[gentoo-user] emerge openssl starts a bash debug session.

[gentoo-user] emerge openssl starts a bash debug session.

[David Harel]

Hi there,


When openssl emerges it goes into bash debug. anyway to aviod that?

-- 
Regards.

David Harel,

==================================

Home office +972 77 4422234
Fax:        +972 77 4422234
Cellular:   +972 54 4534502
Snail Mail: Amuka
            D.N Merom Hagalil
            13802
            Israel
Email:      hareldvd@ergolight-sw.com


-- 
gentoo-user@gentoo.org mailing list

RE: [gentoo-user] emerge openssl starts a bash debug session.

[Nelson, David (ED, PAR&D)]

> -----Original Message-----
> From: David Harel [mailto:hareldvd@ergolight-sw.com]
> Sent: 04 January 2007 08:32
> To: gentoo-user@lists.gentoo.org
> Subject: [gentoo-user] emerge openssl starts a bash debug session.
> 
> 
> Hi there,
> 
> 
> When openssl emerges it goes into bash debug. anyway to aviod that?
> 
> -- 
> Regards.
> 
> David Harel,

Any other messages or such when it happens? Could you perhaps paste in the console output as it appears?

(No ideas myself on this at this point, just trying to perhaps lay some groundwork for others who might notice the problem).

David
Note: These views are my own, advice is provided with no guarantee of success. I do not represent anyone else in any emails I send to this list.

-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] emerge openssl starts a bash debug session.

[David Harel]

[-- Attachment #1: Type: text/plain, Size: 4094 bytes --]

Here is what happnes:

harellaptop etc # emerge openssl
Calculating dependencies... done!

 >>> Emerging (1 of 1) dev-libs/openssl-0.9.8d to /
 * openssl-0.9.8d.tar.gz MD5 ;-) 
...                                      [ ok ]
 * openssl-0.9.8d.tar.gz RMD160 ;-) 
...                                   [ ok ]
 * openssl-0.9.8d.tar.gz SHA1 ;-) 
...                                     [ ok ]
 * openssl-0.9.8d.tar.gz SHA256 ;-) 
...                                   [ ok ]
 * openssl-0.9.8d.tar.gz size ;-) 
...                                     [ ok ]
 * checking ebuild checksums ;-) 
...                                      [ ok ]
 * checking auxfile checksums ;-) 
...                                     [ ok ]
 * checking miscfile checksums ;-) 
...                                    [ ok ]
 * checking openssl-0.9.8d.tar.gz ;-) 
...                                 [ ok ]
 >>> Unpacking source...
 >>> Unpacking openssl-0.9.8d.tar.gz to /var/tmp/portage/openssl-0.9.8d/work
 * Applying openssl-0.9.8-ppc64.patch 
...                                 [ ok ]
 * Applying openssl-0.9.7e-gentoo.patch 
...                               [ ok ]
 * Applying openssl-0.9.8-hppa-fix-detection.patch 
...                    [ ok ]
 * Applying openssl-0.9.7-alpha-default-gcc.patch 
...                     [ ok ]
 * Applying openssl-0.9.8b-parallel-build.patch 
...                       [ ok ]
 * Applying openssl-0.9.8-make-engines-dir.patch 
...                      [ ok ]
 * Applying openssl-0.9.8-toolchain.patch 
...                             [ ok ]
 * Applying openssl-0.9.8b-doc-updates.patch 
...                          [ ok ]
 * Applying openssl-0.9.8-makedepend.patch 
...                            [ ok ]
Operating system: i686-whatever-linux2
Configuring for linux-elf
======================================================================
=== SANITY TESTING!
=== No configuration will be done, all other arguments will be ignored!
======================================================================
No sanity errors detected!
 >>> Source unpacked.
 >>> Compiling source in 
/var/tmp/portage/openssl-0.9.8d/work/openssl-0.9.8d ...
 * Use configuration linux-elf
Reading /var/tmp/portage/openssl-0.9.8d/work/openssl-0.9.8d/Configure: 
[=====================>                   ]  54%
done.
(/var/tmp/portage/openssl-0.9.8d/work/openssl-0.9.8d/Configure:1):
1:      :
bashdb<0>   ^D


making depend in crypto...
make[1]: Entering directory 
`/var/tmp/portage/openssl-0.9.8d/work/openssl-0.9.8d/crypto'
makedepend: warning:  cryptlib.c (reading /usr/include/stdlib.h, line 
33): cannot find include file "stddef.h"
        not in ./stddef.h
        not in ../stddef.h
        not in ../include/stddef.h
        not in /usr/include/stddef.h
makedepend: warning:  cryptlib.c (reading /usr/include/bits/types.h, 
line 31): cannot find include file "stddef.h"
        not in ./stddef.h


.

.

.


And then hell goes loose (well not really that bad but bad enough - 
unresolved references and so on).


Nelson, David (ED, PAR&D) wrote:

>> -----Original Message-----
>> From: David Harel [mailto:hareldvd@ergolight-sw.com]
>> Sent: 04 January 2007 08:32
>> To: gentoo-user@lists.gentoo.org
>> Subject: [gentoo-user] emerge openssl starts a bash debug session.
>>
>>
>> Hi there,
>>
>>
>> When openssl emerges it goes into bash debug. anyway to aviod that?
>>
>> -- 
>> Regards.
>>
>> David Harel,
>>     
>
> Any other messages or such when it happens? Could you perhaps paste in the console output as it appears?
>
> (No ideas myself on this at this point, just trying to perhaps lay some groundwork for others who might notice the problem).
>
> David
> Note: These views are my own, advice is provided with no guarantee of success. I do not represent anyone else in any emails I send to this list.
>
>   

-- 
Regards.

David Harel,

==================================

Home office +972 77 4422234
Fax:        +972 77 4422234
Cellular:   +972 54 4534502
Snail Mail: Amuka
            D.N Merom Hagalil
            13802
            Israel
Email:      hareldvd@ergolight-sw.com



[-- Attachment #2: Type: text/html, Size: 8829 bytes --]

RE: [gentoo-user] emerge openssl starts a bash debug session.

[Nelson, David (ED, PAR&D)]

[-- Attachment #1: Type: text/plain, Size: 1214 bytes --]

-----Original Message-----
From: David Harel [mailto:hareldvd@ergolight-sw.com]
Sent: 05 January 2007 22:27
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] emerge openssl starts a bash debug session.
> 
> make[1]: Entering directory `/var/tmp/portage/openssl-0.9.8d/work/openssl-0.9.8d/crypto'
> makedepend: warning:  cryptlib.c (reading /usr/include/stdlib.h, line 33): cannot find include file "stddef.h"
>        not in ./stddef.h
>        not in ../stddef.h
>      not in ../include/stddef.h
>     not in /usr/include/stddef.h
>makedepend: warning:  cryptlib.c (reading /usr/include/bits/types.h, line 31): cannot find include file "stddef.h"
 >         not in ./stddef.h 
 
 
Again, I'm not 100% sure of what the issue is - just trying to see if I can suggest anything useful - but can you do 'locate stddef.h' or something? It looks like it's missing a file. There is also a command - using equery I think - to find out what package a specific file belongs to, which would help you fix any missing dependencies or such.

David

Note: These views are my own, advice is provided with no guarantee of success. I do not represent anyone else in any emails I send to this list.


[-- Attachment #2: Type: text/html, Size: 2854 bytes --]

Re: [gentoo-user] emerge openssl starts a bash debug session.

[David Harel]

I am afraid the problem is not as simple as you try to describe it.

to begin with, here is the result of find on stddef.h


# find / -mount -name stddef.h
/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.6/include/stddef.h
/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.6/install-tools/include/stddef.h
/usr/lib/gcc/i686-pc-linux-gnu/3.4.5/include/stddef.h
/usr/lib/gcc/i686-pc-linux-gnu/3.4.5/install-tools/include/stddef.h
/usr/lib/gcc/i686-pc-linux-gnu/4.1.1/include/stddef.h
/usr/include/linux/stddef.h
/usr/include/wine/msvcrt/stddef.h
/usr/src/linux-2.6.15-gentoo-r1/include/linux/stddef.h
/usr/src/linux-2.6.17-gentoo-r8/include/linux/stddef.h



but also I must mention that I was successful in compiling openssl 
manually by

cd to /var/tmp/portage/openssl-0.9.8d/work/openssl-0.9.8d and then do 
./config and make it all came out just fine.



Nelson, David (ED, PAR&D) wrote:

> -----Original Message-----
> *From:* David Harel [mailto:hareldvd@ergolight-sw.com]
> *Sent:* 05 January 2007 22:27
> *To:* gentoo-user@lists.gentoo.org
> *Subject:* Re: [gentoo-user] emerge openssl starts a bash debug session.
> > 
> > make[1]: Entering directory 
> `/var/tmp/portage/openssl-0.9.8d/work/openssl-0.9.8d/crypto'
> > makedepend: warning:  cryptlib.c (reading /usr/include/stdlib.h, line 
> 33): cannot find include file "stddef.h"
> >        not in ./stddef.h
> >        not in ../stddef.h
> >      not in ../include/stddef.h
> >     not in /usr/include/stddef.h
> >makedepend: warning:  cryptlib.c (reading /usr/include/bits/types.h, 
> line 31): cannot find include file "stddef.h"
>  >         not in ./stddef.h 
>  
>  
> Again, I'm not 100% sure of what the issue is - just trying to see if 
> I can suggest anything useful - but can you do 'locate stddef.h' or 
> something? It looks like it's missing a file. There is also a command 
> - using equery I think - to find out what package a specific file 
> belongs to, which would help you fix any missing dependencies or such.
>
> David
>
> /Note: These views are my own, advice is provided with no guarantee of 
> success. I do not represent anyone else in any emails I send to this 
> list./
>

-- 
Regards.

David Harel,

==================================

Home office +972 77 4422234
Fax:        +972 77 4422234
Cellular:   +972 54 4534502
Snail Mail: Amuka
            D.N Merom Hagalil
            13802
            Israel
Email:      hareldvd@ergolight-sw.com


-- 
gentoo-user@gentoo.org mailing list