[gentoo-user] Acer TM2313 NIC problems

[gentoo-user] Acer TM2313 NIC problems

[Frank Schafer]

Hi,

I've bought a new Acer TravelMate 2313. I've tried to install this
weekend.
Everything seemed to go fine but I don't have a network connection.

The NIC is a SiS 900 PCI fast ethernet adapter. Looking at ``dmesg''
there everything looks O.K. I see the driver loading, finding the card
and bringing the link up.

The lights on the NIC are both (continous) lighting. If I do an
``ifconfig eth0 down'' followed by an ``ifconfig eth0 up`` the lights
turn both off for about one second and then both on again.

I see the link coming up in the log and in dmesg.

Trying to ping some address I get "network unreachable". The network
connection itself works. This is tested with another (Acer) notebook.

Due to the fact that there are a couple of messages about disconnecting
and connecting PCI devices in the log I'm wondering about a hardware
problem.

Well this all don't happen with Gentoo. Acer (fortunately) has a "Linpus
Linux" installed on delivery. So I have a means to do some recovery.

I've tried this of course with the Gentoo install CD too. Further on
I've tried Knoppix, Mandrake, SuSe, Ubuntu and Fedora.

I know I've seen some messages about Acer notebooks on this list.
Unfortunately I cannot search the archives without a network connection.
My chief tolerates if I'm writing a mail during working time. I'm afraid
he won't tolerate me spending hours searching something private on the
WEB.

If someone knows about issues with the sis900.c module please let me
know.

Thanks in advance
Frank

PS: ... and yes, I did RTFM ``menuconfig'' points to. ;)

-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Acer TM2313 NIC problems

[Richard Fish]

Frank Schafer wrote:

>Hi,
>
>I've bought a new Acer TravelMate 2313. I've tried to install this
>weekend.
>Everything seemed to go fine but I don't have a network connection.
>
>The NIC is a SiS 900 PCI fast ethernet adapter. Looking at ``dmesg''
>there everything looks O.K. I see the driver loading, finding the card
>and bringing the link up.
>
>The lights on the NIC are both (continous) lighting. If I do an
>``ifconfig eth0 down'' followed by an ``ifconfig eth0 up`` the lights
>turn both off for about one second and then both on again.
>  
>

Did you assign an address when you did "ifconfig eth0 up"?  Or does your 
network use DHCP, and if so, did you run dhcpcd/dhclient to get an address?

The output of "ifconfig -a", "route -n", and "cat /etc/conf.d/net" might 
give us some more clues.

-Richard

-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Acer TM2313 NIC problems

[Frank Schafer]

On Mon, 2005-08-08 at 06:20 -0700, Richard Fish wrote:
> Frank Schafer wrote:
> 
> >Hi,
> >
> >I've bought a new Acer TravelMate 2313. I've tried to install this
> >weekend.
> >Everything seemed to go fine but I don't have a network connection.
> >
> >The NIC is a SiS 900 PCI fast ethernet adapter. Looking at ``dmesg''
> >there everything looks O.K. I see the driver loading, finding the card
> >and bringing the link up.
> >
> >The lights on the NIC are both (continous) lighting. If I do an
> >``ifconfig eth0 down'' followed by an ``ifconfig eth0 up`` the lights
> >turn both off for about one second and then both on again.
> >  
> >
> 
> Did you assign an address when you did "ifconfig eth0 up"?  Or does your 
> network use DHCP, and if so, did you run dhcpcd/dhclient to get an address?
> 
> The output of "ifconfig -a", "route -n", and "cat /etc/conf.d/net" might 
> give us some more clues.
> 
> -Richard
> 

Thanks Richard,

I've configured eth0 using net-setup (wired network, fixed address).
At the moment I can't send any output of anything. The comp now for
about one week belongs to an authorized service partner of Acer.
There are messages apout resetting the PCI bus and about a failing and
resetting hda in the syslog.
These messages convinced me to give it away for a while.

Regards
Frank

-- 
gentoo-user@gentoo.org mailing list