From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (qmail 22392 invoked from network); 4 Dec 2004 21:16:01 +0000 Received: from smtp.gentoo.org (156.56.111.197) by lists.gentoo.org with AES256-SHA encrypted SMTP; 4 Dec 2004 21:16:01 +0000 Received: from lists.gentoo.org ([156.56.111.196] helo=parrot.gentoo.org) by smtp.gentoo.org with esmtp (Exim 4.41) id 1CahG4-0004KI-Jf for arch-gentoo-user@lists.gentoo.org; Sat, 04 Dec 2004 21:16:00 +0000 Received: (qmail 16099 invoked by uid 89); 4 Dec 2004 21:15:38 +0000 Mailing-List: contact gentoo-user-help@gentoo.org; run by ezmlm Precedence: bulk List-Post: List-Help: List-Unsubscribe: List-Subscribe: List-Id: Gentoo Linux mail Reply-To: gentoo-user@lists.gentoo.org X-BeenThere: gentoo-user@gentoo.org Received: (qmail 14089 invoked from network); 4 Dec 2004 21:15:38 +0000 Message-ID: <41B1B88D.5030909@softhome.net> Date: Sat, 04 Dec 2004 13:15:57 +0000 From: Sergei Olonichev User-Agent: Mozilla Thunderbird 0.8 (X11/20041128) X-Accept-Language: en-us, en MIME-Version: 1.0 To: gentoo-amd64@lists.gentoo.org, gentoo-user@lists.gentoo.org X-Enigmail-Version: 0.86.0.0 X-Enigmail-Supports: pgp-inline, pgp-mime Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: [gentoo-user] Gentoo 2004.3 x86_64: having problems with keyboard and touch pad on eMachines laptop X-Archives-Salt: e97e3620-36e2-47eb-b97d-f04ad29cb1a2 X-Archives-Hash: 8648d0931ee75cd406b0bd1622775f87 Hello All! I installed Gentoo 2004.3 x86_64 on eMachines M6809 notebook. Everything works as expected except the built-in keyboard and touchpad (now I am using USB mouse and keyboard). There are some suggestions in internet to update BIOS and/or change kernel configuration but I don't wanna update bios and kernel my configuration seems to be fine. So, my question is: does anyone have similar configuration and have built-in keyboard and touch-pad working? Or what's wrong with my configuration? Some more info: they do not work in both console and X; in grub prompt built-in keyboard works fine; xev does not receive any messages from these devices. Thanks, Sergei P.S. Here is my lspci, xorg.conf, dmesg output and relevant parts from kernel config (sorry for the big size). ###################### lspci ###################### 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800 South] 0000:00:0a.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller 0000:00:0c.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) 0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge 0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50) 0000:00:11.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97 Modem] (rev 80) 0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) 0000:00:13.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] ###################### end of lspci ###################### ###################### xorg.conf ###################### Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "ServerFlags" # Set the basic blanking screen saver timeout. in minutes Option "blank time" "10" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib64/modules" FontPath "/usr/share/fonts/misc/" FontPath "/usr/share/fonts/TTF/" FontPath "/usr/share/fonts/Type1/" FontPath "/usr/share/fonts/CID/" FontPath "/usr/share/fonts/75dpi/" FontPath "/usr/share/fonts/100dpi/" EndSection Section "Module" Load "record" Load "extmod" Load "dbe" Load "dri" Load "glx" Load "xtrap" Load "freetype" Load "type1" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc104" Option "XkbLayout" "us" Option "XkbVariant" "" Option "XkbOptions" "" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/mouse" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: : integer, : float, : "True"/"False", ### : "String", : " Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [] #Option "SWcursor" # [] #Option "Dac6Bit" # [] #Option "Dac8Bit" # [] #Option "BusType" # [] #Option "CPPIOMode" # [] #Option "CPusecTimeout" # #Option "AGPMode" # #Option "AGPFastWrite" # [] #Option "AGPSize" # #Option "GARTSize" # #Option "RingSize" # #Option "BufferSize" # #Option "EnableDepthMoves" # [] #Option "EnablePageFlip" # [] #Option "NoBackBuffer" # [] #Option "DRIReinit" # [] #Option "PanelOff" # [] #Option "DDCMode" # [] #Option "MonitorLayout" # [] #Option "IgnoreEDID" # [] #Option "UseFBDev" # [] #Option "VideoKey" # #Option "MergedFB" # [] #Option "CRT2HSync" # [] #Option "CRT2VRefresh" # [] #Option "CRT2Position" # [] #Option "MetaModes" # [] #Option "MergedDPI" # [] #Option "NoMergedXinerama" # [] #Option "MergedXineramaCRT2IsScreen0" # [] #Option "DisplayPriority" # [] #Option "PanelSize" # [] #Option "ForceMinDotClock" # #Option "RenderAccel" # [] #Option "SubPixelOrder" # [] #Option "ShowCache" # [] #Option "DynamicClocks" # [] Identifier "Card0" Driver "ati" VendorName "ATI Technologies Inc" BoardName "RV350 [Mobility Radeon 9600 M10]" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection ###################### end of xorg.conf ###################### ###################### dmesg output ###################### Bootdata ok (command line is root=/dev/hda3 noapic acpi=off) Linux version 2.6.9-gentoo-r111.24 (root@sergeio) (gcc version 3.4.2 (Gentoo Linux 3.4.2-r2, ssp-3.4.1-1, pie-8.7.6.5)) #2 Wed Nov 24 23:17:49 UTC 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fef0000 (usable) BIOS-e820: 000000001fef0000 - 000000001fefb000 (ACPI data) BIOS-e820: 000000001fefb000 - 000000001ff00000 (ACPI NVS) BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved) BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) No mptable found. On node 0 totalpages: 130800 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126704 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: <6>Product ID: <6>APIC at: 0xFEE00000 Processor #0 15:4 APIC version 16 I/O APIC #1 Version 3 at 0xFEC00000. Processors: 1 Checking aperture... CPU 0: aperture @ e0000000 size 256 MB Built 1 zonelists Kernel command line: root=/dev/hda3 noapic acpi=off console=tty0 Initializing CPU#0 PID hash table entries: 2048 (order: 11, 65536 bytes) time.c: Using 1.193182 MHz PIT timer. time.c: Detected 2004.614 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Memory: 509316k/523200k available (3155k kernel code, 13116k reserved, 1346k data, 184k init) Calibrating delay loop... 3948.54 BogoMIPS (lpj=1974272) Mount-cache hash table entries: 256 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Mobile AMD Athlon(tm) 64 Processor 3200+ stepping 0a Using local APIC NMI watchdog using perfctr0 Using local APIC timer interrupts. Detected 12.528 MHz APIC timer. NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router VIA [1106/3177] at 0000:00:11.0 PCI: IRQ 0 for device 0000:00:0a.0 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 11 for device 0000:00:0a.0 PCI: Sharing IRQ 11 with 0000:00:10.1 PCI: IRQ 0 for device 0000:00:11.1 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 9 for device 0000:00:11.1 PCI: Sharing IRQ 9 with 0000:00:0c.0 PCI: Sharing IRQ 9 with 0000:00:10.0 PCI: Sharing IRQ 9 with 0000:00:12.0 PCI: Sharing IRQ 9 with 0000:01:00.0 TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca) agpgart: Detected AGP bridge 0 agpgart: Maximum main memory to use for agp memory: 438M agpgart: AGP aperture is 256M @ 0xe0000000 PCI-DMA: Disabling IOMMU. IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ Total HugeTLB memory allocated, 0 devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 SGI XFS with ACLs, large block/inode numbers, no debug enabled Initializing Cryptographic API pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 inotify init: minor=63 Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 Linux agpgart interface v0.100 (c) Dave Jones PCI: Found IRQ 9 for device 0000:01:00.0 PCI: Sharing IRQ 9 with 0000:00:0c.0 PCI: Sharing IRQ 9 with 0000:00:10.0 PCI: Sharing IRQ 9 with 0000:00:11.1 PCI: Sharing IRQ 9 with 0000:00:12.0 radeonfb: Retreived PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=6) Memory=300.00 Mhz, System=200.00 MHz Non-DDC laptop panel detected radeonfb: Monitor 1 type LCD found radeonfb: Monitor 2 type no found radeonfb: panel ID string: Samsung LTN154X1 WXGA radeonfb: detected LVDS panel size from BIOS: 1280x800 radeondb: BIOS provided dividers will be used radeonfb: Power Management enabled for Mobility chipsets Console: switching to colour frame buffer device 160x50 radeonfb: ATI Radeon NP SDR SGRAM 64 MB vesafb: probe of vesafb0 failed with error -6 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled mice: PS/2 mouse device common for all mice RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker PCI: Found IRQ 9 for device 0000:00:12.0 PCI: Sharing IRQ 9 with 0000:00:0c.0 PCI: Sharing IRQ 9 with 0000:00:10.0 PCI: Sharing IRQ 9 with 0000:00:11.1 PCI: Sharing IRQ 9 with 0000:01:00.0 eth0: VIA Rhine II at 0x1800, 00:03:25:10:b7:e2, IRQ 9. eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 41e1. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 PCI: Found IRQ 9 for device 0000:00:11.1 PCI: Sharing IRQ 9 with 0000:00:0c.0 PCI: Sharing IRQ 9 with 0000:00:10.0 PCI: Sharing IRQ 9 with 0000:00:12.0 PCI: Sharing IRQ 9 with 0000:01:00.0 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0x1ce0-0x1ce7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1ce8-0x1cef, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: IC25N080ATMR04-0, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: Slimtype DVDRW SDW-431S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 1024KiB hda: 156301488 sectors (80026 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: automatically using best checksumming function: generic_sse generic_sse: 6084.000 MB/sec raid5: using function: generic_sse (6084.000 MB/sec) raid6: int64x1 1640 MB/s raid6: int64x2 2355 MB/s raid6: int64x4 2515 MB/s raid6: int64x8 1703 MB/s raid6: sse2x1 1195 MB/s raid6: sse2x2 1980 MB/s raid6: sse2x4 2761 MB/s raid6: using algorithm sse2x4 (2761 MB/s) md: raid6 personality registered as nr 8 md: multipath personality registered as nr 7 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@redhat.com Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15 07:17:53 2004 UTC). ALSA device list: No soundcards found. NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09b) powernow-k8: BIOS error: numpst must be 1 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. ReiserFS: hda3: found reiserfs format "3.6" with standard journal ReiserFS: hda3: using ordered data mode ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda3: checking transaction log (hda3) ReiserFS: hda3: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 184k freed Adding 1004052k swap on /dev/hda2. Priority:-1 extents:1 st: Version 20040403, fixed bufsize 32768, s/g segs 256 PCI: Found IRQ 10 for device 0000:00:11.5 PCI: Sharing IRQ 10 with 0000:00:10.2 PCI: Sharing IRQ 10 with 0000:00:11.6 PCI: Setting latency timer of device 0000:00:11.5 to 64 Disabled Privacy Extensions on device ffffffff8050ce00(lo) Linux Kernel Card Services options: [pci] [cardbus] PCI: IRQ 11 for device 0000:00:0a.0 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 11 for device 0000:00:0a.0 PCI: Sharing IRQ 11 with 0000:00:10.1 Yenta: CardBus bridge found at 0000:00:0a.0 [161f:2032] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:0a.0, mfunc 0x01001002, devctl 0x44 Yenta: ISA IRQ mask 0x0020, PCI irq 11 Socket status: 30000006 USB Universal Host Controller Interface driver v2.2 PCI: Found IRQ 9 for device 0000:00:10.0 PCI: Sharing IRQ 9 with 0000:00:0c.0 PCI: Sharing IRQ 9 with 0000:00:11.1 PCI: Sharing IRQ 9 with 0000:00:12.0 PCI: Sharing IRQ 9 with 0000:01:00.0 uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:10.0: irq 9, io base 0000000000001c80 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Found IRQ 11 for device 0000:00:10.1 PCI: Sharing IRQ 11 with 0000:00:0a.0 uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:00:10.1: irq 11, io base 0000000000001ca0 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: Found IRQ 10 for device 0000:00:10.2 PCI: Sharing IRQ 10 with 0000:00:11.5 PCI: Sharing IRQ 10 with 0000:00:11.6 uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3) uhci_hcd 0000:00:10.2: irq 10, io base 0000000000001cc0 uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-1: new low speed USB device using address 2 input: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:10.0-1 ts: Compaq touchscreen protocol output PCI: Found IRQ 10 for device 0000:00:10.3 PCI: Sharing IRQ 10 with 0000:00:13.0 ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:00:10.3: irq 10, pci mem ffffff0000176800 ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected usb 1-1: USB disconnect, address 2 ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1223 $ Ben Collins PCI: Found IRQ 10 for device 0000:00:13.0 PCI: Sharing IRQ 10 with 0000:00:10.3 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[d0002000-d00027ff] Max Packet=[2048] usb 1-1: new low speed USB device using address 3 input: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:10.0-1 ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) usb 1-2: new low speed USB device using address 4 input: USB HID v1.10 Keyboard [Chicony USB Keyboard] on usb-0000:00:10.0-2 input,hiddev96: USB HID v1.10 Device [Chicony USB Keyboard] on usb-0000:00:10.0-2 ieee1394: Host added: ID:BUS[0-00:1023] GUID[000325212900792a] eth1394: $Rev: 1224 $ Ben Collins eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 drivers/usb/input/hid-input.c: event field not found drivers/usb/input/hid-input.c: event field not found eth0: no IPv6 routers present ###################### end of dmesg output ###################### ###################### kernel config ###################### ... # # I2O device support # # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_TSDEV=m CONFIG_INPUT_TSDEV_SCREEN_X=240 CONFIG_INPUT_TSDEV_SCREEN_Y=320 # # Input I/O drivers # CONFIG_GAMEPORT=m CONFIG_SOUND_GAMEPORT=m CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y CONFIG_SERIO_PCIPS2=y # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_SERIAL=m CONFIG_INPUT_TOUCHSCREEN=y # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_INOTIFY=y CONFIG_SERIAL_NONSTANDARD=y CONFIG_ROCKETPORT=m CONFIG_SYNCLINK=m CONFIG_SYNCLINKMP=m CONFIG_N_HDLC=m # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_8250_NR_UARTS=4 # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # # IPMI # # # Watchdog Cards # CONFIG_WATCHDOG=y # # Watchdog Device Drivers # # # PCI-based Watchdog Cards # # # USB-based Watchdog Cards # CONFIG_HW_RANDOM=y CONFIG_NVRAM=y CONFIG_RTC=y # # Ftape, the floppy tape device driver # CONFIG_AGP=y CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL_MCH=m CONFIG_DRM=y CONFIG_DRM_TDFX=m CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m CONFIG_DRM_SIS=m # # PCMCIA character devices # CONFIG_SYNCLINK_CS=m # # I2C support # CONFIG_I2C=y CONFIG_I2C_CHARDEV=m # # I2C Algorithms # CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # CONFIG_I2C_AMD8111=m CONFIG_I2C_ISA=m CONFIG_I2C_NFORCE2=m CONFIG_I2C_VIAPRO=m # # Hardware Sensors Chip support # CONFIG_I2C_SENSOR=m CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_ADM1025=m CONFIG_SENSORS_ADM1031=m CONFIG_SENSORS_DS1621=m CONFIG_SENSORS_IT87=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m CONFIG_SENSORS_LM78=m CONFIG_SENSORS_LM80=m CONFIG_SENSORS_LM83=m CONFIG_SENSORS_LM85=m CONFIG_SENSORS_MAX1619=m CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_W83781D=m CONFIG_SENSORS_W83627HF=m # # Other I2C Chip support # CONFIG_SENSORS_EEPROM=m # # Dallas's 1-wire bus # # # Misc devices # # # PCMCIA devices # # # Open Sound System # # # USB support # CONFIG_USB=y # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_BANDWIDTH=y # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_OHCI_HCD=m CONFIG_USB_UHCI_HCD=m # # USB Device Class drivers # # # USB Bluetooth TTY can only be used with disabled Bluetooth subsystem # CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m CONFIG_USB_STORAGE=m CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_HP8200e=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # # USB Human Interface Devices (HID) # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y CONFIG_USB_HIDDEV=y # # USB Imaging devices # # # USB Multimedia devices # # # USB Network adaptors # CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m CONFIG_USB_USBNET=m # # USB Host-to-Host Cables # CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y CONFIG_USB_BELKIN=y CONFIG_USB_GENESYS=y CONFIG_USB_NET1080=y CONFIG_USB_PL2301=y # # Intelligent USB Devices/Gadgets # CONFIG_USB_ARMLINUX=y CONFIG_USB_EPSON2888=y CONFIG_USB_ZAURUS=y CONFIG_USB_CDCETHER=y # # USB Network Adapters # CONFIG_USB_AX8817X=y # # USB port drivers # CONFIG_USB_USS720=m # # USB Serial Converter support # # # USB Miscellaneous drivers # CONFIG_USB_AUERSWALD=m # # USB Gadget Support # # # Firmware Drivers # CONFIG_EDD=y ... ###################### end of kernel config ###################### -- gentoo-user@gentoo.org mailing list