Okay!
If i do dmesg i get scsi0 : sata_sil ... shouldnt there be the SCSI Emultation....
scsi1 : sata_sil
Vendor: ATA ... thats my SATA HD
------------------------
if i do cat /proc/scsi/scsi i get:
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: HDS722580VLSA80 Rev: V32O
Type: Direct-Access ANSI SCSI revision: 05
-----------
# the dmesg scsi msg
sata_sil version 0.9
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11
ata1: SATA max UDMA/100 cmd 0xE08AE080 ctl 0xE08AE08A bmdma 0xE08AE000 irq 11
ata2: SATA max UDMA/100 cmd 0xE08AE0C0 ctl 0xE08AE0CA bmdma 0xE08AE008 irq 11
ata1: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3c02 87:4023 88:203f
ata1: dev 0 ATA, max UDMA/100, 160836480 sectors: lba48
ata1: dev 0 configured for UDMA/100
scsi0 : sata_sil
ata2: no device found (phy stat 00000000)
scsi1 : sata_sil
Vendor: ATA Model: HDS722580VLSA80 Rev: V32O
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
---------
Maybe a wrong interrupt is the problem!
CPU0
0: 4724423 XT-PIC timer
1: 7103 XT-PIC i8042
2: 0 XT-PIC cascade
5: 944743 XT-PIC ehci_hcd:usb1, NVidia nForce2, skge, ICE1712, eth0
7: 5803 XT-PIC parport0
8: 0 XT-PIC rtc
9: 3 XT-PIC acpi, ohci_hcd:usb3, ohci1394
10: 0 XT-PIC MPU401 UART
11: 360076 XT-PIC ohci_hcd:usb2, libata, nvidia
12: 223166 XT-PIC i8042
14: 1200 XT-PIC ide0
15: 1870 XT-PIC ide1
NMI: 0
LOC: 4724640
ERR: 53
MIS: 0
Please help!
Greetings,He4D