Re: [gentoo-user] dhcpcd 2.0.0 - Boot process hangs

[Christoph Daldrup <cd-news@gmx.net>]

Am 01.09.2005 14:36 schrieb Christoph Daldrup:

> Am 01.09.2005 09:41 schrieb Stefan Frank:
> 
>> I just did a emerge -u dhcp and I was able to do /etc/init.d/net.eth0 restart 
>> without problems. Try to clear the cache of dhcpcd under /var/lib/dhcpc (?) 
>> and to start it again. 
> 
> Thanks for that suggestion, I will try later.

OK, I tried again. I do get an IP, I can connect to the internet, but
the dhcpcd-process does not finish. In a working gentoo environment that
 is not a big problem, but while booting, this is bad.

This is the output I get:
>  *   Bringing up eth1
>  *     dhcp
>  *       Running dhcpcd ...
> ClassID  = "Linux 2.6.12-gentoo-r9 i686"
> ClientID = "61.7.1.00.0E.35.BC.F8.71"
> parseDhcpMsgRecv: 6 options received:
> i=1   len=4   option = 255.255.255.0
> i=3   len=4   option = 192.168.0.1
> i=6   len=4   option = 192.168.0.1
> i=51  len=4   option = 259200
> i=53  len=1   option = 2
> i=54  len=4   option = 192.168.0.1
> DhcpMsgRecv->yiaddr  = 192.168.0.2
> DhcpMsgRecv->siaddr  = 0.0.0.0
> DhcpMsgRecv->giaddr  = 0.0.0.0
> DhcpMsgRecv->sname   = ""
> ServerHardwareAddr   = 00.09.5B.D8.68.18
> parseDhcpMsgRecv: 9 options received:
> i=1   len=4   option = 255.255.255.0
> i=3   len=4   option = 192.168.0.1
> i=6   len=4   option = 192.168.0.1
> i=28  len=4   option = 192.168.0.255
> i=51  len=4   option = 259200
> i=53  len=1   option = 5
> i=54  len=4   option = 192.168.0.1
> i=58  len=4   option = 0
> i=59  len=4   option = 0
> DhcpMsgRecv->yiaddr  = 192.168.0.2
> DhcpMsgRecv->siaddr  = 0.0.0.0
> DhcpMsgRecv->giaddr  = 0.0.0.0
> DhcpMsgRecv->sname   = ""
> ServerHardwareAddr   = 00.09.5B.D8.68.18

Then the output stops, but I don't get a prompt. :(

What am I doing wrong?

Christoph
-- 
gentoo-user@gentoo.org mailing list