* Re: [gentoo-user] KDM problem
2009-07-21 5:09 ` Volker Armin Hemmann
@ 2009-07-21 6:04 ` Hung Dang
0 siblings, 0 replies; 5+ messages in thread
From: Hung Dang @ 2009-07-21 6:04 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 946 bytes --]
Volker Armin Hemmann wrote:
> On Dienstag 21 Juli 2009, Hung Dang wrote:
>
>> Hi all,
>> For some reason I could not start kde4 on my laptop. Everything is fine
>> and when I try to log into my account using the kdm log in window it
>> will log in for a second then get back to kdm window. Here is the
>> content of ~/.xsession-errors
>>
>> Warning: Cannot convert string "12x24" to type FontStruct
>> Warning: Cannot convert string "nil2" to type FontStruct
>> X connection to :0.0 broken (explicit kill or server shutdown).
>> X connection to :0.0 broken (explicit kill or server shutdown).
>>
>> Does anyone know what is going on with my kde4 session? I have installed
>> KDE-4.2.4 and Xorg-server 1.6.2-r1 on my laptop.
>>
>> Thanks
>> Hung
>>
>
> Xorg.0.log please.
> also:
> xorg.conf
> dmesg
>
>
>
Hi Volker
Thanks a lot for a quick reply. Please find the xorg.conf, dmesg, and
the Xorg.log in the attached files.
Regards
Hung
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 51012 bytes --]
Linux version 2.6.30-gentoo-r1-hunghien (root@hunghien) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.2, pie-10.1.5) ) #5 SMP Tue Jun 23 19:12:00 MDT 2009
Command line: root=/dev/sda4 video=uvesafb:1280x800-32,mtrr:3,ywrap splash=verbose,fadein,theme:natural_gentoo console=tty1
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe5a800 (usable)
BIOS-e820: 000000007fe5a800 - 0000000080000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x7fe5a max_arch_pfn = 0x100000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07FF00000 mask FFFF00000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
init_memory_mapping: 0000000000000000-000000007fe5a000
0000000000 - 007fe00000 page 2M
007fe00000 - 007fe5a000 page 4k
kernel direct mapping tables up to 7fe5a000 @ 8000-c000
ACPI: RSDP 00000000000fbb10 00024 (v02 DELL )
ACPI: XSDT 000000007fe5d200 00064 (v01 DELL M08 27D80B18 ASL 00000061)
ACPI: FACP 000000007fe5d09c 000F4 (v04 DELL M08 27D80B18 ASL 00000061)
ACPI: DSDT 000000007fe5d800 06114 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
ACPI: FACS 000000007fe6c000 00040
ACPI: HPET 000000007fe5d300 00038 (v01 DELL M08 00000001 ASL 00000061)
ACPI: APIC 000000007fe5d400 00068 (v01 DELL M08 27D80B18 ASL 00000047)
ACPI: ASF! 000000007fe5d000 0007E (v32 DELL M08 27D80B18 ASL 00000061)
ACPI: MCFG 000000007fe5d3c0 0003E (v16 DELL M08 27D80B18 ASL 00000061)
ACPI: TCPA 000000007fe5d700 00032 (v01 00000000 ASL 00000000)
ACPI: SLIC 000000007fe5d49c 00176 (v01 DELL M08 27D80B18 ASL 00000061)
ACPI: SSDT 000000007fe5b9c0 004CC (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000007fe5a000
Bootmem setup node 0 0000000000000000-000000007fe5a000
NODE_DATA [0000000000001000 - 0000000000004fff]
bootmap [000000000000a000 - 0000000000019fcf] pages 10
(6 early reservations) ==> bootmem [0000000000 - 007fe5a000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 0000afb3d8] TEXT DATA BSS ==> [0000200000 - 0000afb3d8]
#3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#4 [0000afc000 - 0000afc1ec] BRK ==> [0000afc000 - 0000afc1ec]
#5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0007fe5a
On node 0 totalpages: 523769
DMA zone: 56 pages used for memmap
DMA zone: 2401 pages reserved
DMA zone: 1542 pages, LIFO batch:0
DMA32 zone: 7107 pages used for memmap
DMA32 zone: 512663 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:78000000)
NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 25 pages at ffff880001010000, static data 69728 bytes
Built 1 zonelists in Node order, mobility grouping on. Total pages: 514205
Policy zone: DMA32
Kernel command line: root=/dev/sda4 video=uvesafb:1280x800-32,mtrr:3,ywrap splash=verbose,fadein,theme:natural_gentoo console=tty1
Initializing CPU#0
NR_IRQS:320
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 1994.405 MHz processor.
Console: colour VGA+ 80x25
console [tty1] enabled
Checking aperture...
No AGP bridge found
Memory: 2056576k/2095464k available (4985k kernel code, 388k absent, 38500k reserved, 2656k data, 648k init)
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3988.81 BogoMIPS (lpj=7977620)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 0/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20090320
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3988.85 BogoMIPS (lpj=7977705)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (7977.66 BogoMIPS).
net_namespace: 960 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG at f8000000 - fbffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 000000007fe6c080 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Scanning bus 0000:00
pci 0000:00:00.0: found [8086:2a00] class 000600 header type 00
pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1aa
pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x2b
pci 0000:00:01.0: found [8086:2a01] class 000604 header type 01
pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x1aa
pci 0000:00:01.0: calling pci_fixup_transparent_bridge+0x0/0x2b
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: found [8086:2834] class 000c03 header type 00
pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f]
pci 0000:00:1a.0: calling quirk_resource_alignment+0x0/0x1aa
pci 0000:00:1a.0: calling pci_fixup_transparent_bridge+0x0/0x2b
pci 0000:00:1a.1: found [8086:2835] class 000c03 header type 00
pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f]
pci 0000:00:1a.1: calling quirk_resource_alignment+0x0/0x1aa
pci 0000:00:1a.1: calling pci_fixup_transparent_bridge+0x0/0x2b
pci 0000:00:1a.7: found [8086:283a] class 000c03 header type 00
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
pci 0000:00:1a.7: calling quirk_resource_alignment+0x0/0x1aa
pci 0000:00:1a.7: calling pci_fixup_transparent_bridge+0x0/0x2b
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: found [8086:284b] class 000403 header type 00
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6ffc000-0xf6ffffff]
pci 0000:00:1b.0: calling quirk_resource_alignment+0x0/0x1aa
pci 0000:00:1b.0: calling pci_fixup_transparent_bridge+0x0/0x2b
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: found [8086:283f] class 000604 header type 01
pci 0000:00:1c.0: calling quirk_resource_alignment+0x0/0x1aa
pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x2b
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: found [8086:2841] class 000604 header type 01
pci 0000:00:1c.1: calling quirk_resource_alignment+0x0/0x1aa
pci 0000:00:1c.1: calling pci_fixup_transparent_bridge+0x0/0x2b
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.5: found [8086:2849] class 000604 header type 01
pci 0000:00:1c.5: calling quirk_resource_alignment+0x0/0x1aa
pci 0000:00:1c.5: calling pci_fixup_transparent_bridge+0x0/0x2b
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: found [8086:2830] class 000c03 header type 00
pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f]
pci 0000:00:1d.0: calling quirk_resource_alignment+0x0/0x1aa
pci 0000:00:1d.0: calling pci_fixup_transparent_bridge+0x0/0x2b
pci 0000:00:1d.1: found [8086:2831] class 000c03 header type 00
pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f]
pci 0000:00:1d.1: calling quirk_resource_alignment+0x0/0x1aa
pci 0000:00:1d.1: calling pci_fixup_transparent_bridge+0x0/0x2b
pci 0000:00:1d.2: found [8086:2832] class 000c03 header type 00
pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
pci 0000:00:1d.2: calling quirk_resource_alignment+0x0/0x1aa
pci 0000:00:1d.2: calling pci_fixup_transparent_bridge+0x0/0x2b
pci 0000:00:1d.7: found [8086:2836] class 000c03 header type 00
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
pci 0000:00:1d.7: calling quirk_resource_alignment+0x0/0x1aa
pci 0000:00:1d.7: calling pci_fixup_transparent_bridge+0x0/0x2b
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: found [8086:2448] class 000604 header type 01
pci 0000:00:1e.0: calling quirk_resource_alignment+0x0/0x1aa
pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x2b
pci 0000:00:1f.0: found [8086:2815] class 000601 header type 00
pci 0000:00:1f.0: calling ich_force_enable_hpet+0x0/0x200
pci 0000:00:1f.0: calling quirk_ich7_lpc+0x0/0x5a
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
pci 0000:00:1f.0: calling quirk_resource_alignment+0x0/0x1aa
pci 0000:00:1f.0: calling pci_fixup_transparent_bridge+0x0/0x2b
pci 0000:00:1f.1: found [8086:2850] class 000101 header type 00
pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf]
pci 0000:00:1f.1: calling quirk_resource_alignment+0x0/0x1aa
pci 0000:00:1f.1: calling pci_fixup_transparent_bridge+0x0/0x2b
pci 0000:00:1f.2: found [8086:2829] class 000106 header type 00
pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7]
pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb]
pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7]
pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb]
pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eff]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xf6ffb800-0xf6ffbfff]
pci 0000:00:1f.2: calling quirk_resource_alignment+0x0/0x1aa
pci 0000:00:1f.2: calling pci_fixup_transparent_bridge+0x0/0x2b
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: found [8086:283e] class 000c05 header type 00
pci 0000:00:1f.3: reg 10 32bit mmio: [0xf6ffb700-0xf6ffb7ff]
pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
pci 0000:00:1f.3: calling quirk_resource_alignment+0x0/0x1aa
pci 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x2b
PCI: Fixups for bus 0000:00
pci 0000:00:01.0: scanning behind bridge, config 010100, pass 0
PCI: Scanning bus 0000:01
pci 0000:01:00.0: found [10de:042b] class 000300 header type 00
pci 0000:01:00.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xf2000000-0xf3ffffff]
pci 0000:01:00.0: reg 24 io port: [0xef00-0xef7f]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x1aa
PCI: Fixups for bus 0000:01
pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
pci 0000:00:01.0: bridge 32bit mmio: [0xf2000000-0xf6efffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
PCI: Bus scan for 0000:01 returning with max=01
pci 0000:00:1c.0: scanning behind bridge, config 0b0b00, pass 0
PCI: Scanning bus 0000:0b
PCI: Fixups for bus 0000:0b
PCI: Bus scan for 0000:0b returning with max=0b
pci 0000:00:1c.1: scanning behind bridge, config 0c0c00, pass 0
PCI: Scanning bus 0000:0c
pci 0000:0c:00.0: found [8086:4229] class 000280 header type 00
pci 0000:0c:00.0: reg 10 64bit mmio: [0xf1ffe000-0xf1ffffff]
pci 0000:0c:00.0: calling quirk_resource_alignment+0x0/0x1aa
pci 0000:0c:00.0: calling pci_fixup_transparent_bridge+0x0/0x2b
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
PCI: Fixups for bus 0000:0c
pci 0000:00:1c.1: bridge 32bit mmio: [0xf1f00000-0xf1ffffff]
PCI: Bus scan for 0000:0c returning with max=0c
pci 0000:00:1c.5: scanning behind bridge, config 090900, pass 0
PCI: Scanning bus 0000:09
pci 0000:09:00.0: found [14e4:1673] class 000200 header type 00
pci 0000:09:00.0: reg 10 64bit mmio: [0xf1ef0000-0xf1efffff]
pci 0000:09:00.0: calling quirk_resource_alignment+0x0/0x1aa
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:09:00.0: PME# disabled
PCI: Fixups for bus 0000:09
pci 0000:00:1c.5: bridge 32bit mmio: [0xf1e00000-0xf1efffff]
PCI: Bus scan for 0000:09 returning with max=09
pci 0000:00:1e.0: scanning behind bridge, config 040300, pass 0
PCI: Scanning bus 0000:03
pci 0000:03:01.0: found [1217:7135] class 000607 header type 02
pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:03:01.0: calling quirk_resource_alignment+0x0/0x1aa
pci 0000:03:01.0: supports D1 D2
pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.0: PME# disabled
pci 0000:03:01.4: found [1217:00f7] class 000c00 header type 00
pci 0000:03:01.4: reg 10 32bit mmio: [0xf1dff000-0xf1dfffff]
pci 0000:03:01.4: reg 14 32bit mmio: [0xf1dfe800-0xf1dfefff]
pci 0000:03:01.4: calling quirk_resource_alignment+0x0/0x1aa
pci 0000:03:01.4: supports D1 D2
pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.4: PME# disabled
PCI: Fixups for bus 0000:03
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xf1d00000-0xf1dfffff]
pci 0000:03:01.0: scanning behind bridge, config 040403, pass 0
pci 0000:03:01.0: scanning behind bridge, config 040403, pass 1
PCI: Bus #04 (-#07) is partially hidden behind transparent bridge #03 (-#04)
PCI: Bus scan for 0000:03 returning with max=07
pci 0000:00:01.0: scanning behind bridge, config 010100, pass 1
pci 0000:00:1c.0: scanning behind bridge, config 0b0b00, pass 1
pci 0000:00:1c.1: scanning behind bridge, config 0c0c00, pass 1
pci 0000:00:1c.5: scanning behind bridge, config 090900, pass 1
pci 0000:00:1e.0: scanning behind bridge, config 040300, pass 1
PCI: Bus scan for 0000:00 returning with max=0c
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *5
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0b: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:0b: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: ioport range 0xc80-0xcaf has been reserved
system 00:05: ioport range 0xcc0-0xcff could not be reserved
system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:0a: ioport range 0xcb0-0xcbb has been reserved
system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:0b: ioport range 0x900-0x97f has been reserved
system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
system 00:0c: ioport range 0xf400-0xf4fe has been reserved
system 00:0c: ioport range 0x1080-0x10bf has been reserved
system 00:0c: ioport range 0x10c0-0x10df has been reserved
system 00:0c: ioport range 0x809-0x809 has been reserved
system 00:0d: iomem range 0x0-0x9efff could not be reserved
system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xcffff has been reserved
system 00:0d: iomem range 0xe0000-0xfffff has been reserved
system 00:0d: iomem range 0x100000-0x7fe5a7ff could not be reserved
system 00:0d: iomem range 0x7fe5a800-0x7fefffff has been reserved
system 00:0d: iomem range 0x7ff00000-0x7fffffff has been reserved
system 00:0d: iomem range 0x7ff00000-0x806fffff could not be reserved
system 00:0d: iomem range 0xffe00000-0xffffffff has been reserved
system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved
system 00:0d: iomem range 0xfec00000-0xfec0ffff has been reserved
system 00:0d: iomem range 0xfee00000-0xfee0ffff has been reserved
system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:0d: iomem range 0xfeda0000-0xfeda3fff has been reserved
system 00:0d: iomem range 0xfeda4000-0xfeda4fff has been reserved
system 00:0d: iomem range 0xfeda5000-0xfeda5fff has been reserved
system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved
system 00:0d: iomem range 0xfed18000-0xfed1bfff has been reserved
system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
pci 0000:01:00.0: BAR 6: got res [0xf4000000-0xf401ffff] bus [0xf4000000-0xf401ffff] flags 0x27200
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xe000-0xefff
pci 0000:00:01.0: MEM window: 0xf2000000-0xf6efffff
pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: 0xf1f00000-0xf1ffffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09
pci 0000:00:1c.5: IO window: disabled
pci 0000:00:1c.5: MEM window: 0xf1e00000-0xf1efffff
pci 0000:00:1c.5: PREFETCH window: disabled
pci 0000:03:01.0: BAR 0: got res [0xf1d00000-0xf1d00fff] bus [0xf1d00000-0xf1d00fff] flags 0x20200
pci 0000:03:01.0: BAR 0: moved to bus [0xf1d00000-0xf1d00fff] flags 0x20200
pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
pci 0000:03:01.0: IO window: 0x002000-0x0020ff
pci 0000:03:01.0: IO window: 0x002400-0x0024ff
pci 0000:03:01.0: PREFETCH window: 0x88000000-0x8bffffff
pci 0000:03:01.0: MEM window: 0x8c000000-0x8fffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0: IO window: 0x2000-0x2fff
pci 0000:00:1e.0: MEM window: 0xf1d00000-0xf1dfffff
pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:03:01.0: enabling device (0000 -> 0003)
pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:03:01.0: enabling bus mastering
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
pci_bus 0000:01: resource 1 mem: [0xf2000000-0xf6efffff]
pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
pci_bus 0000:0c: resource 1 mem: [0xf1f00000-0xf1ffffff]
pci_bus 0000:09: resource 1 mem: [0xf1e00000-0xf1efffff]
pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:03: resource 1 mem: [0xf1d00000-0xf1dfffff]
pci_bus 0000:03: resource 2 pref mem [0x88000000-0x8bffffff]
pci_bus 0000:03: resource 3 io: [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:04: resource 0 io: [0x2000-0x20ff]
pci_bus 0000:04: resource 1 io: [0x2400-0x24ff]
pci_bus 0000:04: resource 2 pref mem [0x88000000-0x8bffffff]
pci_bus 0000:04: resource 3 mem: [0x8c000000-0x8fffffff]
NET: Registered protocol family 2
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Kprobe smoke test started
Kprobe smoke test passed successfully
HugeTLB registered 2 MB page size, pre-allocated 0 pages
fuse init (API version 7.11)
msgmni has been set to 4016
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x1e0
pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:00:00.0: calling pci_fixup_video+0x0/0xbb
pci 0000:00:01.0: calling quirk_e100_interrupt+0x0/0x1e0
pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:00:01.0: calling pci_fixup_video+0x0/0xbb
pci 0000:00:1a.0: calling quirk_e100_interrupt+0x0/0x1e0
pci 0000:00:1a.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:00:1a.0: calling pci_fixup_video+0x0/0xbb
pci 0000:00:1a.1: calling quirk_e100_interrupt+0x0/0x1e0
pci 0000:00:1a.1: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:1a.1: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:00:1a.1: calling pci_fixup_video+0x0/0xbb
pci 0000:00:1a.7: calling quirk_e100_interrupt+0x0/0x1e0
pci 0000:00:1a.7: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:1a.7: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:00:1a.7: calling pci_fixup_video+0x0/0xbb
pci 0000:00:1b.0: calling quirk_e100_interrupt+0x0/0x1e0
pci 0000:00:1b.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:1b.0: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:00:1b.0: calling pci_fixup_video+0x0/0xbb
pci 0000:00:1c.0: calling quirk_e100_interrupt+0x0/0x1e0
pci 0000:00:1c.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:1c.0: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:00:1c.0: calling pci_fixup_video+0x0/0xbb
pci 0000:00:1c.1: calling quirk_e100_interrupt+0x0/0x1e0
pci 0000:00:1c.1: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:1c.1: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:00:1c.1: calling pci_fixup_video+0x0/0xbb
pci 0000:00:1c.5: calling quirk_e100_interrupt+0x0/0x1e0
pci 0000:00:1c.5: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:1c.5: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:00:1c.5: calling pci_fixup_video+0x0/0xbb
pci 0000:00:1d.0: calling quirk_e100_interrupt+0x0/0x1e0
pci 0000:00:1d.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:00:1d.0: calling pci_fixup_video+0x0/0xbb
pci 0000:00:1d.1: calling quirk_e100_interrupt+0x0/0x1e0
pci 0000:00:1d.1: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:1d.1: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:00:1d.1: calling pci_fixup_video+0x0/0xbb
pci 0000:00:1d.2: calling quirk_e100_interrupt+0x0/0x1e0
pci 0000:00:1d.2: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:1d.2: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:00:1d.2: calling pci_fixup_video+0x0/0xbb
pci 0000:00:1d.7: calling quirk_e100_interrupt+0x0/0x1e0
pci 0000:00:1d.7: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:1d.7: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:00:1d.7: calling pci_fixup_video+0x0/0xbb
pci 0000:00:1e.0: calling quirk_e100_interrupt+0x0/0x1e0
pci 0000:00:1e.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:1e.0: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:00:1e.0: calling pci_fixup_video+0x0/0xbb
pci 0000:00:1f.0: calling quirk_e100_interrupt+0x0/0x1e0
pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:1f.0: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:00:1f.0: calling pci_fixup_video+0x0/0xbb
pci 0000:00:1f.1: calling quirk_e100_interrupt+0x0/0x1e0
pci 0000:00:1f.1: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:1f.1: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:00:1f.1: calling pci_fixup_video+0x0/0xbb
pci 0000:00:1f.2: calling quirk_e100_interrupt+0x0/0x1e0
pci 0000:00:1f.2: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:1f.2: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:00:1f.2: calling pci_fixup_video+0x0/0xbb
pci 0000:00:1f.3: calling quirk_e100_interrupt+0x0/0x1e0
pci 0000:00:1f.3: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:00:1f.3: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:00:1f.3: calling pci_fixup_video+0x0/0xbb
pci 0000:01:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x7
pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:01:00.0: calling pci_fixup_video+0x0/0xbb
pci 0000:01:00.0: Boot video device
pci 0000:0c:00.0: calling quirk_e100_interrupt+0x0/0x1e0
pci 0000:0c:00.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:0c:00.0: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:0c:00.0: calling pci_fixup_video+0x0/0xbb
pci 0000:09:00.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:09:00.0: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:09:00.0: calling pci_fixup_video+0x0/0xbb
pci 0000:03:01.0: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:03:01.0: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:03:01.0: calling pci_fixup_video+0x0/0xbb
pci 0000:03:01.4: calling quirk_cardbus_legacy+0x0/0x30
pci 0000:03:01.4: calling quirk_usb_early_handoff+0x0/0x417
pci 0000:03:01.4: calling pci_fixup_video+0x0/0xbb
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.5: setting latency timer to 64
Real Time Clock Driver v1.12b
i8k: unable to get SMM BIOS version
Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
Linux agpgart interface v0.103
ipmi message handler version 39.2
uvesafb: NVIDIA Corporation, G86 Board - briscoe0, Chip Rev , OEM: NVIDIA, VBE v3.0
uvesafb: VBIOS/hardware doesn't support DDC transfers
uvesafb: no monitor limits have been set, default refresh rate will be used
uvesafb: scrolling: redraw
Console: switching to colour frame buffer device 160x50
uvesafb: framebuffer at 0xf3000000, mapped to 0xffffc20004980000, using 8000k, total 14336k
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [AC] (on-line)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffb900 irq 28
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffba00 irq 28
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
tg3.c:v3.98 (February 25, 2009)
tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:09:00.0: setting latency timer to 64
tg3 0000:09:00.0: PME# disabled
eth0: Tigon3 [partno(BCM95755m) rev a002] (PCI Express) MAC address 00:18:8b:db:3c:56
eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
console [netcon0] enabled
netconsole: network logging started
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
ohci1394 0000:03:01.4: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[f1dff000-f1dff7ff] Max Packet=[2048] IR/IT contexts=[8/8]
ieee1394: raw1394: /dev/raw1394 device initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.30-gentoo-r1-hunghien ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
ata4.00: ATAPI: TEAC DVD-ROM DV28EV, D.AD, max UDMA/33
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.30-gentoo-r1-hunghien ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
ata4.00: configured for UDMA/33
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.30-gentoo-r1-hunghien uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.30-gentoo-r1-hunghien uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.30-gentoo-r1-hunghien uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.30-gentoo-r1-hunghien uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.30-gentoo-r1-hunghien uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
Linux telephony interface: v1.00
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
usbhid: v2.6:USB HID core driver
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
registered taskstats version 1
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-7: SAMSUNG HM060HI, YD100-15, max UDMA7
ata1.00: 117210240 sectors, multi 8: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM060HI YD10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 3:0:0:0: CD-ROM TEAC DVD-ROM DV28EV D.AD PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
ata5: port disabled. ignoring.
usb 5-1: new low speed USB device using uhci_hcd and address 2
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input1
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
usb 5-1: New USB device found, idVendor=0461, idProduct=4d15
usb 5-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 5-1: Product: USB Optical Mouse
usb 5-1: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input3
generic-usb 0003:0461:4D15.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1/input0
sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
usb 7-1: new full speed USB device using uhci_hcd and address 2
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:4.
Freeing unused kernel memory: 648k freed
ieee1394: Host added: ID:BUS[0-00:1023] GUID[384fc00025499581]
usb 7-1: New USB device found, idVendor=0b97, idProduct=7761
usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 7-1: configuration #1 chosen from 1 choice
hub 7-1:1.0: USB hub found
hub 7-1:1.0: 4 ports detected
usb 7-1.2: new full speed USB device using uhci_hcd and address 3
usb 7-1.2: New USB device found, idVendor=0b97, idProduct=7772
usb 7-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1.2: Product: O2Micro CCID SC Reader
usb 7-1.2: Manufacturer: O2
usb 7-1.2: configuration #1 chosen from 1 choice
udev: starting version 141
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (53 C)
ACPI: SSDT 000000007fe5c4f6 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 000000007fe5be8c 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 000000007fe5c77c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT 000000007fe5c471 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
ACPI: Sleep Button [SBTN]
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kd
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:0c:00.0: setting latency timer to 64
iwlagn 0000:0c:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
iwlagn 0000:0c:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
iwlagn 0000:0c:00.0: irq 29 for MSI/MSI-X
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
phy0: Selected rate control algorithm 'iwl-agn-rs'
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:31/device:32/input/input7
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: setting latency timer to 64
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.60 Mon May 11 15:27:42 PDT 2009
EXT3 FS on sda4, internal journal
fbcondecor: console 0 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 0
fbcondecor: console 1 using theme 'emerge-world'
fbcondecor: switched decor state to 'on' on console 1
fbcondecor: console 2 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 2
fbcondecor: console 3 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 3
fbcondecor: console 4 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 4
fbcondecor: console 5 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 5
tg3 0000:09:00.0: PME# disabled
tg3 0000:09:00.0: irq 30 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
Clocksource tsc unstable (delta = -142702371 ns)
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Adding 4096564k swap on /dev/sda3. Priority:-1 extents:1 across:4096564k
iwlagn 0000:0c:00.0: firmware: requesting iwlwifi-4965-2.ucode
iwlagn 0000:0c:00.0: loaded firmware version 228.61.2.24
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
eth0: no IPv6 routers present
IRQ 16/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
fbcondecor: console 0 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 0
ata4.00: qc timeout (cmd 0xa0)
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata4.00: status: { DRDY ERR }
ata4: link is slow to respond, please be patient (ready=0)
ata4: device not ready (errno=-16), forcing hardreset
ata4: soft resetting link
ata4.00: configured for UDMA/33
ata4: EH complete
ata4.00: qc timeout (cmd 0xa0)
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata4.00: status: { DRDY ERR }
ata4: link is slow to respond, please be patient (ready=0)
ata4: device not ready (errno=-16), forcing hardreset
ata4: soft resetting link
ata4.00: configured for UDMA/33
ata4: EH complete
ata4.00: qc timeout (cmd 0xa0)
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata4.00: status: { DRDY ERR }
ata4: link is slow to respond, please be patient (ready=0)
ata4: device not ready (errno=-16), forcing hardreset
ata4: soft resetting link
ata4.00: configured for UDMA/33
ata4: EH complete
ata4.00: qc timeout (cmd 0xa0)
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata4.00: status: { DRDY ERR }
ata4: link is slow to respond, please be patient (ready=0)
ata4: device not ready (errno=-16), forcing hardreset
ata4: soft resetting link
ata4.00: configured for UDMA/33
ata4: EH complete
ata4.00: qc timeout (cmd 0xa0)
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata4.00: status: { DRDY ERR }
ata4: link is slow to respond, please be patient (ready=0)
ata4: device not ready (errno=-16), forcing hardreset
ata4: soft resetting link
ata4.00: configured for UDMA/33
ata4: EH complete
ata4.00: qc timeout (cmd 0xa0)
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata4.00: status: { DRDY ERR }
ata4: link is slow to respond, please be patient (ready=0)
ata4: device not ready (errno=-16), forcing hardreset
ata4: soft resetting link
ata4.00: configured for UDMA/33
ata4: EH complete
usb 2-4: new high speed USB device using ehci_hcd and address 4
usb 2-4: New USB device found, idVendor=2001, idProduct=f103
usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-4: configuration #1 chosen from 1 choice
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 7 ports detected
ata4.00: qc timeout (cmd 0xa0)
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata4.00: status: { DRDY ERR }
ata4: link is slow to respond, please be patient (ready=0)
ata4: device not ready (errno=-16), forcing hardreset
ata4: soft resetting link
ata4.00: configured for UDMA/33
ata4: EH complete
udev: starting version 141
ata4.00: qc timeout (cmd 0xa0)
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata4.00: status: { DRDY ERR }
ata4: link is slow to respond, please be patient (ready=0)
ata4: device not ready (errno=-16), forcing hardreset
ata4: soft resetting link
ata4.00: configured for UDMA/33
ata4: EH complete
ata4.00: qc timeout (cmd 0xa0)
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata4.00: status: { DRDY ERR }
ata4: link is slow to respond, please be patient (ready=0)
ata4: device not ready (errno=-16), forcing hardreset
ata4: soft resetting link
ata4.00: configured for UDMA/33
ata4: EH complete
[-- Attachment #3: xorg.log --]
[-- Type: text/plain, Size: 27829 bytes --]
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-gentoo-r3-hunghien x86_64
Current Operating System: Linux hunghien 2.6.30-gentoo-r1-hunghien #5 SMP Tue Jun 23 19:12:00 MDT 2009 x86_64
Build Date: 20 July 2009 07:39:06PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 20 22:40:36 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) Option "AllowEmptyInput" "true"
(**) Option "AutoAddDevices" "true"
(**) Option "AutoEnableDevices" "true"
(**) Automatically adding devices
(**) Automatically enabling devices
(WW) The directory "/usr/share/fonts/misc/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/misc/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/75dpi/" does not exist.
Entry deleted from font path.
(**) FontPath set to:
built-ins
(**) ModulePath set to "/usr/lib64/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0xb20
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:042b:1028:01f9 nVidia Corporation Quadro NVS 135M rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf2000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri"
(WW) Warning, couldn't open module dri
(II) UnloadModule: "dri"
(EE) Failed to load module "dri" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/lib64/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri2"
(II) Loading /usr/lib64/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 180.60 Mon May 11 15:53:29 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "wfb"
(II) Loading /usr/lib64/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) LoadModule: "nvidia"
(II) Loading /usr/lib64/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 180.60 Mon May 11 15:33:16 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Reloading /usr/lib64/xorg/modules//libwfb.so
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU Quadro NVS 135M (G86) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 60.86.68.00.16
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on Quadro NVS 135M at PCI:1:0:0:
(--) NVIDIA(0): AUO (DFP-0)
(--) NVIDIA(0): AUO (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): AUO (DFP-0): Internal Dual Link LVDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0): will be used as the requested mode.
(==) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
(--) NVIDIA(0): DPI set to (108, 106); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib64/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint
(II) LoadModule: "synaptics"
(II) Loading /usr/lib64/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.1.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event2"
(II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
(II) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
(II) AlpsPS/2 ALPS GlidePoint: finger width range 0 - 0
(II) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
(--) AlpsPS/2 ALPS GlidePoint: touchpad found
(**) AlpsPS/2 ALPS GlidePoint: always reports core events
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
(**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
(**) AlpsPS/2 ALPS GlidePoint: (accel) filter chain progression: 2.00
(**) AlpsPS/2 ALPS GlidePoint: (accel) filter stage 0: 20.00 ms
(**) AlpsPS/2 ALPS GlidePoint: (accel) set acceleration profile 0
(--) AlpsPS/2 ALPS GlidePoint: touchpad found
(II) config/hal: Adding input device PS/2 Mouse
(**) PS/2 Mouse: always reports core events
(**) PS/2 Mouse: Device: "/dev/input/event1"
(II) PS/2 Mouse: Found 3 mouse buttons
(II) PS/2 Mouse: Found x and y relative axes
(II) PS/2 Mouse: Configuring as mouse
(**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(**) PS/2 Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Mouse: (accel) filter chain progression: 2.00
(**) PS/2 Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2 Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device USB Optical Mouse
(**) USB Optical Mouse: always reports core events
(**) USB Optical Mouse: Device: "/dev/input/event3"
(II) USB Optical Mouse: Found 3 mouse buttons
(II) USB Optical Mouse: Found x and y relative axes
(II) USB Optical Mouse: Found scroll wheel(s)
(II) USB Optical Mouse: Configuring as mouse
(**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
(**) USB Optical Mouse: (accel) keeping acceleration scheme 1
(**) USB Optical Mouse: (accel) filter chain progression: 2.00
(**) USB Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) USB Optical Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "synaptics"
(II) PS/2 Mouse: Close
(II) UnloadModule: "evdev"
(II) USB Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(II) NVIDIA(0): DPMS enabled
(==) RandR enabled
(II) Initializing extension GLX
(EE) XKB: No components provided for device Virtual core keyboard
(WW) Couldn't load XKB keymap, falling back to pre-XKB keymap
[config/dbus] couldn't register object path
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event2"
(II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
(II) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
(II) AlpsPS/2 ALPS GlidePoint: finger width range 0 - 0
(II) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
(--) AlpsPS/2 ALPS GlidePoint: touchpad found
(**) AlpsPS/2 ALPS GlidePoint: always reports core events
(**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
(**) AlpsPS/2 ALPS GlidePoint: (accel) filter chain progression: 2.00
(**) AlpsPS/2 ALPS GlidePoint: (accel) filter stage 0: 20.00 ms
(**) AlpsPS/2 ALPS GlidePoint: (accel) set acceleration profile 0
(--) AlpsPS/2 ALPS GlidePoint: touchpad found
(II) config/hal: Adding input device PS/2 Mouse
(**) PS/2 Mouse: always reports core events
(**) PS/2 Mouse: Device: "/dev/input/event1"
(II) PS/2 Mouse: Found 3 mouse buttons
(II) PS/2 Mouse: Found x and y relative axes
(II) PS/2 Mouse: Configuring as mouse
(**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) PS/2 Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Mouse: (accel) filter chain progression: 2.00
(**) PS/2 Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2 Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device USB Optical Mouse
(**) USB Optical Mouse: always reports core events
(**) USB Optical Mouse: Device: "/dev/input/event3"
(II) USB Optical Mouse: Found 3 mouse buttons
(II) USB Optical Mouse: Found x and y relative axes
(II) USB Optical Mouse: Found scroll wheel(s)
(II) USB Optical Mouse: Configuring as mouse
(**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) USB Optical Mouse: (accel) keeping acceleration scheme 1
(**) USB Optical Mouse: (accel) filter chain progression: 2.00
(**) USB Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) USB Optical Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "synaptics"
(II) PS/2 Mouse: Close
(II) UnloadModule: "evdev"
(II) USB Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(II) NVIDIA(0): DPMS enabled
(==) RandR enabled
(II) Initializing extension GLX
(EE) XKB: No components provided for device Virtual core keyboard
(WW) Couldn't load XKB keymap, falling back to pre-XKB keymap
[config/dbus] couldn't register object path
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event2"
(II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
(II) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
(II) AlpsPS/2 ALPS GlidePoint: finger width range 0 - 0
(II) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
(--) AlpsPS/2 ALPS GlidePoint: touchpad found
(**) AlpsPS/2 ALPS GlidePoint: always reports core events
(**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
(**) AlpsPS/2 ALPS GlidePoint: (accel) filter chain progression: 2.00
(**) AlpsPS/2 ALPS GlidePoint: (accel) filter stage 0: 20.00 ms
(**) AlpsPS/2 ALPS GlidePoint: (accel) set acceleration profile 0
(--) AlpsPS/2 ALPS GlidePoint: touchpad found
(II) config/hal: Adding input device PS/2 Mouse
(**) PS/2 Mouse: always reports core events
(**) PS/2 Mouse: Device: "/dev/input/event1"
(II) PS/2 Mouse: Found 3 mouse buttons
(II) PS/2 Mouse: Found x and y relative axes
(II) PS/2 Mouse: Configuring as mouse
(**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) PS/2 Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Mouse: (accel) filter chain progression: 2.00
(**) PS/2 Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2 Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device USB Optical Mouse
(**) USB Optical Mouse: always reports core events
(**) USB Optical Mouse: Device: "/dev/input/event3"
(II) USB Optical Mouse: Found 3 mouse buttons
(II) USB Optical Mouse: Found x and y relative axes
(II) USB Optical Mouse: Found scroll wheel(s)
(II) USB Optical Mouse: Configuring as mouse
(**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) USB Optical Mouse: (accel) keeping acceleration scheme 1
(**) USB Optical Mouse: (accel) filter chain progression: 2.00
(**) USB Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) USB Optical Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "synaptics"
(II) PS/2 Mouse: Close
(II) UnloadModule: "evdev"
(II) USB Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(II) NVIDIA(0): DPMS enabled
(==) RandR enabled
(II) Initializing extension GLX
(EE) XKB: No components provided for device Virtual core keyboard
(WW) Couldn't load XKB keymap, falling back to pre-XKB keymap
[config/dbus] couldn't register object path
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event2"
(II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
(II) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
(II) AlpsPS/2 ALPS GlidePoint: finger width range 0 - 0
(II) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
(--) AlpsPS/2 ALPS GlidePoint: touchpad found
(**) AlpsPS/2 ALPS GlidePoint: always reports core events
(**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
(**) AlpsPS/2 ALPS GlidePoint: (accel) filter chain progression: 2.00
(**) AlpsPS/2 ALPS GlidePoint: (accel) filter stage 0: 20.00 ms
(**) AlpsPS/2 ALPS GlidePoint: (accel) set acceleration profile 0
(--) AlpsPS/2 ALPS GlidePoint: touchpad found
(II) config/hal: Adding input device PS/2 Mouse
(**) PS/2 Mouse: always reports core events
(**) PS/2 Mouse: Device: "/dev/input/event1"
(II) PS/2 Mouse: Found 3 mouse buttons
(II) PS/2 Mouse: Found x and y relative axes
(II) PS/2 Mouse: Configuring as mouse
(**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) PS/2 Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Mouse: (accel) filter chain progression: 2.00
(**) PS/2 Mouse: (accel) filter stage 0: 20.00 ms
(**) PS/2 Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device USB Optical Mouse
(**) USB Optical Mouse: always reports core events
(**) USB Optical Mouse: Device: "/dev/input/event3"
(II) USB Optical Mouse: Found 3 mouse buttons
(II) USB Optical Mouse: Found x and y relative axes
(II) USB Optical Mouse: Found scroll wheel(s)
(II) USB Optical Mouse: Configuring as mouse
(**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) USB Optical Mouse: (accel) keeping acceleration scheme 1
(**) USB Optical Mouse: (accel) filter chain progression: 2.00
(**) USB Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) USB Optical Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
[-- Attachment #4: xorg.txt --]
[-- Type: text/plain, Size: 1522 bytes --]
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
EndSection
Section "ServerFlags"
Option "AllowEmptyInput" "true"
Option "AutoAddDevices" "true"
Option "AutoEnableDevices" "true"
EndSection
Section "Files"
ModulePath "/usr/lib64/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "extmod"
Load "dri"
Load "record"
Load "dbe"
Load "dri2"
Load "glx"
Load "wfb"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "Quadro NVS 135M"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
^ permalink raw reply [flat|nested] 5+ messages in thread