[gentoo-user] dma_intr: status=0x51

[Matthias Langer <mlangc@gmx.at>]

I just bought myself a new harddrive. While everything seems to work 
fine so far, I recognized these messages from dmesg:

hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }

I'm using vanilla-sources-2.6.12.5.

Here are some other parts from dmesg, which are included to describe the 
relevant hardware in detail:

SiI680: IDE controller at PCI slot 0000:00:09.0
....
SiI680: chipset revision 1
SiI680: BASE CLOCK == 133
SiI680: 100% native mode on irq 10
    ide0: MMIO-DMA , BIOS settings: hda:pio, hdb:pio
    ide1: MMIO-DMA , BIOS settings: hdc:pio, hdd:pio
...
Probing IDE interface ide1...
hdc: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive
hdd: Maxtor 6L250R0, ATA DISK drive
hdd: max request size: 64KiB
hdd: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63, 
UDMA(133)
hdd: cache flushes supported

Finally, this is what i get from hdparm -i /dev/hdd:
 
 Model=Maxtor 6L250R0, FwRev=BAH41G10, SerialNo=L59CY5SH
 Config={ Fixed }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
 BuffType=DualPortCache, BuffSize=16384kB, MaxMultSect=16, MultSect=16
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4
 DMA modes:  mdma0 mdma1 mdma2
 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma6
 AdvancedPM=yes: disabled (255) WriteCache=enabled
 Drive conforms to: (null):

Maybe someone can give me a hint what might be wrong with my configuration.

Thanks, Matthias





-- 
gentoo-user@gentoo.org mailing list