* [gentoo-user] Keyboard sometimes does'nt work
@ 2009-03-04 16:40 mortuusdiabolos
2009-03-05 2:11 ` Mike Kazantsev
0 siblings, 1 reply; 3+ messages in thread
From: mortuusdiabolos @ 2009-03-04 16:40 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 572 bytes --]
Hello,
i've just installed gentoo with kernel 2.6.27-r8 on a fujitsu-siemens
Amilo 1655G laptop and it works perfectly.
But sometimes happens that the keyboard wont be recognised by the kernel
after boot.
So i looked at dmesg output.
Normally the following lines appear, but in non working case they don't:
input: AT Translated Set 2 keyboard as /class/input/input3
input: PS/2 Mouse as /class/input/input4
input: AlpsPS/2 ALPS GlidePoint as /class/input/input5
Maybe somebody had the same problem and can tell me whats wrong.
I've added dmesg output for both cases.
[-- Attachment #2: dmesg_works.txt --]
[-- Type: text/plain, Size: 20685 bytes --]
Linux version 2.6.27-gentoo-r8 (root@gleppi) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #2 Wed Mar 4 13:00:46 CET 2009
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000037ea0000 (usable)
BIOS-e820: 0000000037ea0000 - 0000000037eb2000 (ACPI data)
BIOS-e820: 0000000037eb2000 - 0000000037f00000 (ACPI NVS)
BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x37ea0 max_arch_pfn = 0x100000
kernel direct mapping tables up to 37ea0000 @ 7000-d000
ACPI: RSDP 000F7B40, 0014 (r0 PTLTD )
ACPI: RSDT 37EAC4DB, 0034 (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 37EB1DFF, 0074 (r1 ATI Piranha 6040000 ATI F4240)
ACPI: DSDT 37EAC50F, 58F0 (r1 FIC KR2W 6040000 MSFT 100000E)
ACPI: FACS 37EB2FC0, 0040
ACPI: SSDT 37EB1E73, 00F7 (r1 PTLTD POWERNOW 6040000 LTP 1)
ACPI: APIC 37EB1F6A, 005A (r1 PTLTD APIC 6040000 LTP 0)
ACPI: MCFG 37EB1FC4, 003C (r1 PTLTD MCFG 6040000 LTP 0)
ACPI: DMI detected: Fujitsu Siemens
0MB HIGHMEM available.
894MB LOWMEM available.
mapped low ram: 0 - 37ea0000
low ram: 00000000 - 37ea0000
bootmap 00009000 - 0000ffd4
(6 early reservations) ==> bootmem [0000000000 - 0037ea0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000100000 - 00004e6800] TEXT DATA BSS ==> [0000100000 - 00004e6800]
#2 [00004e7000 - 00004ea000] INIT_PG_TABLE ==> [00004e7000 - 00004ea000]
#3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#4 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
#5 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00037ea0
HighMem 0x00037ea0 -> 0x00037ea0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x00037ea0
On node 0 totalpages: 228927
free_area_init_node: node 0, pgdat c046b4a0, node_mem_map c1000000
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 223170 pages, LIFO batch:31
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227137
Kernel command line: root=/dev/hda7 noapic
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: Using PIT calibration value
Detected 1989.795 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 903476k/916096k available (2497k kernel code, 12004k reserved, 1036k data, 220k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffec000 - 0xfffff000 ( 76 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf7ea0000 ( 894 MB)
.init : 0xc0476000 - 0xc04ad000 ( 220 kB)
.data : 0xc0370725 - 0xc0473954 (1036 kB)
.text : 0xc0100000 - 0xc0370725 (2497 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay loop (skipped), value calculated using timer frequency.. 3979.59 BogoMIPS (lpj=1989795)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Turion(tm) 64 Mobile Technology MT-37 stepping 02
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20080609
ACPI: setting ELCR to 0200 (from 0c98)
net_namespace: 588 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 0
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
PCI: 0000:00:13.0 reg 10 32bit mmio: [c0005000, c0005fff]
PCI: 0000:00:13.1 reg 10 32bit mmio: [c0006000, c0006fff]
PCI: 0000:00:13.2 reg 10 32bit mmio: [c0007000, c0007fff]
pci 0000:00:13.2: supports D1
pci 0000:00:13.2: supports D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
PCI: 0000:00:14.0 reg 10 io port: [84a0, 84af]
PCI: 0000:00:14.0 reg 14 32bit mmio: [c0004800, c0004bff]
PCI: 0000:00:14.1 reg 10 io port: [1f0, 1f7]
PCI: 0000:00:14.1 reg 14 io port: [3f4, 3f7]
PCI: 0000:00:14.1 reg 18 io port: [170, 177]
PCI: 0000:00:14.1 reg 1c io port: [374, 377]
PCI: 0000:00:14.1 reg 20 io port: [84b0, 84bf]
PCI: 0000:00:14.2 reg 10 64bit mmio: [c0000000, c0003fff]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
PCI: 0000:01:05.0 reg 10 32bit mmio: [c8000000, cfffffff]
PCI: 0000:01:05.0 reg 14 io port: [9000, 90ff]
PCI: 0000:01:05.0 reg 18 32bit mmio: [c0100000, c010ffff]
PCI: 0000:01:05.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:01:05.0: supports D1
pci 0000:01:05.0: supports D2
PCI: bridge 0000:00:01.0 io port: [9000, 9fff]
PCI: bridge 0000:00:01.0 32bit mmio: [c0100000, c01fffff]
PCI: bridge 0000:00:01.0 64bit mmio pref: [c8000000, cfffffff]
PCI: bridge 0000:00:04.0 io port: [0, fff]
PCI: bridge 0000:00:04.0 32bit mmio: [0, fffff]
PCI: 0000:08:0a.0 reg 10 32bit mmio: [c0200000, c0201fff]
PCI: 0000:08:0b.0 reg 10 32bit mmio: [c0202000, c02027ff]
PCI: 0000:08:0b.0 reg 14 io port: [a400, a47f]
pci 0000:08:0b.0: supports D2
pci 0000:08:0b.0: PME# supported from D2 D3hot D3cold
pci 0000:08:0b.0: PME# disabled
PCI: 0000:08:0d.0 reg 10 io port: [a000, a0ff]
PCI: 0000:08:0d.0 reg 14 32bit mmio: [c0202800, c02028ff]
pci 0000:08:0d.0: supports D1
pci 0000:08:0d.0: supports D2
pci 0000:08:0d.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:08:0d.0: PME# disabled
pci 0000:00:14.4: transparent bridge
PCI: bridge 0000:00:14.4 io port: [a000, afff]
PCI: bridge 0000:00:14.4 32bit mmio: [c0200000, c02fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *3
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *4
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *7
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
ACPI: Power Resource [FN10] (off)
ACPI: Power Resource [FN11] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x72-0x73) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xb0-0xb1) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x92-0x92) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x220-0x22f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x40b-0x40b) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x4d0-0x4d1) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x4d6-0x4d6) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x530-0x537) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc00-0xc01) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc14-0xc14) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc50-0xc52) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc6c-0xc6c) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc6f-0xc6f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xcd4-0xcd5) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xcd6-0xcd7) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xcd8-0xcdf) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x62-0x62) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x66-0x66) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x68-0x68) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x6a-0x6a) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x6c-0x6c) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x6e-0x6e) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xf40-0xf47) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x87f-0x87f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
dca service started, version 1.4
PCI: Using ACPI for IRQ routing
pci 0000:00:04.0: BAR 7: can't allocate resource
pci 0000:00:04.0: BAR 8: can't allocate resource
NET: Registered protocol family 8
NET: Registered protocol family 20
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:08: ioport range 0x1080-0x1080 has been reserved
system 00:08: ioport range 0x8000-0x805f has been reserved
system 00:08: iomem range 0xd0004c00-0xd0004cff has been reserved
system 00:08: iomem range 0xffb80000-0xffbfffff has been reserved
system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
b43-pci-bridge 0000:08:0a.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
ssb: Sonics Silicon Backplane found on PCI device 0000:08:0a.0
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x9000-0x9fff
pci 0000:00:01.0: MEM window: 0xc0100000-0xc01fffff
pci 0000:00:01.0: PREFETCH window: 0x000000c8000000-0x000000cfffffff
pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
pci 0000:00:04.0: IO window: disabled
pci 0000:00:04.0: MEM window: disabled
pci 0000:00:04.0: PREFETCH window: disabled
pci 0000:00:14.4: PCI bridge, secondary bus 0000:08
pci 0000:00:14.4: IO window: 0xa000-0xafff
pci 0000:00:14.4: MEM window: 0xc0200000-0xc02fffff
pci 0000:00:14.4: PREFETCH window: disabled
pci 0000:00:04.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 io port: [9000, 9fff]
bus: 01 index 1 mmio: [c0100000, c01fffff]
bus: 01 index 2 mmio: [c8000000, cfffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 mmio: [0, fff]
bus: 02 index 1 mmio: [0, fffff]
bus: 02 index 2 mmio: [0, 0]
bus: 02 index 3 mmio: [0, 0]
bus: 08 index 0 io port: [a000, afff]
bus: 08 index 1 mmio: [c0200000, c02fffff]
bus: 08 index 2 mmio: [0, 0]
bus: 08 index 3 io port: [0, ffff]
bus: 08 index 4 mmio: [0, ffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Machine check exception polling timer started.
NTFS driver 2.1.29 [Flags: R/W].
msgmni has been set to 1765
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
pci 0000:01:05.0: Boot video device
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
radeonfb 0000:01:05.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=14.32 MHz (RefDiv=6) Memory=300.00 Mhz, System=200.00 MHz
radeonfb: PLL min 20000 max 40000
Non-DDC laptop panel detected
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-2: unable to read EDID block.
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: SEC
radeonfb: detected LVDS panel size from BIOS: 1280x800
radeondb: BIOS provided dividers will be used
Console: switching to colour frame buffer device 160x50
radeonfb (0000:01:05.0): ATI Radeon 5975 "Yu"
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /class/input/input2
ACPI: Lid Switch [LID]
ACPI: Transitioning device [FN1] to D3
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FN1] (off)
ACPI: Transitioning device [FN2] to D3
fan PNP0C0B:01: registered as cooling_device1
ACPI: Fan [FN2] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device2
ACPI: Processor [CPU0] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (65 C)
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized radeon 1.29.0 20080528 on minor 0
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
nbd: registered device at major 43
fujitsu-laptop: driver 0.4.2 successfully loaded.
8139too Fast Ethernet driver 0.9.28
8139too 0000:08:0d.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
eth0: RealTek RTL8139 at 0xf8816800, 00:40:ca:d9:00:45, IRQ 10
eth0: Identified 8139 chip type 'RTL-8101'
Uniform Multi-Platform E-IDE driver
atiixp 0000:00:14.1: IDE controller (0x1002:0x4376 rev 0x80)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
pci 0000:00:14.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x84b0-0x84b7
ide1: BM-DMA at 0x84b8-0x84bf
Probing IDE interface ide0...
hda: ST9808210A, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
hdc: HL-DT-ST DVD-RW GWA-4082N, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide_generic: I/O resource 0x1F0-0x1F7 not free.
ide_generic: I/O resource 0x170-0x177 not free.
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
aoe: AoE v47 initialised.
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ehci_hcd 0000:00:13.2: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 10, io mem 0xc0007000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usbcore: registered new interface driver libusual
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.17.
ALSA device list:
No soundcards found.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MT-37 processors (1 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xa
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc
powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0xe
powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x16
input: AT Translated Set 2 keyboard as /class/input/input3
Using IPI Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
input: PS/2 Mouse as /class/input/input4
input: AlpsPS/2 ALPS GlidePoint as /class/input/input5
Clocksource tsc unstable (delta = 62992454 ns)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 220k freed
b43-phy0: Broadcom 4318 WLAN found
phy0: Selected rate control algorithm 'pid'
Broadcom 43xx driver loaded [ Features: PR, Firmware-ID: FW13 ]
EXT3 FS on hda7, internal journal
Adding 1502036k swap on /dev/hda6. Priority:-1 extents:1 across:1502036k
input: b43-phy0 as /class/input/input6
firmware: requesting b43/ucode5.fw
firmware: requesting b43/pcm5.fw
firmware: requesting b43/b0g0initvals5.fw
firmware: requesting b43/b0g0bsinitvals5.fw
b43-phy0: Loading firmware version 351.126 (2006-07-29 05:54:02)
b43-phy0 warning: You are using an old firmware image. Support for old firmware will be removed in July 2008.
b43-phy0 warning: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
spurious 8259A interrupt: IRQ7.
b43-phy0: Radio hardware status changed to DISABLED
irq 10: nobody cared (try booting with the "irqpoll" option)
Pid: 3035, comm: iwconfig Not tainted 2.6.27-gentoo-r8 #2
[<c0134fd7>] __report_bad_irq+0x24/0x69
[<c0134fde>] __report_bad_irq+0x2b/0x69
[<c01351c8>] note_interrupt+0x1ac/0x1e0
[<c013489f>] handle_IRQ_event+0x1a/0x3f
[<c013585a>] handle_level_irq+0x63/0x85
[<c0104d67>] do_IRQ+0x48/0x5d
[<c0103863>] common_interrupt+0x23/0x30
[<c013d028>] put_page+0x87/0x8a
[<c0140dbc>] __do_fault+0x293/0x29f
[<c0135878>] handle_level_irq+0x81/0x85
[<c0141ce1>] handle_mm_fault+0x206/0x42c
[<c010ff25>] do_page_fault+0x22c/0x573
[<c0104d6c>] do_IRQ+0x4d/0x5d
[<c010fcf9>] do_page_fault+0x0/0x573
[<c036f9ca>] error_code+0x6a/0x70
=======================
handlers:
[<c029ce6e>] (usb_hcd_irq+0x0/0x52)
Disabling IRQ #10
b43-phy0: Radio turned off by software
eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[-- Attachment #3: dmesg_doesntwork.txt --]
[-- Type: text/plain, Size: 20261 bytes --]
Linux version 2.6.27-gentoo-r8 (root@gleppi) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #2 Wed Mar 4 13:00:46 CET 2009
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000037ea0000 (usable)
BIOS-e820: 0000000037ea0000 - 0000000037eb2000 (ACPI data)
BIOS-e820: 0000000037eb2000 - 0000000037f00000 (ACPI NVS)
BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x37ea0 max_arch_pfn = 0x100000
kernel direct mapping tables up to 37ea0000 @ 7000-d000
ACPI: RSDP 000F7B40, 0014 (r0 PTLTD )
ACPI: RSDT 37EAC4DB, 0034 (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 37EB1DFF, 0074 (r1 ATI Piranha 6040000 ATI F4240)
ACPI: DSDT 37EAC50F, 58F0 (r1 FIC KR2W 6040000 MSFT 100000E)
ACPI: FACS 37EB2FC0, 0040
ACPI: SSDT 37EB1E73, 00F7 (r1 PTLTD POWERNOW 6040000 LTP 1)
ACPI: APIC 37EB1F6A, 005A (r1 PTLTD APIC 6040000 LTP 0)
ACPI: MCFG 37EB1FC4, 003C (r1 PTLTD MCFG 6040000 LTP 0)
ACPI: DMI detected: Fujitsu Siemens
0MB HIGHMEM available.
894MB LOWMEM available.
mapped low ram: 0 - 37ea0000
low ram: 00000000 - 37ea0000
bootmap 00009000 - 0000ffd4
(6 early reservations) ==> bootmem [0000000000 - 0037ea0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000100000 - 00004e6800] TEXT DATA BSS ==> [0000100000 - 00004e6800]
#2 [00004e7000 - 00004ea000] INIT_PG_TABLE ==> [00004e7000 - 00004ea000]
#3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#4 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
#5 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00037ea0
HighMem 0x00037ea0 -> 0x00037ea0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x00037ea0
On node 0 totalpages: 228927
free_area_init_node: node 0, pgdat c046b4a0, node_mem_map c1000000
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 223170 pages, LIFO batch:31
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227137
Kernel command line: root=/dev/hda7
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: Using PIT calibration value
Detected 1989.779 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 903476k/916096k available (2497k kernel code, 12004k reserved, 1036k data, 220k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffec000 - 0xfffff000 ( 76 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf7ea0000 ( 894 MB)
.init : 0xc0476000 - 0xc04ad000 ( 220 kB)
.data : 0xc0370725 - 0xc0473954 (1036 kB)
.text : 0xc0100000 - 0xc0370725 (2497 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay loop (skipped), value calculated using timer frequency.. 3979.55 BogoMIPS (lpj=1989779)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Turion(tm) 64 Mobile Technology MT-37 stepping 02
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20080609
ACPI: setting ELCR to 0200 (from 0c98)
net_namespace: 588 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 0
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
PCI: 0000:00:13.0 reg 10 32bit mmio: [c0005000, c0005fff]
PCI: 0000:00:13.1 reg 10 32bit mmio: [c0006000, c0006fff]
PCI: 0000:00:13.2 reg 10 32bit mmio: [c0007000, c0007fff]
pci 0000:00:13.2: supports D1
pci 0000:00:13.2: supports D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
PCI: 0000:00:14.0 reg 10 io port: [84a0, 84af]
PCI: 0000:00:14.0 reg 14 32bit mmio: [c0004800, c0004bff]
PCI: 0000:00:14.1 reg 10 io port: [1f0, 1f7]
PCI: 0000:00:14.1 reg 14 io port: [3f4, 3f7]
PCI: 0000:00:14.1 reg 18 io port: [170, 177]
PCI: 0000:00:14.1 reg 1c io port: [374, 377]
PCI: 0000:00:14.1 reg 20 io port: [84b0, 84bf]
PCI: 0000:00:14.2 reg 10 64bit mmio: [c0000000, c0003fff]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
PCI: 0000:01:05.0 reg 10 32bit mmio: [c8000000, cfffffff]
PCI: 0000:01:05.0 reg 14 io port: [9000, 90ff]
PCI: 0000:01:05.0 reg 18 32bit mmio: [c0100000, c010ffff]
PCI: 0000:01:05.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:01:05.0: supports D1
pci 0000:01:05.0: supports D2
PCI: bridge 0000:00:01.0 io port: [9000, 9fff]
PCI: bridge 0000:00:01.0 32bit mmio: [c0100000, c01fffff]
PCI: bridge 0000:00:01.0 64bit mmio pref: [c8000000, cfffffff]
PCI: bridge 0000:00:04.0 io port: [0, fff]
PCI: bridge 0000:00:04.0 32bit mmio: [0, fffff]
PCI: 0000:08:0a.0 reg 10 32bit mmio: [c0200000, c0201fff]
PCI: 0000:08:0b.0 reg 10 32bit mmio: [c0202000, c02027ff]
PCI: 0000:08:0b.0 reg 14 io port: [a400, a47f]
pci 0000:08:0b.0: supports D2
pci 0000:08:0b.0: PME# supported from D2 D3hot D3cold
pci 0000:08:0b.0: PME# disabled
PCI: 0000:08:0d.0 reg 10 io port: [a000, a0ff]
PCI: 0000:08:0d.0 reg 14 32bit mmio: [c0202800, c02028ff]
pci 0000:08:0d.0: supports D1
pci 0000:08:0d.0: supports D2
pci 0000:08:0d.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:08:0d.0: PME# disabled
pci 0000:00:14.4: transparent bridge
PCI: bridge 0000:00:14.4 io port: [a000, afff]
PCI: bridge 0000:00:14.4 32bit mmio: [c0200000, c02fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *3
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *4
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *7
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
ACPI: Power Resource [FN10] (off)
ACPI: Power Resource [FN11] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x72-0x73) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xb0-0xb1) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x92-0x92) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x220-0x22f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x40b-0x40b) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x4d0-0x4d1) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x4d6-0x4d6) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x530-0x537) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc00-0xc01) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc14-0xc14) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc50-0xc52) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc6c-0xc6c) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xc6f-0xc6f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xcd4-0xcd5) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xcd6-0xcd7) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xcd8-0xcdf) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x62-0x62) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x66-0x66) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x68-0x68) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x6a-0x6a) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x6c-0x6c) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x6e-0x6e) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xf40-0xf47) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x87f-0x87f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
dca service started, version 1.4
PCI: Using ACPI for IRQ routing
pci 0000:00:04.0: BAR 7: can't allocate resource
pci 0000:00:04.0: BAR 8: can't allocate resource
NET: Registered protocol family 8
NET: Registered protocol family 20
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:08: ioport range 0x1080-0x1080 has been reserved
system 00:08: ioport range 0x8000-0x805f has been reserved
system 00:08: iomem range 0xd0004c00-0xd0004cff has been reserved
system 00:08: iomem range 0xffb80000-0xffbfffff has been reserved
system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
b43-pci-bridge 0000:08:0a.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
ssb: Sonics Silicon Backplane found on PCI device 0000:08:0a.0
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x9000-0x9fff
pci 0000:00:01.0: MEM window: 0xc0100000-0xc01fffff
pci 0000:00:01.0: PREFETCH window: 0x000000c8000000-0x000000cfffffff
pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
pci 0000:00:04.0: IO window: disabled
pci 0000:00:04.0: MEM window: disabled
pci 0000:00:04.0: PREFETCH window: disabled
pci 0000:00:14.4: PCI bridge, secondary bus 0000:08
pci 0000:00:14.4: IO window: 0xa000-0xafff
pci 0000:00:14.4: MEM window: 0xc0200000-0xc02fffff
pci 0000:00:14.4: PREFETCH window: disabled
pci 0000:00:04.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 io port: [9000, 9fff]
bus: 01 index 1 mmio: [c0100000, c01fffff]
bus: 01 index 2 mmio: [c8000000, cfffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 mmio: [0, fff]
bus: 02 index 1 mmio: [0, fffff]
bus: 02 index 2 mmio: [0, 0]
bus: 02 index 3 mmio: [0, 0]
bus: 08 index 0 io port: [a000, afff]
bus: 08 index 1 mmio: [c0200000, c02fffff]
bus: 08 index 2 mmio: [0, 0]
bus: 08 index 3 io port: [0, ffff]
bus: 08 index 4 mmio: [0, ffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Machine check exception polling timer started.
NTFS driver 2.1.29 [Flags: R/W].
msgmni has been set to 1765
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
pci 0000:01:05.0: Boot video device
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
radeonfb 0000:01:05.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=14.32 MHz (RefDiv=6) Memory=300.00 Mhz, System=200.00 MHz
radeonfb: PLL min 20000 max 40000
Non-DDC laptop panel detected
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-2: unable to read EDID block.
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: SEC
radeonfb: detected LVDS panel size from BIOS: 1280x800
radeondb: BIOS provided dividers will be used
Console: switching to colour frame buffer device 160x50
radeonfb (0000:01:05.0): ATI Radeon 5975 "Yu"
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /class/input/input2
ACPI: Lid Switch [LID]
ACPI: Transitioning device [FN1] to D3
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FN1] (off)
ACPI: Transitioning device [FN2] to D3
fan PNP0C0B:01: registered as cooling_device1
ACPI: Fan [FN2] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device2
ACPI: Processor [CPU0] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (63 C)
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized radeon 1.29.0 20080528 on minor 0
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
nbd: registered device at major 43
fujitsu-laptop: driver 0.4.2 successfully loaded.
8139too Fast Ethernet driver 0.9.28
8139too 0000:08:0d.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
eth0: RealTek RTL8139 at 0xf8816800, 00:40:ca:d9:00:45, IRQ 10
eth0: Identified 8139 chip type 'RTL-8101'
Uniform Multi-Platform E-IDE driver
atiixp 0000:00:14.1: IDE controller (0x1002:0x4376 rev 0x80)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
pci 0000:00:14.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x84b0-0x84b7
ide1: BM-DMA at 0x84b8-0x84bf
Probing IDE interface ide0...
hda: ST9808210A, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
hdc: HL-DT-ST DVD-RW GWA-4082N, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide_generic: I/O resource 0x1F0-0x1F7 not free.
ide_generic: I/O resource 0x170-0x177 not free.
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
aoe: AoE v47 initialised.
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ehci_hcd 0000:00:13.2: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 10, io mem 0xc0007000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usbcore: registered new interface driver libusual
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.17.
ALSA device list:
No soundcards found.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MT-37 processors (1 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xa
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc
powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0xe
powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x16
Using IPI Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 220k freed
b43-phy0: Broadcom 4318 WLAN found
phy0: Selected rate control algorithm 'pid'
Broadcom 43xx driver loaded [ Features: PR, Firmware-ID: FW13 ]
EXT3 FS on hda7, internal journal
Adding 1502036k swap on /dev/hda6. Priority:-1 extents:1 across:1502036k
input: b43-phy0 as /class/input/input3
firmware: requesting b43/ucode5.fw
firmware: requesting b43/pcm5.fw
firmware: requesting b43/b0g0initvals5.fw
firmware: requesting b43/b0g0bsinitvals5.fw
b43-phy0: Loading firmware version 351.126 (2006-07-29 05:54:02)
b43-phy0 warning: You are using an old firmware image. Support for old firmware will be removed in July 2008.
b43-phy0 warning: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
b43-phy0: Radio hardware status changed to DISABLED
irq 10: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Not tainted 2.6.27-gentoo-r8 #2
[<c0134fd7>] __report_bad_irq+0x24/0x69
[<c0134fde>] __report_bad_irq+0x2b/0x69
[<c01351c8>] note_interrupt+0x1ac/0x1e0
[<c013489f>] handle_IRQ_event+0x1a/0x3f
[<c013585a>] handle_level_irq+0x63/0x85
[<c0104d67>] do_IRQ+0x48/0x5d
[<c0103863>] common_interrupt+0x23/0x30
[<c0250d69>] acpi_idle_enter_c1+0xa5/0xdd
[<c02baba2>] cpuidle_idle_call+0x49/0x77
[<c01024e0>] cpu_idle+0x41/0x5a
=======================
handlers:
[<c029ce6e>] (usb_hcd_irq+0x0/0x52)
Disabling IRQ #10
b43-phy0: Radio turned off by software
eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [gentoo-user] Keyboard sometimes does'nt work
2009-03-04 16:40 [gentoo-user] Keyboard sometimes does'nt work mortuusdiabolos
@ 2009-03-05 2:11 ` Mike Kazantsev
2009-03-05 6:29 ` mortuusdiabolos
0 siblings, 1 reply; 3+ messages in thread
From: Mike Kazantsev @ 2009-03-05 2:11 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 589 bytes --]
On Wed, 04 Mar 2009 17:40:40 +0100
mortuusdiabolos <mortuusdiabolos@gmail.com> wrote:
> Hello,
> i've just installed gentoo with kernel 2.6.27-r8 on a fujitsu-siemens
> Amilo 1655G laptop and it works perfectly.
> But sometimes happens that the keyboard wont be recognised by the kernel
> after boot.
Prehaps you should add 'irqpoll' to kernel boot options, just like
dmesg suggests?
I've had nic switching off at random with same message, but you seem to
get it in working case as well, so it might be something entirely
unrelated.
--
Mike Kazantsev // fraggod.net
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [gentoo-user] Keyboard sometimes does'nt work
2009-03-05 2:11 ` Mike Kazantsev
@ 2009-03-05 6:29 ` mortuusdiabolos
0 siblings, 0 replies; 3+ messages in thread
From: mortuusdiabolos @ 2009-03-05 6:29 UTC (permalink / raw
To: gentoo-user
Mike Kazantsev schrieb:
> On Wed, 04 Mar 2009 17:40:40 +0100
> mortuusdiabolos <mortuusdiabolos@gmail.com> wrote:
>
>
>> Hello,
>> i've just installed gentoo with kernel 2.6.27-r8 on a fujitsu-siemens
>> Amilo 1655G laptop and it works perfectly.
>> But sometimes happens that the keyboard wont be recognised by the kernel
>> after boot.
>>
>
> Prehaps you should add 'irqpoll' to kernel boot options, just like
> dmesg suggests?
> I've had nic switching off at random with same message, but you seem to
> get it in working case as well, so it might be something entirely
> unrelated.
>
>
OK i'll give it a try. Thanks.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-03-05 6:29 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-03-04 16:40 [gentoo-user] Keyboard sometimes does'nt work mortuusdiabolos
2009-03-05 2:11 ` Mike Kazantsev
2009-03-05 6:29 ` mortuusdiabolos
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox