* Re: [gentoo-user] SCSI Emulation Problem for USB
2005-08-19 12:53 [gentoo-user] SCSI Emulation Problem for USB Tobias
@ 2005-08-19 11:17 ` Daniel Drake
2005-08-19 13:54 ` Tobias
1 sibling, 0 replies; 4+ messages in thread
From: Daniel Drake @ 2005-08-19 11:17 UTC (permalink / raw
To: gentoo-user
Tobias wrote:
> Please help!
It would help if you started by explaining what you are trying to do, what you
have tried, what problems you have faced, etc.
Daniel
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 4+ messages in thread
* [gentoo-user] SCSI Emulation Problem for USB
@ 2005-08-19 12:53 Tobias
2005-08-19 11:17 ` Daniel Drake
2005-08-19 13:54 ` Tobias
0 siblings, 2 replies; 4+ messages in thread
From: Tobias @ 2005-08-19 12:53 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 1815 bytes --]
Hi!!
If i do dmesg i get scsi0 : sata_sil ... shouldnt there be the SCSI
Emultation....
scsi1 : sata_sil
Vendor: ATA ... thats my SATA HD
------------------------
if i do cat /proc/scsi/scsi i get:
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: HDS722580VLSA80 Rev: V32O
Type: Direct-Access ANSI SCSI revision: 05
-----------
# the dmesg scsi msg
sata_sil version 0.9
ACPI: PCI *Interrupt* Link [LNK3] enabled at IRQ 11
ACPI: PCI *Interrupt* 0000:01:0b.0[A] -> Link [LNK3] -> GSI 11 (level,
low) -> IRQ 11
ata1: SATA max UDMA/100 cmd 0xE08AE080 ctl 0xE08AE08A bmdma 0xE08AE000
irq 11
ata2: SATA max UDMA/100 cmd 0xE08AE0C0 ctl 0xE08AE0CA bmdma 0xE08AE008
irq 11
ata1: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3c02 87:4023
88:203f
ata1: dev 0 ATA, max UDMA/100, 160836480 sectors: lba48
ata1: dev 0 configured for UDMA/100
scsi0 : sata_sil
ata2: no device found (phy stat 00000000)
scsi1 : sata_sil
Vendor: ATA Model: HDS722580VLSA80 Rev: V32O
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
---------
Maybe a wrong *interrupt* is the problem!
CPU0
0: 4724423 XT-PIC timer
1: 7103 XT-PIC i8042
2: 0 XT-PIC cascade
5: 944743 XT-PIC ehci_hcd:usb1, NVidia nForce2, skge, ICE1712, eth0
7: 5803 XT-PIC parport0
8: 0 XT-PIC rtc
9: 3 XT-PIC acpi, ohci_hcd:usb3, ohci1394
10: 0 XT-PIC MPU401 UART
11: 360076 XT-PIC ohci_hcd:usb2, libata, nvidia
12: 223166 XT-PIC i8042
14: 1200 XT-PIC ide0
15: 1870 XT-PIC ide1
NMI: 0
LOC: 4724640
ERR: 53
MIS: 0
Please help!
Greetings,He4D
[-- Attachment #2: Type: text/html, Size: 4398 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [gentoo-user] SCSI Emulation Problem for USB
2005-08-19 13:54 ` Tobias
@ 2005-08-19 13:50 ` Zac Medico
0 siblings, 0 replies; 4+ messages in thread
From: Zac Medico @ 2005-08-19 13:50 UTC (permalink / raw
To: gentoo-user
Tobias wrote:
> Tobias wrote:
>
>> Hi!!
>> If i do dmesg i get scsi0 : sata_sil ... shouldnt there be the SCSI
>> Emultation....
>> scsi1 : sata_sil
>> Vendor: ATA ... thats my SATA HD
>> ------------------------
>> if i do cat /proc/scsi/scsi i get:
>>
>> Attached devices:
>> Host: scsi0 Channel: 00 Id: 00 Lun: 00
>> Vendor: ATA Model: HDS722580VLSA80 Rev: V32O
>> Type: Direct-Access ANSI SCSI revision: 05
>> -----------
>> # the dmesg scsi msg
>>
>> sata_sil version 0.9
>> ACPI: PCI *Interrupt* Link [LNK3] enabled at IRQ 11
>> ACPI: PCI *Interrupt* 0000:01:0b.0[A] -> Link [LNK3] -> GSI 11 (level,
>> low) -> IRQ 11
>> ata1: SATA max UDMA/100 cmd 0xE08AE080 ctl 0xE08AE08A bmdma 0xE08AE000
>> irq 11
>> ata2: SATA max UDMA/100 cmd 0xE08AE0C0 ctl 0xE08AE0CA bmdma 0xE08AE008
>> irq 11
>> ata1: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3c02
>> 87:4023 88:203f
>> ata1: dev 0 ATA, max UDMA/100, 160836480 sectors: lba48
>> ata1: dev 0 configured for UDMA/100
>> scsi0 : sata_sil
>> ata2: no device found (phy stat 00000000)
>> scsi1 : sata_sil
>> Vendor: ATA Model: HDS722580VLSA80 Rev: V32O
>> Type: Direct-Access ANSI SCSI revision: 05
>> SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
>> SCSI device sda: drive cache: write back
>> SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
>> SCSI device sda: drive cache: write back
>> sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
>> Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>> ---------
>> Maybe a wrong *interrupt* is the problem!
>>
>> CPU0
>> 0: 4724423 XT-PIC timer
>> 1: 7103 XT-PIC i8042
>> 2: 0 XT-PIC cascade
>> 5: 944743 XT-PIC ehci_hcd:usb1, NVidia nForce2, skge, ICE1712, eth0
>> 7: 5803 XT-PIC parport0
>> 8: 0 XT-PIC rtc
>> 9: 3 XT-PIC acpi, ohci_hcd:usb3, ohci1394
>> 10: 0 XT-PIC MPU401 UART
>> 11: 360076 XT-PIC ohci_hcd:usb2, libata, nvidia
>> 12: 223166 XT-PIC i8042
>> 14: 1200 XT-PIC ide0
>> 15: 1870 XT-PIC ide1
>> NMI: 0
>> LOC: 4724640
>> ERR: 53
>> MIS: 0
>>
>> Please help!
>>
>> Greetings,He4D
>
> Okay!
> I want to mount my USB 2.0 Harddisk.
> But i cant mount it without the /dev/sd.... device
> Ive done everything that stands in the Gentoo USB Install Manual.
> Nothing worked! The Kernel is 100% right configured!!
>
> Greetings, He4D
Make sure you have CONFIG_USB_STORAGE and CONFIG_BLK_DEV_SD enabled in your kernel config. If the drivers are modular then you need usb_storage and sd_mod loaded (in addition to the usb drivers).
Zac
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [gentoo-user] SCSI Emulation Problem for USB
2005-08-19 12:53 [gentoo-user] SCSI Emulation Problem for USB Tobias
2005-08-19 11:17 ` Daniel Drake
@ 2005-08-19 13:54 ` Tobias
2005-08-19 13:50 ` Zac Medico
1 sibling, 1 reply; 4+ messages in thread
From: Tobias @ 2005-08-19 13:54 UTC (permalink / raw
To: gentoo-user
[-- Attachment #1: Type: text/plain, Size: 2179 bytes --]
Tobias wrote:
> Hi!!
> If i do dmesg i get scsi0 : sata_sil ... shouldnt there be the SCSI
> Emultation....
> scsi1 : sata_sil
> Vendor: ATA ... thats my SATA HD
> ------------------------
> if i do cat /proc/scsi/scsi i get:
>
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: HDS722580VLSA80 Rev: V32O
> Type: Direct-Access ANSI SCSI revision: 05
> -----------
> # the dmesg scsi msg
>
> sata_sil version 0.9
> ACPI: PCI *Interrupt* Link [LNK3] enabled at IRQ 11
> ACPI: PCI *Interrupt* 0000:01:0b.0[A] -> Link [LNK3] -> GSI 11 (level,
> low) -> IRQ 11
> ata1: SATA max UDMA/100 cmd 0xE08AE080 ctl 0xE08AE08A bmdma 0xE08AE000
> irq 11
> ata2: SATA max UDMA/100 cmd 0xE08AE0C0 ctl 0xE08AE0CA bmdma 0xE08AE008
> irq 11
> ata1: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3c02
> 87:4023 88:203f
> ata1: dev 0 ATA, max UDMA/100, 160836480 sectors: lba48
> ata1: dev 0 configured for UDMA/100
> scsi0 : sata_sil
> ata2: no device found (phy stat 00000000)
> scsi1 : sata_sil
> Vendor: ATA Model: HDS722580VLSA80 Rev: V32O
> Type: Direct-Access ANSI SCSI revision: 05
> SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
> SCSI device sda: drive cache: write back
> SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
> SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
> Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
> ---------
> Maybe a wrong *interrupt* is the problem!
>
> CPU0
> 0: 4724423 XT-PIC timer
> 1: 7103 XT-PIC i8042
> 2: 0 XT-PIC cascade
> 5: 944743 XT-PIC ehci_hcd:usb1, NVidia nForce2, skge, ICE1712, eth0
> 7: 5803 XT-PIC parport0
> 8: 0 XT-PIC rtc
> 9: 3 XT-PIC acpi, ohci_hcd:usb3, ohci1394
> 10: 0 XT-PIC MPU401 UART
> 11: 360076 XT-PIC ohci_hcd:usb2, libata, nvidia
> 12: 223166 XT-PIC i8042
> 14: 1200 XT-PIC ide0
> 15: 1870 XT-PIC ide1
> NMI: 0
> LOC: 4724640
> ERR: 53
> MIS: 0
>
> Please help!
>
> Greetings,He4D
Okay!
I want to mount my USB 2.0 Harddisk.
But i cant mount it without the /dev/sd.... device
Ive done everything that stands in the Gentoo USB Install Manual.
Nothing worked! The Kernel is 100% right configured!!
Greetings, He4D
[-- Attachment #2: Type: text/html, Size: 5041 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2005-08-19 13:54 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-08-19 12:53 [gentoo-user] SCSI Emulation Problem for USB Tobias
2005-08-19 11:17 ` Daniel Drake
2005-08-19 13:54 ` Tobias
2005-08-19 13:50 ` Zac Medico
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox