option         "AutoAddDevices"  "false"
>         Option         "AllowEmptyInput" "false"
> in the ServerLayout section to make them still work. so I can easier 
> switch between using and not using HAL for devices than by
> re-compiling with changes USE flags.
Ok, but if I have to add input section and nvidia section, what profit
do I take from hal? I prefer having my weel know xorg file :-)


> 	Wonko
thanks for your reply,
Arnau

-- 
Arnau Bria
http://blog.emergetux.net
Bombing for peace is like fucking for virginity

Re: [gentoo-user] hal, how to chose between nvidia and nv

[Alex Schuster]

Arnau Bria writes:

> > I have hal support in it, but also still keyboard and mouse sections
> > in xorg.conf. I also have
> >         Option         "AutoAddDevices"  "false"
> >         Option         "AllowEmptyInput" "false"
> > in the ServerLayout section to make them still work. so I can easier
> > switch between using and not using HAL for devices than by
> > re-compiling with changes USE flags.
> 
> Ok, but if I have to add input section and nvidia section, what profit
> do I take from hal? I prefer having my weel know xorg file :-)

Probably no much, apart from having not to put -hal in package.use. Maybe 
the detection of your monitor is improved. I heard that switching 
resolutions with Ctrl-Alt-+/- is also faster now (seems to be true here), 
but that might also be related to the new X.org, not HAL.
And it's easier to try HAL again on the fly, without having to re-build 
xorg with changed USE flag. If you decide to drop it completely from 
X.org, and never try again, just remove it with -hal use flag. Some day 
HAL will be replaced by devicekit anyway, but that may take a while to 
happen.

	Wonko

Re: [gentoo-user] hal, how to chose between nvidia and nv

[Arnau Bria]

On Wed,  4 Nov 2009 11:17:15 +0000
Peter Haworth wrote:

> On Wed, 04 Nov 2009 11:52:45 +0100, =?UTF-8?Q?Jes=C3=BAs_Guerrero?=
> wrote:
> > On Wed, 4 Nov 2009 11:08:26 +0100, Arnau Bria <arnau@emergetux.net>
> > wrote:
> > > Am Iworng or my xorg uses nv driver? if so, how may I force hal
> > > to use nvidia driver? what about dri module? why is it failling
> > > to load it?
> > 
> > This is only one of the reasons (only one of them) why hal in X is
> > as useless as it can get: if you use any driver that's not provided
> > by the Xorg guys then you still need an xorg.conf.
> 
> True, but it doesn't need much in it. I'm not generally a hal
> apologist, but I'm quite happy with this as my entire xorg.conf:
> 
>   Section "Device"
>     Identifier     "Device0"
>     Driver         "nvidia"
>     VendorName     "NVIDIA Corporation"
>   EndSection
tried with only that section, it hangs and had to reboot.... X was
really slow and log showed errors like:

(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Initialized AGP GART.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Logitech USB-PS/2 Optical Mouse: Device reopened after 1 attempts.
(II) Logitech Logitech USB Keyboard: Device reopened after 1 attempts.
(II) Logitech Logitech USB Keyboard: Device reopened after 1 attempts.
(WW) NVIDIA(0): WAIT (0, 7, 0x8000, 0x0000d384, 0x0000d384)
(WW) NVIDIA(0): WAIT (0, 7, 0x8000, 0x0000d3a8, 0x0000d3a8)
(WW) NVIDIA(0): WAIT (0, 7, 0x8000, 0x0000d3cc, 0x0000d3cc)
(WW) NVIDIA(0): WAIT (0, 7, 0x8000, 0x0000d3f0, 0x0000d3f0)
(II) NVIDIA(0): Initialized AGP GART.

So, I'll stay with nv.... or try xorg with no hal support.

Thanks for your replies!

-- 
Arnau Bria
http://blog.emergetux.net
Bombing for peace is like fucking for virginity

Re: [gentoo-user] hal, how to chose between nvidia and nv

[Stefan G. Weichinger]

Dale schrieb:
> Arnau Bria wrote:
>> or try xorg with no hal support.
>>
>> Thanks for your replies!
>>
>>   
> 
> I can tell you that using xorg without hal works.  I gave up on hal a
> while back.  If you want to know how to get rid of hal support, just let
> us know or search the archives.

I would also like to know ... oh yes.

Re: [gentoo-user] hal, how to chose between nvidia and nv

[Dale]

Stefan G. Weichinger wrote:
> Dale schrieb:
>   
>> Arnau Bria wrote:
>>     
>>> or try xorg with no hal support.
>>>
>>> Thanks for your replies!
>>>
>>>   
>>>       
>> I can tell you that using xorg without hal works.  I gave up on hal a
>> while back.  If you want to know how to get rid of hal support, just let
>> us know or search the archives.
>>     
>
> I would also like to know ... oh yes.
>
>
>   

Both ways have been mentioned in other replies.  You can emerge xorg
with hal disabled, either globally or in package.use, or add the line
Option "AutoAddDevices" "false" to xorg.conf. 

Now me, I wanted to make very sure so I put both.  I disabled the USE
flag and put the line in xorg.conf just to make certain.

So far it works fine here.  I hope this will work for you as well if you
decide to try this way.

Dale

:-)  :-) 

Re: [gentoo-user] hal, how to chose between nvidia and nv

[Arnau Bria]

On Wed, 04 Nov 2009 22:45:35 -0600
Dale Dale wrote:


> So far it works fine here.  I hope this will work for you as well if
> you decide to try this way.
Thanks Dale!
 
> Dale
Cheers,
-- 
Arnau Bria
http://blog.emergetux.net
Bombing for peace is like fucking for virginity

Re: [gentoo-user] hal, how to chose between nvidia and nv

[Dale]

Arnau Bria wrote:
> On Wed, 04 Nov 2009 22:45:35 -0600
> Dale Dale wrote:
>
>
>   
>> So far it works fine here.  I hope this will work for you as well if
>> you decide to try this way.
>>     
> Thanks Dale!
>  
>   
>> Dale
>>     
> Cheers,
>   

Your welcome.  If it doesn't work with it, try it without it.  What else
can any of us do?

Dale

:-)  :-)