[gentoo-user] nic problem

[gentoo-user] nic problem

[Johannes Skov Frandsen]

I can't seem to get my system to detect my nic.

When I run lspci I get the following info:

Intel Corporation 82801DB PRO/100 VE (LOM) Ethernet Controller (rev 81)

what modules do I need to enable when I configure my kernel?

I have already enabled:

Device Drivers  --->
    Network Device Support  --->
        Ethernet (10 or 100 Mbit)  --->
            [*] EISA, VLB, PCI and on board controllers
                <*> EtherExporessPro/100 support
                <*> Intel(R) PRO/100+ support
                <*> Realtek RTL-8139 C+ PCI Fast Ethernet Adapter Support

But that doesn't seem to do the trick.

Any help appreciated


-- 

Regards / Venlig hilsen

Johannes Skov Frandsen

*Address:* Egelundsvej 18, DK-5260 Odense S
*Web:* www.omesc.com | *Email:* joe@omesc.com

-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] nic problem

[rebus_rdk]

[-- Attachment #1: Type: text/plain, Size: 1127 bytes --]

If lspci returns your NIC it should be fine, what does ifconfig -a says?

I'm sorry, but i dont quite understand what part of your system doesn't
detect your network interface...

On 6/11/07, Johannes Skov Frandsen <joe@omesc.com> wrote:
>
> I can't seem to get my system to detect my nic.
>
> When I run lspci I get the following info:
>
> Intel Corporation 82801DB PRO/100 VE (LOM) Ethernet Controller (rev 81)
>
> what modules do I need to enable when I configure my kernel?
>
> I have already enabled:
>
> Device Drivers  --->
>     Network Device Support  --->
>         Ethernet (10 or 100 Mbit)  --->
>             [*] EISA, VLB, PCI and on board controllers
>                 <*> EtherExporessPro/100 support
>                 <*> Intel(R) PRO/100+ support
>                 <*> Realtek RTL-8139 C+ PCI Fast Ethernet Adapter Support
>
> But that doesn't seem to do the trick.
>
> Any help appreciated
>
>
> --
>
> Regards / Venlig hilsen
>
> Johannes Skov Frandsen
>
> *Address:* Egelundsvej 18, DK-5260 Odense S
> *Web:* www.omesc.com | *Email:* joe@omesc.com
>
> --
> gentoo-user@gentoo.org mailing list
>
>


-- 
r.

[-- Attachment #2: Type: text/html, Size: 2020 bytes --]

Re: [gentoo-user] nic problem

[Johannes Skov Frandsen]

rebus_rdk wrote:
> If lspci returns your NIC it should be fine, what does ifconfig -a says?
>
> I'm sorry, but i dont quite understand what part of your system doesn't
> detect your network interface...
>
> On 6/11/07, Johannes Skov Frandsen <joe@omesc.com> wrote:
>>
>> I can't seem to get my system to detect my nic.
>>
>> When I run lspci I get the following info:
>>
>> Intel Corporation 82801DB PRO/100 VE (LOM) Ethernet Controller (rev 81)
>>
>> what modules do I need to enable when I configure my kernel?
>>
>> I have already enabled:
>>
>> Device Drivers  --->
>>     Network Device Support  --->
>>         Ethernet (10 or 100 Mbit)  --->
>>             [*] EISA, VLB, PCI and on board controllers
>>                 <*> EtherExporessPro/100 support
>>                 <*> Intel(R) PRO/100+ support
>>                 <*> Realtek RTL-8139 C+ PCI Fast Ethernet Adapter
>> Support
>>
>> But that doesn't seem to do the trick.
>>
>> Any help appreciated
>>
>>
>> -- 
>>
>> Regards / Venlig hilsen
>>
>> Johannes Skov Frandsen
>>
>> *Address:* Egelundsvej 18, DK-5260 Odense S
>> *Web:* www.omesc.com | *Email:* joe@omesc.com
>>
>> -- 
>> gentoo-user@gentoo.org mailing list
>>
>>
>
>
turns out I tried to access it on eth0, but it was in fact located on
eth1... solved my problem...

-- 

Regards / Venlig hilsen

Johannes Skov Frandsen

*Address:* Egelundsvej 18, DK-5260 Odense S
*Web:* www.omesc.com | *Email:* joe@omesc.com

-- 
gentoo-user@gentoo.org mailing list