[gentoo-user] I have no sound in my gentoo install.

[gentoo-user] I have no sound in my gentoo install.

[Guillermo]

Hello all,

Basically i have installed gentoo, but i don't have any type of sound, i 
installed pulseaudio and alsa but no one worked fine since i have no sound.

Thanks for your help.

Re: [gentoo-user] I have no sound in my gentoo install.

[Guillermo]

Hello, thanks for the help, i didn't know i was replying to you directly.

I just emerge sys-kernel/gentoo-kernel-bin, rebooted the computer, but 
it didn't worked.

I remember that i got sound working once in a while, however after a 
system update, it didn't work it anymore.

On 18/06/2022 18:41, Julien Roy wrote:
> Hello,
>
> You replied again to me directly. Reply to the list, so other people 
> will see your response, and can help.
>
> If Pavucontrol doesn't show any device, then most likely you are 
> missing drivers for your sound devices, or perhaps your kernel doesn't 
> support sound at all.
>
> A quick way to (try to) fix the problem would be to use a dist-kernel, 
> such as sys-kernel/gentoo-kernel (or sys-kernel/gentoo-kernel-bin) to 
> see whether your issue is in your .config.
> If using those kernels fixes the problem, you can use the `lsmod` 
> command, combined with `lpsci -nnk` to see what drivers are being used 
> for your devices.
>
> From there, you can fix your .config file and revert back to a custom 
> kernel.
>
> Regards,
> Julien
>
> On 6/18/22 10:16, Guillermo wrote:
>> Hello,
>>
>> I installed pavucontrol, however i only get "fake output".
>>
>> If i use the button "show phisical output devices" it shows "no 
>> devices found".
>>
>> Thanks for your help.
>>
>> On 18/06/2022 17:58, Julien Roy wrote:
>>> Hello,
>>>
>>> Have you tried different devices?
>>> As Mark Knecht suggested, try to install media-sound/pavucontrol; it 
>>> is a graphical tool for sound management. Your problem might be as 
>>> simple as unmuting the sound from there.
>>>
>>> Note: you replied to me directly; please reply to the mailing list 
>>> instead, so other people can see your response as well.
>>>
>>> Regards,
>>> Julien
>>>
>>> On 6/18/22 09:49, Guillermo wrote:
>>>> Hello,
>>>>
>>>> I tried the troubleshooting section of the gentoo wiki, but it 
>>>> didn't work, i don't know which info should i give you in order to 
>>>> help me.
>>>>
>>>> I already put my volume at maximum using the alsamixer tool and 
>>>> also i unmuted the volume, nothing works.
>>>>
>>>> Regards.
>>>>
>>>> On 18/06/2022 17:36, Julien Roy wrote:
>>>>> Hello Guillermo,
>>>>>
>>>>> Without more information, it's impossible to help you.
>>>>>
>>>>> I will refer you to the Gentoo Wiki article about Pulseauddio. 
>>>>> Have you followed this?
>>>>> https://wiki.gentoo.org/wiki/PulseAudio
>>>>>
>>>>> Specifically, check out the troubleshooting section. It contains 
>>>>> useful information for common problems.
>>>>>
>>>>> Some other common problems are missing drivers in your kernel 
>>>>> .config. Try different devices to see if you manage to have sound 
>>>>> on them. By different devices, I mean different "protocols", such 
>>>>> as a pair of headphones using a Jack plug, a USB sound device, or 
>>>>> HDMI through your monitor, if you have it. If it works on some 
>>>>> devices, then you are definitely missing drivers.
>>>>>
>>>>> If you still cannot figure it out, feel free to reply to this list 
>>>>> again, but this time try to give us more info, such as what you 
>>>>> tried, perhaps some logs with relevant information.
>>>>>
>>>>> On 6/18/22 09:07, Guillermo wrote:
>>>>>> Hello all,
>>>>>>
>>>>>> Basically i have installed gentoo, but i don't have any type of 
>>>>>> sound, i installed pulseaudio and alsa but no one worked fine 
>>>>>> since i have no sound.
>>>>>>
>>>>>> Thanks for your help.
>>>>>>
>>>>>>

Re: [gentoo-user] I have no sound in my gentoo install.

[Mark Knecht]

[-- Attachment #1: Type: text/plain, Size: 758 bytes --]

On Sat, Jun 18, 2022 at 8:07 AM Guillermo <guillermo18barresiones@gmail.com>
wrote:
>
> Hello all,
>
> Basically i have installed gentoo, but i don't have any type of sound, i
> installed pulseaudio and alsa but no one worked fine since i have no
sound.
>
> Thanks for your help.
>

If you're going to run pulseaudio then consider starting with pavucontrol
to see what PA thinks is going on.

Consider running also-info which should save a file to /tmp with info.

Consider running alsmixer to see what sound device, if any, is selected.

Consider searching for wave files (locate *.wav) and playing one using
aplay:

aplay /usr/local/MATLAB/R2018b/toolbox/signal/sigdemos/guitartune.wav

Consider posting back more info when you've got some to share.

Mark

[-- Attachment #2: Type: text/html, Size: 986 bytes --]

Re: [gentoo-user] I have no sound in my gentoo install.

[Julien Roy]

[-- Attachment #1.1: Type: text/plain, Size: 1144 bytes --]

Hello Guillermo,

Without more information, it's impossible to help you.

I will refer you to the Gentoo Wiki article about Pulseauddio. Have you 
followed this?
https://wiki.gentoo.org/wiki/PulseAudio

Specifically, check out the troubleshooting section. It contains useful 
information for common problems.

Some other common problems are missing drivers in your kernel .config. 
Try different devices to see if you manage to have sound on them. By 
different devices, I mean different "protocols", such as a pair of 
headphones using a Jack plug, a USB sound device, or HDMI through your 
monitor, if you have it. If it works on some devices, then you are 
definitely missing drivers.

If you still cannot figure it out, feel free to reply to this list 
again, but this time try to give us more info, such as what you tried, 
perhaps some logs with relevant information.

On 6/18/22 09:07, Guillermo wrote:
> Hello all,
> 
> Basically i have installed gentoo, but i don't have any type of sound, i 
> installed pulseaudio and alsa but no one worked fine since i have no sound.
> 
> Thanks for your help.
> 
> 

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 495 bytes --]

Re: [gentoo-user] I have no sound in my gentoo install.

[Dale]

Guillermo wrote:
> Hello all,
>
> Basically i have installed gentoo, but i don't have any type of sound,
> i installed pulseaudio and alsa but no one worked fine since i have no
> sound.
>
> Thanks for your help.
>
>
> .
>


In addition to what others mentioned, make sure you unmute ALL audio
devices in ALL software.  I use ALSA here but if I recall correctly, I
had to unmute three separate pieces of software to get sound working. 
Also, adjust volume levels as well.  I think setting a value of half, 50
in most controls, will get you some sound.  Later you can come back and
adjust if needed. 

Hope that helps.

Dale

:-)  :-) 

Re: [gentoo-user] I have no sound in my gentoo install.

[Julien Roy]

[-- Attachment #1.1: Type: text/plain, Size: 1977 bytes --]

Hello,

Have you tried different devices?
As Mark Knecht suggested, try to install media-sound/pavucontrol; it is 
a graphical tool for sound management. Your problem might be as simple 
as unmuting the sound from there.

Note: you replied to me directly; please reply to the mailing list 
instead, so other people can see your response as well.

Regards,
Julien

On 6/18/22 09:49, Guillermo wrote:
> Hello,
> 
> I tried the troubleshooting section of the gentoo wiki, but it didn't 
> work, i don't know which info should i give you in order to help me.
> 
> I already put my volume at maximum using the alsamixer tool and also i 
> unmuted the volume, nothing works.
> 
> Regards.
> 
> On 18/06/2022 17:36, Julien Roy wrote:
>> Hello Guillermo,
>>
>> Without more information, it's impossible to help you.
>>
>> I will refer you to the Gentoo Wiki article about Pulseauddio. Have 
>> you followed this?
>> https://wiki.gentoo.org/wiki/PulseAudio
>>
>> Specifically, check out the troubleshooting section. It contains 
>> useful information for common problems.
>>
>> Some other common problems are missing drivers in your kernel .config. 
>> Try different devices to see if you manage to have sound on them. By 
>> different devices, I mean different "protocols", such as a pair of 
>> headphones using a Jack plug, a USB sound device, or HDMI through your 
>> monitor, if you have it. If it works on some devices, then you are 
>> definitely missing drivers.
>>
>> If you still cannot figure it out, feel free to reply to this list 
>> again, but this time try to give us more info, such as what you tried, 
>> perhaps some logs with relevant information.
>>
>> On 6/18/22 09:07, Guillermo wrote:
>>> Hello all,
>>>
>>> Basically i have installed gentoo, but i don't have any type of 
>>> sound, i installed pulseaudio and alsa but no one worked fine since i 
>>> have no sound.
>>>
>>> Thanks for your help.
>>>
>>>

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 495 bytes --]

Re: [gentoo-user] I have no sound in my gentoo install.

[Julien Roy]

[-- Attachment #1.1: Type: text/plain, Size: 3117 bytes --]

Hello,

You replied again to me directly. Reply to the list, so other people 
will see your response, and can help.

If Pavucontrol doesn't show any device, then most likely you are missing 
drivers for your sound devices, or perhaps your kernel doesn't support 
sound at all.

A quick way to (try to) fix the problem would be to use a dist-kernel, 
such as sys-kernel/gentoo-kernel (or sys-kernel/gentoo-kernel-bin) to 
see whether your issue is in your .config.
If using those kernels fixes the problem, you can use the `lsmod` 
command, combined with `lpsci -nnk` to see what drivers are being used 
for your devices.

 From there, you can fix your .config file and revert back to a custom 
kernel.

Regards,
Julien

On 6/18/22 10:16, Guillermo wrote:
> Hello,
> 
> I installed pavucontrol, however i only get "fake output".
> 
> If i use the button "show phisical output devices" it shows "no devices 
> found".
> 
> Thanks for your help.
> 
> On 18/06/2022 17:58, Julien Roy wrote:
>> Hello,
>>
>> Have you tried different devices?
>> As Mark Knecht suggested, try to install media-sound/pavucontrol; it 
>> is a graphical tool for sound management. Your problem might be as 
>> simple as unmuting the sound from there.
>>
>> Note: you replied to me directly; please reply to the mailing list 
>> instead, so other people can see your response as well.
>>
>> Regards,
>> Julien
>>
>> On 6/18/22 09:49, Guillermo wrote:
>>> Hello,
>>>
>>> I tried the troubleshooting section of the gentoo wiki, but it didn't 
>>> work, i don't know which info should i give you in order to help me.
>>>
>>> I already put my volume at maximum using the alsamixer tool and also 
>>> i unmuted the volume, nothing works.
>>>
>>> Regards.
>>>
>>> On 18/06/2022 17:36, Julien Roy wrote:
>>>> Hello Guillermo,
>>>>
>>>> Without more information, it's impossible to help you.
>>>>
>>>> I will refer you to the Gentoo Wiki article about Pulseauddio. Have 
>>>> you followed this?
>>>> https://wiki.gentoo.org/wiki/PulseAudio
>>>>
>>>> Specifically, check out the troubleshooting section. It contains 
>>>> useful information for common problems.
>>>>
>>>> Some other common problems are missing drivers in your kernel 
>>>> .config. Try different devices to see if you manage to have sound on 
>>>> them. By different devices, I mean different "protocols", such as a 
>>>> pair of headphones using a Jack plug, a USB sound device, or HDMI 
>>>> through your monitor, if you have it. If it works on some devices, 
>>>> then you are definitely missing drivers.
>>>>
>>>> If you still cannot figure it out, feel free to reply to this list 
>>>> again, but this time try to give us more info, such as what you 
>>>> tried, perhaps some logs with relevant information.
>>>>
>>>> On 6/18/22 09:07, Guillermo wrote:
>>>>> Hello all,
>>>>>
>>>>> Basically i have installed gentoo, but i don't have any type of 
>>>>> sound, i installed pulseaudio and alsa but no one worked fine since 
>>>>> i have no sound.
>>>>>
>>>>> Thanks for your help.
>>>>>
>>>>>

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 495 bytes --]

Re: [gentoo-user] I have no sound in my gentoo install.

[Jack]

You have still not provided anywhere near enough information for us to 
help you.

What sound device are you trying to use?  Built into the motherboard?  
Plug in USB?  Bluetooth?  Is there any chance that sound is turned off 
in your BIOS settings?  Are you sure the kernel module to drive your 
device is either built in to the kernel or as a module and loaded?

Just saying "I tried and it didn't work" is not enough information.  Is 
there anything about sound in dmesg or /var/log/messages?  What init 
system are you using?  systemd, openrc, or something else?  Does that 
need any service started for sound?

All the previous replies gave you more questions, which you have not yet 
answered.

In terms of replying to the list or the person who sent the message to 
which you are replying, look at the "To:" field in your email software 
before you hit "Send."  You need to see the list address there.  Your 
email software probably has a  "Reply Group" or "Reply List" button.  If 
not, you may need to use "Reply All" and not just "Reply."

Jack

On 6/18/22 10:58, Guillermo wrote:
> Hello, thanks for the help, i didn't know i was replying to you directly.
>
> I just emerge sys-kernel/gentoo-kernel-bin, rebooted the computer, but 
> it didn't worked.
>
> I remember that i got sound working once in a while, however after a 
> system update, it didn't work it anymore.
>
> On 18/06/2022 18:41, Julien Roy wrote:
>> Hello,
>>
>> You replied again to me directly. Reply to the list, so other people 
>> will see your response, and can help.
>>
>> If Pavucontrol doesn't show any device, then most likely you are 
>> missing drivers for your sound devices, or perhaps your kernel 
>> doesn't support sound at all.
>>
>> A quick way to (try to) fix the problem would be to use a 
>> dist-kernel, such as sys-kernel/gentoo-kernel (or 
>> sys-kernel/gentoo-kernel-bin) to see whether your issue is in your 
>> .config.
>> If using those kernels fixes the problem, you can use the `lsmod` 
>> command, combined with `lpsci -nnk` to see what drivers are being 
>> used for your devices.
>>
>> From there, you can fix your .config file and revert back to a custom 
>> kernel.
>>
>> Regards,
>> Julien
>>
>> On 6/18/22 10:16, Guillermo wrote:
>>> Hello,
>>>
>>> I installed pavucontrol, however i only get "fake output".
>>>
>>> If i use the button "show phisical output devices" it shows "no 
>>> devices found".
>>>
>>> Thanks for your help.
>>>
>>> On 18/06/2022 17:58, Julien Roy wrote:
>>>> Hello,
>>>>
>>>> Have you tried different devices?
>>>> As Mark Knecht suggested, try to install media-sound/pavucontrol; 
>>>> it is a graphical tool for sound management. Your problem might be 
>>>> as simple as unmuting the sound from there.
>>>>
>>>> Note: you replied to me directly; please reply to the mailing list 
>>>> instead, so other people can see your response as well.
>>>>
>>>> Regards,
>>>> Julien
>>>>
>>>> On 6/18/22 09:49, Guillermo wrote:
>>>>> Hello,
>>>>>
>>>>> I tried the troubleshooting section of the gentoo wiki, but it 
>>>>> didn't work, i don't know which info should i give you in order to 
>>>>> help me.
>>>>>
>>>>> I already put my volume at maximum using the alsamixer tool and 
>>>>> also i unmuted the volume, nothing works.
>>>>>
>>>>> Regards.
>>>>>
>>>>> On 18/06/2022 17:36, Julien Roy wrote:
>>>>>> Hello Guillermo,
>>>>>>
>>>>>> Without more information, it's impossible to help you.
>>>>>>
>>>>>> I will refer you to the Gentoo Wiki article about Pulseauddio. 
>>>>>> Have you followed this?
>>>>>> https://wiki.gentoo.org/wiki/PulseAudio
>>>>>>
>>>>>> Specifically, check out the troubleshooting section. It contains 
>>>>>> useful information for common problems.
>>>>>>
>>>>>> Some other common problems are missing drivers in your kernel 
>>>>>> .config. Try different devices to see if you manage to have sound 
>>>>>> on them. By different devices, I mean different "protocols", such 
>>>>>> as a pair of headphones using a Jack plug, a USB sound device, or 
>>>>>> HDMI through your monitor, if you have it. If it works on some 
>>>>>> devices, then you are definitely missing drivers.
>>>>>>
>>>>>> If you still cannot figure it out, feel free to reply to this 
>>>>>> list again, but this time try to give us more info, such as what 
>>>>>> you tried, perhaps some logs with relevant information.
>>>>>>
>>>>>> On 6/18/22 09:07, Guillermo wrote:
>>>>>>> Hello all,
>>>>>>>
>>>>>>> Basically i have installed gentoo, but i don't have any type of 
>>>>>>> sound, i installed pulseaudio and alsa but no one worked fine 
>>>>>>> since i have no sound.
>>>>>>>
>>>>>>> Thanks for your help.
>>>>>>>
>>>>>>>
>

Re: [gentoo-user] I have no sound in my gentoo install.

[Peter Humphrey]

On Saturday, 18 June 2022 19:35:54 BST Jack wrote:

> In terms of replying to the list or the person who sent the message to
> which you are replying, look at the "To:" field in your email software
> before you hit "Send."  You need to see the list address there.  Your
> email software probably has a  "Reply Group" or "Reply List" button.  If
> not, you may need to use "Reply All" and not just "Reply."

He's using Thunderbird, according to the User Agent header, in case that 
helps.

As to the problem, far be it from me to suggest sound fixes!

-- 
Regards,
Peter.