Re: [gentoo-user] Gentoo from ext3 to ext4

[reQuiem23 <niklas.baumstark@gmail.com>]

Joshua Murphy-2 wrote:
> 
> On Fri, Jan 30, 2009 at 11:48 AM, reQuiem23 <niklas.baumstark@gmail.com>
> wrote:
>>
>> Hi all,
>>
>> i just had the idea to make a new ext4 partition (via mkfs.ext4) and copy
>> (cp) my whole root-dir into that new partition, change the /etc/fstab,
>> add
>> an entry to the grub.conf and booting into that new partition. My /boot
>> is
>> on a separate ext3 partition, so this is not a problem. The kernel i use
>> is
>> gentoo-sources 2.6.28-r1 with ext4-support enabled. However, when i want
>> to
>> boot into my new system, the system starts, even the uvesafb starts, but
>> than the booting process stops with a message like "tty starting" and the
>> system reboots.
>>
>> I removed all the files in /proc /dev and /sys, so probably this could be
>> the cause of the problem. Or does anyone have an idea what could be the
>> problematic factor here? unfortunately i can't provide any logging
>> information because i can't get to a working shell :(
>>
>> Greetings,
>> Niklas
> 
> Make sure you have /dev/console and /dev/null in place ... it's needed
> *before* /dev is mounted over with tmpfs for udev.
> 
> 

can i just copy these from my existing setup? I'll try that, thanks for the
hint

-- 
View this message in context: http://www.nabble.com/Gentoo-from-ext3-to-ext4-tp21750949p21751259.html
Sent from the gentoo-user mailing list archive at Nabble.com.