Linux version 2.6.27-gentoo-r8 (root@gleppi) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #2 Wed Mar 4 13:00:46 CET 2009 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000037ea0000 (usable) BIOS-e820: 0000000037ea0000 - 0000000037eb2000 (ACPI data) BIOS-e820: 0000000037eb2000 - 0000000037f00000 (ACPI NVS) BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x37ea0 max_arch_pfn = 0x100000 kernel direct mapping tables up to 37ea0000 @ 7000-d000 ACPI: RSDP 000F7B40, 0014 (r0 PTLTD ) ACPI: RSDT 37EAC4DB, 0034 (r1 PTLTD RSDT 6040000 LTP 0) ACPI: FACP 37EB1DFF, 0074 (r1 ATI Piranha 6040000 ATI F4240) ACPI: DSDT 37EAC50F, 58F0 (r1 FIC KR2W 6040000 MSFT 100000E) ACPI: FACS 37EB2FC0, 0040 ACPI: SSDT 37EB1E73, 00F7 (r1 PTLTD POWERNOW 6040000 LTP 1) ACPI: APIC 37EB1F6A, 005A (r1 PTLTD APIC 6040000 LTP 0) ACPI: MCFG 37EB1FC4, 003C (r1 PTLTD MCFG 6040000 LTP 0) ACPI: DMI detected: Fujitsu Siemens 0MB HIGHMEM available. 894MB LOWMEM available. mapped low ram: 0 - 37ea0000 low ram: 00000000 - 37ea0000 bootmap 00009000 - 0000ffd4 (6 early reservations) ==> bootmem [0000000000 - 0037ea0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000100000 - 00004e6800] TEXT DATA BSS ==> [0000100000 - 00004e6800] #2 [00004e7000 - 00004ea000] INIT_PG_TABLE ==> [00004e7000 - 00004ea000] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #4 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #5 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00037ea0 HighMem 0x00037ea0 -> 0x00037ea0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x00037ea0 On node 0 totalpages: 228927 free_area_init_node: node 0, pgdat c046b4a0, node_mem_map c1000000 DMA zone: 3967 pages, LIFO batch:0 Normal zone: 223170 pages, LIFO batch:31 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 PM: Registered nosave memory: 00000000000d0000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227137 Kernel command line: root=/dev/hda7 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) TSC: Using PIT calibration value Detected 1989.779 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 903476k/916096k available (2497k kernel code, 12004k reserved, 1036k data, 220k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffec000 - 0xfffff000 ( 76 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf7ea0000 ( 894 MB) .init : 0xc0476000 - 0xc04ad000 ( 220 kB) .data : 0xc0370725 - 0xc0473954 (1036 kB) .text : 0xc0100000 - 0xc0370725 (2497 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay loop (skipped), value calculated using timer frequency.. 3979.55 BogoMIPS (lpj=1989779) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Turion(tm) 64 Mobile Technology MT-37 stepping 02 Checking 'hlt' instruction... OK. Freeing SMP alternatives: 0k freed ACPI: Core revision 20080609 ACPI: setting ELCR to 0200 (from 0c98) net_namespace: 588 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 0 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled PCI: 0000:00:13.0 reg 10 32bit mmio: [c0005000, c0005fff] PCI: 0000:00:13.1 reg 10 32bit mmio: [c0006000, c0006fff] PCI: 0000:00:13.2 reg 10 32bit mmio: [c0007000, c0007fff] pci 0000:00:13.2: supports D1 pci 0000:00:13.2: supports D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled PCI: 0000:00:14.0 reg 10 io port: [84a0, 84af] PCI: 0000:00:14.0 reg 14 32bit mmio: [c0004800, c0004bff] PCI: 0000:00:14.1 reg 10 io port: [1f0, 1f7] PCI: 0000:00:14.1 reg 14 io port: [3f4, 3f7] PCI: 0000:00:14.1 reg 18 io port: [170, 177] PCI: 0000:00:14.1 reg 1c io port: [374, 377] PCI: 0000:00:14.1 reg 20 io port: [84b0, 84bf] PCI: 0000:00:14.2 reg 10 64bit mmio: [c0000000, c0003fff] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled PCI: 0000:01:05.0 reg 10 32bit mmio: [c8000000, cfffffff] PCI: 0000:01:05.0 reg 14 io port: [9000, 90ff] PCI: 0000:01:05.0 reg 18 32bit mmio: [c0100000, c010ffff] PCI: 0000:01:05.0 reg 30 32bit mmio: [0, 1ffff] pci 0000:01:05.0: supports D1 pci 0000:01:05.0: supports D2 PCI: bridge 0000:00:01.0 io port: [9000, 9fff] PCI: bridge 0000:00:01.0 32bit mmio: [c0100000, c01fffff] PCI: bridge 0000:00:01.0 64bit mmio pref: [c8000000, cfffffff] PCI: bridge 0000:00:04.0 io port: [0, fff] PCI: bridge 0000:00:04.0 32bit mmio: [0, fffff] PCI: 0000:08:0a.0 reg 10 32bit mmio: [c0200000, c0201fff] PCI: 0000:08:0b.0 reg 10 32bit mmio: [c0202000, c02027ff] PCI: 0000:08:0b.0 reg 14 io port: [a400, a47f] pci 0000:08:0b.0: supports D2 pci 0000:08:0b.0: PME# supported from D2 D3hot D3cold pci 0000:08:0b.0: PME# disabled PCI: 0000:08:0d.0 reg 10 io port: [a000, a0ff] PCI: 0000:08:0d.0 reg 14 32bit mmio: [c0202800, c02028ff] pci 0000:08:0d.0: supports D1 pci 0000:08:0d.0: supports D2 pci 0000:08:0d.0: PME# supported from D1 D2 D3hot D3cold pci 0000:08:0d.0: PME# disabled pci 0000:00:14.4: transparent bridge PCI: bridge 0000:00:14.4 io port: [a000, afff] PCI: bridge 0000:00:14.4 32bit mmio: [c0200000, c02fffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *3 ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *4 ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *7 ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0 ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11) ACPI: Power Resource [FN10] (off) ACPI: Power Resource [FN11] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0x72-0x73) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0xb0-0xb1) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0x92-0x92) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0x220-0x22f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0x40b-0x40b) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0x4d0-0x4d1) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0x4d6-0x4d6) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0x530-0x537) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0xc00-0xc01) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0xc14-0xc14) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0xc50-0xc52) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0xc6c-0xc6c) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0xc6f-0xc6f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0xcd4-0xcd5) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0xcd6-0xcd7) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0xcd8-0xcdf) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0x62-0x62) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0x66-0x66) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0x68-0x68) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0x6a-0x6a) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0x6c-0x6c) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0x6e-0x6e) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0xf40-0xf47) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:08: io resource (0x87f-0x87f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb dca service started, version 1.4 PCI: Using ACPI for IRQ routing pci 0000:00:04.0: BAR 7: can't allocate resource pci 0000:00:04.0: BAR 8: can't allocate resource NET: Registered protocol family 8 NET: Registered protocol family 20 system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved system 00:08: ioport range 0x1080-0x1080 has been reserved system 00:08: ioport range 0x8000-0x805f has been reserved system 00:08: iomem range 0xd0004c00-0xd0004cff has been reserved system 00:08: iomem range 0xffb80000-0xffbfffff has been reserved system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered b43-pci-bridge 0000:08:0a.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 ssb: Sonics Silicon Backplane found on PCI device 0000:08:0a.0 pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x9000-0x9fff pci 0000:00:01.0: MEM window: 0xc0100000-0xc01fffff pci 0000:00:01.0: PREFETCH window: 0x000000c8000000-0x000000cfffffff pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 pci 0000:00:04.0: IO window: disabled pci 0000:00:04.0: MEM window: disabled pci 0000:00:04.0: PREFETCH window: disabled pci 0000:00:14.4: PCI bridge, secondary bus 0000:08 pci 0000:00:14.4: IO window: 0xa000-0xafff pci 0000:00:14.4: MEM window: 0xc0200000-0xc02fffff pci 0000:00:14.4: PREFETCH window: disabled pci 0000:00:04.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffff] bus: 01 index 0 io port: [9000, 9fff] bus: 01 index 1 mmio: [c0100000, c01fffff] bus: 01 index 2 mmio: [c8000000, cfffffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 mmio: [0, fff] bus: 02 index 1 mmio: [0, fffff] bus: 02 index 2 mmio: [0, 0] bus: 02 index 3 mmio: [0, 0] bus: 08 index 0 io port: [a000, afff] bus: 08 index 1 mmio: [c0200000, c02fffff] bus: 08 index 2 mmio: [0, 0] bus: 08 index 3 io port: [0, ffff] bus: 08 index 4 mmio: [0, ffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Machine check exception polling timer started. NTFS driver 2.1.29 [Flags: R/W]. msgmni has been set to 1765 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered (default) pci 0000:01:05.0: Boot video device Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.103 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered radeonfb 0000:01:05.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 radeonfb: Retrieved PLL infos from BIOS radeonfb: Reference=14.32 MHz (RefDiv=6) Memory=300.00 Mhz, System=200.00 MHz radeonfb: PLL min 20000 max 40000 Non-DDC laptop panel detected i2c-adapter i2c-2: unable to read EDID block. i2c-adapter i2c-2: unable to read EDID block. i2c-adapter i2c-2: unable to read EDID block. radeonfb: Monitor 1 type LCD found radeonfb: Monitor 2 type no found radeonfb: panel ID string: SEC radeonfb: detected LVDS panel size from BIOS: 1280x800 radeondb: BIOS provided dividers will be used Console: switching to colour frame buffer device 160x50 radeonfb (0000:01:05.0): ATI Radeon 5975 "Yu" ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] input: Lid Switch as /class/input/input2 ACPI: Lid Switch [LID] ACPI: Transitioning device [FN1] to D3 fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FN1] (off) ACPI: Transitioning device [FN2] to D3 fan PNP0C0B:01: registered as cooling_device1 ACPI: Fan [FN2] (off) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:00: registered as cooling_device2 ACPI: Processor [CPU0] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (63 C) [drm] Initialized drm 1.1.0 20060810 [drm] Initialized radeon 1.29.0 20080528 on minor 0 Serial: 8250/16550 driver4 ports, IRQ sharing enabled brd: module loaded loop: module loaded nbd: registered device at major 43 fujitsu-laptop: driver 0.4.2 successfully loaded. 8139too Fast Ethernet driver 0.9.28 8139too 0000:08:0d.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 eth0: RealTek RTL8139 at 0xf8816800, 00:40:ca:d9:00:45, IRQ 10 eth0: Identified 8139 chip type 'RTL-8101' Uniform Multi-Platform E-IDE driver atiixp 0000:00:14.1: IDE controller (0x1002:0x4376 rev 0x80) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 pci 0000:00:14.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 atiixp 0000:00:14.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x84b0-0x84b7 ide1: BM-DMA at 0x84b8-0x84bf Probing IDE interface ide0... hda: ST9808210A, ATA DISK drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected Probing IDE interface ide1... hdc: HL-DT-ST DVD-RW GWA-4082N, ATAPI CD/DVD-ROM drive hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide_generic: I/O resource 0x1F0-0x1F7 not free. ide_generic: I/O resource 0x170-0x177 not free. hda: max request size: 512KiB hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 hda8 > hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 aoe: AoE v47 initialised. ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 ehci_hcd 0000:00:13.2: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.2: irq 10, io mem 0xc0007000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usbcore: registered new interface driver libusual PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.17. ALSA device list: No soundcards found. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 Bridge firewalling registered ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' ieee80211_crypt: registered algorithm 'CCMP' ieee80211_crypt: registered algorithm 'TKIP' powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MT-37 processors (1 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xa powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0xe powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x16 Using IPI Shortcut mode BIOS EDD facility v0.16 2004-Jun-25, 1 devices found kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 220k freed b43-phy0: Broadcom 4318 WLAN found phy0: Selected rate control algorithm 'pid' Broadcom 43xx driver loaded [ Features: PR, Firmware-ID: FW13 ] EXT3 FS on hda7, internal journal Adding 1502036k swap on /dev/hda6. Priority:-1 extents:1 across:1502036k input: b43-phy0 as /class/input/input3 firmware: requesting b43/ucode5.fw firmware: requesting b43/pcm5.fw firmware: requesting b43/b0g0initvals5.fw firmware: requesting b43/b0g0bsinitvals5.fw b43-phy0: Loading firmware version 351.126 (2006-07-29 05:54:02) b43-phy0 warning: You are using an old firmware image. Support for old firmware will be removed in July 2008. b43-phy0 warning: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4). b43-phy0: Radio hardware status changed to DISABLED irq 10: nobody cared (try booting with the "irqpoll" option) Pid: 0, comm: swapper Not tainted 2.6.27-gentoo-r8 #2 [] __report_bad_irq+0x24/0x69 [] __report_bad_irq+0x2b/0x69 [] note_interrupt+0x1ac/0x1e0 [] handle_IRQ_event+0x1a/0x3f [] handle_level_irq+0x63/0x85 [] do_IRQ+0x48/0x5d [] common_interrupt+0x23/0x30 [] acpi_idle_enter_c1+0xa5/0xdd [] cpuidle_idle_call+0x49/0x77 [] cpu_idle+0x41/0x5a ======================= handlers: [] (usb_hcd_irq+0x0/0x52) Disabling IRQ #10 b43-phy0: Radio turned off by software eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1