[gentoo-user] Xwindows stopped working. No errors in Xorg log file.

[gentoo-user] Xwindows stopped working. No errors in Xorg log file.

[Daevid Vincent]

I run a pretty stable system. I do however run ~x86 for KDE and Gnome.
Something changed recently in an "emerge -Davu world" or "system" that
causes X to not start anymore? The Xorg log below doesn't have any errors or
warnings or anything. There are no unresolved symbols as the message says. I
did notice that glib was updated, but the "3242-glibc-2.3.5.log" doesn't say
anything interesting. I ran "rm -rf /root/.revdep-rebuild.*; revdep-rebuild
-av" and that said I was golden, it didn't re-compile a single thing. 

I usually use 'meld' (x-windows) for my etc-update, so I do have some files
that need updating, but they don't seem that they should affect X??

daevid portage-logs # etc-update
Scanning Configuration files...
The following is the list of files which need updating, each 
configuration file is followed by a list of possible replacement files.
1) /etc/conf.d/alsasound
/etc/conf.d/._cfg0000_alsasound
2) /etc/init.d/alsasound
/etc/init.d/._cfg0000_alsasound
3) /etc/init.d/checkroot
/etc/init.d/._cfg0000_checkroot
4) /etc/conf.d/clock
/etc/conf.d/._cfg0000_clock
5) /etc/conf.d/domainname
/etc/conf.d/._cfg0000_domainname
6) /etc/filesystems
/etc/._cfg0000_filesystems
7) /etc/init.d/halt.sh
/etc/init.d/._cfg0000_halt.sh
8) /etc/conf.d/hostname
/etc/conf.d/._cfg0000_hostname
9) /etc/inputrc
/etc/._cfg0000_inputrc
10) /etc/init.d/localmount
/etc/init.d/._cfg0000_localmount
11) /etc/init.d/modules
/etc/init.d/._cfg0000_modules
12) /etc/init.d/net.lo
/etc/init.d/._cfg0000_net.lo
13) /etc/init.d/nscd
/etc/init.d/._cfg0000_nscd
14) /etc/pear.conf
/etc/._cfg0000_pear.conf
15) /etc/php/apache2-php4/php.ini
/etc/php/apache2-php4/._cfg0000_php.ini
16) /etc/php/cli-php4/php.ini
/etc/php/cli-php4/._cfg0000_php.ini
17) /etc/profile
/etc/._cfg0000_profile
18) /etc/conf.d/rc
/etc/conf.d/._cfg0000_rc
19) /etc/rc.conf
/etc/._cfg0000_rc.conf
20) /etc/screenrc
/etc/._cfg0000_screenrc
21) /etc/services
/etc/._cfg0000_services
Please select a file to edit by entering the corresponding number.

-----Xorg Log File-----
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.9-gentoo-r1 i686 [ELF] 
Current Operating System: Linux daevid.com 2.6.9-gentoo-r1 #5 Wed Apr 13
01:08:03 PDT 2005 i686
Build Date: 26 June 2005
	Before reporting problems, check http://wiki.X.Org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 18 21:35:14 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) FontPath set to
"/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/s
hare/fonts/CID/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/"
(**) RgbPath set to "/usr/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.2
	X.Org Video Driver: 0.7
	X.Org XInput driver : 0.4
	X.Org Server Extension : 0.2
	X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0691 card 1043,80e7 rev c4 class 06,00,00 hdr
00
(II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev 00 class 06,04,00 hdr
01
(II) PCI: 00:04:0: chip 1106,0686 card 1043,80e7 rev 40 class 06,01,00 hdr
80
(II) PCI: 00:04:1: chip 1106,0571 card 0000,0000 rev 06 class 01,01,8a hdr
00
(II) PCI: 00:04:2: chip 1106,3038 card 0925,1234 rev 1a class 0c,03,00 hdr
00
(II) PCI: 00:04:3: chip 1106,3038 card 0925,1234 rev 1a class 0c,03,00 hdr
00
(II) PCI: 00:04:4: chip 1106,3057 card 0000,0000 rev 40 class 06,00,00 hdr
00
(II) PCI: 00:06:0: chip 1011,0024 card 0000,0000 rev 03 class 06,04,00 hdr
01
(II) PCI: 00:07:0: chip 1106,3038 card 1106,3038 rev 61 class 0c,03,00 hdr
80
(II) PCI: 00:07:1: chip 1106,3038 card 1106,3038 rev 61 class 0c,03,00 hdr
80
(II) PCI: 00:07:2: chip 1106,3104 card 1106,3104 rev 63 class 0c,03,20 hdr
80
(II) PCI: 00:07:3: chip 1106,3044 card 1106,3044 rev 46 class 0c,00,10 hdr
00
(II) PCI: 00:08:0: chip 104c,ac50 card 4000,0000 rev 01 class 06,07,00 hdr
02
(II) PCI: 00:0a:0: chip 1102,0002 card 1102,8027 rev 08 class 04,01,00 hdr
80
(II) PCI: 00:0a:1: chip 1102,7002 card 1102,0020 rev 08 class 09,80,00 hdr
80
(II) PCI: 01:00:0: chip 10de,0185 card 1043,8183 rev c1 class 03,00,00 hdr
80
(II) PCI: 01:00:1: chip 10de,00b0 card 1043,8183 rev c1 class 0c,00,10 hdr
80
(II) PCI: 02:04:0: chip 8086,1229 card 8086,10f0 rev 05 class 02,00,00 hdr
00
(II) PCI: 02:05:0: chip 8086,1229 card 8086,10f0 rev 05 class 02,00,00 hdr
00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xef000000 - 0xf1efffff (0x2f00000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xf3f00000 - 0xf7ffffff (0x4100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:4:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:4:4), (-1,-1,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:6:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
	[0] -1	0	0x0000b000 - 0x0000b0ff (0x100) IX[B]
	[1] -1	0	0x0000b400 - 0x0000b4ff (0x100) IX[B]
	[2] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[B]
	[3] -1	0	0x0000bc00 - 0x0000bcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
	[0] -1	0	0xee000000 - 0xeeffffff (0x1000000) MX[B]
(II) Bus 2 prefetchable memory range:
	[0] -1	0	0xf1f00000 - 0xf3efffff (0x2000000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (0:8:0), (0,3,6), BCTRL: 0x0540 (VGA_EN is cleared)
(II) Bus 3 I/O range:
	[0] -1	0	0x00004000 - 0x000040ff (0x100) IX[B]
	[1] -1	0	0x00004400 - 0x000044ff (0x100) IX[B]
(II) Bus 3 non-prefetchable memory range:
	[0] -1	0	0x2a800000 - 0x2abfffff (0x400000) MX[B]
(II) Bus 3 prefetchable memory range:
	[0] -1	0	0x2a400000 - 0x2a7fffff (0x400000) MX[B]
(--) PCI:*(1:0:0) nVidia Corporation unknown chipset (0x0185) rev 193, Mem @
0xf0000000/24, 0xf4000000/26, BIOS @ 0xf3fe0000/17
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to
0xf7ffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xee000000 - 0xee0fffff (0x100000) MX[B]
	[1] -1	0	0xf2000000 - 0xf2000fff (0x1000) MX[B]
	[2] -1	0	0xee800000 - 0xee8fffff (0x100000) MX[B]
	[3] -1	0	0xf3000000 - 0xf3000fff (0x1000) MX[B]
	[4] -1	0	0xef000000 - 0xef00003f (0x40) MX[B]
	[5] -1	0	0xef800000 - 0xef8007ff (0x800) MX[B]
	[6] -1	0	0xed000000 - 0xed0007ff (0x800) MX[B]
	[7] -1	0	0xed800000 - 0xed8000ff (0x100) MX[B]
	[8] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[9] -1	0	0xf3fe0000 - 0xf3ffffff (0x20000) MX[B](B)
	[10] -1	0	0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
	[11] -1	0	0xf0000000 - 0xf0ffffff (0x1000000) MX[B](B)
	[12] -1	0	0x0000b400 - 0x0000b41f (0x20) IX[B]
	[13] -1	0	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[14] -1	0	0x00009800 - 0x0000981f (0x20) IX[B]
	[15] -1	0	0x0000a000 - 0x0000a07f (0x80) IX[B]
	[16] -1	0	0x0000a400 - 0x0000a41f (0x20) IX[B]
	[17] -1	0	0x0000a800 - 0x0000a81f (0x20) IX[B]
	[18] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
	[19] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[B]
	[20] -1	0	0x0000d800 - 0x0000d80f (0x10) IX[B]
(II) Inactive PCI resource ranges:
	[0] -1	0	0x00009400 - 0x00009407 (0x8) IX[B]
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xee000000 - 0xee0fffff (0x100000) MX[B]
	[1] -1	0	0xf2000000 - 0xf2000fff (0x1000) MX[B]
	[2] -1	0	0xee800000 - 0xee8fffff (0x100000) MX[B]
	[3] -1	0	0xf3000000 - 0xf3000fff (0x1000) MX[B]
	[4] -1	0	0xef000000 - 0xef00003f (0x40) MX[B]
	[5] -1	0	0xef800000 - 0xef8007ff (0x800) MX[B]
	[6] -1	0	0xed000000 - 0xed0007ff (0x800) MX[B]
	[7] -1	0	0xed800000 - 0xed8000ff (0x100) MX[B]
	[8] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[9] -1	0	0xf3fe0000 - 0xf3ffffff (0x20000) MX[B](B)
	[10] -1	0	0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
	[11] -1	0	0xf0000000 - 0xf0ffffff (0x1000000) MX[B](B)
	[12] -1	0	0x0000b400 - 0x0000b41f (0x20) IX[B]
	[13] -1	0	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[14] -1	0	0x00009800 - 0x0000981f (0x20) IX[B]
	[15] -1	0	0x0000a000 - 0x0000a07f (0x80) IX[B]
	[16] -1	0	0x0000a400 - 0x0000a41f (0x20) IX[B]
	[17] -1	0	0x0000a800 - 0x0000a81f (0x20) IX[B]
	[18] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
	[19] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[B]
	[20] -1	0	0x0000d800 - 0x0000d80f (0x10) IX[B]
(II) Inactive PCI resource ranges after removing overlaps:
	[0] -1	0	0x00009400 - 0x00009407 (0x8) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xee000000 - 0xee0fffff (0x100000) MX[B]
	[6] -1	0	0xf2000000 - 0xf2000fff (0x1000) MX[B]
	[7] -1	0	0xee800000 - 0xee8fffff (0x100000) MX[B]
	[8] -1	0	0xf3000000 - 0xf3000fff (0x1000) MX[B]
	[9] -1	0	0xef000000 - 0xef00003f (0x40) MX[B]
	[10] -1	0	0xef800000 - 0xef8007ff (0x800) MX[B]
	[11] -1	0	0xed000000 - 0xed0007ff (0x800) MX[B]
	[12] -1	0	0xed800000 - 0xed8000ff (0x100) MX[B]
	[13] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[14] -1	0	0xf3fe0000 - 0xf3ffffff (0x20000) MX[B](B)
	[15] -1	0	0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
	[16] -1	0	0xf0000000 - 0xf0ffffff (0x1000000) MX[B](B)
	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[19] -1	0	0x0000b400 - 0x0000b41f (0x20) IX[B]
	[20] -1	0	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[21] -1	0	0x00009800 - 0x0000981f (0x20) IX[B]
	[22] -1	0	0x0000a000 - 0x0000a07f (0x80) IX[B]
	[23] -1	0	0x0000a400 - 0x0000a41f (0x20) IX[B]
	[24] -1	0	0x0000a800 - 0x0000a81f (0x20) IX[B]
	[25] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
	[26] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[B]
	[27] -1	0	0x0000d800 - 0x0000d80f (0x10) IX[B]
	[28] -1	0	0x00009400 - 0x00009407 (0x8) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.6629
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 6.8.2, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.6629
	Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.4
(II) NVIDIA X Driver  1.0-6629  Wed Nov  3 13:14:07 PST 2004
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Chipset NVIDIA GPU found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xee000000 - 0xee0fffff (0x100000) MX[B]
	[6] -1	0	0xf2000000 - 0xf2000fff (0x1000) MX[B]
	[7] -1	0	0xee800000 - 0xee8fffff (0x100000) MX[B]
	[8] -1	0	0xf3000000 - 0xf3000fff (0x1000) MX[B]
	[9] -1	0	0xef000000 - 0xef00003f (0x40) MX[B]
	[10] -1	0	0xef800000 - 0xef8007ff (0x800) MX[B]
	[11] -1	0	0xed000000 - 0xed0007ff (0x800) MX[B]
	[12] -1	0	0xed800000 - 0xed8000ff (0x100) MX[B]
	[13] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[14] -1	0	0xf3fe0000 - 0xf3ffffff (0x20000) MX[B](B)
	[15] -1	0	0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
	[16] -1	0	0xf0000000 - 0xf0ffffff (0x1000000) MX[B](B)
	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[19] -1	0	0x0000b400 - 0x0000b41f (0x20) IX[B]
	[20] -1	0	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[21] -1	0	0x00009800 - 0x0000981f (0x20) IX[B]
	[22] -1	0	0x0000a000 - 0x0000a07f (0x80) IX[B]
	[23] -1	0	0x0000a400 - 0x0000a41f (0x20) IX[B]
	[24] -1	0	0x0000a800 - 0x0000a81f (0x20) IX[B]
	[25] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
	[26] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[B]
	[27] -1	0	0x0000d800 - 0x0000d80f (0x10) IX[B]
	[28] -1	0	0x00009400 - 0x00009407 (0x8) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xee000000 - 0xee0fffff (0x100000) MX[B]
	[6] -1	0	0xf2000000 - 0xf2000fff (0x1000) MX[B]
	[7] -1	0	0xee800000 - 0xee8fffff (0x100000) MX[B]
	[8] -1	0	0xf3000000 - 0xf3000fff (0x1000) MX[B]
	[9] -1	0	0xef000000 - 0xef00003f (0x40) MX[B]
	[10] -1	0	0xef800000 - 0xef8007ff (0x800) MX[B]
	[11] -1	0	0xed000000 - 0xed0007ff (0x800) MX[B]
	[12] -1	0	0xed800000 - 0xed8000ff (0x100) MX[B]
	[13] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[14] -1	0	0xf3fe0000 - 0xf3ffffff (0x20000) MX[B](B)
	[15] -1	0	0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
	[16] -1	0	0xf0000000 - 0xf0ffffff (0x1000000) MX[B](B)
	[17] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[18] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[19] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[20] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[21] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[22] -1	0	0x0000b400 - 0x0000b41f (0x20) IX[B]
	[23] -1	0	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[24] -1	0	0x00009800 - 0x0000981f (0x20) IX[B]
	[25] -1	0	0x0000a000 - 0x0000a07f (0x80) IX[B]
	[26] -1	0	0x0000a400 - 0x0000a41f (0x20) IX[B]
	[27] -1	0	0x0000a800 - 0x0000a81f (0x20) IX[B]
	[28] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
	[29] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[B]
	[30] -1	0	0x0000d800 - 0x0000d80f (0x10) IX[B]
	[31] -1	0	0x00009400 - 0x00009407 (0x8) IX[B]
	[32] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[33] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "1"
(**) NVIDIA(0): Option "NvAGP" "1"
(**) NVIDIA(0): Option "RenderAccel" "1"
(**) NVIDIA(0): Option "CursorShadow" "1"
(**) NVIDIA(0): Option "UseEdidFreqs" "1"
(**) NVIDIA(0): Enabling experimental RENDER acceleration
(**) NVIDIA(0): Enabling cursor shadow
(**) NVIDIA(0): Use of NVIDIA internal AGP requested
(--) NVIDIA(0): Linear framebuffer at 0xF4000000
(--) NVIDIA(0): MMIO registers at 0xF0000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce4 MX 4000
(--) NVIDIA(0): VideoBIOS: 04.18.20.47.00
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): VideoRAM: 65536 kBytes
(II) NVIDIA(0): Connected display device(s): CRT-0
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at  8 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 32 bpp: 350 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
(WW) NVIDIA(0): Failure reading EDID parameters for display device CRT-0
(WW) NVIDIA(0): Unable to use EDID frequencies for display device CRT-0 (no
(WW) NVIDIA(0):      EDID found)
(II) NVIDIA(0): Monitor0: Using hsync range of 31.00-91.00 kHz
(II) NVIDIA(0): Monitor0: Using vrefresh range of 50.00-150.00 Hz
(II) NVIDIA(0): Clock range:  12.00 to 350.00 MHz
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (width too large for
virtual size)
(II) NVIDIA(0): Not using default mode "1856x1392" (width too large for
virtual size)
(II) NVIDIA(0): Not using default mode "1792x1344" (width too large for
virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for
virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for
virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for
virtual size)
(II) NVIDIA(0): Not using default mode "1400x1050" (width too large for
virtual size)
(II) NVIDIA(0): Not using default mode "1400x1050" (width too large for
virtual size)
(WW) NVIDIA(0): Not using mode "1152x768":
(WW) NVIDIA(0):   horizontal sync start (1178) not a multiple of 8
(WW) NVIDIA(0): Not using mode "576x384":
(WW) NVIDIA(0):   horizontal sync start (589) not a multiple of 8
(WW) NVIDIA(0): Not using mode "360x200":
(WW) NVIDIA(0):   horizontal sync start (378) not a multiple of 8
(**) NVIDIA(0): Validated modes for display device CRT-0:
(**) NVIDIA(0):      Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz
(**) NVIDIA(0):      Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(**) NVIDIA(0):      Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) NVIDIA(0):      Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D)
(**) NVIDIA(0):      Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(**) NVIDIA(0):      Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(**) NVIDIA(0):      Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz
(**) NVIDIA(0):      Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(**) NVIDIA(0):      Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(**) NVIDIA(0):      Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(**) NVIDIA(0):      Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(**) NVIDIA(0):      Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(**) NVIDIA(0):      Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.0 Hz
(I)
(**) NVIDIA(0):      Default mode "960x720": 117.0 MHz, 90.0 kHz, 60.0 Hz
(D)
(**) NVIDIA(0):      Default mode "928x696": 109.2 MHz, 86.4 kHz, 60.1 Hz
(D)
(**) NVIDIA(0):      Default mode "896x672": 102.4 MHz, 83.7 kHz, 60.0 Hz
(D)
(**) NVIDIA(0):      Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(**) NVIDIA(0):      Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(**) NVIDIA(0):      Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(**) NVIDIA(0):      Default mode "800x600": 94.5 MHz, 87.5 kHz, 70.0 Hz (D)
(**) NVIDIA(0):      Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
(**) NVIDIA(0):      Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NVIDIA(0):      Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0):      Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(**) NVIDIA(0):      Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
(**) NVIDIA(0):      Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(**) NVIDIA(0):      Default mode "640x512": 78.8 MHz, 91.1 kHz, 85.0 Hz (D)
(**) NVIDIA(0):      Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(**) NVIDIA(0):      Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0):      Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(**) NVIDIA(0):      Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(**) NVIDIA(0):      Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(**) NVIDIA(0):      Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(**) NVIDIA(0):      Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0):      Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(**) NVIDIA(0):      Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0):      Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0):      Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0):      Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(**) NVIDIA(0):      Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(**) NVIDIA(0):      Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(**) NVIDIA(0):      Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(**) NVIDIA(0):      Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.9 Hz (D)
(**) NVIDIA(0):      Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(**) NVIDIA(0):      Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(**) NVIDIA(0):      Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(**) NVIDIA(0):      Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(**) NVIDIA(0):      Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(**) NVIDIA(0):      Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(**) NVIDIA(0):      Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(**) NVIDIA(0):      Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0):      Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(**) NVIDIA(0):      Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(**) NVIDIA(0):      Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(**) NVIDIA(0):      Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(==) NVIDIA(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
	compiled for 6.8.2, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.7
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xf4000000 - 0xf7ffffff (0x4000000) MX[B]
	[1] 0	0	0xf0000000 - 0xf0ffffff (0x1000000) MX[B]
	[2] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[3] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[7] -1	0	0xee000000 - 0xee0fffff (0x100000) MX[B]
	[8] -1	0	0xf2000000 - 0xf2000fff (0x1000) MX[B]
	[9] -1	0	0xee800000 - 0xee8fffff (0x100000) MX[B]
	[10] -1	0	0xf3000000 - 0xf3000fff (0x1000) MX[B]
	[11] -1	0	0xef000000 - 0xef00003f (0x40) MX[B]
	[12] -1	0	0xef800000 - 0xef8007ff (0x800) MX[B]
	[13] -1	0	0xed000000 - 0xed0007ff (0x800) MX[B]
	[14] -1	0	0xed800000 - 0xed8000ff (0x100) MX[B]
	[15] -1	0	0xf8000000 - 0xf7ffffff (0x0) MX[B]O
	[16] -1	0	0xf3fe0000 - 0xf3ffffff (0x20000) MX[B](B)
	[17] -1	0	0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
	[18] -1	0	0xf0000000 - 0xf0ffffff (0x1000000) MX[B](B)
	[19] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[20] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[21] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[22] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[23] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[24] -1	0	0x0000b400 - 0x0000b41f (0x20) IX[B]
	[25] -1	0	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[26] -1	0	0x00009800 - 0x0000981f (0x20) IX[B]
	[27] -1	0	0x0000a000 - 0x0000a07f (0x80) IX[B]
	[28] -1	0	0x0000a400 - 0x0000a41f (0x20) IX[B]
	[29] -1	0	0x0000a800 - 0x0000a81f (0x20) IX[B]
	[30] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
	[31] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[B]
	[32] -1	0	0x0000d800 - 0x0000d80f (0x10) IX[B]
	[33] -1	0	0x00009400 - 0x00009407 (0x8) IX[B]
	[34] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[35] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(**) NVIDIA(0): Option "BackingStore" "1"
(**) NVIDIA(0): Backing store enabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX

   *** If unresolved symbols were reported above, they might not
   *** be the reason for the server aborting.

Fatal server error:
Caught signal 11.  Server aborting


Please consult the The X.Org Foundation support 
	 at http://wiki.X.Org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional
information.


-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Xwindows stopped working. No errors in Xorg log file.

[Bob Sanders]

On Tue, 19 Jul 2005 14:57:47 -0700
"Daevid Vincent" <daevid@daevid.com> wrote:

> I run a pretty stable system. I do however run ~x86 for KDE and Gnome.
> Something changed recently in an "emerge -Davu world" or "system" that
> causes X to not start anymore?

If you are not doing the script updates, then you are not running a stable system.  Please
do all the script updates, then reboot your system.


> 	[0] -1	0	0x2a400000 - 0x2a7fffff (0x400000) MX[B]
> (--) PCI:*(1:0:0) nVidia Corporation unknown chipset (0x0185) rev 193, Mem @

Seems the driver you are running doesn't know which chip is on the Gfx card.
Perhaps you should add ~x86 to nvidia-kernel and nvidia-glx.

FWIW - I have to restart X - ^ALTDEL, about 3 times to get a visible display with
		the nvidia driver - 7667, but that's due to the 6600GT I'm running.  Maybe
		they'll get a new bios out for it.  But once started it runs fine at 1280x1024.
		I even get 3D acceleration.

Bob
-- 
-  
-- 
gentoo-user@gentoo.org mailing list

RE: [gentoo-user] Xwindows stopped working. No errors in Xorg log file.

[Daevid Vincent]

> > I run a pretty stable system. I do however run ~x86 for KDE 
> and Gnome.
> > Something changed recently in an "emerge -Davu world" or 
> "system" that
> > causes X to not start anymore?
> 
> If you are not doing the script updates, then you are not 
> running a stable system.  Please
> do all the script updates, then reboot your system.

Well, I do run the etc-update stuff, however I do it from X-windows and
using 'meld' to graphically see the diffs. So I have a bit of a catch-22
here.

Can you tell me how I can remotely run 'meld' / 'etc-update' on my
notebook's X-windows off of the server? Then I can apply the other
etc-updates. Can this even be done, since I can't get X to start on the
server?

> > 	[0] -1	0	0x2a400000 - 0x2a7fffff (0x400000) MX[B]
> > (--) PCI:*(1:0:0) nVidia Corporation unknown chipset 
> (0x0185) rev 193, Mem @
> 
> Seems the driver you are running doesn't know which chip is 
> on the Gfx card.
> Perhaps you should add ~x86 to nvidia-kernel and nvidia-glx.

I have been using the nvidia stable emerge drivers and I haven't upgraded
the kernel AFAIK.

I guess I'll try to re-emerge the nvidia drivers. The last ~x86 version of
them really hosed up X good, so I decided on this box, to run the stable
ones. 

-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Xwindows stopped working. No errors in Xorg log file.

[Rumen Yotov]

[-- Attachment #1: Type: text/plain, Size: 1738 bytes --]

Daevid Vincent wrote:

>>>I run a pretty stable system. I do however run ~x86 for KDE 
>>>      
>>>
>>and Gnome.
>>    
>>
>>>Something changed recently in an "emerge -Davu world" or 
>>>      
>>>
>>"system" that
>>    
>>
>>>causes X to not start anymore?
>>>      
>>>
>>If you are not doing the script updates, then you are not 
>>running a stable system.  Please
>>do all the script updates, then reboot your system.
>>    
>>
>
>Well, I do run the etc-update stuff, however I do it from X-windows and
>using 'meld' to graphically see the diffs. So I have a bit of a catch-22
>here.
>
>Can you tell me how I can remotely run 'meld' / 'etc-update' on my
>notebook's X-windows off of the server? Then I can apply the other
>etc-updates. Can this even be done, since I can't get X to start on the
>server?
>
>  
>
>>>	[0] -1	0	0x2a400000 - 0x2a7fffff (0x400000) MX[B]
>>>(--) PCI:*(1:0:0) nVidia Corporation unknown chipset 
>>>      
>>>
>>(0x0185) rev 193, Mem @
>>
>>Seems the driver you are running doesn't know which chip is 
>>on the Gfx card.
>>Perhaps you should add ~x86 to nvidia-kernel and nvidia-glx.
>>    
>>
>
>I have been using the nvidia stable emerge drivers and I haven't upgraded
>the kernel AFAIK.
>
>I guess I'll try to re-emerge the nvidia drivers. The last ~x86 version of
>them really hosed up X good, so I decided on this box, to run the stable
>ones. 
>
>  
>
Hi,
Quite easy, just edit "/etc/etc-update.conf" before running "etc-update".
Change "diff-command=diff -uN %file1 %file2" and "using_editor=0". Later 
could run it in text-mode.
Or use "dispatch-conf, it makes a backup of the updated files in 
/etc/config-archive. Check the diffs afterwards.
When X starts again restore your settings.
HTH. Rumen

[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/x-pkcs7-signature, Size: 3397 bytes --]

RE: [gentoo-user] Xwindows stopped working. No errors in Xorg log file. [SOLVED]

[Daevid Vincent]

Well, I just re-emerged the nvidia drivers. They were basically the same
version, just a new -r part. 

*  media-video/nvidia-glx
      Latest version available: 1.0.6629-r6
      Latest version installed: 1.0.6629-r1
      Size of downloaded files: 16,116 kB
      Homepage:    http://www.nvidia.com/
      Description: NVIDIA X11 driver and GLX libraries
      License:     NVIDIA

*  media-video/nvidia-kernel
      Latest version available: 1.0.6629-r4
      Latest version installed: 1.0.6629-r1
      Size of downloaded files: 16,116 kB
      Homepage:    http://www.nvidia.com/
      Description: Linux kernel module for the NVIDIA X11 driver
      License:     NVIDIA 

And luckily that fixed X-windows. I don't know why this broke. My kernel is
the same. But, I'm just glad this fixed it... Dunno why I didn't consider
this in the first place. I guess I only think of re-compiling the nVidia
drivers *IF* I change my kernel. Well, I guess I know this now for the
future in case. Thanks Bob for pointing out the obvious to me. ;-)

> -----Original Message-----
> From: Bob Sanders [mailto:rmsand@concentric.net] 
> Sent: Tuesday, July 19, 2005 7:17 PM
> To: gentoo-user@lists.gentoo.org
> Subject: Re: [gentoo-user] Xwindows stopped working. No 
> errors in Xorg log file.
> 
> On Tue, 19 Jul 2005 14:57:47 -0700
> "Daevid Vincent" <daevid@daevid.com> wrote:
> 
> > I run a pretty stable system. I do however run ~x86 for KDE 
> and Gnome.
> > Something changed recently in an "emerge -Davu world" or 
> "system" that
> > causes X to not start anymore?
> 
> If you are not doing the script updates, then you are not 
> running a stable system.  Please
> do all the script updates, then reboot your system.
> 
> 
> > 	[0] -1	0	0x2a400000 - 0x2a7fffff (0x400000) MX[B]
> > (--) PCI:*(1:0:0) nVidia Corporation unknown chipset 
> (0x0185) rev 193, Mem @
> 
> Seems the driver you are running doesn't know which chip is 
> on the Gfx card.
> Perhaps you should add ~x86 to nvidia-kernel and nvidia-glx.
> 
> FWIW - I have to restart X - ^ALTDEL, about 3 times to get a 
> visible display with
> 		the nvidia driver - 7667, but that's due to the 
> 6600GT I'm running.  Maybe
> 		they'll get a new bios out for it.  But once 
> started it runs fine at 1280x1024.
> 		I even get 3D acceleration.
> 
> Bob
> -- 
> -  
> -- 
> gentoo-user@gentoo.org mailing list
> 
> 

-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Xwindows stopped working. No errors in Xorg log file.

[Richard Fish]

Daevid Vincent wrote:

>I run a pretty stable system. I do however run ~x86 for KDE and Gnome.
>Something changed recently in an "emerge -Davu world" or "system" that
>causes X to not start anymore? The Xorg log below doesn't have any errors or
>warnings or anything. There are no unresolved symbols as the message says. I
>did notice that glib was updated, but the "3242-glibc-2.3.5.log" doesn't say
>anything interesting. I ran "rm -rf /root/.revdep-rebuild.*; revdep-rebuild
>-av" and that said I was golden, it didn't re-compile a single thing. 
>  
>

One of the things we just discovered on this list is that newer versions 
of KDE are trying to use things like the Composite extension, and it is 
causing problems for some people (slowness was the previous case).

Some things to try:

1. Disable Composite.
2. Disable DRI.
3. Try the x.org "nv" driver instead of "nvidia".

Depending upon whether and which one of those work, you will have a 
place to start from on more debugging.

-Richard


>I usually use 'meld' (x-windows) for my etc-update, so I do have some files
>that need updating, but they don't seem that they should affect X??
>
>  
>

Probably not...more likely opengl or composite is causing the problem for X.


-Richard

-- 
gentoo-user@gentoo.org mailing list

RE: [gentoo-user] Xwindows stopped working. No errors in Xorg log file.

[Daevid Vincent]

I tried to switch my window manager to Gnome and also XFCE (both worked fine
before too) and that didn't solve the problem, so I don't think it's a KDE
thing. But I have had KDE problems before as you suggest with other nvidia
drivers. 

> -----Original Message-----
> From: Richard Fish [mailto:bigfish@asmallpond.org] 
> Sent: Tuesday, July 19, 2005 10:18 PM
> To: gentoo-user@lists.gentoo.org
> Subject: Re: [gentoo-user] Xwindows stopped working. No 
> errors in Xorg log file.
> 
> Daevid Vincent wrote:
> 
> >I run a pretty stable system. I do however run ~x86 for KDE 
> and Gnome.
> >Something changed recently in an "emerge -Davu world" or 
> "system" that
> >causes X to not start anymore? The Xorg log below doesn't 
> have any errors or
> >warnings or anything. There are no unresolved symbols as the 
> message says. I
> >did notice that glib was updated, but the 
> "3242-glibc-2.3.5.log" doesn't say
> >anything interesting. I ran "rm -rf /root/.revdep-rebuild.*; 
> revdep-rebuild
> >-av" and that said I was golden, it didn't re-compile a 
> single thing. 
> >  
> >
> 
> One of the things we just discovered on this list is that 
> newer versions 
> of KDE are trying to use things like the Composite extension, 
> and it is 
> causing problems for some people (slowness was the previous case).
> 
> Some things to try:
> 
> 1. Disable Composite.
> 2. Disable DRI.
> 3. Try the x.org "nv" driver instead of "nvidia".
> 
> Depending upon whether and which one of those work, you will have a 
> place to start from on more debugging.
> 
> -Richard
> 
> 
> >I usually use 'meld' (x-windows) for my etc-update, so I do 
> have some files
> >that need updating, but they don't seem that they should affect X??
> >
> >  
> >
> 
> Probably not...more likely opengl or composite is causing the 
> problem for X.
> 
> 
> -Richard
> 
> -- 
> gentoo-user@gentoo.org mailing list
> 
> 

-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Xwindows stopped working. No errors in Xorg log file.

[Daniel da Veiga]

I've never been able to use the drivers at the portage tree for my
nvidia card, always used the ones downloaded directly from their
website, because the ones from portage gave me errors. Besides the
task to redo the installation each time I recompile the kernel, there
were no problems, ever.

Try it.

On 7/20/05, Daevid Vincent <daevid@daevid.com> wrote:
> I tried to switch my window manager to Gnome and also XFCE (both worked fine
> before too) and that didn't solve the problem, so I don't think it's a KDE
> thing. But I have had KDE problems before as you suggest with other nvidia
> drivers.
> 
> > -----Original Message-----
> > From: Richard Fish [mailto:bigfish@asmallpond.org]
> > Sent: Tuesday, July 19, 2005 10:18 PM
> > To: gentoo-user@lists.gentoo.org
> > Subject: Re: [gentoo-user] Xwindows stopped working. No
> > errors in Xorg log file.
> >
> > Daevid Vincent wrote:
> >
> > >I run a pretty stable system. I do however run ~x86 for KDE
> > and Gnome.
> > >Something changed recently in an "emerge -Davu world" or
> > "system" that
> > >causes X to not start anymore? The Xorg log below doesn't
> > have any errors or
> > >warnings or anything. There are no unresolved symbols as the
> > message says. I
> > >did notice that glib was updated, but the
> > "3242-glibc-2.3.5.log" doesn't say
> > >anything interesting. I ran "rm -rf /root/.revdep-rebuild.*;
> > revdep-rebuild
> > >-av" and that said I was golden, it didn't re-compile a
> > single thing.
> > >
> > >
> >
> > One of the things we just discovered on this list is that
> > newer versions
> > of KDE are trying to use things like the Composite extension,
> > and it is
> > causing problems for some people (slowness was the previous case).
> >
> > Some things to try:
> >
> > 1. Disable Composite.
> > 2. Disable DRI.
> > 3. Try the x.org "nv" driver instead of "nvidia".
> >
> > Depending upon whether and which one of those work, you will have a
> > place to start from on more debugging.
> >
> > -Richard
> >
> >
> > >I usually use 'meld' (x-windows) for my etc-update, so I do
> > have some files
> > >that need updating, but they don't seem that they should affect X??
> > >
> > >
> > >
> >
> > Probably not...more likely opengl or composite is causing the
> > problem for X.
> >
> >
> > -Richard
> >
> > --
> > gentoo-user@gentoo.org mailing list
> >
> >
> 
> --
> gentoo-user@gentoo.org mailing list
> 
> 


-- 
Daniel da Veiga
Computer Operator - RS - Brazil

-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Xwindows stopped working. No errors in Xorg log file.

[George Roberts]

Daevid Vincent wrote:

>I tried to switch my window manager to Gnome and also XFCE (both worked fine
>before too) and that didn't solve the problem, so I don't think it's a KDE
>thing. But I have had KDE problems before as you suggest with other nvidia
>drivers. 
>
>  
>
>>-----Original Message-----
>>From: Richard Fish [mailto:bigfish@asmallpond.org] 
>>Sent: Tuesday, July 19, 2005 10:18 PM
>>To: gentoo-user@lists.gentoo.org
>>Subject: Re: [gentoo-user] Xwindows stopped working. No 
>>errors in Xorg log file.
>>
>>Daevid Vincent wrote:
>>
>>    
>>
>>>I run a pretty stable system. I do however run ~x86 for KDE 
>>>      
>>>
>>and Gnome.
>>    
>>
>>>Something changed recently in an "emerge -Davu world" or 
>>>      
>>>
>>"system" that
>>    
>>
>>>causes X to not start anymore? The Xorg log below doesn't 
>>>      
>>>
>>have any errors or
>>    
>>
>>>warnings or anything. There are no unresolved symbols as the 
>>>      
>>>
>>message says. I
>>    
>>
>>>did notice that glib was updated, but the 
>>>      
>>>
>>"3242-glibc-2.3.5.log" doesn't say
>>    
>>
>>>anything interesting. I ran "rm -rf /root/.revdep-rebuild.*; 
>>>      
>>>
>>revdep-rebuild
>>    
>>
>>>-av" and that said I was golden, it didn't re-compile a 
>>>      
>>>
>>single thing. 
>>    
>>
>>> 
>>>
>>>      
>>>
>>One of the things we just discovered on this list is that 
>>newer versions 
>>of KDE are trying to use things like the Composite extension, 
>>and it is 
>>causing problems for some people (slowness was the previous case).
>>
>>Some things to try:
>>
>>1. Disable Composite.
>>2. Disable DRI.
>>3. Try the x.org "nv" driver instead of "nvidia".
>>
>>Depending upon whether and which one of those work, you will have a 
>>place to start from on more debugging.
>>
>>-Richard
>>
>>
>>    
>>
>>>I usually use 'meld' (x-windows) for my etc-update, so I do 
>>>      
>>>
>>have some files
>>    
>>
>>>that need updating, but they don't seem that they should affect X??
>>>
>>> 
>>>
>>>      
>>>
>>Probably not...more likely opengl or composite is causing the 
>>problem for X.
>>
>>
>>-Richard
>>
>>-- 
>>gentoo-user@gentoo.org mailing list
>>
>>
>>    
>>
>
>  
>
What login manager are you using Gdm or Xdm, I have been using Gdm 
untill a while back and now after an update my X will not start using 
gdm in my /etc/rc.conf.  If I change it to Xdm in /etc/rc.conf or type 
it in manually then X starts  and  I can get in Gnome.  Changing the  
Nvidia drivers has had no effect.
-- 
gentoo-user@gentoo.org mailing list

RE: [gentoo-user] Xwindows stopped working. No errors in Xorg log file.

[Daevid Vincent]

I don't use a login manager. It's a server and I really only use X-windows
for maintenance and 'meld'. So I "startx" manually after logging in to the
shell.

> What login manager are you using Gdm or Xdm, I have been using Gdm 
> untill a while back and now after an update my X will not start using 
> gdm in my /etc/rc.conf.  If I change it to Xdm in 
> /etc/rc.conf or type 
> it in manually then X starts  and  I can get in Gnome.  Changing the  
> Nvidia drivers has had no effect.

-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Xwindows stopped working. No errors in Xorg log file.

[charlyghislain]

> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
> (II) Loading /usr/X11R6/lib/modules/libfb.a
> (II) Module fb: vendor="X.Org Foundation"
> 	compiled for 6.8.2, module version = 1.0.0
> 	ABI class: X.Org ANSI C Emulation, version 0.2
> (II) Loading sub module "ramdac"
> (II) LoadModule: "ramdac"
> (II) Loading /usr/X11R6/lib/modules/libramdac.a
> (II) Module ramdac: vendor="X.Org Foundation"
> 	compiled for 6.8.2, module version = 0.1.0
> 	ABI class: X.Org Video Driver, version 0.7
> (--) Depth 24 pixmap format is 32 bpp
> (II) do I need RAC?  No, I don't.

I was just wondering, whats this fb module? framebuffer? is it needed?

charly
-- 
gentoo-user@gentoo.org mailing list