* [gentoo-user] AMI MegaRAID 428 Ultra SCSI RAID Controller
@ 2005-07-07 3:00 Colin
2005-07-07 7:09 ` Daniel Drake
0 siblings, 1 reply; 3+ messages in thread
From: Colin @ 2005-07-07 3:00 UTC (permalink / raw
To: gentoo-user
It's not being detected under the LiveCD. I booted with doscsi, but I
don't see /dev/sda. In addition, lspci tells me this:
0000:00:11.0 Unknown mass storage controller: American Megatrends Inc.
MegaRAID 428 Ultra RAID Controller (rev 04)
What do I do?
--
Colin
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [gentoo-user] AMI MegaRAID 428 Ultra SCSI RAID Controller
2005-07-07 3:00 [gentoo-user] AMI MegaRAID 428 Ultra SCSI RAID Controller Colin
@ 2005-07-07 7:09 ` Daniel Drake
2005-07-08 6:51 ` Colin
0 siblings, 1 reply; 3+ messages in thread
From: Daniel Drake @ 2005-07-07 7:09 UTC (permalink / raw
To: gentoo-user
Colin wrote:
> It's not being detected under the LiveCD. I booted with doscsi, but I
> don't see /dev/sda. In addition, lspci tells me this:
>
> 0000:00:11.0 Unknown mass storage controller: American Megatrends Inc.
> MegaRAID 428 Ultra RAID Controller (rev 04)
>
> What do I do?
We should be supporting this hardware as of our 2005.1 release.
Any chance you could post the "lspci -n" output?
Thanks,
Daniel
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [gentoo-user] AMI MegaRAID 428 Ultra SCSI RAID Controller
2005-07-07 7:09 ` Daniel Drake
@ 2005-07-08 6:51 ` Colin
0 siblings, 0 replies; 3+ messages in thread
From: Colin @ 2005-07-08 6:51 UTC (permalink / raw
To: gentoo-user
Daniel Drake wrote:
>Colin wrote:
>
>
>>It's not being detected under the LiveCD. I booted with doscsi, but I
>>don't see /dev/sda. In addition, lspci tells me this:
>>
>>0000:00:11.0 Unknown mass storage controller: American Megatrends Inc.
>>MegaRAID 428 Ultra RAID Controller (rev 04)
>>
>>What do I do?
>>
>>
>
>We should be supporting this hardware as of our 2005.1 release.
>
>Any chance you could post the "lspci -n" output?
>
The system's online right now, but once it finishes installing, I'll
shut it down and put the card back in. It might take a few days at this
rate (stage1 on a Pentium II, no distcc), but you'll get your lspci -n.
--
Colin
--
gentoo-user@gentoo.org mailing list
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-07-08 6:56 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-07-07 3:00 [gentoo-user] AMI MegaRAID 428 Ultra SCSI RAID Controller Colin
2005-07-07 7:09 ` Daniel Drake
2005-07-08 6:51 ` Colin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox