[gentoo-user] Problem while booting 2006.0 LiveCD

[gentoo-user] Problem while booting 2006.0 LiveCD

[Jason Brian Friedrich]

Hi list,

i downloaded the 2006.0 livecd today and tried to boot from it. But 
even with the parameters "gentoo-nofb nodetect noapic nohotplug 
acpi=off nodma nousb noapic nolapic nox debug" the installer hung up 
with the lines:

io scheduler noop registered
io scheduler deadline registered

Then the console freezes completely and i have to do a hard reboot. 
Any other install CDs from Ubuntu to Fedora and Debian works when i 
use "noapic nolapic acpi=off". I included the output of "lspci -v". 
Hope anyone can give me a clue how to get it work on my machine. I do 
not know what to do further.

Jason

::: Hardware installed (lspci -v) :::
:::::::::::::::::::::::::::::::::::::

00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM 
Controller/Host-Hub Interface (rev 02)
	Subsystem: Micro-Star International Co., Ltd.: Unknown device 7280
	Flags: bus master, fast devsel, latency 0
	Memory at e0000000 (32-bit, prefetchable) [size=256M]
	Capabilities: [e4] Vendor Specific Information
	Capabilities: [a0] AGP version 3.0

00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP 
Controller (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, 66Mhz, fast devsel, latency 32
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	Memory behind bridge: fa900000-fe9fffff
	Prefetchable memory behind bridge: bfe00000-dfdfffff

00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB 
UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. 865PE Neo2 (MS-6728)
	Flags: bus master, medium devsel, latency 0, IRQ 11
	I/O ports at cc00 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB 
UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. 865PE Neo2 (MS-6728)
	Flags: bus master, medium devsel, latency 0, IRQ 6
	I/O ports at d000 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB 
UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. 865PE Neo2 (MS-6728)
	Flags: bus master, medium devsel, latency 0, IRQ 10
	I/O ports at d400 [size=32]

00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB 
UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. 865PE Neo2 (MS-6728)
	Flags: bus master, medium devsel, latency 0, IRQ 11
	I/O ports at d800 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 
EHCI Controller (rev 02) (prog-if 20 [EHCI])
	Subsystem: Micro-Star International Co., Ltd. 865PE Neo2 (MS-6728)
	Flags: bus master, medium devsel, latency 0, IRQ 5
	Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
	Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) 
(prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: fea00000-feafffff
	Prefetchable memory behind bridge: dfe00000-dfefffff

00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC 
Interface Bridge (rev 02)
	Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE 
Controller (rev 02) (prog-if 8a [Master SecP PriP])
	Subsystem: Micro-Star International Co., Ltd. 865PE Neo2 (MS-6728)
	Flags: bus master, medium devsel, latency 0, IRQ 10
	I/O ports at <unassigned>
	I/O ports at <unassigned>
	I/O ports at <unassigned>
	I/O ports at <unassigned>
	I/O ports at fc00 [size=16]
	Memory at 50000000 (32-bit, non-prefetchable) [size=1K]

00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA 
Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Micro-Star International Co., Ltd.: Unknown device 0080
	Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 10
	I/O ports at ec00 [size=8]
	I/O ports at e800 [size=4]
	I/O ports at e400 [size=8]
	I/O ports at e000 [size=4]
	I/O ports at dc00 [size=16]

00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus 
Controller (rev 02)
	Subsystem: Micro-Star International Co., Ltd. 865PE Neo2 (MS-6728)
	Flags: medium devsel, IRQ 11
	I/O ports at 0c00 [size=32]

01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 
0047 (rev a1) (prog-if 00 [VGA])
	Subsystem: eVga.com. Corp.: Unknown device e387
	Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11
	Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Memory at c0000000 (32-bit, prefetchable) [size=256M]
	Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
	Expansion ROM at fe9e0000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
	Capabilities: [44] AGP version 3.0

02:02.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 
(rev 07)
	Subsystem: Creative Labs SBLive! 5.1 Model SB0100
	Flags: bus master, medium devsel, latency 32, IRQ 10
	I/O ports at b800 [size=32]
	Capabilities: [dc] Power Management version 1

02:02.1 Input device controller: Creative Labs SB Live! MIDI/Game Port 
(rev 07)
	Subsystem: Creative Labs Gameport Joystick
	Flags: bus master, medium devsel, latency 32
	I/O ports at bc00 [size=8]
	Capabilities: [dc] Power Management version 1

02:03.0 Multimedia video controller: Brooktree Corporation Bt878 Video 
Capture (rev 02)
	Subsystem: Hauppauge computer works Inc. WinTV Series
	Flags: bus master, medium devsel, latency 32, IRQ 6
	Memory at dfefe000 (32-bit, prefetchable) [size=4K]

02:03.1 Multimedia controller: Brooktree Corporation Bt878 Audio 
Capture (rev 02)
	Subsystem: Hauppauge computer works Inc. WinTV Series
	Flags: bus master, medium devsel, latency 32, IRQ 6
	Memory at dfeff000 (32-bit, prefetchable) [size=4K]

02:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 
Gigabit Ethernet (rev 10)
	Subsystem: Micro-Star International Co., Ltd.: Unknown device 728c
	Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 10
	I/O ports at b400 [size=256]
	Memory at feafff00 (32-bit, non-prefetchable) [size=256]
	Expansion ROM at dfe00000 [disabled] [size=128K]
	Capabilities: [dc] Power Management version 2

--
You want to install an RPM and bang --
you have a dependency problem.
		-- Slashdot
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Problem while booting 2006.0 LiveCD

[Daniel da Veiga]

On 3/5/06, Jason Brian Friedrich <mail@lockfile.org> wrote:
> Hi list,
>
> i downloaded the 2006.0 livecd today and tried to boot from it. But
> even with the parameters "gentoo-nofb nodetect noapic nohotplug
> acpi=off nodma nousb noapic nolapic nox debug" the installer hung up
> with the lines:
>
> io scheduler noop registered
> io scheduler deadline registered
>
> Then the console freezes completely and i have to do a hard reboot.
> Any other install CDs from Ubuntu to Fedora and Debian works when i
> use "noapic nolapic acpi=off". I included the output of "lspci -v".
> Hope anyone can give me a clue how to get it work on my machine. I do
> not know what to do further.
>

I don't know exactly what is with those two lines, but if I were you I
would check the md5sum or another way to see if the ISO you downloaded
came right before burning it (again)... I once burned a faulty ISO and
got stuck for a whole afternoon, then simply downloaded the ISO again,
checked it with md5 and burned it again, and it worked.

--
Daniel da Veiga
Computer Operator - RS - Brazil
-----BEGIN GEEK CODE BLOCK-----
Version: 3.1
GCM/IT/P/O d-? s:- a? C++$ UBLA++ P+ L++ E--- W+++$ N o+ K- w O M- V-
PS PE Y PGP- t+ 5 X+++ R+* tv b+ DI+++ D+ G+ e h+ r+ y++
------END GEEK CODE BLOCK------

-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Problem while booting 2006.0 LiveCD

[Jason Brian Friedrich]

On Mon, Mar 06, 2006 at 12:17:50AM -0300, Daniel da Veiga wrote:

> I don't know exactly what is with those two lines, but if I were you I
> would check the md5sum or another way to see if the ISO you downloaded
> came right before burning it (again)... I once burned a faulty ISO and
> got stuck for a whole afternoon, then simply downloaded the ISO again,
> checked it with md5 and burned it again, and it worked.

I double-checked the MD5sum and it is correct. The Install CD works on
another system perfectly well... but this is not the system on which i want to
install Gentoo ;-).

Also the 2005.1 install CD worked well on this machine. But it can not be
the solution just not to use the new install CD.

Jason
-- 
gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Problem while booting 2006.0 LiveCD

[Daniel da Veiga]

On 3/6/06, Jason Brian Friedrich <mail@lockfile.org> wrote:
> On Mon, Mar 06, 2006 at 12:17:50AM -0300, Daniel da Veiga wrote:
>
> > I don't know exactly what is with those two lines, but if I were you I
> > would check the md5sum or another way to see if the ISO you downloaded
> > came right before burning it (again)... I once burned a faulty ISO and
> > got stuck for a whole afternoon, then simply downloaded the ISO again,
> > checked it with md5 and burned it again, and it worked.
>
> I double-checked the MD5sum and it is correct. The Install CD works on
> another system perfectly well... but this is not the system on which i want to
> install Gentoo ;-).
>
> Also the 2005.1 install CD worked well on this machine. But it can not be
> the solution just not to use the new install CD.
>
> Jason
> --
> gentoo-user@gentoo.org mailing list
>
>

Well, it seems like a kernel bug... Maybe you should report it...

--
Daniel da Veiga
Computer Operator - RS - Brazil
-----BEGIN GEEK CODE BLOCK-----
Version: 3.1
GCM/IT/P/O d-? s:- a? C++$ UBLA++ P+ L++ E--- W+++$ N o+ K- w O M- V-
PS PE Y PGP- t+ 5 X+++ R+* tv b+ DI+++ D+ G+ e h+ r+ y++
------END GEEK CODE BLOCK------

-- 
gentoo-user@gentoo.org mailing list