[gentoo-user] Mplayer2, where is it?

[gentoo-user] Mplayer2, where is it?

[Dale]

Hi,

I went to a link a bit ago in Seamonkey and a box came up that it needed
mplayer2 plugin.  I don't see it in portage so can someone tell me where
I can find it? 

I looked on the forums but the posts I saw were really old.  Google
finds it but still no clue on where it is in portage.

Thanks in advance for the info.

Dale

:-)  :-)  :-) :-)

-- 
www.myspace.com/-remove-me-dalek1967

-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Mplayer2, where is it?

[Masood Ahmed]

Dale <dalek@exceedtech.net> writes:

> Hi,
>
> I went to a link a bit ago in Seamonkey and a box came up that it needed
> mplayer2 plugin.  I don't see it in portage so can someone tell me where
> I can find it? 
>
> I looked on the forums but the posts I saw were really old.  Google
> finds it but still no clue on where it is in portage.
>
> Thanks in advance for the info.

Is it mplayerplug-in ?
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Mplayer2, where is it?

[Dan Farrell]

On Sat, 10 Mar 2007 00:22:42 +0530
Masood Ahmed <masood08@gmail.com> wrote:

> Dale <dalek@exceedtech.net> writes:
> 
> > Hi,
> >
> > I went to a link a bit ago in Seamonkey and a box came up that it
> > needed mplayer2 plugin.  I don't see it in portage so can someone
> > tell me where I can find it? 
> >
> > I looked on the forums but the posts I saw were really old.  Google
> > finds it but still no clue on where it is in portage.
> >
> > Thanks in advance for the info.
> 
> Is it mplayerplug-in ?

*  net-www/mplayerplug-in
      Latest version available: 3.31-r1
      Latest version installed: 3.31-r1
      Size of files: 206 kB
      Homepage:      http://mplayerplug-in.sourceforge.net/
      Description:   mplayer plug-in for Gecko based browsers
      License:       GPL-2
i have it installed, so tell me the site that doesn't work and i'll
tell you if it does for me ... unless you don't use a gecko based
browser like firefox.
-- 
gentoo-user@gentoo.org mailing list

[gentoo-user] Re: Mplayer2, where is it?

[James]

Dan Farrell <dan <at> spore.ath.cx> writes:


> > > needed mplayer2 plugin.  I don't see it in portage so can someone
> > > tell me where I can find it? 

> *  net-www/mplayerplug-in

> i have it installed, so tell me the site that doesn't work and i'll
> tell you if it does for me ... unless you don't use a gecko based
> browser like firefox.

Hello,

I have seamonkey installed and tried to install mplayerplug-in
on an AMD 64 bit system:

<snip>
checking for X11/xpm.h... yes
checking for DPMSQueryExtension in -lXdpms... no
checking for X11/extensions/dpms.h... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating po/Makefile
config.status: creating install.sh
config.status: creating uninstall.sh
config.status: creating config.h
<snip>

x86_64-pc-linux-gnu-g++ -c -o plugin-support.o -Wall  -march=k8 -O2 -pipe 
-DXP_UNIX -DMOZ_X11 -I/usr/lib64/seamonkey/include/java
-I/usr/lib64/seamonkey/include/plugin -I/usr/include/nspr  
-I/usr/lib64/seamonkey/include -Iinclude -fPIC  -I/usr/include/gtk-2.0
-I/usr/lib64/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo
-I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include 
 -I/usr/include/gtk-2.0 -I/usr/lib64/gtk-2.0/include -I/usr/include/atk-1.0
-I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0
-I/usr/lib64/glib-2.0/include   -pthread -I/usr/include/glib-2.0
-I/usr/lib64/glib-2.0/include   -DGTK_ENABLED   Source/plugin-support.cpp
In file included from Source/nsScriptablePeer.h:48,
                 from Source/plugin.h:54,
                 from Source/plugin.cpp:37:
Source/nsIScriptableMplayerPlugin.h:10:25: error: nsISupports.h: No such file or
directory
In file included from Source/plugin.h:54,
                 from Source/plugin.cpp:37:
Source/nsScriptablePeer.h:49:26: error: nsIClassInfo.h: No such file or directory
In file included from Source/nsScriptablePeer.h:48,
                 from Source/plugin.h:54,
                 from Source/nsScriptablePeer.cpp:48:
Source/nsIScriptableMplayerPlugin.h:10:25: error: nsISupports.h: No such file or
directory
In file included from Source/plugin.h:54,
                 from Source/nsScriptablePeer.cpp:48:
Source/nsScriptablePeer.h:49:26: error: nsIClassInfo.h: No such file or directory
Source/plugin.cpp:38:31: error: nsIServiceManager.h: No such file or directory
Source/plugin.cpp:39:23: error: nsIMemory.h: No such file or directory


Ideas on what I missed?


James

-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Mplayer2, where is it?

[Dale]

[-- Attachment #1: Type: text/plain, Size: 2846 bytes --]

Masood Ahmed wrote:
> Dale <dalek@exceedtech.net> writes:
>
>   
>> Hi,
>>
>> I went to a link a bit ago in Seamonkey and a box came up that it needed
>> mplayer2 plugin.  I don't see it in portage so can someone tell me where
>> I can find it? 
>>
>> I looked on the forums but the posts I saw were really old.  Google
>> finds it but still no clue on where it is in portage.
>>
>> Thanks in advance for the info.
>>     
>
> Is it mplayerplug-in ?
>   

Thanks for the info. New problem now:

> i686-pc-linux-gnu-g++ -c -o plugin-support.o -Wall -march=athlon-xp
> -O2 -momit-leaf-frame-pointer -DXP_UNIX -DMOZ_X11
> -I/usr/lib/seamonkey/include/java -I/usr/lib/seamonkey/include/plugin
> -I/usr/include/nspr -I/usr/lib/seamonkey/include -Iinclude -fPIC
> -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include
> -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0
> -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
> -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include
> -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0
> -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -pthread
> -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -DGTK_ENABLED
> Source/plugin-support.cpp
> In file included from Source/nsScriptablePeer.h:48,
> from Source/plugin.h:54,
> from Source/plugin.cpp:37:
> Source/nsIScriptableMplayerPlugin.h:10:25: error: nsISupports.h: No
> such file or directory
> In file included from Source/plugin.h:54,
> from Source/plugin.cpp:37:
> Source/nsScriptablePeer.h:49:26: error: nsIClassInfo.h: No such file
> or directory
> In file included from Source/nsScriptablePeer.h:48,
> from Source/plugin.h:54,
> from Source/nsScriptablePeer.cpp:48:
> Source/nsIScriptableMplayerPlugin.h:10:25: error: nsISupports.h: No
> such file or directory
> In file included from Source/plugin.h:54,
> from Source/nsScriptablePeer.cpp:48:
> Source/nsScriptablePeer.h:49:26: error: nsIClassInfo.h: No such file
> or directory
> In file included from Source/nsScriptablePeer.h:48,
> from Source/plugin.h:54,
> from Source/plugin-support.cpp:1:
> Source/nsIScriptableMplayerPlugin.h:10:25: error: nsISupports.h: No
> such file or directory
> In file included from Source/plugin.h:54,
> from Source/plugin-support.cpp:1:
> Source/nsScriptablePeer.h:49:26: error: nsIClassInfo.h: No such file
> or directory
> Source/plugin.cpp:38:31: error: nsIServiceManager.h: No such file or
> directory
> Source/plugin.cpp:39:23: error: nsIMemory.h: No such file or directory
> Source/plugin.cpp:40:74: error: nsISupportsUtils.h: No such file or
> directory
> include/pluginbase.h:55: warning: 'class nsPluginInstanceBase' has
> virtual functions but non-virtual destructor

I did post all of it, just the first part. It is really long.

Any ideas on this?

Dale

:-) :-) :-) :-)



-- 
www.myspace.com/-remove-me-dalek1967


[-- Attachment #2: Type: text/html, Size: 4529 bytes --]

Re: [gentoo-user] Mplayer2, where is it?

[Renat Golubchyk]

[-- Attachment #1: Type: text/plain, Size: 810 bytes --]

Hi!

On Fri, 09 Mar 2007 12:06:52 -0600 Dale <dalek@exceedtech.net> wrote:
> I went to a link a bit ago in Seamonkey and a box came up that it
> needed mplayer2 plugin.  I don't see it in portage so can someone
> tell me where I can find it? 

mplayer2 is the name of the main executable of the old Windows Media
Player 6.4 (mplayer2.exe). So you just have to check that your
mplayerplug-in handles the application/x-mplayer2 mimetype. Write
about:plugins in the address bar of your Seamonkey and check if it is
the case. If it's not maybe you haven't compiled in Windows Media Plugin
support (wmp USE-flag must be set).


Cheers,
Renat

-- 
Probleme kann man niemals mit derselben Denkweise loesen,
durch die sie entstanden sind.
                                              (Einstein)

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-user] Mplayer2, where is it?

[Dale]

[-- Attachment #1: Type: text/plain, Size: 1879 bytes --]

Renat Golubchyk wrote:
> Hi!
>
> On Fri, 09 Mar 2007 12:06:52 -0600 Dale <dalek@exceedtech.net> wrote:
>   
>> I went to a link a bit ago in Seamonkey and a box came up that it
>> needed mplayer2 plugin.  I don't see it in portage so can someone
>> tell me where I can find it? 
>>     
>
> mplayer2 is the name of the main executable of the old Windows Media
> Player 6.4 (mplayer2.exe). So you just have to check that your
> mplayerplug-in handles the application/x-mplayer2 mimetype. Write
> about:plugins in the address bar of your Seamonkey and check if it is
> the case. If it's not maybe you haven't compiled in Windows Media Plugin
> support (wmp USE-flag must be set).
>
>
> Cheers,
> Renat
>
>   

Then we have other problems then:

> [ebuild   R   ] www-client/seamonkey-1.1.1  USE="crypt ipv6 java ldap
> xprint -debug -gnome -mozdevelop -moznocompose -moznoirc -moznomail
> -moznopango -moznoroaming -postgres -xforms -xinerama"

I don't even see the option of wmp.  I do have it enabled though.

> USE="3dnow X acl acpi alsa amd arts artswrappersuid automount berkdb
> bitmap-fonts browserplugin bzip2 cairo cddb cdr chroot cli cracklib
> crypt cups dbus doc dri dvd dvdr eds emboss encode esd exif fam fdftk
> fortran gaim gcj gdbm gif gimp gimpprint gkrellm gphoto2 gpm gstreamer
> gtk hal hbci iconv ipv6 isdnlog java javascript jbig jpeg jpeg2k
> justify kde ldap libg++ logrotate mad midi mikmod mmx mp3 mpeg ncurses
> nptl nptlonly nsplugin offensive ofx ogg opengl pam pcre pdf perl png
> ppds pppd python qt3 qt4 quicktime readline realmedia reflection
> scanner sdl seamonkey session spell spl sqlite sse ssl syslog tcl tcpd
> tiff tk truetype truetype-fonts type1-fonts udev unicode usb vorbis
> win32codecs wma wmf wmp x86 xml xorg xprint xv yahoo zlib"

Any ideas?  This is strange.

Dale

:-)  :-)  :-)  :-)


-- 
www.myspace.com/-remove-me-dalek1967


[-- Attachment #2: Type: text/html, Size: 2694 bytes --]

Re: [gentoo-user] Mplayer2, where is it?

[Renat Golubchyk]

[-- Attachment #1: Type: text/plain, Size: 2521 bytes --]

On Fri, 09 Mar 2007 17:18:38 -0600 Dale <dalek@exceedtech.net> wrote:
> Renat Golubchyk wrote:
> > On Fri, 09 Mar 2007 12:06:52 -0600 Dale <dalek@exceedtech.net>
> > wrote: 
> >> I went to a link a bit ago in Seamonkey and a box came up that it
> >> needed mplayer2 plugin.  I don't see it in portage so can someone
> >> tell me where I can find it? 
> >>     
> >
> > mplayer2 is the name of the main executable of the old Windows Media
> > Player 6.4 (mplayer2.exe). So you just have to check that your
> > mplayerplug-in handles the application/x-mplayer2 mimetype. Write
> > about:plugins in the address bar of your Seamonkey and check if it
> > is the case. If it's not maybe you haven't compiled in Windows
> > Media Plugin support (wmp USE-flag must be set).
> 
> Then we have other problems then:
> 
> > [ebuild   R   ] www-client/seamonkey-1.1.1  USE="crypt ipv6 java
> > ldap xprint -debug -gnome -mozdevelop -moznocompose -moznoirc
> > -moznomail -moznopango -moznoroaming -postgres -xforms -xinerama"
> 
> I don't even see the option of wmp.  I do have it enabled though.


ren@tux ~ $ equery uses -a mplayerplug-in
[ Searching for packages matching mplayerplug-in... ]
[ Colour Code : set unset ]
[ Legend : Left column  (U) - USE flags from make.conf              ]
[        : Right column (I) - USE flags packages was installed with ]
[ Found these USE variables for net-www/mplayerplug-in-3.21 ]
 U I
 + + gtk : Adds support for x11-libs/gtk+ (The GIMP Toolkit)
[ Found these USE variables for net-www/mplayerplug-in-3.31-r1 ]
 U I
 + - divx      : Divx Playback Support
 + - gmedia    : Google Media Playback Support
 + + gtk       : Adds support for x11-libs/gtk+ (The GIMP Toolkit)
 + + quicktime : Adds support for OpenQuickTime
 - - realmedia : Real Media Playback Support
 + - wmp       : Windows Media Playback Support
[ Found these USE variables for net-www/mplayerplug-in-3.35 ]
 U I
 + + divx      : Divx Playback Support
 + + gmedia    : Google Media Playback Support
 + + gtk       : Adds support for x11-libs/gtk+ (The GIMP Toolkit)
 + + quicktime : Adds support for OpenQuickTime
 - - realmedia : Real Media Playback Support
 + + wmp       : Windows Media Playback Support
ren@tux ~  $ quse -D wmp
 local:wmp:net-www/mplayerplug-in: Windows Media Playback Support


Cheers,
Renat

-- 
Probleme kann man niemals mit derselben Denkweise loesen,
durch die sie entstanden sind.
                                              (Einstein)

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-user] Mplayer2, where is it?

[Dale]

[-- Attachment #1: Type: text/plain, Size: 2906 bytes --]

Renat Golubchyk wrote:
> On Fri, 09 Mar 2007 17:18:38 -0600 Dale <dalek@exceedtech.net> wrote:
>   
>> Renat Golubchyk wrote:
>>     
>>> On Fri, 09 Mar 2007 12:06:52 -0600 Dale <dalek@exceedtech.net>
>>> wrote: 
>>>       
>>>> I went to a link a bit ago in Seamonkey and a box came up that it
>>>> needed mplayer2 plugin.  I don't see it in portage so can someone
>>>> tell me where I can find it? 
>>>>     
>>>>         
>>> mplayer2 is the name of the main executable of the old Windows Media
>>> Player 6.4 (mplayer2.exe). So you just have to check that your
>>> mplayerplug-in handles the application/x-mplayer2 mimetype. Write
>>> about:plugins in the address bar of your Seamonkey and check if it
>>> is the case. If it's not maybe you haven't compiled in Windows
>>> Media Plugin support (wmp USE-flag must be set).
>>>       
>> Then we have other problems then:
>>
>>     
>>> [ebuild   R   ] www-client/seamonkey-1.1.1  USE="crypt ipv6 java
>>> ldap xprint -debug -gnome -mozdevelop -moznocompose -moznoirc
>>> -moznomail -moznopango -moznoroaming -postgres -xforms -xinerama"
>>>       
>> I don't even see the option of wmp.  I do have it enabled though.
>>     
>
>
> ren@tux ~ $ equery uses -a mplayerplug-in
> [ Searching for packages matching mplayerplug-in... ]
> [ Colour Code : set unset ]
> [ Legend : Left column  (U) - USE flags from make.conf              ]
> [        : Right column (I) - USE flags packages was installed with ]
> [ Found these USE variables for net-www/mplayerplug-in-3.21 ]
>  U I
>  + + gtk : Adds support for x11-libs/gtk+ (The GIMP Toolkit)
> [ Found these USE variables for net-www/mplayerplug-in-3.31-r1 ]
>  U I
>  + - divx      : Divx Playback Support
>  + - gmedia    : Google Media Playback Support
>  + + gtk       : Adds support for x11-libs/gtk+ (The GIMP Toolkit)
>  + + quicktime : Adds support for OpenQuickTime
>  - - realmedia : Real Media Playback Support
>  + - wmp       : Windows Media Playback Support
> [ Found these USE variables for net-www/mplayerplug-in-3.35 ]
>  U I
>  + + divx      : Divx Playback Support
>  + + gmedia    : Google Media Playback Support
>  + + gtk       : Adds support for x11-libs/gtk+ (The GIMP Toolkit)
>  + + quicktime : Adds support for OpenQuickTime
>  - - realmedia : Real Media Playback Support
>  + + wmp       : Windows Media Playback Support
> ren@tux ~  $ quse -D wmp
>  local:wmp:net-www/mplayerplug-in: Windows Media Playback Support
>
>
> Cheers,
> Renat
>
>   

Ahhh, you meant wmp for the plug-in.  I thought you meant for Seamonkey.

OK.  I got that I think, since it is in the USE line in make.conf now. 
I also did a emerge -ND world to make sure it took all the way around. 
I still get the error in  my other reply though.  It fails to compile
and install.

You wouldn't happen to know about that would ya?  ;-)

Thanks

Dale

:-)  :-)  :-)  :-) 

-- 
www.myspace.com/-remove-me-dalek1967


[-- Attachment #2: Type: text/html, Size: 3903 bytes --]

Re: [gentoo-user] Mplayer2, where is it?

[Abhay Kedia]

[-- Attachment #1: Type: text/plain, Size: 630 bytes --]

On Saturday 10 Mar 2007 2:44:40 am Dale wrote:
>
> > Source/nsIScriptableMplayerPlugin.h:10:25: error: nsISupports.h: No
> > such file or directory
> > In file included from Source/plugin.h:54,
> > from Source/plugin-support.cpp:1:
> > Source/nsScriptablePeer.h:49:26: error: nsIClassInfo.h: No such file
> > or directory
>
> I did post all of it, just the first part. It is really long.
>
> Any ideas on this?
>
A similar problem was also discussed on forums some time back
http://forums.gentoo.org/viewtopic-t-542909.html

See if the work around mentioned in there works for you or not.

-- 
Regards,
Abhay

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-user] Mplayer2, where is it?

[Masood Ahmed]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Dale <dalek@exceedtech.net> writes:
> Thanks for the info.  New problem now:
>
>   i686-pc-linux-gnu-g++ -c -o plugin-support.o -Wall  -march=athlon-xp -O2
>   -momit-leaf-frame-pointer  -DXP_UNIX -DMOZ_X11
>   -I/usr/lib/seamonkey/include/java -I/usr/lib/seamonkey/include/plugin
>   -I/usr/include/nspr   -I/usr/lib/seamonkey/include -Iinclude -fPIC 
>   -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0
>   -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0
>   -I/usr/lib/glib-2.0/include   -I/usr/include/gtk-2.0
>   -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo
>   -I/usr/include/pango-1.0 -I/usr/include/glib-2.0
>   -I/usr/lib/glib-2.0/include   -pthread -I/usr/include/glib-2.0
>   -I/usr/lib/glib-2.0/include   -DGTK_ENABLED   Source/plugin-support.cpp
>   In file included from Source/nsScriptablePeer.h:48,
>  from Source/plugin.h:54,
>  from Source/plugin.cpp:37:
>   Source/nsIScriptableMplayerPlugin.h:10:25: error: nsISupports.h: No such
>   file or directory
>   In file included from Source/plugin.h:54,
>  from Source/plugin.cpp:37:
>   Source/nsScriptablePeer.h:49:26: error: nsIClassInfo.h: No such file or
>   directory
>   In file included from Source/nsScriptablePeer.h:48,
>  from Source/plugin.h:54,
>  from Source/nsScriptablePeer.cpp:48:
>   Source/nsIScriptableMplayerPlugin.h:10:25: error: nsISupports.h: No such
>   file or directory
>   In file included from Source/plugin.h:54,
>  from Source/nsScriptablePeer.cpp:48:
>   Source/nsScriptablePeer.h:49:26: error: nsIClassInfo.h: No such file or
>   directory
>   In file included from Source/nsScriptablePeer.h:48,
>  from Source/plugin.h:54,
>  from Source/plugin-support.cpp:1:
>   Source/nsIScriptableMplayerPlugin.h:10:25: error: nsISupports.h: No such
>   file or directory
>   In file included from Source/plugin.h:54,
>  from Source/plugin-support.cpp:1:
>   Source/nsScriptablePeer.h:49:26: error: nsIClassInfo.h: No such file or
>   directory
>   Source/plugin.cpp:38:31: error: nsIServiceManager.h: No such file or
>   directory
>   Source/plugin.cpp:39:23: error: nsIMemory.h: No such file or directory
>   Source/plugin.cpp:40:74: error: nsISupportsUtils.h: No such file or
>   directory
>   include/pluginbase.h:55: warning: 'class nsPluginInstanceBase' has
>   virtual functions but non-virtual destructor
>
> I did post all of it, just the first part.  It is really long. 
>
> Any ideas on this?

On my system mplayerplug-in does not use seamonkey but uses mozilla-firefox.
Also note that I'm using ~x86 version of mplayerplug-in. But if you dont have
a working plugin yet, I suggest you take a look at this addon for firefox,
seamonkey and mozilla:
          https://addons.mozilla.org/firefox/446/

Quoted from the site:
Allow you to launch embed video of website in an external application with a 
simple click

* Replace the stream by a simple button
* Add a download icon in the status bar
* And/Or add links to right click
* Works with RealMedia, QuickTime, WindowsMedia, Playlists, Flash, background 
sounds, Nullsoft video, Shockwave
* Allow the use of any capable media player (with command line support)
* Support Media Metafiles (ram, rpm, wmv, wm, wma, asx, asf, ...)
* Activable per media format
* AutoPlay feature : automaticatlly start to play the first media
* Configuration wizard
* SmartPlay : automatically search and choose the best source using metafile 
('+' icon) if exist
* List all media links on the webpage
* Use a sidebar for lists
* Multilingual 

Hope this helps,
Masood Ahmed.

P.S: The gentoo-wiki says there is a mplayerplug-in-bin ebuild. But the link
for the ebuild is broken. If anyone finds that ebuild please update the wiki
and let us all know about it. I'm unable to find it yet. The gentoo-wiki page:
    http://gentoo-wiki.com/HOWTO_mplayerplug-in#x86_64s
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.2 (GNU/Linux)
Comment: Processed by Mailcrypt 3.5.8 <http://mailcrypt.sourceforge.net/>

iD8DBQFF8vKS1sVfs9hAkb8RAqZKAJ4mlpXKVAhC6U4cADRjoVGd+h0pTQCeK4Lz
oK3SyrcLGIlD7lbDz/5VXew=
=T2D8
-----END PGP SIGNATURE-----
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Mplayer2, where is it?

[Dale]

[-- Attachment #1: Type: text/plain, Size: 1066 bytes --]

Abhay Kedia wrote:
> On Saturday 10 Mar 2007 2:44:40 am Dale wrote:
>   
>>> Source/nsIScriptableMplayerPlugin.h:10:25: error: nsISupports.h: No
>>> such file or directory
>>> In file included from Source/plugin.h:54,
>>> from Source/plugin-support.cpp:1:
>>> Source/nsScriptablePeer.h:49:26: error: nsIClassInfo.h: No such file
>>> or directory
>>>       
>> I did post all of it, just the first part. It is really long.
>>
>> Any ideas on this?
>>
>>     
> A similar problem was also discussed on forums some time back
> http://forums.gentoo.org/viewtopic-t-542909.html
>
> See if the work around mentioned in there works for you or not.
>
>   

Since I don't have a /usr/lib/mozilla-firefox directory then that won't
work.  I may can replace the mozilla part with Seamonkey and try it but
I hate to add all that since it will create links that portage will
never be able to delete and they will be left hanging at some point in
the future.

I wonder if this should be filed as a bug?

Thanks

Dale 

:-)  :-)  :-)  :-)

-- 
www.myspace.com/-remove-me-dalek1967


[-- Attachment #2: Type: text/html, Size: 1803 bytes --]