Re: [gentoo-user] Re: DVD-cd usage

[Rumen Yotov <rumen_yotov@dir.bg>]

[-- Attachment #1: Type: text/plain, Size: 2438 bytes --]

James wrote:

>James Hiscock <boxroot <at> gmail.com> writes:
>
>
>  
>
>>>Warning: There is absolutely NO DMA, operations thus are slow.
>>>Using libscg version 'schily-0.8'.
>>>Device type    : Removable CD-ROM
>>>Version        : 0
>>>Response Format: 2
>>>Capabilities   :
>>>Vendor_info    : 'TOSHIBA '
>>>Identifikation : 'DVD-ROM SD-R2412'
>>>Revision       : '1015'
>>>Device seems to be: Generic mmc2 DVD-ROM.
>>>      
>>>
>
>  
>
>>This seems suspect to me... it looks like cdrecord is detecting your
>>burner as a CD/DVD-ROM, not a burner. I had a similar problem with an
>>external USB 2.0 DVD+-RW drive that would get misdetected. Took a
>>while to figure out what the heck was going on...
>>    
>>
>
>  
>
>>Is it possible that that's what you're running into?
>>    
>>
>
>Quite probable.
>It could even be something stupid I did in building the kernel....
>
>I can mount and copy files off the cd, only.
>
>I've never been able to get a cd burner working on linux....
>I have no idea what to try/do.....gui or command line....
>
>If you suggest something, tell me where a simple file is to use
>and suggest exact syntax....
>
>I'd just like to see a simple ascii text file burned to either
>the rw media or the oneshot cd media.....
>
>Ideas are most welcome.
>
>Jamess
>
>
>
>
>
>  
>
Hi James,
Googling for "DVD-ROM SD-R2412+linux" showed me that it's a combo - 
DVD-ROM&CD-RW.
Now looking at some page from Norway with some CLI scripts, can't get 
the language tough ;)
...BEGIN...
Når det er gjort kan du i mitt tilfelle kjøre følgende kommando for å 
brenne image’et over på CD:

cdrecord -v speed=24 dev=ATAPI:/dev/cdrom filnavn.iso
...SKIP...
Dermed har du en fil ved navn track1.wav som er klar for brenning. 
Sannsynligvis vil du ha mer enn et spor på audio-CD’en, så det er bare å 
gjenta prosessen med andre filnavn (f.eks. track2.wav, track3.wav, 
etc.), og f.eks. kopier dem til en mappe ved navn ~/audiocd. Deretter 
kan du, mens du er i mappen ~/audiocd/, kjøre:

cdrecord -v speed=24 dev=ATAPI:/dev/cdrom -pad -audio track*.wav
...END...
Choose not to remove the comments, there are more pages and it seems to 
be working.
Sorry no experience with combos (only with pure CD-RW and DVD-RW) but 
used all kind of tools:
command-line (cdrecord, but not with DVD-RW to write CDR), k3b and 
nautilus-cd-burner.
HTH. Rumen


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/x-pkcs7-signature, Size: 3397 bytes --]