From: "J. Roeleveld" <joost@antarean.org>
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Booted Gentoo the first time on the Arietta.G25...but...
Date: Wed, 19 Nov 2014 18:50:41 +0100 [thread overview]
Message-ID: <3877A8FB-60D0-4F6A-89B7-9E37D276EF6D@antarean.org> (raw)
In-Reply-To: <20141119174428.GB4095@solfire>
On 19 November 2014 18:44:28 CET, meino.cramer@gmx.de wrote:
>J. Roeleveld <joost@antarean.org> [14-11-19 17:00]:
>> On Tuesday, November 18, 2014 09:00:37 PM thegeezer wrote:
>> > On 18/11/14 18:27, meino.cramer@gmx.de wrote:
>> > > How can I configure Gentoo on the Arietta board
>> > > to use ethernet-over-usb to be started while
>> > > booting the Arietta board?
>> > >
>> > > By "replace everything eth0 with usb0" ??? ;)
>> >
>> > if you still have emdebian image you can boot that and see which
>modules
>> > are loaded - that would be a start. a nice dodge is
>> > # find /sys | grep drivers
>> > you can also check everything in "make menuconfig" under the
>section
>> > device drivers\network device support\usb network adaptors
>> > that everything you _might_ need is selected
>> > there is a chance that the gentoo image has what you need --- what
>does
>> > "lsusb" show you ? what about "ifconfig -a"
>> > usb ethernet devices have very odd names ... names such as
>enp0s29u1u2
>> > so it would be "replace everything eth0 with enp0s29u1u2"
>>
>> Meino,
>>
>> You might also want to check if there is any firmware that is not
>being
>> found/loaded.
>> For me, that is usually the case when something isn't working.
>>
>> --
>> Joost
>>
>
>Hi thegeezer, Hi Joost,
>
>it was that simple, that I *had* to overlooked it: The modules
>for ethernet over usb had to be loaded before using that interface...
>WUMMER!
>Sometimes..... :)
>
>I added the following modules:
> usb_f_rndis
> u_ether
> usb_f_ecm
> usb_f_ecm_subset
> usb_f_eem
> g_ether
> at91_udc
> atmel_usba_udc
> libcomposite
>
>and I am not sure, whether some of them are not necassary for that
>purpose...but with this in /etc/conf.d/modules it works.
>
>Current status is:
>* Board boots with Robert Nelsons linux kernel for ARM and a device
> tree blob by acmesystems and a stage3 rootfs (armv5tel) by the one
> and only Gentoo.
>* The board is accessible via ssh
>* I am currently downloading (emerge -f) some applications I need,
> compiling on this board is an exercise in patience... 8). After
> the download the board can compile the stuff without using my PC
> as router to the internet. So it does not harm to power the board
> with 100mA over several days...
>
>Best regards,
>Meino
You can't use distcc and a crosscompiler on your desktop for this?
--
Joost
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
next prev parent reply other threads:[~2014-11-19 17:50 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-18 18:27 [gentoo-user] Booted Gentoo the first time on the Arietta.G25...but meino.cramer
2014-11-18 21:00 ` thegeezer
2014-11-18 21:16 ` thegeezer
2014-11-19 8:51 ` J. Roeleveld
2014-11-19 17:44 ` meino.cramer
2014-11-19 17:50 ` J. Roeleveld [this message]
2014-11-19 18:12 ` meino.cramer
2014-11-19 21:30 ` thegeezer
2014-11-19 17:52 ` thegeezer
2014-11-19 18:14 ` meino.cramer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3877A8FB-60D0-4F6A-89B7-9E37D276EF6D@antarean.org \
--to=joost@antarean.org \
--cc=gentoo-user@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox