Linux version 2.6.30-gentoo-r1-hunghien (root@hunghien) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.2, pie-10.1.5) ) #5 SMP Tue Jun 23 19:12:00 MDT 2009 Command line: root=/dev/sda4 video=uvesafb:1280x800-32,mtrr:3,ywrap splash=verbose,fadein,theme:natural_gentoo console=tty1 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe5a800 (usable) BIOS-e820: 000000007fe5a800 - 0000000080000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0x7fe5a max_arch_pfn = 0x100000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07FF00000 mask FFFF00000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled init_memory_mapping: 0000000000000000-000000007fe5a000 0000000000 - 007fe00000 page 2M 007fe00000 - 007fe5a000 page 4k kernel direct mapping tables up to 7fe5a000 @ 8000-c000 ACPI: RSDP 00000000000fbb10 00024 (v02 DELL ) ACPI: XSDT 000000007fe5d200 00064 (v01 DELL M08 27D80B18 ASL 00000061) ACPI: FACP 000000007fe5d09c 000F4 (v04 DELL M08 27D80B18 ASL 00000061) ACPI: DSDT 000000007fe5d800 06114 (v02 INT430 SYSFexxx 00001001 INTL 20050624) ACPI: FACS 000000007fe6c000 00040 ACPI: HPET 000000007fe5d300 00038 (v01 DELL M08 00000001 ASL 00000061) ACPI: APIC 000000007fe5d400 00068 (v01 DELL M08 27D80B18 ASL 00000047) ACPI: ASF! 000000007fe5d000 0007E (v32 DELL M08 27D80B18 ASL 00000061) ACPI: MCFG 000000007fe5d3c0 0003E (v16 DELL M08 27D80B18 ASL 00000061) ACPI: TCPA 000000007fe5d700 00032 (v01 00000000 ASL 00000000) ACPI: SLIC 000000007fe5d49c 00176 (v01 DELL M08 27D80B18 ASL 00000061) ACPI: SSDT 000000007fe5b9c0 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000007fe5a000 Bootmem setup node 0 0000000000000000-000000007fe5a000 NODE_DATA [0000000000001000 - 0000000000004fff] bootmap [000000000000a000 - 0000000000019fcf] pages 10 (6 early reservations) ==> bootmem [0000000000 - 007fe5a000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000afb3d8] TEXT DATA BSS ==> [0000200000 - 0000afb3d8] #3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #4 [0000afc000 - 0000afc1ec] BRK ==> [0000afc000 - 0000afc1ec] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007fe5a On node 0 totalpages: 523769 DMA zone: 56 pages used for memmap DMA zone: 2401 pages reserved DMA zone: 1542 pages, LIFO batch:0 DMA32 zone: 7107 pages used for memmap DMA32 zone: 512663 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:78000000) NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages at ffff880001010000, static data 69728 bytes Built 1 zonelists in Node order, mobility grouping on. Total pages: 514205 Policy zone: DMA32 Kernel command line: root=/dev/sda4 video=uvesafb:1280x800-32,mtrr:3,ywrap splash=verbose,fadein,theme:natural_gentoo console=tty1 Initializing CPU#0 NR_IRQS:320 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 1994.405 MHz processor. Console: colour VGA+ 80x25 console [tty1] enabled Checking aperture... No AGP bridge found Memory: 2056576k/2095464k available (4985k kernel code, 388k absent, 38500k reserved, 2656k data, 648k init) hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 3988.81 BogoMIPS (lpj=7977620) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20090320 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3988.85 BogoMIPS (lpj=7977705) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (7977.66 BogoMIPS). net_namespace: 960 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in E820 PCI: Using MMCONFIG at f8000000 - fbffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 000000007fe6c080 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: ACPI Dock Station Driver: 3 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Scanning bus 0000:00 pci 0000:00:00.0: found [8086:2a00] class 000600 header type 00 pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1aa pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x2b pci 0000:00:01.0: found [8086:2a01] class 000604 header type 01 pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x1aa pci 0000:00:01.0: calling pci_fixup_transparent_bridge+0x0/0x2b pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: found [8086:2834] class 000c03 header type 00 pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f] pci 0000:00:1a.0: calling quirk_resource_alignment+0x0/0x1aa pci 0000:00:1a.0: calling pci_fixup_transparent_bridge+0x0/0x2b pci 0000:00:1a.1: found [8086:2835] class 000c03 header type 00 pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f] pci 0000:00:1a.1: calling quirk_resource_alignment+0x0/0x1aa pci 0000:00:1a.1: calling pci_fixup_transparent_bridge+0x0/0x2b pci 0000:00:1a.7: found [8086:283a] class 000c03 header type 00 pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff] pci 0000:00:1a.7: calling quirk_resource_alignment+0x0/0x1aa pci 0000:00:1a.7: calling pci_fixup_transparent_bridge+0x0/0x2b pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: found [8086:284b] class 000403 header type 00 pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6ffc000-0xf6ffffff] pci 0000:00:1b.0: calling quirk_resource_alignment+0x0/0x1aa pci 0000:00:1b.0: calling pci_fixup_transparent_bridge+0x0/0x2b pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: found [8086:283f] class 000604 header type 01 pci 0000:00:1c.0: calling quirk_resource_alignment+0x0/0x1aa pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x2b pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: found [8086:2841] class 000604 header type 01 pci 0000:00:1c.1: calling quirk_resource_alignment+0x0/0x1aa pci 0000:00:1c.1: calling pci_fixup_transparent_bridge+0x0/0x2b pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.5: found [8086:2849] class 000604 header type 01 pci 0000:00:1c.5: calling quirk_resource_alignment+0x0/0x1aa pci 0000:00:1c.5: calling pci_fixup_transparent_bridge+0x0/0x2b pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: found [8086:2830] class 000c03 header type 00 pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f] pci 0000:00:1d.0: calling quirk_resource_alignment+0x0/0x1aa pci 0000:00:1d.0: calling pci_fixup_transparent_bridge+0x0/0x2b pci 0000:00:1d.1: found [8086:2831] class 000c03 header type 00 pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f] pci 0000:00:1d.1: calling quirk_resource_alignment+0x0/0x1aa pci 0000:00:1d.1: calling pci_fixup_transparent_bridge+0x0/0x2b pci 0000:00:1d.2: found [8086:2832] class 000c03 header type 00 pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f] pci 0000:00:1d.2: calling quirk_resource_alignment+0x0/0x1aa pci 0000:00:1d.2: calling pci_fixup_transparent_bridge+0x0/0x2b pci 0000:00:1d.7: found [8086:2836] class 000c03 header type 00 pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff] pci 0000:00:1d.7: calling quirk_resource_alignment+0x0/0x1aa pci 0000:00:1d.7: calling pci_fixup_transparent_bridge+0x0/0x2b pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: found [8086:2448] class 000604 header type 01 pci 0000:00:1e.0: calling quirk_resource_alignment+0x0/0x1aa pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x2b pci 0000:00:1f.0: found [8086:2815] class 000601 header type 00 pci 0000:00:1f.0: calling ich_force_enable_hpet+0x0/0x200 pci 0000:00:1f.0: calling quirk_ich7_lpc+0x0/0x5a pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) pci 0000:00:1f.0: calling quirk_resource_alignment+0x0/0x1aa pci 0000:00:1f.0: calling pci_fixup_transparent_bridge+0x0/0x2b pci 0000:00:1f.1: found [8086:2850] class 000101 header type 00 pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf] pci 0000:00:1f.1: calling quirk_resource_alignment+0x0/0x1aa pci 0000:00:1f.1: calling pci_fixup_transparent_bridge+0x0/0x2b pci 0000:00:1f.2: found [8086:2829] class 000106 header type 00 pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7] pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb] pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7] pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb] pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eff] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf6ffb800-0xf6ffbfff] pci 0000:00:1f.2: calling quirk_resource_alignment+0x0/0x1aa pci 0000:00:1f.2: calling pci_fixup_transparent_bridge+0x0/0x2b pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: found [8086:283e] class 000c05 header type 00 pci 0000:00:1f.3: reg 10 32bit mmio: [0xf6ffb700-0xf6ffb7ff] pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df] pci 0000:00:1f.3: calling quirk_resource_alignment+0x0/0x1aa pci 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x2b PCI: Fixups for bus 0000:00 pci 0000:00:01.0: scanning behind bridge, config 010100, pass 0 PCI: Scanning bus 0000:01 pci 0000:01:00.0: found [10de:042b] class 000300 header type 00 pci 0000:01:00.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff] pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf2000000-0xf3ffffff] pci 0000:01:00.0: reg 24 io port: [0xef00-0xef7f] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x1aa PCI: Fixups for bus 0000:01 pci 0000:00:01.0: bridge io port: [0xe000-0xefff] pci 0000:00:01.0: bridge 32bit mmio: [0xf2000000-0xf6efffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] PCI: Bus scan for 0000:01 returning with max=01 pci 0000:00:1c.0: scanning behind bridge, config 0b0b00, pass 0 PCI: Scanning bus 0000:0b PCI: Fixups for bus 0000:0b PCI: Bus scan for 0000:0b returning with max=0b pci 0000:00:1c.1: scanning behind bridge, config 0c0c00, pass 0 PCI: Scanning bus 0000:0c pci 0000:0c:00.0: found [8086:4229] class 000280 header type 00 pci 0000:0c:00.0: reg 10 64bit mmio: [0xf1ffe000-0xf1ffffff] pci 0000:0c:00.0: calling quirk_resource_alignment+0x0/0x1aa pci 0000:0c:00.0: calling pci_fixup_transparent_bridge+0x0/0x2b pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold pci 0000:0c:00.0: PME# disabled PCI: Fixups for bus 0000:0c pci 0000:00:1c.1: bridge 32bit mmio: [0xf1f00000-0xf1ffffff] PCI: Bus scan for 0000:0c returning with max=0c pci 0000:00:1c.5: scanning behind bridge, config 090900, pass 0 PCI: Scanning bus 0000:09 pci 0000:09:00.0: found [14e4:1673] class 000200 header type 00 pci 0000:09:00.0: reg 10 64bit mmio: [0xf1ef0000-0xf1efffff] pci 0000:09:00.0: calling quirk_resource_alignment+0x0/0x1aa pci 0000:09:00.0: PME# supported from D3hot D3cold pci 0000:09:00.0: PME# disabled PCI: Fixups for bus 0000:09 pci 0000:00:1c.5: bridge 32bit mmio: [0xf1e00000-0xf1efffff] PCI: Bus scan for 0000:09 returning with max=09 pci 0000:00:1e.0: scanning behind bridge, config 040300, pass 0 PCI: Scanning bus 0000:03 pci 0000:03:01.0: found [1217:7135] class 000607 header type 02 pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:03:01.0: calling quirk_resource_alignment+0x0/0x1aa pci 0000:03:01.0: supports D1 D2 pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.0: PME# disabled pci 0000:03:01.4: found [1217:00f7] class 000c00 header type 00 pci 0000:03:01.4: reg 10 32bit mmio: [0xf1dff000-0xf1dfffff] pci 0000:03:01.4: reg 14 32bit mmio: [0xf1dfe800-0xf1dfefff] pci 0000:03:01.4: calling quirk_resource_alignment+0x0/0x1aa pci 0000:03:01.4: supports D1 D2 pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.4: PME# disabled PCI: Fixups for bus 0000:03 pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xf1d00000-0xf1dfffff] pci 0000:03:01.0: scanning behind bridge, config 040403, pass 0 pci 0000:03:01.0: scanning behind bridge, config 040403, pass 1 PCI: Bus #04 (-#07) is partially hidden behind transparent bridge #03 (-#04) PCI: Bus scan for 0000:03 returning with max=07 pci 0000:00:01.0: scanning behind bridge, config 010100, pass 1 pci 0000:00:1c.0: scanning behind bridge, config 0b0b00, pass 1 pci 0000:00:1c.1: scanning behind bridge, config 0c0c00, pass 1 pci 0000:00:1c.5: scanning behind bridge, config 090900, pass 1 pci 0000:00:1e.0: scanning behind bridge, config 040300, pass 1 PCI: Bus scan for 0000:00 returning with max=0c ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *5 ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3 ACPI: PCI Interrupt Link [LNKC] (IRQs 9 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *9 10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:0b: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0b: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0c: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0c: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0c: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp 00:0c: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:05: ioport range 0xc80-0xcaf has been reserved system 00:05: ioport range 0xcc0-0xcff could not be reserved system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved system 00:0a: ioport range 0xcb0-0xcbb has been reserved system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved system 00:0b: ioport range 0x900-0x97f has been reserved system 00:0b: ioport range 0x4d0-0x4d1 has been reserved system 00:0c: ioport range 0xf400-0xf4fe has been reserved system 00:0c: ioport range 0x1080-0x10bf has been reserved system 00:0c: ioport range 0x10c0-0x10df has been reserved system 00:0c: ioport range 0x809-0x809 has been reserved system 00:0d: iomem range 0x0-0x9efff could not be reserved system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xcffff has been reserved system 00:0d: iomem range 0xe0000-0xfffff has been reserved system 00:0d: iomem range 0x100000-0x7fe5a7ff could not be reserved system 00:0d: iomem range 0x7fe5a800-0x7fefffff has been reserved system 00:0d: iomem range 0x7ff00000-0x7fffffff has been reserved system 00:0d: iomem range 0x7ff00000-0x806fffff could not be reserved system 00:0d: iomem range 0xffe00000-0xffffffff has been reserved system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved system 00:0d: iomem range 0xfec00000-0xfec0ffff has been reserved system 00:0d: iomem range 0xfee00000-0xfee0ffff has been reserved system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved system 00:0d: iomem range 0xfeda0000-0xfeda3fff has been reserved system 00:0d: iomem range 0xfeda4000-0xfeda4fff has been reserved system 00:0d: iomem range 0xfeda5000-0xfeda5fff has been reserved system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved system 00:0d: iomem range 0xfed18000-0xfed1bfff has been reserved system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved pci 0000:01:00.0: BAR 6: got res [0xf4000000-0xf401ffff] bus [0xf4000000-0xf401ffff] flags 0x27200 pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xe000-0xefff pci 0000:00:01.0: MEM window: 0xf2000000-0xf6efffff pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xf1f00000-0xf1ffffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09 pci 0000:00:1c.5: IO window: disabled pci 0000:00:1c.5: MEM window: 0xf1e00000-0xf1efffff pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:03:01.0: BAR 0: got res [0xf1d00000-0xf1d00fff] bus [0xf1d00000-0xf1d00fff] flags 0x20200 pci 0000:03:01.0: BAR 0: moved to bus [0xf1d00000-0xf1d00fff] flags 0x20200 pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04 pci 0000:03:01.0: IO window: 0x002000-0x0020ff pci 0000:03:01.0: IO window: 0x002400-0x0024ff pci 0000:03:01.0: PREFETCH window: 0x88000000-0x8bffffff pci 0000:03:01.0: MEM window: 0x8c000000-0x8fffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1e.0: IO window: 0x2000-0x2fff pci 0000:00:1e.0: MEM window: 0xf1d00000-0xf1dfffff pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:03:01.0: enabling device (0000 -> 0003) pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 pci 0000:03:01.0: enabling bus mastering pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] pci_bus 0000:01: resource 1 mem: [0xf2000000-0xf6efffff] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] pci_bus 0000:0c: resource 1 mem: [0xf1f00000-0xf1ffffff] pci_bus 0000:09: resource 1 mem: [0xf1e00000-0xf1efffff] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff] pci_bus 0000:03: resource 1 mem: [0xf1d00000-0xf1dfffff] pci_bus 0000:03: resource 2 pref mem [0x88000000-0x8bffffff] pci_bus 0000:03: resource 3 io: [0x00-0xffff] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:04: resource 0 io: [0x2000-0x20ff] pci_bus 0000:04: resource 1 io: [0x2400-0x24ff] pci_bus 0000:04: resource 2 pref mem [0x88000000-0x8bffffff] pci_bus 0000:04: resource 3 mem: [0x8c000000-0x8fffffff] NET: Registered protocol family 2 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Kprobe smoke test started Kprobe smoke test passed successfully HugeTLB registered 2 MB page size, pre-allocated 0 pages fuse init (API version 7.11) msgmni has been set to 4016 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x1e0 pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:00:00.0: calling pci_fixup_video+0x0/0xbb pci 0000:00:01.0: calling quirk_e100_interrupt+0x0/0x1e0 pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:00:01.0: calling pci_fixup_video+0x0/0xbb pci 0000:00:1a.0: calling quirk_e100_interrupt+0x0/0x1e0 pci 0000:00:1a.0: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:00:1a.0: calling pci_fixup_video+0x0/0xbb pci 0000:00:1a.1: calling quirk_e100_interrupt+0x0/0x1e0 pci 0000:00:1a.1: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:00:1a.1: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:00:1a.1: calling pci_fixup_video+0x0/0xbb pci 0000:00:1a.7: calling quirk_e100_interrupt+0x0/0x1e0 pci 0000:00:1a.7: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:00:1a.7: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:00:1a.7: calling pci_fixup_video+0x0/0xbb pci 0000:00:1b.0: calling quirk_e100_interrupt+0x0/0x1e0 pci 0000:00:1b.0: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:00:1b.0: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:00:1b.0: calling pci_fixup_video+0x0/0xbb pci 0000:00:1c.0: calling quirk_e100_interrupt+0x0/0x1e0 pci 0000:00:1c.0: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:00:1c.0: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:00:1c.0: calling pci_fixup_video+0x0/0xbb pci 0000:00:1c.1: calling quirk_e100_interrupt+0x0/0x1e0 pci 0000:00:1c.1: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:00:1c.1: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:00:1c.1: calling pci_fixup_video+0x0/0xbb pci 0000:00:1c.5: calling quirk_e100_interrupt+0x0/0x1e0 pci 0000:00:1c.5: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:00:1c.5: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:00:1c.5: calling pci_fixup_video+0x0/0xbb pci 0000:00:1d.0: calling quirk_e100_interrupt+0x0/0x1e0 pci 0000:00:1d.0: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:00:1d.0: calling pci_fixup_video+0x0/0xbb pci 0000:00:1d.1: calling quirk_e100_interrupt+0x0/0x1e0 pci 0000:00:1d.1: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:00:1d.1: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:00:1d.1: calling pci_fixup_video+0x0/0xbb pci 0000:00:1d.2: calling quirk_e100_interrupt+0x0/0x1e0 pci 0000:00:1d.2: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:00:1d.2: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:00:1d.2: calling pci_fixup_video+0x0/0xbb pci 0000:00:1d.7: calling quirk_e100_interrupt+0x0/0x1e0 pci 0000:00:1d.7: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:00:1d.7: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:00:1d.7: calling pci_fixup_video+0x0/0xbb pci 0000:00:1e.0: calling quirk_e100_interrupt+0x0/0x1e0 pci 0000:00:1e.0: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:00:1e.0: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:00:1e.0: calling pci_fixup_video+0x0/0xbb pci 0000:00:1f.0: calling quirk_e100_interrupt+0x0/0x1e0 pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:00:1f.0: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:00:1f.0: calling pci_fixup_video+0x0/0xbb pci 0000:00:1f.1: calling quirk_e100_interrupt+0x0/0x1e0 pci 0000:00:1f.1: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:00:1f.1: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:00:1f.1: calling pci_fixup_video+0x0/0xbb pci 0000:00:1f.2: calling quirk_e100_interrupt+0x0/0x1e0 pci 0000:00:1f.2: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:00:1f.2: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:00:1f.2: calling pci_fixup_video+0x0/0xbb pci 0000:00:1f.3: calling quirk_e100_interrupt+0x0/0x1e0 pci 0000:00:1f.3: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:00:1f.3: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:00:1f.3: calling pci_fixup_video+0x0/0xbb pci 0000:01:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x7 pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:01:00.0: calling pci_fixup_video+0x0/0xbb pci 0000:01:00.0: Boot video device pci 0000:0c:00.0: calling quirk_e100_interrupt+0x0/0x1e0 pci 0000:0c:00.0: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:0c:00.0: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:0c:00.0: calling pci_fixup_video+0x0/0xbb pci 0000:09:00.0: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:09:00.0: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:09:00.0: calling pci_fixup_video+0x0/0xbb pci 0000:03:01.0: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:03:01.0: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:03:01.0: calling pci_fixup_video+0x0/0xbb pci 0000:03:01.4: calling quirk_cardbus_legacy+0x0/0x30 pci 0000:03:01.4: calling quirk_usb_early_handoff+0x0/0x417 pci 0000:03:01.4: calling pci_fixup_video+0x0/0xbb pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X pcieport-driver 0000:00:1c.5: setting latency timer to 64 Real Time Clock Driver v1.12b i8k: unable to get SMM BIOS version Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org) Linux agpgart interface v0.103 ipmi message handler version 39.2 uvesafb: NVIDIA Corporation, G86 Board - briscoe0, Chip Rev , OEM: NVIDIA, VBE v3.0 uvesafb: VBIOS/hardware doesn't support DDC transfers uvesafb: no monitor limits have been set, default refresh rate will be used uvesafb: scrolling: redraw Console: switching to colour frame buffer device 160x50 uvesafb: framebuffer at 0xf3000000, mapped to 0xffffc20004980000, using 8000k, total 14336k fb0: VESA VGA frame buffer device ACPI: AC Adapter [AC] (on-line) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) floppy0: no floppy controllers found brd: module loaded loop: module loaded Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ahci 0000:00:1f.2: irq 28 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffb900 irq 28 ata2: DUMMY ata3: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffba00 irq 28 ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi3 : ata_piix scsi4 : ata_piix ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 tg3.c:v3.98 (February 25, 2009) tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 tg3 0000:09:00.0: setting latency timer to 64 tg3 0000:09:00.0: PME# disabled eth0: Tigon3 [partno(BCM95755m) rev a002] (PCI Express) MAC address 00:18:8b:db:3c:56 eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1]) eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky console [netcon0] enabled netconsole: network logging started Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.07 ohci1394 0000:03:01.4: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[f1dff000-f1dff7ff] Max Packet=[2048] IR/IT contexts=[8/8] ieee1394: raw1394: /dev/raw1394 device initialized ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.30-gentoo-r1-hunghien ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 ata4.00: ATAPI: TEAC DVD-ROM DV28EV, D.AD, max UDMA/33 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.30-gentoo-r1-hunghien ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller ata4.00: configured for UDMA/33 uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.30-gentoo-r1-hunghien uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.30-gentoo-r1-hunghien uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.30-gentoo-r1-hunghien uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.30-gentoo-r1-hunghien uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.30-gentoo-r1-hunghien uhci_hcd usb usb7: SerialNumber: 0000:00:1d.2 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver ums-alauda usbcore: registered new interface driver ums-datafab usbcore: registered new interface driver ums-freecom usbcore: registered new interface driver ums-isd200 usbcore: registered new interface driver ums-jumpshot usbcore: registered new interface driver ums-karma usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver ums-sddr55 usbcore: registered new interface driver ums-usbat PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice Linux telephony interface: v1.00 cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 usbhid: v2.6:USB HID core driver oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' registered taskstats version 1 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata1.00: ATA-7: SAMSUNG HM060HI, YD100-15, max UDMA7 ata1.00: 117210240 sectors, multi 8: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM060HI YD10 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 3:0:0:0: CD-ROM TEAC DVD-ROM DV28EV D.AD PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sr 3:0:0:0: Attached scsi generic sg1 type 5 ata5: port disabled. ignoring. usb 5-1: new low speed USB device using uhci_hcd and address 2 input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input1 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2 usb 5-1: New USB device found, idVendor=0461, idProduct=4d15 usb 5-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 usb 5-1: Product: USB Optical Mouse usb 5-1: configuration #1 chosen from 1 choice input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input3 generic-usb 0003:0461:4D15.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1/input0 sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk usb 7-1: new full speed USB device using uhci_hcd and address 2 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:4. Freeing unused kernel memory: 648k freed ieee1394: Host added: ID:BUS[0-00:1023] GUID[384fc00025499581] usb 7-1: New USB device found, idVendor=0b97, idProduct=7761 usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 7-1: configuration #1 chosen from 1 choice hub 7-1:1.0: USB hub found hub 7-1:1.0: 4 ports detected usb 7-1.2: new full speed USB device using uhci_hcd and address 3 usb 7-1.2: New USB device found, idVendor=0b97, idProduct=7772 usb 7-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 7-1.2: Product: O2Micro CCID SC Reader usb 7-1.2: Manufacturer: O2 usb 7-1.2: configuration #1 chosen from 1 choice udev: starting version 141 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM] (53 C) ACPI: SSDT 000000007fe5c4f6 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT 000000007fe5be8c 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 000000007fe5c77c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) ACPI: SSDT 000000007fe5c471 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 ACPI: Power Button [PBTN] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6 ACPI: Sleep Button [SBTN] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kd iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:0c:00.0: setting latency timer to 64 iwlagn 0000:0c:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 iwlagn 0000:0c:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels iwlagn 0000:0c:00.0: irq 29 for MSI/MSI-X dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) phy0: Selected rate control algorithm 'iwl-agn-rs' input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:31/device:32/input/input7 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) nvidia: module license 'NVIDIA' taints kernel. Disabling lock debugging due to kernel taint HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 HDA Intel 0000:00:1b.0: setting latency timer to 64 nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidia 0000:01:00.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.60 Mon May 11 15:27:42 PDT 2009 EXT3 FS on sda4, internal journal fbcondecor: console 0 using theme 'natural_gentoo' fbcondecor: switched decor state to 'on' on console 0 fbcondecor: console 1 using theme 'emerge-world' fbcondecor: switched decor state to 'on' on console 1 fbcondecor: console 2 using theme 'natural_gentoo' fbcondecor: switched decor state to 'on' on console 2 fbcondecor: console 3 using theme 'natural_gentoo' fbcondecor: switched decor state to 'on' on console 3 fbcondecor: console 4 using theme 'natural_gentoo' fbcondecor: switched decor state to 'on' on console 4 fbcondecor: console 5 using theme 'natural_gentoo' fbcondecor: switched decor state to 'on' on console 5 tg3 0000:09:00.0: PME# disabled tg3 0000:09:00.0: irq 30 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready Clocksource tsc unstable (delta = -142702371 ns) tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Adding 4096564k swap on /dev/sda3. Priority:-1 extents:1 across:4096564k iwlagn 0000:0c:00.0: firmware: requesting iwlwifi-4965-2.ucode iwlagn 0000:0c:00.0: loaded firmware version 228.61.2.24 Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready eth0: no IPv6 routers present IRQ 16/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs fbcondecor: console 0 using theme 'natural_gentoo' fbcondecor: switched decor state to 'on' on console 0 ata4.00: qc timeout (cmd 0xa0) ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata4.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout) ata4.00: status: { DRDY ERR } ata4: link is slow to respond, please be patient (ready=0) ata4: device not ready (errno=-16), forcing hardreset ata4: soft resetting link ata4.00: configured for UDMA/33 ata4: EH complete ata4.00: qc timeout (cmd 0xa0) ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata4.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout) ata4.00: status: { DRDY ERR } ata4: link is slow to respond, please be patient (ready=0) ata4: device not ready (errno=-16), forcing hardreset ata4: soft resetting link ata4.00: configured for UDMA/33 ata4: EH complete ata4.00: qc timeout (cmd 0xa0) ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata4.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout) ata4.00: status: { DRDY ERR } ata4: link is slow to respond, please be patient (ready=0) ata4: device not ready (errno=-16), forcing hardreset ata4: soft resetting link ata4.00: configured for UDMA/33 ata4: EH complete ata4.00: qc timeout (cmd 0xa0) ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata4.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout) ata4.00: status: { DRDY ERR } ata4: link is slow to respond, please be patient (ready=0) ata4: device not ready (errno=-16), forcing hardreset ata4: soft resetting link ata4.00: configured for UDMA/33 ata4: EH complete ata4.00: qc timeout (cmd 0xa0) ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata4.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout) ata4.00: status: { DRDY ERR } ata4: link is slow to respond, please be patient (ready=0) ata4: device not ready (errno=-16), forcing hardreset ata4: soft resetting link ata4.00: configured for UDMA/33 ata4: EH complete ata4.00: qc timeout (cmd 0xa0) ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata4.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout) ata4.00: status: { DRDY ERR } ata4: link is slow to respond, please be patient (ready=0) ata4: device not ready (errno=-16), forcing hardreset ata4: soft resetting link ata4.00: configured for UDMA/33 ata4: EH complete usb 2-4: new high speed USB device using ehci_hcd and address 4 usb 2-4: New USB device found, idVendor=2001, idProduct=f103 usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 2-4: configuration #1 chosen from 1 choice hub 2-4:1.0: USB hub found hub 2-4:1.0: 7 ports detected ata4.00: qc timeout (cmd 0xa0) ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata4.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout) ata4.00: status: { DRDY ERR } ata4: link is slow to respond, please be patient (ready=0) ata4: device not ready (errno=-16), forcing hardreset ata4: soft resetting link ata4.00: configured for UDMA/33 ata4: EH complete udev: starting version 141 ata4.00: qc timeout (cmd 0xa0) ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata4.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout) ata4.00: status: { DRDY ERR } ata4: link is slow to respond, please be patient (ready=0) ata4: device not ready (errno=-16), forcing hardreset ata4: soft resetting link ata4.00: configured for UDMA/33 ata4: EH complete ata4.00: qc timeout (cmd 0xa0) ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata4.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout) ata4.00: status: { DRDY ERR } ata4: link is slow to respond, please be patient (ready=0) ata4: device not ready (errno=-16), forcing hardreset ata4: soft resetting link ata4.00: configured for UDMA/33 ata4: EH complete